Hi all,
I just fell off my bike, and noticed my screen did get more damage than me :?
Does anyone have an idea where I could get a replacement screen?
Regards,
Kilrah
screen
you can get a sreen here http://www.pdasmart.com/pdaphonexda2s.htm
the cost is $250 delevered anywhere in the world hope this helps i know its not cheap. but this is the only source that i have found.
Re: screen
acezone_dan said:
you can get a sreen here http://www.pdasmart.com/pdaphonexda2s.htm
Click to expand...
Click to collapse
Read that first before dealing with them:
http://forum.xda-developers.com/viewtopic.php?t=31250
Related
Hi all,
I just recently got hold of a XDA Orbit which the previous owner had dropped off a roof (don't ask! ) The screen broke when it hit the floor and it has cracked and just appears white when you turn it on.
I know the system is still running because I can hear the sound effects when turning the volume up/down so I think it's still working ok....
So what I'd like to do is buy a replacement screen off eBay and fit myself. Does anyone know how hard it is to do this? I've got the Artemis-Inside PDF and although it's a great help in seeing how to get inside the thing, it doesn't really show how to replace the screen....
I'm assuming I can just disconnect the ribbon cable and pull the old screen out and then just put the new screen back in??
I hope it's that easy anyway! If anyone knows then it'd be a great help to me,
Thanks for any replies!
Jon.
Sounds difficult according to this thread:
http://forum.xda-developers.com/showthread.php?t=312382&highlight=screen
Hmm that's not quite the same problem as I have.... that poster was just trying to replace the "touch" part of the screen whereas I'm going to try and replace the whole LCD + "touch"
This is what I'm hoping to buy: http://cgi.ebay.co.uk/New-Genuine-O...5QQihZ002QQcategoryZ10364QQrdZ1QQcmdZViewItem
and by the looks of the picture on the auction and the picture in that other post, the screen is the same as the original Orbit screen....
Artemis screen repair
I've change my broken screen with an ebay screen (lcd+touch) in less 1 hour.
No big difficult...
evaluator said:
Sounds difficult according to this thread:
http://forum.xda-developers.com/showthread.php?t=312382&highlight=screen
Click to expand...
Click to collapse
This is for 'touch' part only wich is very difficult, because the lcd and touch are the same part... i've try the same (because of price) with no result because the connector was not the same and i can't detach the lcd part of the 'touch' part, so i manage change the all without difficult.
If you need a guide
http://forum.xda-developers.com/showthread.php?t=298413
SuperMimi said:
I've change my broken screen with an ebay screen (lcd+touch) in less 1 hour.
No big difficult...
Click to expand...
Click to collapse
Hi SuperMimi, thanks for your reply, I'm going to take the plunge and order a new screen!
Thanks again!
(If I remember, I will post back and let you all know how it goes.. )
Yep, got it all swapped out with the new screen but the PDF I'd downloaded didn't help in the slightlest!
Maybe the UK model has been slightly re-designed? I don't know but I did take some shots which I'll put into a PDF at some point. Who knows, it might help someone else out.
jonathan488 said:
Yep, got it all swapped out with the new screen but the PDF I'd downloaded didn't help in the slightlest!
Maybe the UK model has been slightly re-designed? I don't know but I did take some shots which I'll put into a PDF at some point. Who knows, it might help someone else out.
Click to expand...
Click to collapse
Hi Jonathan,
Can you put those shots into a pdf please and also send me instructions. My screen just cracked, I've ordered a replacement and needed instrustions much appreciated.
Disassemble XDA Orbit
I've posted the instructions I followed on another forum.
http://www.modaco.com/Disassemble-XDA-Orbit-t260167.html
Hope it helps, and it was fairly straight forward to replace the screen unit.
Matt
After getting frustrated i made a bad decision and decided to punch my phone.
now i need to fix my phone.
it appears i have broken the digitizer. on tearing the phone down it seems the screen and digitzer are the same unit.
can anybody else confirm or deny this. it is a htc desire hd.
it has definately been fixed at some point in its life because theres alot of dust between the digitizer and screen.
any help will be greatfully recieved
i had another look.... they are seperate.......
You punched your phone? Haha
Sent from my Nexus 7 using xda app-developers app
1am570yl3z said:
After getting frustrated i made a bad decision and decided to punch my phone.
now i need to fix my phone.
it appears i have broken the digitizer. on tearing the phone down it seems the screen and digitzer are the same unit.
can anybody else confirm or deny this. it is a htc desire hd.
it has definately been fixed at some point in its life because theres alot of dust between the digitizer and screen.
any help will be greatfully recieved
i had another look.... they are seperate.......
Click to expand...
Click to collapse
Afaik they are separate. !
sent from my Nokia Lumia 820
1am570yl3z said:
After getting frustrated i made a bad decision and decided to punch my phone.
now i need to fix my phone.
it appears i have broken the digitizer. on tearing the phone down it seems the screen and digitzer are the same unit.
can anybody else confirm or deny this. it is a htc desire hd.
it has definately been fixed at some point in its life because theres alot of dust between the digitizer and screen.
any help will be greatfully recieved
i had another look.... they are seperate.......
Click to expand...
Click to collapse
Hi, i've changed my screen 2 months ago, and i can tell you that is better that you buy the screen with the digitalizer and the frame. All the kit, then search some video on youtube about disassembly and in 1 hour you will have your phone running again, it's easier than seems, you'll sure for that.
https://www.youtube.com/watch?v=aqwlpooq0Iw
dario_pet said:
Hi, i've changed my screen 2 months ago, and i can tell you that is better that you buy the screen with the digitalizer and the frame. All the kit, then search some video on youtube about disassembly and in 1 hour you will have your phone running again, it's easier than seems, you'll sure for that.
https://www.youtube.com/watch?v=aqwlpooq0Iw
Click to expand...
Click to collapse
thanks for the link to the vid much better than the one i found.
i did wonder whenn looking on ebay they have a lot with the screen and housing. unfortunately i have just orderd the digitizer only. will give it a go for now if not will defo take ur advice.
top notch
cheers
dario_pet said:
Hi, i've changed my screen 2 months ago, and i can tell you that is better that you buy the screen with the digitalizer and the frame. All the kit, then search some video on youtube about disassembly and in 1 hour you will have your phone running again, it's easier than seems, you'll sure for that.
Click to expand...
Click to collapse
Nice video! now I know how to repair my phone too. Thanks!
1am570yl3z said:
thanks for the link to the vid much better than the one i found.
i did wonder whenn looking on ebay they have a lot with the screen and housing. unfortunately i have just orderd the digitizer only. will give it a go for now if not will defo take ur advice.
top notch
cheers
Click to expand...
Click to collapse
You can try to change just the digitalizer, but is riskie, so i you broke the screen, then you can order the entire kit, so, don't worry!
1am570yl3z said:
After getting frustrated i made a bad decision and decided to punch my phone.
now i need to fix my phone.
it appears i have broken the digitizer. on tearing the phone down it seems the screen and digitzer are the same unit.
can anybody else confirm or deny this. it is a htc desire hd.
it has definately been fixed at some point in its life because theres alot of dust between the digitizer and screen.
any help will be greatfully recieved
i had another look.... they are seperate.......
Click to expand...
Click to collapse
If you decide not to fix your phone ill buy it from you if ur micro usb on mainboard works
xperiax8tester said:
If you decide not to fix your phone ill buy it from you if ur micro usb on mainboard works
Click to expand...
Click to collapse
Yep ok so yes the best way is to replace both digitizer and lcd at the same time, after applying a small amount of pressure to stick the 2 together i put a small crack into the lcd (ggggrrrrrr) ( literally the smallest amount of pressure) so that was really good advice there.
I will be purchasing a new lcd as i do enjoy this phone..
many thanks for the offer of buying it. yes the micro usb works fine, if it appears that i am unable to fix it i will be more than happy to sell it......
Bottom Line Replace both Digitizer and lcd and even housing if poss at the same time....
thanks for your advice and suggestions.
Hi guys, not sure if this is the right place for it but I can't for the life of me find anywhere selling the glass screen and digitizer for the 2014 note yet... anyone located one? Reason I ask is my mate has sat on his and it's well and truly cracked but luckily the LCD behind it is fine.
Any help is appreciated!
Cheers,
Scott
http://arabic.alibaba.com/product-g...-lcd-touch-screen-replacement-1517317298.html
Thats the only thing I can find but since I'm on my phone it doesnt seem to want to translate so can't tell if its deffo a digitizer for our tablets or even if the do delivery worldwide.
Hello Guys.
I dropped my phone today and when I lifted it up my screen was blue/black. I pulled the battery out and turned it on. Most of the screen is black and can't see anything. There are strips of blue pixels here and there.
What exactly is broken and what do i need to replace. I obviously need to replace the Glass frame/screen, LCD ... do I need to replace the digitizer as well?
If anyone knows about this please help me out.
nikDR said:
Hello Guys.
I dropped my phone today and when I lifted it up my screen was blue/black. I pulled the battery out and turned it on. Most of the screen is black and can't see anything. There are strips of blue pixels here and there.
What exactly is broken and what do i need to replace. I obviously need to replace the Glass frame/screen, LCD ... do I need to replace the digitizer as well?
If anyone knows about this please help me out.
Click to expand...
Click to collapse
Is better change the complete set to avoid dust under the digitizer.
jmberumenb said:
Is better change the complete set to avoid dust under the digitizer.
Click to expand...
Click to collapse
Hi there. Thanks for the quick reply..
would this be good?
http://www.ebay.com/itm/400684261111?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
nikDR said:
Hi there. Thanks for the quick reply..
would this be good?
http://www.ebay.com/itm/400684261111?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
As long as I know any T999 i535 I747 will be compatible except I9300. I dont know why but some T999 users havd problems.
Is a good deal indeed. But If you can find some with frame includes will ve a very sweet deal.
http://www.ebay.com/itm/US-Samsung-...e_Replacement_Parts_Tools&hash=item51ae2b66ce
I know sound expensive but you only will have to change the mainboard and components very easy without any need of stick or glue to install it on the frame.
jmberumenb said:
As long as I know any T999 i535 I747 will be compatible except I9300
Click to expand...
Click to collapse
Yeah I heard it should work and is cross compatible. But my question is if on that eBay link.. Are they selling everything I need to fix my problem or do I need to buy something else? I
It says: 1. Front Glass Touch Screen Digitizer Panel + LCD Display Screen pre-assembled without frame
That's all I need ?
Thanks
nikDR said:
Yeah I heard it should work and is cross compatible. But my question is if on that eBay link.. Are they selling everything I need to fix my problem or do I need to buy something else? I
It says: 1. Front Glass Touch Screen Digitizer Panel + LCD Display Screen pre-assembled without frame
That's all I need ?
Thanks
Click to expand...
Click to collapse
Yes, the only concern I have is the glue used to join the frame with the screen, if isn't professional installed this will be falling soon or getting dust an sand under the screen. Thats why I recommend the entire frame and screen set...
jmberumenb said:
Yes, the only concern I have is the glue used to join the frame with the screen, if isn't professional installed this will be falling soon or getting dust an sand under the screen. Thats why I recommend the entire frame and screen set...
Click to expand...
Click to collapse
Unfortunately I don't have that money right now so I will settle with the cheaper method. I will try and see how it goes.
Thank you for your help.
Hi all. I've had un unfortunate phone drop last night, resulting in the glass of the screen broken in the lower left corner. The screen is displaying perfect and so the digitizer. I've seen some sellers on amazon selling the glass only with no digitizer nor display. Can anyone let me know if this can be changed (glass of the screen only), and if so, any tutorials or videos to do so?
I really dont want to spend more than $100 on a new screen...
I hope someone helps! Thanks!!! Cheers.
FedericoUY said:
Hi all. I've had un unfortunate phone drop last night, resulting in the glass of the screen broken in the lower left corner. The screen is displaying perfect and so the digitizer. I've seen some sellers on amazon selling the glass only with no digitizer nor display. Can anyone let me know if this can be changed (glass of the screen only), and if so, any tutorials or videos to do so?
I really dont want to spend more than $100 on a new screen...
I hope someone helps! Thanks!!! Cheers.
Click to expand...
Click to collapse
I dropped my Pixel 2 XL in November, also only the glass was broken.
But I paid €180 for the glass plus screen, because the screen is razor-thin and glued to the glass. As far as I know, the glass isn't sold separately, at least not as original from Google.
And believe me, the glass is very thin, but the screen is even thinner. So before buying a third-party-glass, I would check how to get the screen off the glass and back again.
I've been looking for some videos about this, and it looks really complicated to separate the glass from the screen, but possible. Some guys apply extreme cold or heat to unglue the screen, then they clean up ALL the screen, and then they reapply something to stick it to the new glass (I don't know what they use). So balancing the hard work to do this, I'm starting to think it will be a better option to change the whole screen. Do anyone knows if new purchased genuine screens comes with the blue problem solved? Any good place to purchase a genuine one within USA?
Thanks for the answers and help...
FedericoUY said:
Do anyone knows if new purchased genuine screens comes with the blue problem solved? Any good place to purchase a genuine one within USA?
Click to expand...
Click to collapse
Anyone?
Please any suggestions on where to buy a good screen for this phone?
FedericoUY said:
Please any suggestions on where to buy a good screen for this phone?
Click to expand...
Click to collapse
https://www.ifixit.com/Store/Android/Google-Pixel-2-XL-Screen-and-Digitizer/IF356-025?o=1
https://www.repairpartsplus.com/Goo...-QU6eVr7pcz-dSfc7zGXfxrjMZ_L0QHQaAsMHEALw_wcB
HueyT said:
https://www.ifixit.com/Store/Android/Google-Pixel-2-XL-Screen-and-Digitizer/IF356-025?o=1
https://www.repairpartsplus.com/Goo...-QU6eVr7pcz-dSfc7zGXfxrjMZ_L0QHQaAsMHEALw_wcB
Click to expand...
Click to collapse
Thank you no stock on the first one, but looks like the second has to sell...