Related
Hi all , I 've bought a ppc Asus P525 chinese ROm . Now I want to change the WWE Rom . ANyone have this Rom plwase PM me bye Yahoo messenger or this forum , thanks . Y!M : [email protected]
Any luck?
Did anyone contacted you?
I am looking for such a ROM myself.
Anyboby have it ? Please send it to me
i wrote so big post about my experiens with P525 and at last pressed on smile and opened new page deleted all i wrote
have no mood to write it again. I will tell shortly:
I also have P525 chinese version (TW CHT version)
1) currently, i don't know how to grab whole ROM from P525.
itsutils can grab whole ROM excluding bootloader. Grabber like Grab_it grabs only garbage and thus completely useless. ROM type is DOC (TrueFFS) which according what i found is hard to grab. If anyone knows how to grab ROM fully - tell me how.
2) Flashing only OS rom and without checksum is at first unknown procedure and at second can make from your P525 just expensive brick. Size of different language ROMs of P525 varies greately. Also, some P525 ROMS have extended ROM while others no. Taiwanese version has 3MB extended rom where KKBOX installer resides. It's easy to unhide it and remove KKBOX to free space for some other apps. HK version has no KKBOX, so i don't know is extended ROM present there or not. TW model has 61.75 of user storage space. IS there any HK users? how much user storage space in HK version? it can answer question: is there extended ROM in HK version or not. English version has 74MB (!!!) of free storage space and has no extended ROM. So, flashing different language OS (if to know how to flash) will probably lead device to non-responsible state.
3) there is bootloader flasher. you can enter it by holding down "record" button and press reset. But this flasher doesn't accept neither standard ROM update from ASUS site nor decrypted and renamed ROM. For me it tells that language is different. Ridiculous.. May be it will accept english ROM? Also, quick looking in hex editor i can see that bootloader can accept different file names and some strings relative to serial mode (console). Seems bootloader can be switched to different modes, but i don't know how to do this. Currently, in flasher mode P525 not recognized by desktop computer. even no any sound or other reaction telling that something pluggen into USB. Would be good to find more info about bootloader of ASUS P525.
Summary of key combination while pressing reset button (or turn on)
1) Hold jostick up -> enter to hard reset menu
2) Hold down record button (it's near camera button) -> enter to bootloader's flasher.
Meantime i mage english transformation installer for P525. After that P525 becomes fully english, till next hard reset of course. It eats user storage space of course, but at least my P525 is fully english!
Well, i'm not sure what is better: have CHT version + english transformation or ENG + chinese font and input because i need to read and write both languages. Actually, my chinese is very bad (only beginning) i defnately need english interface. What i like most in english ROM is 74MB of user storage space!!
May be some guru will have this wonderful device (much better than any available HTC device now) and will share some hacks :roll:
by the way, a week ago, ASUS had new update for HK and TW versions. After couple of days it has been removed. Anyone knows why?
I compared files: changes in couple of BT files, many updated files in Voice commander. That's all if i recall right. I didn't try to flash it yet.
ok. i programmed english ROM to my P525! works great!
now Storage space is 74MB! (61MB was with chinese version)
i'm continuing my monolog. Seems everybody with P525 only waiting for info..
after digging in bootloader code i found:
- found procedure to calculate checksum. this allowed me to flash english ROM dumped from english P525.
- Bootloader has several modes.
- key combinations for flashing different part of ROM. You need keep these buttons while pressing "reset" button (or while turning on):
1) Photo - update ROMGalaxy.nb0 (ROM without bootloader)
2) Record - update BootGalaxy.nb0 (only bootloader)
3) Photo+Record - update Galaxy.nb0 (whole ROM)
4) Photo+Record+Joistick_Action - USB Console mode
There is some check for Jostick_UP mode. I'm not sure if it can switch to another update mode or it's just for hardreset because Jostick_Up used for HR as well. ARM assembler for me is new. I used to read x86 assembler
Also, bootloader can accept standard ROM update from ASUS site - Galaxy.cap, but i didn't find the way of activate such mode. Probably it may be activated only by update application by calling this mode through IOCTRL function.
Another unclear thing is USB Console mode. I can connect to phone by mtty as to USB COM (something like \\USB_blah_blah - i don't remember exact name), but any attempt to type something doesn't produce any echo to screen. Either bootloader can not echoing or requires to type some authorisation command to unlock console mode. Or may be this mode support only direct file transfer without any commandline interface..
Bad thing is that nobody except me explore P525
Good thing about P525 ROM is that understandable by imgfs tools! No extra work required to dump all files and modules. and with no error! I guess, imgfs tools can compile new ROM also without errors. Opened door to ROM kitchen as for himalaya in the past?
Actually, i would like to add/modify/remove some components (like T9 languages). Since, i can flash old ROM anytime if cooked ROM will not work, why don't try.. just need to find some spare time and enough courage
Well mate, all this sound very good.
I am waiting to have some money and get one of those p525.
sorg. Great work!!
I also had lots of fun with the Flash process. Just found out that if I use the AC adaptor, the bootloader will complain "checksum error" while using the USB cable will not. I believe this is due to the design of the USB port (remember that the cable's 2nd,3nd legs are shorted)
I had successfully flashed the ENG ROM. However, now I would like to get the T9 CHT input back. I had tried to use the Asus "official" rom to flash the CHT version back (HK ver.) but the device keep complaining the "region" is not correct (I had already set the language ID to 0 , I believe this "error" should be caused by the extended ROM, but will try later when I got the CHT ROM )
Is there any tricks I had to do to modify the original galaxy.cap ROM image so that I could flash it though the boot loader instead of the ASUS official flash tools? or could you kindly upload the HK-CHT .nb0 ROM?
Deeply apprciate your help!
Cheers!
Hum, maybe using imgfs to dump the T9 input module out should be fine for us, sorg. (coz I need both ENG and CHT but need the ENG interface.... )
haha, mind to share how to manage the official ROM to .nb0 ROM? so that I could cook the ROM as well. HUM, getting the answering machine from GSMART-i and background-mixer than cook them into P525 should be very delicious. wahahaha
i gave you CHT ROM for bootloader flasher in PM.
Currently, i'm in final stage of my cooked ROM. It's based on english v3.29. I added chinese font/nls/input(T9, HW and SIP) and some other useful utilities. Also, since i'm russian i added russian input as well.
I think i will finish testing in couple of days.
Dear sorg,
Thanks a million for your guidience. I am browsing online materials and want to try to cook my own ROM. I had a friend who have a g-smart i WM phone. The phone comes with a s/w answering machine and a very good "background mixer" (which you can pretend you are in a busy environment during telephone call). Therefore, I would like to dump his ROM and check to see if I could use fsimg tool to get these 2 program out. can you show me a road to useful information?
(P.S. I had suspected that the ASUS autorun.exe block the flash process.... but just can't find where the "regional setting" is located in..... thanks for your bright help! YOU ARE NOW ANNOUNCED THE P525 GURU!!! )
Cheers! Cheers! Cheers!
can you extract files and registry related to cheating utility from GSMART's ROM (or give me link to such ROM and name of exe file)?
i will try to put it into ROM.
Structure of P525 ROM is relatively easy. To decrypt ROM you have to XOR whole galaxy.cap file by mask A87BC0DF. Then you may use imgfs_tools utilities
But to flash ROM back you have to calculate checksumm of new ROM. I don't want publush function right now because it's still dangerous. not much known yet about P525 ROM. For example, flashing with wrong language and fail will lock your device to that language which probably you don't know. And if device will not able to finich boot to OS you will not able to use language unlock utility. I also found problem to flash bigger ROM update through bootloder's flasher. it always fail. Only way to update to bigger ROM is to use official chinese update galaxy.cap and only after that use hand-made ROM with the same or smaller size. Once you programmed smaller size, you will not able to program bigger one. Again have to use chinese official update.
I don't know why it happens. So, it's not right time to spread tools. When most things will be known then it will be safe to release.
ah, didn't see question about ROM dumping.
I thing, it's better to find update first.
Dumping works not on all phones. You may try to use itsutils. There is utility pdocread.exe which can dump TrueFFS DOC.
Hi sorg,
I had copied the pdocread.exe to the sd-card and run it on my friend's g-smart-i. It caused his phone to freeze..... I re-tried for a few time and now he refused to borrow it to me to continue the experiment... >_< (I should not do the experiment in front of him, and should poke the reset button secretly, hahaha) Well, I will continue to try to get the ROM, once I had successfully dump it out, will let you know at once!
What I intended to do is to use an ENG rom, use a 3rd party CHINESE engine (which I can turn off when not needed) and have the T9 input always resident in memory...... I had tried to copy all T9*.* to the /windows directory and imported the T9IME registry entry from CHT ROM to ENG ROM. It doesn't work at all, the result is that I am unable to change T9's mode (e.g. only able to input 123, can't even change to input ENG / T9 ENG). Waiting for your advice!
Cheers!
pdocread should be run on Desktop computer while PDA connected through activesync. Also you should enable RAPI on PDA (look for enable_rapi.cab on this forum).
Actually, i revised my archive or ROMs and found one version from GSmart. So, i think, no need frighten your friend anymore
unfortunately, i couldn't make neither AnswerMachine nor PhoneRec/Environment Cheater to work. Actually, all these three apps are pretending to work on P525. I can listen example of environment cheater in settings, AnswerMachine picks the phone in right time, PhoneRec opens dialog where progess of recording should be visible, but neither playback to phoneline nor record from there are workining There is topic about porting these apps on buzzdev board but so far no any positive results. Probably, gigabyte has some specific hardware allowing to interat with phone line, but all other Phones has no such ability
We are lucky that at least P525 allows record phone conversation (through any available recording software)! Most HTC devices have no even such feature!
please follow to this topic http://forum.xda-developers.com/showthread.php?t=279777
there is discussion about P525 ROM(s) with modified version i published.
any questions to me please ask in that topic.
sorg said:
i'm continuing my monolog. Seems everybody with P525 only waiting for info..
after digging in bootloader code i found:
- found procedure to calculate checksum. this allowed me to flash english ROM dumped from english P525.
- Bootloader has several modes.
- key combinations for flashing different part of ROM. You need keep these buttons while pressing "reset" button (or while turning on):
1) Photo - update ROMGalaxy.nb0 (ROM without bootloader)
2) Record - update BootGalaxy.nb0 (only bootloader)
3) Photo+Record - update Galaxy.nb0 (whole ROM)
4) Photo+Record+Joistick_Action - USB Console mode
There is some check for Jostick_UP mode. I'm not sure if it can switch to another update mode or it's just for hardreset because Jostick_Up used for HR as well. ARM assembler for me is new. I used to read x86 assembler
Also, bootloader can accept standard ROM update from ASUS site - Galaxy.cap, but i didn't find the way of activate such mode. Probably it may be activated only by update application by calling this mode through IOCTRL function.
Another unclear thing is USB Console mode. I can connect to phone by mtty as to USB COM (something like \\USB_blah_blah - i don't remember exact name), but any attempt to type something doesn't produce any echo to screen. Either bootloader can not echoing or requires to type some authorisation command to unlock console mode. Or may be this mode support only direct file transfer without any commandline interface..
Bad thing is that nobody except me explore P525
Good thing about P525 ROM is that understandable by imgfs tools! No extra work required to dump all files and modules. and with no error! I guess, imgfs tools can compile new ROM also without errors. Opened door to ROM kitchen as for himalaya in the past?
Actually, i would like to add/modify/remove some components (like T9 languages). Since, i can flash old ROM anytime if cooked ROM will not work, why don't try.. just need to find some spare time and enough courage
Click to expand...
Click to collapse
hey sorg, i cant get usb console mode, can you get me a hand???
i want to make a spanish WM6 version, based on the rom of misar.
can you help me here?
thanks..!!!
I just bought a o2 xda 2s on ebay.
I was wanting a pocket pc phone that i could hook up to a serial port device I use at work.
The phone works great so far but when i installed the program i use at work everytime i try to load a file it freeze's while trying to load file. I have used this program on HP pda's with not 1 issue. Just wanted to have a all in 1 handheld unit.
Currently this is what I have:
Model: ph20b Pocket PC
wm2003se
version 4.21.1088 (build 15045.2.6.0)
rom version 1.40.00 WWE
rom date 3/10/05
radio version 1.12.00
protocol version 1337.42
ext. rom version 1.40.242 WWE
What would make it freeze like it does, only with this program, and can i upgrade to wm5 (how?). Are there any other upgrades you know would make it more stable a fix the freezing issue?
This is the first pocket pc phone i have had so i have no idea as to what,where and how to start fixing.
Thanks for any help you guys may provide!!!!
For WM5 look here http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home my signature shows what Rom I use. I find it good. I don't what could be causing the freezing. What is the program?
Here is a link to software im using.
http://www.racetech.com/SubMenu.asp?cMenu=11&c=Yes&cSubMenu=92&showPage=da
I have read the info on ba wm5 rom and still dont know how to install. i use a pc to check email and thats it, so im a little new to this stuff.
Can someone help step-by-step me through this a little
do i need a sd card as i don't have one. to update to wm5
The phone is new and i dont' have any data on it that i need.
Thanks Guys
I have downloaded the following file on my PC Desktop.
Helmi_wm2k5_aku3.2_32mb (rar file)
I extrexcted it in its own new file and now have the following files.
1)extrom
2)AddOn
3)ph20b
4)ph20b1
5)wm2k5_aku3.2_32mb_v1.3.2
6)Helmi_aku3.2_v1.3.2.txt
what next?
Yes you would need a SD card you can get a 1gb really cheap on ebay and then you can store programs etc on it.
Well I must confess I haven't done it I bought mine of ebay with WM5 on it already. The fellow I bought mine off will upgrade other units for $150 AUS I think. If you aren't in Aus he still would proberly do it.
i got wm5 in an exe file from www.buzzdev.net i think and all i had to do was put my xda 2s in boot loader mode stick it in its cradle and run the file easy peasy
you DO - NOT need an SD card (i did it , i dont have one)
here is the guide to install
http://wiki.xda-developers.com/index.php?pagename=Helmi
i DID NOT DO THE OPTIONAL INTERNAL MEMORY BIT
Copy the nk.nbf file to folder that match ur device (PH20B/PH20B1)
* Determine your operator Information e.g.: "T-MOB101", or "Vodafone", or O2. See GetDeviceData.
* Open a command prompt, (open "run", type cmd , press enter), go to the folder where the ROM(nk.nbf) file resides (mine is c C:\Documents and Settings\Administrator\Desktop\pda\oprade\Helmi\PH20B - notice the c is the command) and execute: SetOperator ??? (where ??? is your operator , mine was SetOperator ORANG001)
# Put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button
# Connect the phone to the sync cable/cradle.
# Now you can upgrade the ROM using BaUpgradeUt.exe(i used this one) / MaUpgradeUt_noID.exe
#
When the upgrade is completed, you must perform a Hard Reset
1.
Press and hold the "Power" button, and then press the Reset Button. Colored stripes (the bootscreen) will appear on the screen.
*
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
o Quickly press "Record" & "Camera" before the versions appear at bottom right
o OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
*
If you have a PH20B1 device such as SX66:
o Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
o OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
2.
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
* If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
* If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
3. Press the "Mail" button. A white screen will show for a while, while it is clearing your device in preparation for the new ROM to start executing
4. When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly ...
once done copy what you need (i installed all the fixes etc) from the extrom folder to your ppc and run them to install them (once done delete the cabs)
*note doing this way you will need to setup your gprs and mms settings for your network*
Ok I'm going crazy. Where in the heck do I find setoperator.bat??
Thanks
Where is it located? Every search I've found says it's in \windows directory, but it isn't there. Has it been changed with the latest T-mobile software?
I'm running WM6 (latest from T-mobile)
I wanted to move the Spanish ñ to the top of the list so it requires fewer keypresses to enter.
Any advice would be hugely appreciated.
perhaps, I'm asking the wrong question...
Is there a way to change/add/reorder the "special symbols" available in the symbols menu (when you press the sym/camera key in text mode)?
As of now I've been unable to locate the file that contains those characters. Several google's on the subject have directed me to look for a file named "sym.txt" in the windows directory however it appears to not exist in the T-mobile wm6 ROM. I assume the file (perhaps renamed or in a different file format or embedded in another font file) must exist somewhere on the device however, I've searched all over every directory and dragged everything that looked remotely like it could be it to the desktop to view with notepad.
No dice. It's driving me nuts. I'm hoping someone in here knows just what file the symbol key draws it's data from.
Please help
Well, I gave up
But as necessity is the mother of invention I figured out a much better and easier solution (for me anyway).
I just edited the "eT9.Excalibur.0409.kmap.txt" file so that instead of an "&" when I hold down the "n" key (or alt-n) I get an "ñ".
{N N ñ ñ 0x18} instead of {N N & & 0x18}
The cool thing is it gives a capital "Ñ" in cap-lock mode too if I access the alt text
I like it. Now that I know how easy it is to personalize the keys I might just make another adjustment or 2
By the way
Could that tiny modification cause problems I'm unaware of? Hope not.
I wasn't expecting to do this, but I had a 2 hour delay at my college due to snowy weather, so I decided to take the time to upload my 1st official WM6.5 rom for the Asus A6x6 early. Keep in mind that this rom is far from perfect and the fancy new WM6.5 today screen is not working (looks like the today screen from WM6/6.1).
Thanks to Makuu (for helping to get me started), Lenny, AstainHellbring (thank you for all the nightly help sessions), the creators of the tools I used to make this rom, and anyone else that I failed to mention in name who gave me the knowledge to complete this rom.
Asus Mypal A6x6 WM6.5 version 1a
Windows CE version 5.2.21234 (Build 21234.5.0.1)
This was tested on an Asus Mypal A626 (and works). It should work with the A686/A696, but the other models were not tested. Any other models not metioned above WILL NOT WORK.
Updates
1. os build
2. bug fixes
Additions
1. Windows Marketplace
2. File Dialogue Changer
3. PsShutXP
Removals (you can reinstall these via windows marketplace)
1. Windows Live
2. MS Office Mobile (get the beta from marketplace)
Removals (non-Windows Marketplace)
1. Remote Desktop Mobile
download: http://www.easy-share.com/1909744620/Asus_A6x6_WM65_1a.rar
At this time, this will be the only download link. Mirrors will be created in the future (after I give permission).
Instructions (I have included a txt file with same instructions for offline convenience)
Before you do anything, make sure you have at least a 256mb SD card and a card reader (you can get one at a place like Radio Shack or Office Depot). You also need to install winrar (found at http://www.win-rar.com/download.html). Your SD card must be formatted with the FAT16 file system.
To format your SD Card with the FAT16 file system
Step 1: To do this insert the SD Card into the reader and go to "My Computer".
Step 1a: BACKUP YOUR FILES before you start!!
Step 2: Right-click the drive letter of the SD Card reader (differs for each computer, probably either E:\ or F:\ or G:\) and click "Format".
Step 2a: Don't worry about any of the options except for file system, choose "FAT"
Step 3: Click "Start" and wait until it is done
Step 1: Get (OS) rom image
Step 2: Extract files to any folder on hard drive using Winrar
Step 3: Go to the folder where you extracted the files in the RAR archive
Step 4: Make sure that the filename is "CANNES_A_WM6.img"
Step 4a: if the img file it's not exactly "CANNES_A_WM6.img", rename it to that
Step 5: Format the SD card if you haven't already done so using the instructions above
Step 6: Copy the img file to the SD card, see step 6a
Step 6a: Make sure that the img file is the ONLY file on the SD card after formatting
Step 7: Take SD Card out of SD Card reader and put it in the a6x6
Step 8: Make sure that the a6x6 is plugged in via ac adapter before doing the next few steps
Step 9: activate SD Loader using the following instructions {
Step 9a: Hold down the power button and enter button (that's the button in the center of the d-pad)
Step 9b: Double tap the soft reset button while holding the other 2 buttons
Step 9c: After double tapping the soft reset button, keep the other 2 buttons held until a blue screen comes up that says something like Asus Cannes flashing utility
Step 9d: Wait until the process is finished (it's near the end when it says "writing private")
}
Step 10: At this point, your a6x6 should reboot on its own
Step 11: enjoy your updated rom
If you have any questions, feel free to just post or PM me.
As I release new roms, if you have a support question, please give me the rom version so I know what rom you are working with. You can get the rom version from the filename of the rom pack.
Example: Asus_A626_WM614_1
A626 = device (most often it will be A626, will rarely be different), WM614 = os version, 1 = release #
Update: Ok, I put out a bug fix rom with a fix for the today screen. I am still trying to find a fix for the sound and notifications control panel applet. The old rom (version 1) is deprecated and is not available for download any more. Use version 1a instead.
ASUS A696 User
Hi, Thanks for the release and good work. Since this is only the beginning (I hope), I begin to inform the performance firmware on my PDA (ASUS A696).
1 - Bluetooth - does not work (does not receive or send files)
- In the settings instead of the icon is a black square.
2 - Today - of all the elements shown only date and time, and only in the old form (as in the previous OS). I wish that Today was like other communicators.
3 - Start - which happened to all the sounds from the "Sounds and Notifications"?
4 - Software & others - as the 696 series have more memory, you can not throw out the program and plug-ins.
Waiting for a new version
Sorry for my English? i'm from Ukraine).
Skromnjaga said:
Hi, Thanks for the release and good work. Since this is only the beginning (I hope), I begin to inform the performance firmware on my PDA (ASUS A696).
1 - Bluetooth - does not work (does not receive or send files)
- In the settings instead of the icon is a black square.
2 - Today - of all the elements shown only date and time, and only in the old form (as in the previous OS). I wish that Today was like other communicators.
3 - Start - which happened to all the sounds from the "Sounds and Notifications"?
4 - Software & others - as the 696 series have more memory, you can not throw out the program and plug-ins.
Waiting for a new version
Sorry for my English? i'm from Ukraine).
Click to expand...
Click to collapse
A few comments on your post:
1. I will check on the bluetooth situation. When I tested bluetooth, I didn't quite test file exchange enough.
2. I am working on a remedy/fix for the today screeen. However, I have no idea how long it will take for me to get it working.
3. This is just a matter of updating a few files. I used an older (and verifiably working) package to give non-phone support.
4. I am aware that the A696 and the later version of the A626 carry more flash rom space than the older version of the A626 and the A686. However, no matter what device I make roms for, there is a finite amount of space to fit everything into. As operating systems and programs progress, they get bigger and bigger. If everything keeps growing in file size, there is less space to fit more items, so I must remove some files/programs to keep within that finite limit of storage space. Where do all the files that I put into the rom go? Well, if you take a look at your storage memory, you will see that the total storage memory available is less than the standard 256 rom size.
I've downloaded and successfully flashed. Working good so far. I'm just installing some programs that I normally use and haven't run into an issue yet. It will be nice to have a working home screen but for now it isn't that big of a deal. I don't use bluetooth often so I can't comment on that yet. Wifi working, my music plays with S2P, I used windows market place to install netflix and office.
Keep up the good work!
Good job, but there are many failures to complete.
1) Today
2) Pictograms from former versions
3) "Sounds and Notifications"
4) Black pictogram Bluetooth in menu
5) When I close program - PDA show me Today(but must show menu)
6) Where is Oficce?
7) The pictograms not move in Start menu(only "Move to top")
Can you change your previous OS(WM6.1 rom version 2) context menu, pop-up menu and other for new from this OS?
P.S.: Sorry if you don't understand me I used translator...
Do you have french rom...?
Thank you.
just tested this build together with your WM6.1 release.
first impression - looks nice
even though seems slower on A696 - but this could be just because it's not tailored fully.
1) didn't test bluetooth much but seems to work fine with sending/recieving. I'd even say it's faster than on WM6.1 v2 release;
2) "Sounds and Notifications" problem with Events from previous v2 WM6.1 build;
3) under "System - Bluetooth" sometimes on BT icon there's black square - didn't notice when it happens though;
4) closing program throws you into Today screen insted of previous step;
5) same problem with Task Manager as I've said in previous thread for WM6.1
good luck
Hello, Steven!
I'm very thankfull to you for WM 6.5.
I have trouble, while installing, to say correctly, on the beginning of installing on my a626. I did everything as in instructions, even for few times. When i press power and enter button, make double tip on the soft reset, I see blue screen, where said sth about Cannes and its version.
it write my FAT type(FAT16), i see very little blink of "Reading file", if not take off fingers from power and enter button, it resets to blue screen again, if take fingers off the buttons, PDA loads...I just don't know what to do.. please, help me!
ps: sorry for my english.
I think I've found an issue. This morning when I turned on the device I had a missed appointment, the notification dialog at the bottom of the screen showed up but it was blank and had the wrong time on it. Not sure if this is a 6.5 issue or an Outlook 2010 issue.
bmasephol said:
I think I've found an issue. This morning when I turned on the device I had a missed appointment, the notification dialog at the bottom of the screen showed up but it was blank and had the wrong time on it. Not sure if this is a 6.5 issue or an Outlook 2010 issue.
Click to expand...
Click to collapse
Oh dear..I will be sure to check on that. As far as Outlook, do you mean Outlook on desktop Windows or Pocket Outlook on Windows Mobile? The only thing is that office (outlook) 2010 is still in beta and hasn't been released officially to the general public yet, so I can't find any definite fixes. I still believe you, but the fact remains that Outlook 2010 is still in beta and the code for the finished product could always change.
Steven, why have you ignored my message?
Hello, Steven!
I'm very thankfull to you for WM 6.5.
I have trouble, while installing, to say correctly, on the beginning of installing on my a626. I did everything as in instructions, even for few times. When i press power and enter button, make double tip on the soft reset, I see blue screen, where said sth about Cannes and its version.
it write my FAT type(FAT16), i see very little blink of "Reading file", if not take off fingers from power and enter button, it resets to blue screen again, if take fingers off the buttons, PDA loads...I just don't know what to do.. please, help me!
ps: sorry for my english.
Click to expand...
Click to collapse
I had the same issue. With a slightly modified .img ("replace:0xC 09 04 => 36 D6" by _barmaley; because I'm a new user I couldn't link the original post...) the update completed successfully.
PS: Steven thank you for the ROM!
Steven855 said:
Oh dear..I will be sure to check on that. As far as Outlook, do you mean Outlook on desktop Windows or Pocket Outlook on Windows Mobile? The only thing is that office (outlook) 2010 is still in beta and hasn't been released officially to the general public yet, so I can't find any definite fixes. I still believe you, but the fact remains that Outlook 2010 is still in beta and the code for the finished product could always change.
Click to expand...
Click to collapse
I am using Pocket Outlook, the new 2010 beta. But it doesn't seem to be related to that, if I make a Notification Dialog popup from something like turning off the A626 it gives me a blank white box. Now I've soft reset the device and it seems to have gone away. I'll keep trying to figure out how to recreate it.
First of all, thank you Steven855 for your job
Skromnjaga said:
1 - Bluetooth - does not work (does not receive or send files)
Click to expand...
Click to collapse
i have no problems with a bluetooth (i can send and get files from my nokia e60)
Skromnjaga said:
2 - Today - of all the elements shown only date and time, and only in the old form (as in the previous OS). I wish that Today was like other communicators.
Click to expand...
Click to collapse
Try to change values in System Registry:
HKLM\SOFTWARE\MICROSOFT\TODAY\ITEMS\Windows Live\Enabled (from 1 to 0)
HKLM\SOFTWARE\MICROSOFT\TODAY\ITEMS\Windows Live Search\Enabled (from 1 to 0)
make a soft reset, check(ON) your plugin in today's settings, make a soft reset
now i have a problem with a today's size (you can see a scrollbar at the right side of the today's area) but its a better as nothing
_barmaley said:
First of all, thank you Steven855 for your job
i have no problems with a bluetooth (i can send and get files from my nokia e60)
Try to change values in System Registry:
HKLM\SOFTWARE\MICROSOFT\TODAY\ITEMS\Windows Live\Enabled (from 1 to 0)
HKLM\SOFTWARE\MICROSOFT\TODAY\ITEMS\Windows Live Search\Enabled (from 1 to 0)
make a soft reset, check(ON) your plugin in today's settings, make a soft reset
now i have a problem with a today's size (you can see a scrollbar at the right side of the today's area) but its a better as nothing
Click to expand...
Click to collapse
Are you telling me this is how to fix the today screen issue? If it is (I still have to test it), I commend you for finding a fix that actually works.
Steven855 said:
Are you telling me this is how to fix the today screen issue? If it is (I still have to test it), I commend you for finding a fix that actually works.
Click to expand...
Click to collapse
yes, this is a tricks to fix the today screen...
i've tested it on my ASUS mypal a696 (but due to the fact that wm6.5 is not stable, I was forced to return to the WM6)
Is this all? Is there a step you're not telling me (I can't seem to replicate it)? What registry editor did you use? Did you use the (soft) reset button or did you use a program to soft reset the device?
Steven855 said:
Is this all? Is there a step you're not telling me (I can't seem to replicate it)? What registry editor did you use? Did you use the (soft) reset button or did you use a program to soft reset the device?
Click to expand...
Click to collapse
I edited the registry, because I was not able to check (ON/OFF) plugins in today's settings
i use resco explorer & reset button.
!!!!!!!!!Try to set ENABLE to 1 for your Plugin (HKLM\SOFTWARE\MICROSOFT\TODAY\ITEMS\"YOUR TODAY'S PLUGIN"\Enabled (from 0 to 1)!!!!!!!!!!!
what program can record video from screen PDA, I could write all steps
ASUS 696 owners please check and confirm the efficiency of the method.
what's the soft reset button on the asus a626? Not quite sure, the device reboots into OS D:
EDIT:NVM I got it, for ASUS A626 DEVICES, POWER OFF YOUR PHONE BUT DO NOT PRESS THE REBOOT KEYS. ONLY PRESS THE MIDDLE D-PAD BUTTON AND YOUR POWER BUTTON
I have this P800 dual sim that runs on Android 2.2 (which in fact I think it is 2.1) and a Chinese Ingenic JZ4760 CPU (600 mhz), 256 RAM, 256 ROM. It has capacitive screen, GPS and Wi-fi. I'm desperate to install Android 2.2.1 on it for some tweaks and I don't know how because I'm new at this. I contacted the supplier but he couldn't help me with this.
Main problems:
1. Where can I find a working ROM for this so I`ll still have the dual sim option? Can't I just install a ROM from any other chinese dual sim or it has something to do with the drivers, CPU on the phone? I saw the hero H6 modding thread here on xda..
2. How do I make a full back up of the phone so I can go back to the original settings if something goes wrong?
3. How do I install new ROM without bricking it?
4. Is it absolutely necessary to root before I install the new Android?
If you want more information about kernel, hardware or anything else I can tell you from "Android system info" application that I installed on it. I might be a noob but I can learn really fast.
Please help! I just need you people to point me into the right direction.
To see the phone just search "P800 Android" on google
Hi, i have a firmware with loader, may be it will help you, https:// rapidshare .com /files/532906208/Z800_2.2GG_FLV01.01B16.rar - pls, delete 3 spaces from link
and i have link to "rooted" (https:// rapidshare .com /files/4267703916/system.rar - pls, delete 3 spaces from link) firmware to use it you must replace system.img from this archive to "img" folder of firmware uploader.
Ubiquitous_Nothing said:
Hi, i have a firmware with loader, may be it will help you,
and i have link to "rooted" firmware to use it you must replace system.img from this archive to "img" folder of firmware uploader.
Click to expand...
Click to collapse
this files was taken from russian forum (forum .china-iphone .ru / viewtopic .php?f=22&t=11424)
Thank you for this. I will try it. I just have some questions: who made this firmware? and why don`t they talk in english so everybody can understand? I need to know if anyone used this firmware and if there will be updated firmwares in the future.
This firmware is made by manufacturer of p800, "rooted" system.img repacked by enthusiast from Israel. I'm and other users from topic about p800 of forum china-iphone.ru use this firmware. Reseller in China promise to send newer firmware on this week. As soon as it happen, link will be available at that topic.
On that forum everybody talk in Russian and foreign-speaking peoples uses Google-translate service to understand us.
For me, for example, English is not comfortable. (I think you can see it in my posts because my grammar).
When the new firmware is available can you please post a link in this topic too?
And since you use this firmware can you tell me if some of the problems I have, are solved? For example:
-Android market working?
-proximity senzor
-microphone
-did you get rid of all those useless chinese applications?
-is it Android version 2.2 or 2.2.1?
-wireless working?
-bluetooth working (sending/receiving)
-both cameras working?
-GPS navigation with iGO working?
-if you reset the phone at factory settings do you lose the IMEIs?
what did you do to install this firmware?
Is adobe Flash and adobe reader working? what about yahoo messenger?
Claudyu said:
-Android market working?
-proximity senzor
-microphone
-did you get rid of all those useless chinese applications?
-is it Android version 2.2 or 2.2.1?
-wireless working?
-bluetooth working (sending/receiving)
-both cameras working?
-GPS navigation with iGO working?
-if you reset the phone at factory settings do you lose the IMEIs?
what did you do to install this firmware?
Click to expand...
Click to collapse
Ok, I'll post link to new firmware, when it will exist.
Mic on my phone working excellent, Android 2.2, proximity sensor worked on Z800_2.2GG_FLV01.01B11, but on Z800_2.2GG_FLV01.01B16 it is not working, both cameras taking photos, but not video. GPS works with (download .osmand .net /latest-night-build/OsmAnd-stable.apk). Wifi is ok. I didn't here about loosing IMEI by this device. I didn't use Andr. market. Now when you have root access you may uninstall everything yourself.
would you please see if the bluetooth, android market, flash player and yahoo messenger is working? Do I need offline maps for OsmAnd to work?
Just now I send a *.docx file to Nokia phone by bluetooth without any problem. OsmAnd as i know will ask you to download offline maps at first run (You need just select Country/region you want to download) BUT i don't know is it free or not. My phone have no internet connection now, thats why i can't help you with flash and yahoo
Hi,
I've questions about this phone. I've see this chinese model with new processor and dual sim support. On the paper it seems a very nice product:
http://www.shanzai.com/index.php/ma...00-phone-running-on-a-chinese-made-jz4760-cpu
but the problem is when i want to find to buy this product
1. is only in english or chinese (french is my mother tongue)
2. i had 3 p/n z800 or p800 or pz800 (in russia)
3. in some site it claims it's a MTK6515 cpu inside and is only a fake on the system properties for the p800
4. in all site it claims 256 ram and 512 rom, but in this topic you say 256/256
for exemple here for P800:
http://www.fastcardtech.com/goods-5...droid+22+os+GPS+Dual+sim+card+phone+wifi.html
and here for z800:
http://www.lightake.com/detail.do/s...iFi_JAVA_GPS_Qaud_Band_GSM_Smart_Phone_-37579
Where is the truth?
Finally if it's really the new Ingenic CPU, it's really better than a MTK6516?
Thanks for you advice
cthulhu501 said:
Hi,
I've questions about this phone. I've see this chinese model with new processor and dual sim support. On the paper it seems a very nice product:
but the problem is when i want to find to buy this product
1. is only in english or chinese (french is my mother tongue)
2. i had 3 p/n z800 or p800 or pz800 (in russia)
3. in some site it claims it's a MTK6515 cpu inside and is only a fake on the system properties for the p800
4. in all site it claims 256 ram and 512 rom, but in this topic you say 256/256
Where is the truth?
Finally if it's really the new Ingenic CPU, it's really better than a MTK6516?
Thanks for you advice
Click to expand...
Click to collapse
Hello.
1. Android on this phone (like on other) is multilingual (French exist exactly)
2. As i know p800 = z800 = pz800.
3. If it will be useful to you I can say that i owned Toshiba portege g810 for 1.5 years, p800 is really better. It is not so fast as HTC HD2, but not so slow as Toshiba Portege g810.
4. I don't know about it's ROM and RAM, beside it is enough for me.
Now some useful application are not installable on p800, but i believe that new firmware will made progress in this.
Some users said, that old versions of firmware had problems with low sensitive mic, now it is ok.
Till now the preamp level of speaker are too high, that is why not comfortable to use it on max volume.
And the 3rd difficulty us in setting up navigation software, people says, that it is impossible to install iGo or navitel (OsmAnd is workable).
The next problem is inability of setting max ringer alert volume, when speaking volume is not on the max level.
The quality of materials and manufacturing are high.
Oh, i forgot to say about excellent touch and bright (suppose AMOLED) screen.
The CPU model is jz4760
P. S. In store where i bought it the details are mistaken too ( www .aliexpress .com /fm-store/403972/210660520-441180847/Hot-Selling-2011-Android-2-2-Phones-P800-phones-with-gps-wifi-java-dual-sim-dual.html)
Ubiquitous_Nothing said:
Hi, i have a firmware with loader, may be it will help you, https:// rapidshare .com /files/532906208/Z800_2.2GG_FLV01.01B16.rar - pls, delete 3 spaces from link
and i have link to "rooted" (https:// rapidshare .com /files/4267703916/system.rar - pls, delete 3 spaces from link) firmware to use it you must replace system.img from this archive to "img" folder of firmware uploader.
Click to expand...
Click to collapse
Please tell me step by step how did you root and install this firmware. If you could answer today it would be great. I tried to root with SuperOne Click to make a full backup in case something goes wrong but it didn`t work and I opened USBbootTool.exe but it`s in chinese and I don`t know what to do. A video tutorial would be really nice..
Step 1. Installing the driver loader.
0. Unpack the archive with the firmware.
1. Turn off the phone, remove battery.
2. Hold down the "volume up" button and connect to the cable.
3. Remove your finger from button. =)
4. PC will find new device and ask the driver (is sited in the "uboot_driver" folder).
5. after installing the driver to turn off the phone from cable.
Step2. prepearing Root
1. Replace file "system.img" in "img" folder with "system.img" from dedicated archive.
Step 3. Flashing:
1. Run USBBootTool.
2. Turn off the phone, detach battery.
3. Hold down the "volume up" button on the phone and connect USB-cable.
3 1/2. remove your finger from button.
4. The process will start automatically.
5. After flashing you'll see Chinese dialog window - it ask you to enter the serial number of 14 digits that has no matter.
6. After that, just insert the batteries, and power on your phone.
Warnings
1. This oeration will DELETE all your custom files, thats why backup phonebook to SD-card or to PC
2. Connect USB-cable to backplate of your PC and use original cable or better if possible.
3. Win 7 x64 didn't install that driver. You must use x86 (32bit) windows versions.
Ubiquitous_Nothing said:
Step 1. Installing the driver loader.
0. Unpack the archive with the firmware.
1. Turn off the phone, remove battery.
2. Hold down the "volume up" button and connect to the cable.
3. Remove your finger from button. =)
4. PC will find new device and ask the driver (is sited in the "uboot_driver" folder).
5. after installing the driver to turn off the phone from cable.
Step2. prepearing Root
1. Replace file "system.img" in "img" folder with "system.img" from dedicated archive.
Step 3. Flashing:
1. Run USBBootTool.
2. Turn off the phone, detach battery.
3. Hold down the "volume up" button on the phone and connect USB-cable.
3 1/2. remove your finger from button.
4. The process will start automatically.
5. After flashing you'll see Chinese dialog window - it ask you to enter the serial number of 14 digits that has no matter.
6. After that, just insert the batteries, and power on your phone.
Warnings
1. This oeration will DELETE all your custom files, thats why backup phonebook to SD-card or to PC
2. Connect USB-cable to backplate of your PC and use original cable or better if possible.
3. Win 7 x64 didn't install that driver. You must use x86 (32bit) windows versions.
Click to expand...
Click to collapse
Thank you for the reply. Where can I get that serial number? And what do you mean it doesn't matter? What settings did you had in USBbootTool? Mine is in chinese.
Claudyu said:
Thank you for the reply. Where can I get that serial number? And what do you mean it doesn't matter? What settings did you had in USBbootTool? Mine is in chinese.
Click to expand...
Click to collapse
Hi!
I didn't fill serial number at all, somebody fill this with random digits.
USBbootTool is in Chinese, all settings are correct, you do not need to change anything there. Just follow the instruction.
Good luck!
Thank you very much. It works.
1. After you unpack the archive the Z800_2.2GG_FLV01.01B16_生产版本 folder must be renamed to Z800_2.2GG_FLV01.01B16
2. The steps were correct but I don`t know how to verify that it`s rooted
3. Like you said it didn`t work on my Win 7 x64 so I went to my neighbor who had Win XP
4. I put 11111111111111 when it asked for serial number and it worked so it doesn`t matter indeed
5. Proximity senzor not working at all
6. Android keyboard missing (Sogou Input instead)
7. The name of the operators still doesn`t appear in notifications just like before. There are just some numbers: 22610 for Orange and 22603 for Cosmote
8. USSD code for Cosmote still not working. *123*2# - This is for showing me how many messages I have left on Cosmote.
I will test different applications so I can see what's working and I`m waiting for updated firmwares from you. Thanks again. You`ve been very helpful. There should be more people like you.
Claudyu said:
Thank you very much. It works.
1. After you unpack the archive the Z800_2.2GG_FLV01.01B16_生产版本 folder must be renamed to Z800_2.2GG_FLV01.01B16
2. The steps were correct but I don`t know how to verify that it`s rooted
3. Like you said it didn`t work on my Win 7 x64 so I went to my neighbor who had Win XP
4. I put 11111111111111 when it asked for serial number and it worked so it doesn`t matter indeed
5. Proximity senzor not working at all
6. Android keyboard missing (Sogou Input instead)
7. The name of the operators still doesn`t appear in notifications just like before. There are just some numbers: 22610 for Orange and 22603 for Cosmote
8. USSD code for Cosmote still not working. *123*2# - This is for showing me how many messages I have left on Cosmote.
I will test different applications so I can see what's working and I`m waiting for updated firmwares from you. Thanks again. You`ve been very helpful. There should be more people like you.
Click to expand...
Click to collapse
Thank you for comment.
I'm just translating information from Russian topic. And giving my experience of using this phone.
2. To verify rooting i'd install Root Explorer and now it is possible to set RW parametr on system folders. Some application start workig after changing firmware, before this apps said that root permission missed.
5. Yes, proximity sensor is not used by interface in this firmware.
6. Android keyboard are able to be selected. For example, open messages and choose creating of new SMS then made long press on text field and tap "select input method" appeared, you need to choose "Guboi alphabetic..."
7th & 8th problems are nod fixed yet
Hello everyone, I have the same phone and when I was trying to root it start making problems and then it's not booting anymore, so this firmware is very important to me, I'm in United Arab Emirates and it's almost impossible to download from Rapidshare. So can anyone be kind and upload both of the firmware to any other site midiafire will be great if possible
http://www.mediafire.com/?ptgu7rdps2gjd22
http://www.mediafire.com/?5j53v5x0zg6zc1c
At the end just wait until it doesn`t do anything anymore(just be patient), then unplug the cable, put the battery and power it on(don`t put the battery with the cable pluged, you could distroy the battery). The booting will take a little longer than before.
If you can root it, please tell me how you did it..