I have realized that when one call me after 3 rings it activates the answering machine.
I have called Vodafone and they have told me to make a code to disarm (##002 #) but nothing.
I have recalled and they have told me "we disarm it us"... but nothing!!!
Do you know by chance if it is a configuration of the telephone?
thanks
I got this from elsewhere, never tried it:
Call Divert (all call types)
All
Set: **21*destination#[SEND]
Cancel: ##21#[SEND]
Query: *#21#[SEND]
No Answer
Delay nn seconds: max 30 seconds, in 5 second increments
Set: **61*destination*nn#[SEND]
Cancel: ##61#[SEND]
Query: *#61#[SEND]
Unreachable
Set: **62*destination#[SEND]
Cancel: #62#[SEND]
Query: *#62#[SEND]
Busy
Set: **67*destination#[SEND]
Cancel: ##67#[SEND]
Query: *#67#[SEND]
Cancel All
##002#[SEND]
Divert Voice Calls
All
Set: **21*destination*11#[SEND]
Cancel: ##21*11#[SEND]
Query: *#21*11#[SEND]
No Answer
Delay nn seconds: max 30 seconds, in 5 second increments
Set: **61*destination*11*nn#[SEND]
Cancel: ##61*11#[SEND]
Query: *#61*11#[SEND]
Unreachable
Set: **62*destination*11#[SEND]
Cancel: ##62*11#[SEND]
Query: *#62*11#[SEND]
Busy
Set: **67*destination*11#[SEND]
Cancel: ##67*11#[SEND]
Query: *#67*11#[SEND]
V
thanks
:wink:
Related
My P3300 takes a long tome to wake up when a phone call is coming in. Until it starts ringing, I have only about 1 second to answer, before it enters to the voice mail. I can see it "preparing" for incoming call (the small sign on the top bar), but until it start ringing - i sometime miss the call.
First I thought its the ringtone I chose, so I switched back to the default Windows ringtone - and still the problem continues.
I had a similar problem, I rang myself up from my landline to see exactly how long the phone took to ring and, it was just a few seconds. So I rang my operator O2 and they have me a code which I dialed up on the phonepad allowing me to choose in 5 second intervals how long the phone rings before going to answerphone.
I have MSVC 21040 running in a 21042 ROM. Out of the "box", the announcements didn't work. I am working on a solution to work around this issue. The only part I am having a hard time with is the length of the announcement itself ... It cuts off after ~3 seconds. My TTSAnnounce ringer script is "v0p". To disable the normal ring, I set the category for RingTone0 to "_Ring" (instead of "Ring"). The nice thing about disabling the normal ringer this way is that it doesn't interfere with the build-in Sounds and Notifications settings interface.
Example: Call from 012-345-6789 gets announced as "Call From 012-345-67"
or
Call from Joe Smith on Mobile is announced as "Call from Joe Smith on m..."
If I change the TTSAnnounce ringer script to "p" (remove the vibrate command), it works fine. If I use "pv0", it still works but no vibrate. Any ideas on how I can get vibrate and call announce? I also tried v1p, v1pr, v0pr, v0pw3r ... Same results as v0p. Also tried an "a" in front. This might be a bug in the OS ... I'll have to play around with some other ring tones and see if they get cut off. Is there a max ringer script duration setting somewhere?
Ok ... Here goes ...
I built a 21042 Titan ROM with PPCKitchen.org's BuildOS, including VoiceCommand. I had to change some registry settings to get it to announce my incoming calls, and these announcements were cut short.
I am 98% done building my own 21042 Titan Kitchen. When I use my kitchen, Voice Command announces the full message, and does not get cut short.
I don't know what the issue was, but it is no longer an issue for me.
Hi
Does anyone have ring delay on your TP2? When I do a test call to my TP2, It only ring after two ring tone from the other phone I call. or it is just me?
It is a bug or something that can be tune?
Okay I found the tweak, which work for me... phew!!!
Update: Found an old post with some great info and it seems to have worked for me doen to 1.5 rings till the ringtone comes on vs 2-3 check it out: The regedit seems to stick for me through soft reset
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0
Change 'Script' from 'av0pw3r' to 'av0pr' and you'll get 0 sec delay.
OR change it to
av0pw1r = wait for 1 sec
av0pw2r = wait for 2 sec
and so on...
++
Edit :
Here are the ringing codes
a - stands for display
r - repeat/replay the script again
c - sets the volume C50, c150, c100
f - means flash .. f1 flash for 1 second and f0 stands for flash continuously
p -means play ringtone
v- vibrate then incorporate with number to state how many seconds it will vibrate example. v3 vibrate for 3seconds or v0 for continous
w - stands for wait or pause then specify how many seconds like w3(wait for 3 seconds)
here are some examples
Flash - af1w60f0
Ring - apw3r
Ring Once - ap
Increasing Ring - c50apw3c150r
Vibrate Then Ring - v3w3apw3r
Vibrate - av3w3r
Short Vibrate - av1w3r
Vibrate Long Then Ring - v3w3v3w3apw3r
Vibrate And Ring - av0pw3r
Increasing Ring And Vibrate - c50apv3w3c150r
Fast Vibrate And Flash - af1v1w1f0r
Vibrate and Ring Continously without pausing - av0pr
info found here
http://www.ppcsg.com/lofiversion/index.php/t75344.html
Reply With Quote
radiowc said:
Okay I found the tweak, which work for me... phew!!!
Update: Found an old post with some great info and it seems to have worked for me doen to 1.5 rings till the ringtone comes on vs 2-3 check it out: The regedit seems to stick for me through soft reset
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0
Change 'Script' from 'av0pw3r' to 'av0pr' and you'll get 0 sec delay.
OR change it to
av0pw1r = wait for 1 sec
av0pw2r = wait for 2 sec
and so on...
++
Edit :
Here are the ringing codes
a - stands for display
r - repeat/replay the script again
c - sets the volume C50, c150, c100
f - means flash .. f1 flash for 1 second and f0 stands for flash continuously
p -means play ringtone
v- vibrate then incorporate with number to state how many seconds it will vibrate example. v3 vibrate for 3seconds or v0 for continous
w - stands for wait or pause then specify how many seconds like w3(wait for 3 seconds)
here are some examples
Flash - af1w60f0
Ring - apw3r
Ring Once - ap
Increasing Ring - c50apw3c150r
Vibrate Then Ring - v3w3apw3r
Vibrate - av3w3r
Short Vibrate - av1w3r
Vibrate Long Then Ring - v3w3v3w3apw3r
Vibrate And Ring - av0pw3r
Increasing Ring And Vibrate - c50apv3w3c150r
Fast Vibrate And Flash - af1v1w1f0r
Vibrate and Ring Continously without pausing - av0pr
info found here
http://www.ppcsg.com/lofiversion/index.php/t75344.html
Reply With Quote
Click to expand...
Click to collapse
Good knowledge!! Will come in handy later on..
I wonder, could someone code a program for managing these? It's a real pain to edit registry for changing ring settings. At least I didn't find any software for changing these, save the Total Commander
I guess it could be quite easy and light with checkboxes and value inserts, what do you think? I wish I could code myself Hardly manage to make "Hello, world!" with instructions.
It would be rather nice to see these incorporated into an existing ringtone manager like Ringo Mobile...
Hi Guys,
I want to do the following:
Select a SONG so that when I get a call from anyone my RING TONE continues to play....so for example after 8 rings or 9 rings it then goes to voicemail....
ANY ideas ??
Thanks in advance.
anyone ?
Have you altered the network/operator settings to the max which is usually 30 sec?
Simple
go to phone
enter:
**61*(voicemail #)**(# of seconds)#
where (voicemail #) = the number of your voicemail centre, and (# of seconds) = the lengh of ring before divert, usually max 30 seconds.
Thanks for the response guys....set mine to 25 seconds...perfect for my ringtone.
I have 2 Dasaita head units a HA2153-V840-8. and a HA5298B-V940. I love both units but have the same problem with both of them. When using voice guidance and receiving a phone call, the voice guidance goes up in volume and makes it very difficult to have a conversation. I have searched everywhere for something to change the parameters of voice volume
during a call have have not been successful.
There is an option in the Android, settings under "navigation" that has the options "monitor GPS" with the sub options, "mixing" and "Navigation sound with phone".
The "Mixing" option goes from -8 to +8 and the "Nav sound with phone" goes from 0 to 100% in 20% steps. Not only does adjusting these parameters seem to do nothing, but when simulating a gps route for testing, the voice volume almost doubles in volume when you start a phone call. It does this on both of my Android gps car units, one running Android 8 and one running android 9.
Please help as every time I get a phone call in the car the voice guidance interrupts and make the conversation impossible .
the baz said:
I have 2 Dasaita head units a HA2153-V840-8. and a HA5298B-V940. I love both units but have the same problem with both of them. When using voice guidance and receiving a phone call, the voice guidance goes up in volume and makes it very difficult to have a conversation. I have searched everywhere for something to change the parameters of voice volume
during a call have have not been successful.
There is an option in the Android, settings under "navigation" that has the options "monitor GPS" with the sub options, "mixing" and "Navigation sound with phone".
The "Mixing" option goes from -8 to +8 and the "Nav sound with phone" goes from 0 to 100% in 20% steps. Not only does adjusting these parameters seem to do nothing, but when simulating a gps route for testing, the voice volume almost doubles in volume when you start a phone call. It does this on both of my Android gps car units, one running Android 8 and one running android 9.
Please help as every time I get a phone call in the car the voice guidance interrupts and make the conversation impossible .
Click to expand...
Click to collapse
I fixed this by adding [android]
lock_to_external_sd=1
fullscreen=1
; SELECT AUDIO STREAM:
; 0 - STREAM_VOICE_CALL
; 1 - STREAM_SYSTEM
; 2 - STREAM_RING
; 3 - STREAM_MUSIC
; 4 - STREAM_ALARM
; 5 - STREAM_NOTIFICATION
; 6 - STREAM_BLUETOOTH
; 8 - STREAM_DTMF
navigation_audio_stream=3
and
[sound]
csv_voice_enabled="1"
ding_muted=1
pause_mp3_sooner = 500
dev_buffer_size=200
android_muting_device=0
guidance_distance_offset=50
;### (1) read by dex file, 0 fix for Android 4.x
;android_muting_device=1
;auto_mute=1 ;(0)ICS/JB
;keep_alive_speaker= ;(0)
;speaker_resume_sec= ;(3)
;allow_no_buffer_return_on_zero_volume= ;(0)
;logarithmic_volume= ;(0)
;compressor_switches_on_ui= ;(0)
;enable_silence_playing_muting_device= ;(0)
dynamic_volume_type=1
dev_channels=1
to the sys.txt and it now mutes when the phone is being used. Hope that helps someone else.