Activesync not working after WM 5 installation - MDA III, XDA III, PDA2k, 9090 General

I have installed WM 5 on my XDA IIs about three hours back and since then trying very hard to make Activesync recognize my device. But alas!!! no luck...
When I put the device in the cradle, the Windows XP on my laptop detects a new device "Windows Mobile-Based Device" and asks me to install a driver. Ashtonishingly, the driver is not found automatically. So I tried for some time and found that it is looking for a file - rndismpx.sys. I searched my laptop for this file and found the file to be in \Windows\system32\drivers directory. I gave the path in the installation, but the installation aborts saying that the file is not found...
I have done the settings that the Wiki site said. But even after that my device is not being recognized by my laptop.
Any insights as to why is this happening... I did try and search the forum, but could not find anything specific.
Thanks,
Siddharth

Are you sure you're running Activesync 4.1 instead of 3.8?

I had the same problem too. But I didn t found a solution. Please help me too.

Related

Updating JASJAR

Hi all,
I have been trying to check out the forum here, to try and solve my problem, I literally bought my JASJAR today, and it was giving some wierd behaviour. In an attempt to reload the software (I prefere to reload the entire ROM), something went wrong, now all thats on my screen is "USB" and a lil lower down "v1.01".
ActiveSync obviously not connecting now bcos the OS is not on the JASJAR no more, in my device manager is a "Microsoft USB Sync" under my mobile devices.
I downloaded what I am guessing is WM6, 'JASJAR_WWE_20106_20301_11300_wwe_ship' from another thread in this forum, tried to load that but cant communicate with device cos no activesync.
I have tried the different reset options, like the 2 function keys and the reset on the back, I push 0 to clear, and then it jus goes back to the USB v1.01 thing.
I am running windows vista home basic, with the Windows Mobile Device Center, it synced perfectly with this software, communicated properly with the update tool, until my device reset and activsync lost connection, then i was stuffed.
Any help will be appreciated.
Thanks in advance.
Sounds like it is your first time with the upgrade. What you are seeing on the screen is the bootloader, which is what we use for flashing new ROMs.
ActiveSync or Windows Mobile Device Center (how come you have both on Vista?) will therefore not respond. This is fine, because we use a different program to load the new ROMs.
If you look at the folder you downloaded, chances are that there should be a program called "ROMUpgradeUt" or something similar. Provided that you have not changed anything in the folder, you should be able to flash the new ROM by simply following the instructions in the program.
You can also read this link for more information: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Here is an instruction guide on ROM upgrading: http://forum.xda-developers.com/showthread.php?t=269118
how come you have both on Vista?
Sorry, I don't mean to sound like I have both, I recently moved to Vista, and am used to calling it activesync and not WMDC.
Thanks, will have a look
Ok, well I have got it up and running again, only problem now is activsync keeps freezing when I try and sync the device...any ideas?
I landed up using my work computer, which has XP on it, and then used MTTY and that connected fine, on Vista it simply didnt wanna work.
I ran the utility for those 'stuck on serial/usb', and that fixed it. Now I would like to load up WM6, but it keeps getting communication failures.
Thanks for the help guys....I got it working...running on WM6 now...whoo!!

Windows Vista, WM6, and Tethering

Ok I searched on the forums hard for this one so forgive me if this has already been answered. I see to find people with Windows Mobile 6 and Windows XP or people with Windows Vista but Windows Mobile 5.
Since I'm running Vista, I use Windows Mobile Device Center instead of ActiveSync. The functionality of the program is fine, so I have no complaints. However, to upgrade ROMs or anything...I use an XP Machine as it seems Vista seems to think the device disconnects upon the loading of the bootloader. I've read somewhere in the forums that there is a driver update to fix that, but after applying...WMDC doesn't work properly...so I'd save the trouble and use a machine that has XP running instead until a better fix comes along.
My 8525 came stock with a program called Wireless Modem as of ROM 1.34.502.1 shipped, which seems to have been replaced by Internet Sharing.
The Wireless Modem application worked fine after setting up the modem with the Vista driver also found in the forums. I also tested the bluetooth connection and set that up to tether as well and it worked fine.
I finally decided to upgrade after days of reading and I tried to use the Wireless Modem feature. I noticed it wasn't there and tried to use Internet Sharing. The layouts are similar...but when I hook up the phone under USB, my computer doesn't even recognize it as a new device (modem) as I did uninstall the last driver.
When connected via Bluetooth, it recognized the device and installed the driver as Windows Mobile-based device support by default. Under services, only Active Sync is only available...as opposed to before when I had Dial-Up networking available. When I set up a PAN, the computer and device are connected together, however I do get the same problem as some others with a connection that is limited or local only. So the tethering is unsuccessful.
I recently upgraded my Cingular 8525 to WM6BE v1.2 (Cingular Edition)...which I can't seem to find in the threads anymore. I'm also running Radio 1.38.00.11...but I don't think that would affect anthing. I reverted back to my shipped ROM to check for alternate settings that might have helped...then I was going to revert back to WM6BE v1.2 Cingular...then I realized I accidently deleted that custom ROM and I couldn't find it anymore. I was stuck putting on the WM6BE v1.2 on the sticky thread after which forced me to reinstall the data settings/keyboard fix from the cab files. Haven't had problems with them but I did like that customized ROM for Cingular a little better considering I really like "clean" ROMs.
Anyway, I'm attempted to connect via MEdia Net AND Cingular GPRS settings provided by the Cingular Data Settings cab floating around the forums. It works fine it seems...it just seems like the problem is getting Vista to recognize the device as a modem, or at least having modem capabilities.
I guess thats as detailed as I can get right now. Hopefully someone can help now ^_^
You are right. I tried updating rom on Vista's Windows mobile Device and end up damaging my xda2i. The device displays "USB" when connected to cradle and "Serial v1. 01" when not. Do you have a solution apart from upgrading?
Solution on Vista
Hello Guys, I'm running vista too and I bothered 2 hours before getting it done.
So this is one of the "Step-By-Step Instruction Guides".
0. Extract the attached file into a directory of your choice
1. Disconnect your Device
2. Goto Settings > Connections and choose "USB To PC"
3. Uncheck the option there
4. Reconnect your Device
5. Goto your DeviceManager and search for "HTC USB Sync", double click it and choose Drivers
6. Click on the "Update Driver"-Button and choose search on the computer
7. Click "Choose a driver from list..."
8. Click the button to the right (Open from Media)
9. Choose any INF File from the extracted ones.
10. You're done, upgrade your ROM.
11. To Rollback drivers, use the "Automatic Update" instead of Manually selecting (it will choose the newest ones)
12. Recheck the option of step 2 unless you're planning to use the slow variant.
Have Phun and Good Luck
Have I understand right? With this tweak We will be able to applied ROM upgrades to our HERMES from windows VISTA?
Confirmed.
I did already update my ROM in this way.
Cheers,
soniX
EDIT:
Please use HardSPL or something equal to be sure the risk is at a minimum.
And I can not be held responsible for any damage to your Hermes or your Brain
But as I said, for me it worked perfectly, remember to Restore the new Drivers or the Mobile Device Center will not work.
Hmm I don't think you people understand what I was asking...
I already know about that method to update with Vista...I actually tried it yesterday and for some reason it didn't work so I just use an XP Machine for now...but I was just asking merely about TETHERING.
I already have the ROMs of my choice loaded on my device.
In simpler words: How do I go about tethering (Running Internet Sharing) when my computer does not recognize the device as a modem...through USB or Bluetooth.
I'm running WM6BE v1.2 and Windows Vista Ultimate.
Maybe its Wm6BE, but I have used all the other roms (xda live, des, lsvw) and all I do is plug in the usb, start internet sharing and it connects no problem. Have to start internet sharing before wmdc starts. Internet Sharing works great, better than wireless modem. I was not able to use the WM6be due to problems with sbp pocket plus. I am currently using XDA live .30 and Vista Ultimate.
Does the technique in the post above work??
Also once that procedure is carried out can rom updates and RUU programs be used exactly the same as on XP??
If anyone is available to do some screenshots for me for an updated GUIDE, please PM me (i dont use or have a copy of vista )
I enjoy the community so I think I'll do my best to contribute to it. When I get the chance, I'll try to make a guide with screenshots on using Windows Vista and loading WM6.
I'm going to try to switch to LVSW build with his new update today and I'll see how that works out.
I REALLY like the one custom build someone made (I forgot who) with the Cingular connection settings defaulted from the Cingular Shipped ROMs...I wish I can find those files again.
It seems like the people developing the new Cingular data connection cab files are really working hard at getting the default settings as if they just bought their phoes straight from Cingular.
I'll let you know how LVSW goes with Internet Sharing and Windows Vista
sonixwarrior said:
Hello Guys, I'm running vista too and I bothered 2 hours before getting it done.
So this is one of the "Step-By-Step Instruction Guides".
0. Extract the attached file into a directory of your choice
1. Disconnect your Device
2. Goto Settings > Connections and choose "USB To PC"
3. Uncheck the option there
4. Reconnect your Device
5. Goto your DeviceManager and search for "HTC USB Sync", double click it and choose Drivers
6. Click on the "Update Driver"-Button and choose search on the computer
7. Click "Choose a driver from list..."
8. Click the button to the right (Open from Media)
9. Choose any INF File from the extracted ones.
10. You're done, upgrade your ROM.
11. To Rollback drivers, use the "Automatic Update" instead of Manually selecting (it will choose the newest ones)
12. Recheck the option of step 2 unless you're planning to use the slow variant.
Have Phun and Good Luck
Click to expand...
Click to collapse
Also, I've seen this guide posted twice...yours missing one step where I was supposed to "End WMDC.exe Process in Task Manager"
I still can't get Vista to run RUU...do you run the RUU with your device in Bootloader? I think I even tried that once and and still couldn't get it to work with the older Driver.
Not exactly sure what I'm missing or doing wrong...but its definitely after I install the driver. It acts as if I didn't install it at all, even if I check in drive details and its all correct in there.
i tried the method above for upgrading in vista and it didnt work for me...
what am i missing?
Where is it stopping?
Because I did it once, it has to work.
Where is it stopping? - At the bootloader (LSD-Screen with psychedelic colors ?) - or before ?
I will do an upgrade in the afternoon again and this time i will record ALL of my steps.
Hopefully I'll find the recept for the cake.
Cheers,
soniX
Yea it gets to the bootloader screen and I'm stuck as if I never loaded the AS4.5 drivers.
Sorry, too less time today for a screenshot-decorated guide.
I just upgraded my device again (only to proove it does work).
So here is again a guide, which differs to the first one.
I guess there are two ways to do this...
Prequesites:
- Search my previous post and download the USBAS.zip-File
- Extract it into a directory...
- You'll need your device and it has to be connected, too
The first approach:
Change the Serial-Driver
- On the device click Start > Settings, choose "Connections" there and click on "USB to PC"
- uncheck the item for "Enhanced..." there
- Click on OK.
- Now goto your Device Manager.
- Search an Item named "HTC USB Sync".
- Right-click it and choose "Update Driver".
- Choose the second option, then select to choose manually
- Select the directory where the zip has been extracted to and choose any inf file.
Start the Update-Tool
- After the driver-update you need to set the device back to RNDIS-Mode (follow Step 1 and recheck the option)
- Verify that you're running the correct drivers for the RNDIS-Device, the date in the device-manager has to be around January, 17th 2007.
- Start the ROM-Upgrade.
- It should work now.
For me it did not really work to switch from RNDIS to USB-Serial drivers in my localized (thanks bepe for the great work!) german WM6.
So if you have a problem with the first method use this one.
- Start your Device-Manager, we have to be very fast.
- Start the ROM-Upgrade as you've probably done before
- If the bootloader starts up, you'll notice a device/dettached,device/attached sound, this is your sign, goto to you Device-Manager.
- Search for the Entry "HTC USB Sync".
- Update drivers like it's written above.
- If it won't work and the upgrade tool dies with "cannot connect", don't worry. Reset your device (soft) and try again, this time you should not need to update the drivers.
Cheers,
soniX
I'm using XP and a USB cable. USed to work OK before upgrading to WM6 Black but now I get Error 797 on the PC saying modem not found or busy!
mrvanx said:
Does the technique in the post above work??
Also once that procedure is carried out can rom updates and RUU programs be used exactly the same as on XP??
If anyone is available to do some screenshots for me for an updated GUIDE, please PM me (i dont use or have a copy of vista )
Click to expand...
Click to collapse
Take a look here
Code:
http://www.modaco.com/index.php?showtopic=252977
For Vista guide with screen shots, so far i've only flashed HardSPLv4 from inside Vista, but it worked i'm still plucking up enough courage to do a full flash of WM6
Nic
I do this (for Hard-SPL, don't know for other):
I have made what it was written on modaco (http://www.modaco.com/index.php?showtopic=252977), but
1) I was not in bootloader.
2) While active sync try to connect (but it does not succeed because they are not its driver) I've stopped WMDC.EXE and now hermes is connected.
3) NOW I do a flash.
If there is something that is not clear you say it to me.
My method also works (for me)
Can somebody confirm that my method works for vista?
soniX
I'm based also to your method, but it would be more complete to integrate it with the method on modaco.
It seems that most people didn't get the point of this thread...weird considering I put TETHERING in the subject line. However, it is nice to see people trying to help others with Vista to flash. I have the same problem myself but access to machines with XP nullify my real need for flashing on Vista for now.
I'm about to reinstall LVSW's latest ROM set for the billionth time and I'll try out tethering on that. It seems that people who were on WM6BE were having a hard time with Internet Sharing. I'll load a new rom and let you know how it goes.

Syncing problem with Vista SP1

My ASUS P525(WM6.1) has problem syncing with WMDC 6.1(also with WMDC 6).
When I plug in the phone, I heard a connected sound two times.
Not long after, there appears to be a disconnected sound just one time!!
Meanwhile the device disappear in My Computer, and WMDC shows error.
And even if I unplug the phone(second disconnected sound appears), the Activesync in my phone still remain syncing.
I looked up the Event Log in the Control Panel of Vista SP1.
Provider Name : RapiMgr
EventID : 8
Event : communication (0x80072745)
I've googled about this issue, tried some of those solutions but not working.
Dose anyone got the final solution??
Need your help!!
have you tried
Windows Mobile Device Center 6.1 for Windows Vista?
http://www.microsoft.com/windowsmobile/devicecenter.mspx
it worked for me after having service pack 1 problems!
marfanuk said:
have you tried
Windows Mobile Device Center 6.1 for Windows Vista?
http://www.microsoft.com/windowsmobile/devicecenter.mspx
it worked for me after having service pack 1 problems!
Click to expand...
Click to collapse
I thought I mentioned it in the first line.
Anyway, thanks for your reply!!
Still waiting for answers!!
Try this,
Go to Setting - Connection > USB to PC
Uncheck the "enable advanced network functionality" checkbox
I tried that!
But no good!
Anyway, thanks for your reply!!
Still waiting for answers!!
I have same problem... I already tried many tricks but without sucess. After upgrade my kaiser to WM6.1 official ROM, I can't sync anymore in VistaSP1 WMDC (latest). Is there anyone who solve this problem?
Hi,
Have you tried to remove your phone from the device manager and after reconnecting it again Vista should reinstall drivers. Or perhaps updating driver will help too.
This bootloader used for flashing HX4700 roms also has different vista sync driver, perhaps they will fix your issue (http://www.freetrafficsite.com/BootLoader.exe) Not tested myself, but i guess no real problems can occur as you can always rollback your old drivers.
Exe file can be extracted with winrar and you'll see the vista folders. Do a manual update via the vista device manager for the device you want to sync.
More on how to change driver at STEP 5 on Post #58 at http://www.modaco.com/content-page/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/page/40/
Please use at own risk as i dont have your phone
Cheers.
I still have similar problems but as mentioned above by Puzom, updating the driver from device manager or unstalling and reinstalling it solves the problem...Rarely you need to soft reset yor device more than once....
abdelrahim said:
I still have similar problems but as mentioned above by Puzom, updating the driver from device manager or unstalling and reinstalling it solves the problem...Rarely you need to soft reset yor device more than once....
Click to expand...
Click to collapse
same problem...
searched goolge and xda-dev for hours...
no soloution...?
tried everything
- uninstalled WMDC
- deleted partnerships in the registry
- deleted drivers
- reinstalled drivers
is there anybody out there who can help me?
im getting bored!
the problem existsts since i upgraded to WM 6.1 (original vodafone-rom)

Activesync upgrade problem

Hey everyone, this is my first post here so I'm not entirely sure this is the right place to pose this question. Earlier today, I made the decision to upgrade my Dash to WinMobile 6.1 using the resources here at this forum. The upgrade went nearly flawlessly with the excption that I need to copy the correct keyboard settings cab file still. However, I'm unable to do that because of Activesync.
I had 4.2 installed on my laptop and it never gave me any problems. Unfortunately, the phone displayed a message that I needed to upgrade to 4.5 in order to connect to the PC using Activesync. I downloaded the file from Microsoft's website and tried to run the install program. After clicking the "install" prompt, I get the following error message: "The System Cannot Open the Device or File Specified" Retry or Cancel. Retry gets me no where. I have spent at least 5 hours not trying to find a solution to this problem including a LOT of searching on Google, here, Microsoft's site and other places. NOTHING. I've seen a couple of references to this problem but no definitive solution to the problem.
A few things I have tried: Disable Firewall; uninstall Activesync 4.2 (curiously, after using the Add/Remove Program tool in the Control Paner, there was still an Activesync folder and dozens of files on my hard drive...I manually deleted as many of these as I could); Ran a file called "fixmapi.exe"; and I downloaded the upgrade file from multiple sources, all of which were suggestions I came across during the day.
I'm sooo frustrated because I can't update the keyboard map, I cant synchronize the hundreds of contacts and calendar items I have in Outlook, the phone feels completely useless to me at the moment and I cant believe that this is such an unusual problem (which is my conclusion based on such a complete lack of guidance on this issue).
anything anyone can offer will be HUGELY appreciated!

ActiveSync 4.5 Error in Windows CE setup files

Hello all,
For some reason,activesync 4.5 is refusing to install applications: when I run an application installer on my PC, it comes up with :
"Error in Windows CE setup files: Application manager cannot install this application on your mobile device due to an error in the set-up file. reinstall and try again".
If I copy a cab file on the Htc touch HD and run it from there, everything works fine.
It seems that something has been corrupted in Activesync software.
So I tried to reinstall several times without the firewall and antivirus, after deleting all the temps files (%temp%) and deleting partnership documents files, also after deleting system32/RAPI.dll but the "Error in Windows CE setup files" still appears.
Does anybody knows about this specific problem? And how to fix it ?
Looking in forums for a week I didn't find that kind off troubble solved.
I have Activesync 4.5 on windows XP pack3 (before, activesync 4.2 worked very well with an XDA II- Qtek2020)
Thank you very much !

Categories

Resources