Related
I have been sent a link from O2 Data Support for downloading the new XDA2s ROM upgrade, which apparently will fix the Bluetooth problems.
The link is...
http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIs_launchROM.htm
Haven't done anything with it yet, but thought you guys might like to know...
regards,
Guy
Hmm I wonder if I can use this update on my O2 Xda2s.
I got it in Malasyia.
Noel
I installed it on my UK XDA 2s, I will report back later.
In the PDF it's saying that this version is only for devices sold by O² UK or O² Ireland... Not sure if I should give it a go on my version..
Noel
I think I might wait and see what others say about this before I install it myself. So many that have it already say it is great but then you hear others say it has caused problems.
That post is the launch rom, not an upgrade. LMAO It is intended for people who attempt to flash the XDA IIs with a different vendors rom and screw it up.
Mike
Nope, its not, click the link. O2 are obviously just too lazy to create a new page for a new rom!
Nigel
HAHA you are correct!!! LMAO oh well. :shock: :lol:
Hi..have installed the update..and have encountered several problems...was wondering if anyone could help me.
I hate the fact that the clock has disappeared from the top right so whe u are using applications its no longer visible. Is there any way of bring it back?
Also now when you click the o2 at the top it dosn't give the active connections anymore. Therefore whats the quickest way to disconnect the gprs? and is there any way of bringing that back to how it used to be?
I have also had to reset my phone more often that I had to before.
Was wondering if anyone had encountered the same problems and how to resolve them.
Thanks so much...
Bit the bullet and upgraded last night, wifi still works and as I use Corporate mode I don't get any issues with 02 active, icons or clocks. All seems normal, so far!
Have to agree with Dave. I finally bit the bullet and installed the update last night. Don't like the new O2 active and put the clock straight back with the registry key.
Other than the missing clock and poor O2 Active software which I never use anyway no real problems. Tom Tom still works fine with my Bluetooth GPS receiver. WIFI still works fine with WPA security and everything locked down on the access point.
Still receive SMS notification and its nice that you're not limited to 70 char when using ' in sms text messages now!
All ok.
har5ha:
Just get the old O2 active back. To to this, head to the xda-dev FTP site, find the old O2 XDA IIs extended rom, pull it, find the file install.ARM.CAB (O2 active)
Sync/backup yr stuff then hard reset the XDA IIs, and let it do its stuff. When leave it to install the extended rom, but be ready to soft reset it when you get asked the 'corporate/personal' question (you'll have to watch the screen since there is a timeout). Once it reboots, copy install.ARM.CAB to the machine, and execute it. It will soft reset yr device at the end.
I use 2 things from O2 active, the battery plugin and the O2 icon to kill connections. Shame billy did not think to include a disconnect dialogue as well really (he put on in for vpn).
There might be a way to install old over new, dunno. I tried and it locks loads of files (even if you prevent it from loading).
Nigel
thanks Nigel...I ended up installing gb soft for the disconnect button.
So its ok...still getting loads of crashing. I think am going to reinstall it and then use corporate mode..hopefully it will crash less!
can I get an update on xda iis rom update
Hi all, I'm still new to this whole thing but reading and researching all I can. Don't have an xda iis as of yet, but on the high streets waiting list. I like the phone and in one way, can't wait, but don't want problems when I get it, especially at the price. Can anyone on o2 that has purchased their phone from o2 let me know how you are getting on...problems...ect, before and after the update.? To be honest, I'm a bit afraid to bite the bullet and get one right now due to what I'm hearing...especially since I'm not very computer smart. I do understand that it depends a lot on the manufacturer of the phone but if I had problems like I'm hearing about it would really do my head in...(no patience). Thanks
Well I love my phone to bits...had issues with the update but now that I have hard reset it and put it corporate mode its not freezing anymore.
But you have to remember its a pocket pc...like a pc..will need to be reset every so often...I was resetting mine of average once a day. It just takes a minute.
There are some negative points..but the positive outweighs the negative I think. My old pda was palm os (clie) and this is windows which is really good! As well as the fact that it has a phone built in too!
Hi all.
Can you please post some more feedback on this rom.
How is the BT stability?
Range?
Crackling noise?
License Expired troubbles?
I know its Build 3500, but maybe something else in this rom makes a difference.
How about the problem with sound dissapering when you answer a call.
Any troubbles here? This is really a pain in the (_!_)
Running the New Rom for a couple of days now and it seems much better than the launch Rom, The O2 active stuff is just as pants as usual so remove that and the "Connections" exe from Windows\startup.
Best thing is that it's stopped the annoying bug of the GPRS settings being screwed up when you enable/disable Wi-Fi.
Recommend it myself
Password
Anybody knows the password for this rom
PDA2K Upgrade
Hi, Can this rom replace the i mate rom on the 2K.& If so will it then be sim locked to O2? as I want to use an O2 pay as you go, & T-mobile sim
many thanks in advance............
When I turn on Bluetooth on XDA IIs, I got this error message :
"The bluetooth radio radio failed to turn on due to insufficient driver memory available. You must perform a normal reset before you can turn on the bluetooth radio."
Anyone can advise how to resolve this ? Soft reset does not cure the problem. Thanks.
have you upgraded to bluetooth stack version 3900 ???
if you have then im fresh outta ideas, if you havent find this at our FTP site,
ftp://xda-developers.com/
login and password = xda
got the same problem when i installed one of the bluetooth upgrades on its own. then i installed the new rom and everything was fine. not sure where the connection is but thought id share my problem
Problem solved.
By the way, what is the latest version of ROM for XDA2s, and where to get it from ?
Thanks.
So I was wrong.
After upgrading the BT upgrade, things was OK yesterday. But this morning i got the same error again.
Went to ftp://xda-developers.com/ as suggested, can anyone mentioned the filename of the ROM mentioned by thakkergaurav above ?
Thanks.
The latest ROM is 1.40
You can find it here: http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Hmmm..... :?
This BT issue is really getting to be NOT FUNNY! :evil:
Running the new ROM 1.40 and BT 3900 I'm now getting the "no sound" problem on the handset and caller cannot hear me on a HS801!
I use the turn on/turn off BT trick or soft re-set and the handset is OK for a couple of hours but the HS801 still does not work even though its OK with my old PocketPC,a nokia and a Motorola V3!
Is there any consistancy with this problem? It seems the different ROMs, Radio Stacks and BT versions are being effected.
Well, emailed the tech support, and all they can say was ...
"There is a ROM upgrade in development which is in the final stages.
We request your patience as we are trying to release the upgrade as soon as possible."
And that was 2 weeks ago.
even my bluetooth is upgraded to 3900,
i get the same error message also..
i cannot believe a 96mb memory is still not enough
i never get this kinda nonsense when i was using the 5450 ipaq
my today plugins was all over the screen and I had never encountered low memory...
I had the same problem but I have a Harrier not a BA so I thought it was related to that and you BA guys wouldn't get it.
Anyway, the solution on the harrier was to
-turn flight mode on
-soft reset
-turn bluetooth on
-turn flight mode off
Hope this helps
Here is a possible solution from wiki:
The ExSenetoR wrote:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Have not tried this myself, but I believe others have had success with it. You may want to save the file somewhere else, in case you want to reinstate it later...
Hope this helps
Chris
I posted this in another thread.
It really does look like a combo of the 1.40 ROM and 1.12 Radio Stack that is causing this problem (in this case, anyway. See sig). After trolling various forums, it seems that both BT build 3900 and 3500 are having the same issues.
IMHO it seems that the Blue Angel is trying to send the call to my HS801 even when BT is not activated.
Has anyone had a good look at the current radio stack? I've tried contacting Broadcom (BT chipset supplier) but it has been 3 weeks with no answer.
I've done the Run_BTTrayCE_10.lnk workaround but this is only a bandaid and I don't really have enough experience to attempt to cook the ROM. Any ideas?
I have a Motorola HS801 as well and I can receive calls just fine but when I make calls the other party can't hear me. I'm giving up on the HS801 - it's a cheapie anyway and I don't know of anyone else who's got it working either. Running BT3900
Hi!
I have a problem with my QTEK9090. From time to time when either myself or caller calls to my PPC we can not hear anything! When I try to call back immediately the same procedure occurs. The only thing that temporarily solves this is then I do a soft reset of PPC. Until next time.
I have upgraded from original version 1.12.00WWE to 1.22.00WWE and to 1.40.00WWE. I got a beta version from technical support for radioversion (1.13.10) but without any success. I also have got a new SIM card.
Any ideas?
i have the same problems, and the same sys op... and i had applied all patch...grrrrrrrr :evil: :evil: :evil:
Is your BT on? If not turn it on and leave it on.
good luck
Hi!
Thanks for your replies. I will leave the BT on today and check any differences. Have you had the same problem yourself?
Hi!
matrix70 which version are you running? Have you tried different versions? Have you tried to contact technical support or Telia for this problem?
i'm italian and i bought ba in greece. I just have upgraded with 1.40wwe version, applied all patch...but the proble still here...grrr..i discover that it's coming when i try to use ba in fastest mode.. switching from an application to another in a very fast mode, or trying to recall quickly a number that it's busy.
matrix70 from version did you upgrade from, do you remember?
same problem here, i did read in another thread that this is a known problem and can only be solved by moving to wm5.
I have radio version 1.06.02 and will move to 1.11.00 to try my luck
now i have update from 1.40 to 1.42 and the problem it's seem disappeared.... but with this version i can't sync my calendar....wath a lolling problem ....
I have run with BT on for some days and the phone problem is not occured once.
Great to here that problem with phone is solved in next version.
I remember there was a thread a few months ago I think. I had the same problem when I got my IIs last July, but I just turned off the BT and up to now theres no prob..... I havnt upgraded my version yet, I still use the 1.31 coz everythings working fine
Search the forums for Unidirectional Audio patch. This will fix the problem. But you probably do need the 1.40 series ROM.
im having the same issues, anyone know how to fix it up???
sometimes cant make or receive calls till i make soft reset.
thanks in advance.
im running rom 1.40.
couldn't find "Unidirectional Audio patch"
anyone have any idea where can i find it? and if its really fixing this annoy problem
thanks in advance.
Hi!
You can find the patch here http://wiki.xda-developers.com/uploads/PDA2k_UniDirectional_Patch.sa.cab). It didn't help me at all. I still have problem when BT has been activated nextcoming calls I still can't here or the caller can here anything. The only thing that have helped me, from a tip in this forum, is to always have BT activated.
Regards,
Fredrik
Thanks for the answering m8.
I actualy have been experimented these issue with bluetooth off...
just tryed with bluetooth actived all time and seems to be working.. anyway don't like this fix at all .. consuming extra batery to make the phone working properly is ridiculous
i will try out the fix anyway.
Thanks.
there was a pollon here about this a few months back and 76% of the users in this forum experienced this problem to some degree. Never found a proper fix.
how come manufacturer companies havent take notice yet? or iven the supplied the proper fix to this? is a very important issue...
other licenses than Qtek 9090 got the same issue??? pda2k? and the other clones???? know about it???
for the moment i have to say by enabling bluetooth all time as working well so far ...
Okay so i ordered and received a Daxian T32 phone. This phone is great in all, no problems except for the wifi not working. It has it built in phone it has been disabled and only a wifi firmware update will enable it and whenever that will be out and i dont want to wait. Is there anyway to enable it? Tronicvasion were i got it from said that there might be a hack for it i guess. I was wondering do anyone have any info on this. Thanks.
thepindoctor said:
Okay so i ordered and received a Daxian T32 phone. This phone is great in all, no problems except for the wifi not working. It has it built in phone it has been disabled and only a wifi firmware update will enable it and whenever that will be out and i dont want to wait. Is there anyway to enable it? Tronicvasion were i got it from said that there might be a hack for it i guess. I was wondering do anyone have any info on this. Thanks.
Click to expand...
Click to collapse
I have heard that there is a hack for it, but haven't been able to find it anywhere. It's probably all over the Chinese forums...in Chinese....
daxian
hi folks!
i got an daxian x999 (which is the same as your t32) and i´m desperatly trying to dump the rom, because i want to modify or even replace it!
if u got to know somethings about hacks or tweaks, please tell me about it!
if someone can tweak it, maybe he even can dump the rom
thanx in advance
chuckbert
p.s.
to have wifi in my phone would be quite cool, too
Hello,
i have the x999+ with working wifi.
If it would be possible to read out my rom. could this be helpfull for you?
michael
rom!
sure it would be helpful... if it would be possible!
i´m trying to do this for a couple of days and i desperately need help from some kind of "rom-god"
so all u "rom-gods" reading this: gimme a hand, please!!!
I do have the 8 Gig mini sd card update for it, but nothing for the wifi yet. I dont even know how to get into the rom to enable it. As for the GPS chip it is over in europe from what i heard.
update
@thepindoctor
what kind of update is it?
just a .cab or something to flash the device?
It is just a cab file for the 8 gig memory card to work and i sure the wifi update will be the same way. I am having so much trouble with this phone rebooting at times and even hard resetting at times, im so glad i kept my wing, gave that to my wife but now im taking it back.
wifi
where did you get the information about the possible wifi-upgrade from?
i´m still very interested in it...
p.s.
i never experienced these kind of problems, though i keep playing around with my daxian to get the bootloader out! kinda strange...
T32 8 gig cab
thepindoctor said:
It is just a cab file for the 8 gig memory card to work and i sure the wifi update will be the same way. I am having so much trouble with this phone rebooting at times and even hard resetting at times, im so glad i kept my wing, gave that to my wife but now im taking it back.
Click to expand...
Click to collapse
Hi,
Were I can find this 8 gig card cab? In my device with wifi has just up to 2 gig.
Thank you in advance!
BR
SDHC update and WIFI
To enable SDHC, you can just look for it on the forum, it is on here several times...
Am not sure, but don't think that there will be an "update" for wifi...
The daxian x999/t32 doesn't have it, the daxian x999+/t32+ (which I have) does however...
So don't think you should get your hopes on for a "wifi update", if you would have a wifi antenna built-in, don't you think they would try to make it work from the beginning?
The + version has also been released a couple of months ago and if there would be such an update, I think they would've released it then.
is the sdhc hack a standard wm6 update for all phones? can't find a specific T32 one on here
I have the Wifi Hack App
Its a little dificult to do this:
1) get the pocket hack master (trial version)
http://store.handmark.com/p/910/Pocket_Hack_Master_for_Windows_Mobile_Pocket_PC
2) Shut off BLUETOOTH on 13%
3) Download http://www.freewarepocketpc.net/get-wmwifirouter-v0-89.html
WIFI router
4) on T32 (only T32) go to Settings - Connections - GPRS Stup, name it WIFI (on gprs internet)
5) save and restart t32. Run the wifi router and it will find your connection
And your using T32 wifi . thanks Rex909 the ghost hack master
i think i explained it right if i left something out let me know
That doesn't really make any sense. I've never been able to get Pocket Hackmaster to work with my T32. And how would one "shut off BLUETOOTH on 13%"??? And what would Hackmaster and the WiFi router have to do with each other?
any answer to the sdhc update whereabouts?
shambolic said:
any answer to the sdhc update whereabouts?
Click to expand...
Click to collapse
the cab that i use is SDHC.777 and is working, do a search with this name
problem with my daxian x999
Hello my friends
I really need your help. My phone starts to fail during booting and also if boot has problem reading some applications.
I made a hard reset as were explained before, blue screen...
So far so good, but still the some problem, I looks like some files are missing, shortcut invalid and my documents some times stay some no.
I am newbie with this but I think there is a problem with the rom.
thanks.
Have you used WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator with the phone before?
Until now i have found 4 cases of that behavior with the T32+ (including mine and yours)
I want to know what caused the malfunction. My phone is on the way back to me from china where it was repaired and i dont want it to break down again - so if you have any suspision please share it with me.
Other Software i used:
S2U2, S2P, S2V, and many more...
Draque:the_Plaque said:
Have you used WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator with the phone before?
Until now i have found 4 cases of that behavior with the T32+ (including mine and yours)
I want to know what caused the malfunction. My phone is on the way back to me from china where it was repaired and i dont want it to break down again - so if you have any suspision please share it with me.
Other Software i used:
S2U2, S2P, S2V, and many more...
Click to expand...
Click to collapse
****, YES !!! S2U2 and S2V,
Tomorrow, I'll send to china. Now the phone doesn't boot. Only shows windows mobile screen (blue). Nothing more
It's good to know which soft we have to avoid.
I didn't use WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator.
Only used S2UD and S2V.
Thanks for your info and share it!
personally i dont really think that s2u2 is responsible but maybe...
On the other Hand i had the following sw installed:
OmapClock - which failed at 204 MHZ
ActiveGCSync - a Google Calender Sync Application
GooSync - also a Google Calender Sync App
opera_wm5_ppc_865 - Browser
osmtracker
PCMKeyboard
Pointui 1.51a
SetVolume
SkypeForPocketPc
many GPS and Geocaching Apps
i also deleted the launcher startup link and the TouchFlo3D App.
btw: did s2u3 always behave right when you rotated the screen?
Good luck for your phone
I downloaded Windows Mobile 6.1 about 2 weeks ago and I have really thought it to be a step up from version 5. However, I am having a problem with the messaging. When I go to my inbox it says it is receiving an MMS and the clock on top is pushed over to the middle. After this it will start scooting the whole screen over to the left. Also, I am unable to run messaging after this because it seems to time out or something. I have uninstalled 6.1 and downloaded it again hoping this will fix the problem but it never does. I was wondering if anybody has had this problem or if anybody knows how to fix it before I return to the T-Mobile recommended WM.
Thanks,
Brad
did you use the built in connection setup program? If not, start there. I have played with a lot of the 6.1's on my Dashes, and the connection wizard has always worked for me
yeah, still no luck.. i'm thinking it has to be a problem with the WM 6.1 itself, although i've tried to find a different version each time i've had to install it again.
6.1
Have you tried Rickwatt's v24, I've been using it for a while , done a lot of modding and I've never had any mayor problems.
I installed v24 to my phone 2 days ago and it is still doing the same thing. I'm not sure what is going on, i was hoping somebody had had this problem before.