Related
hallo friend, i ve a big problem on my p3300, i have downloaded program much important for my job as FIELD TEST, but on artemis does not works.
so i have read on web more more pages and i understand that the problem is a dll that in p3300 /windows there isnt: rilgsm.dll.
without this dll some port are closed on my htc i suppose com 9 and 6 (network ) so field test doesnt work propely!
can someone explane me how i can solve this problem or i can extract or add this dll.
i have actually italian wm6 official on my p3300 , but i can install also a unofficial rom with rilgsm.dll.
i wait for help as soon as possible
thanks
rilgsm.dll is in the Artemis Touch 4.01 WM6.1 WWE ROM - Lite without cube ROM as well as the other versions (full, vanilla, etc) I suppose.
But, I'm not sure that is the complete answer to your problem. I was trying to run a program which ran fine on my previous PPC using com6 but would not run on my Artemis using com4 (needed to run TomTom). Today, I found a solution here that works. It's called portsplitter. I installed it today and sucessfully used TomTom (requires com4) and the other program (requires com6) as well on the newly created com8! (see the link above to makes sense of that). Maybe what you need?
Here's another link in the Artemis forum discussing this issue.
runningtiger said:
rilgsm.dll is in the Artemis Touch 4.01 WM6.1 WWE ROM - Lite without cube ROM as well as the other versions (full, vanilla, etc) I suppose.
But, I'm not sure that is the complete answer to your problem. I was trying to run a program which ran fine on my previous PPC using com6 but would not run on my Artemis using com4 (needed to run TomTom). Today, I found a solution here that works. It's called portsplitter. I installed it today and sucessfully used TomTom (requires com4) and the other program (requires com6) as well on the newly created com8! (see the link above to makes sense of that). Maybe what you need?
Here's another link in the Artemis forum discussing this issue.
Click to expand...
Click to collapse
thanks for answer, maybe can you explane how i can set ports?
i need only field test works , it is only excutable file, no need installation, there isnt configuration to do , is very simple, maybe i can send to ou the file to test.
i wait for help thanks again
pls help me
I don't know how to copy just the rilgsm.dll file you want. It's part of the rom and so access is denied on both the phone and via activesync.
Also, I don't know how to set ports. Did you try the portsplitter application I linked to above? I am using an application on my phone right now that uses port 6 thanks to the portsplitter application. Try it!
Upload your application here or post a link, and I'll see if I can give it a try.
i ve uploaded file here: http://www.megaupload.com/it/?d=ZL2OLMS0
please try it, anyway i dont know how to use port spkitter right mode, maybe i wrong to setup it
for it i need help
no one answeres.........
what's up with the (mad) face man? I have been trying to help you. I had a busy weekend and we are in totally different time zones - so relax.
Here, I will spell out very clearly how to use portsplitter...
Artemis settings:
start menu\settings\system tab\external GPS
programs tab...com8
hardware tab...com9/baud 4800
access tab...tick (select) manage GPS automatically
PortSplitter settings:
input: using your keyboard type COM8
baud: select 4800
output: select com6 and press 'add' then press 'start splitter'
the program will then be running in the background
Now go to your fieldtest app and set it to use com6 at 4800 baud. Or, if you know it uses com6 by default, just open it and see if it works.
If it works, you have two options. You can either start portsplitter each time you want to use it. Or, go back to the portsplitter app and tick 'autostart' so a link will be placed in the \windows\startup folder and you won't have to start it manually each time you reboot. It will always just run in the background. (edited to ad...) Actually, selecting 'autostart' only saves your settings so each time you open portsplitter it will run on com8 etc. You need to manually put a shortcut in the windows\startup folder for it to actually start up each time you turn your phone off and back on.
Now, if you use the portsplitter AND any other GPS programs (i.e. TomTom), you'll need to set that program (i.e. TomTom) to use com6.
In TomTom you do this by pressing the lower right hand corner of the screen where the clock and signal strength bars are. On the next screen press the right hand side of the screen where the battery status and signal strength bars are. Now press the lower left corner button called 'configure' and choose 'other NMEA GPS receiver' and press 'select'. Set the baud rate on the next screen for 4800 and press 'done'. Finally, press 'com:6 Port Splitter' and press done!
It works fantastic on my Artemis. I have another GPS program and I set up the GPS communications to use com6 at 4800 and it works like a charm as well. I've set PortSplitter to autostart after each boot, and I haven't given it a thought since. It just works.
I tried to download your app but there is a message that says "The file you are trying to access is temporarily unavailable."
I have fieldtest running on my Artemis right now. It looks like it auto sets itself to refresh every 3 seconds. The right hand side of the screen is called 'GSM' the left is called 'data'. Almost all data fields say N/A except for RSSI and Rx Quality. So, it looks like it runs, but does not work.
Probably due to this:
"fieldtest is not compatible with 9100/Prophet/Artemis. For those devices you need to use GSMTestMode.exe"
However, just in case you might still find this info useful...before trying fieldtest on my phone, I searched what it was about and found the info here. You may have already read it, but if not, there you go. BTW, (if you DID read it) you could have just directed me there to download the program rather than how you did it.
Lastly, I tried the registry edit:
HKEY_LOCAL_MACHINE -> SOFTWARE -> HTC -> EngineerMode -> BuildInEngineeringModeApp = 1
It changed nothing, the program is still mostly full of N/A responses. Also, ran the program from \windows and got the same responses as when I ran it from the memory card.
GSMTestMode.exe exists on my Artemis in the \windows folder.
To use it check this registry setting:
HKEY_LOCAL_MACHINE -> SOFTWARE -> HTC -> EngineerMode -> BuildInEngineeringModeApp = 1
Mine was 0 originally. I changed it to 1 and soft reset the phone. Then, opened the \windows folder and clicked on GSMTestMode.exe and all the info shows up instantly.
That was with portsplitter running in the background. So, I disabled portsplitter, soft reset and clicked on GSMTestMode.exe again - and it worked. Using/not using portsplitter made no difference. I did not check the values reported since I don't care enough. The rest is up to you.
thank you very much runningtiger, your info were very very precious for me, now works all fine.
only 1 problem: after i edit value from 0 to 1 in registry, gsm test mode works fine , but if i reboot artemis or shutdown and restart registry value back 0.
is there any way to solve?
bye and thanks again
This isn't an issue on my phone. I made the registry change using TotalCommander and used the exit command on the menu to close TotalCommander (rather than the X in the upper right hand corner). Then, I soft reset by pressing the reset button with the stylus. When my phone was ready to go again, I opened GSMTestMode.exe used it, closed it, then reset my phone again, used GSMTestMode.exe again and it worked again. So, the registry change sticks on my phone.
Usually the reason registry changes don't stick is not enough time passed before soft-resetting the device. Some registry changes are ready to use immediately, but others take a moment to actually write to the registry and if that process is interrupted then the change isn't actually made.
Three thoughts on your phone...
1) did you wait about a minute after making the registry change before soft-resetting your phone? This allows plenty of time for the change to be actually written to the registry.
2) wait a minute after doing the registry change, then try instead of soft-resetting doing a full power down by holding the power button until you are asked if you for sure want to turn off the phone and then let it sit a minute (off) before starting it up again?
3) can you try using TotalCommander to make the registry change like I described above?
runningtiger said:
This isn't an issue on my phone. I made the registry change using TotalCommander and used the exit command on the menu to close TotalCommander (rather than the X in the upper right hand corner). Then, I soft reset by pressing the reset button with the stylus. When my phone was ready to go again, I opened GSMTestMode.exe used it, closed it, then reset my phone again, used GSMTestMode.exe again and it worked again. So, the registry change sticks on my phone.
Usually the reason registry changes don't stick is not enough time passed before soft-resetting the device. Some registry changes are ready to use immediately, but others take a moment to actually write to the registry and if that process is interrupted then the change isn't actually made.
Three thoughts on your phone...
1) did you wait about a minute after making the registry change before soft-resetting your phone? This allows plenty of time for the change to be actually written to the registry.
2) wait a minute after doing the registry change, then try instead of soft-resetting doing a full power down by holding the power button until you are asked if you for sure want to turn off the phone and then let it sit a minute (off) before starting it up again?
3) can you try using TotalCommander to make the registry change like I described above?
Click to expand...
Click to collapse
i resolved upgrading to wm6 official and now works all fine, so my friend thanks again for support and precious infos
i have been compiling my own ROM using the available tools. it is almost at what i would call perfect, except for a few issues that i am unable to solve. any knowledge and help would be highly appreciated!
1) in the Control Panel, i would like to remove the following items:
encryption
managed programs
usb to pc
2) setting the IE homepage: I have set (by adding to an .rgu file)
[HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Abouturls]
"home_0409"="http://www.google.com/m/classic"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Abouturls]
"home"="http://www.google.com/m/classic"
but no matter, after i flash, it always goes to "http://mobile.htc.com"
obviously my settings are being overridden elsewhere, but i have searched for hours and have not found where from.
3) i am trying to delete the registry entry:
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
"Extension"="Rilphone.dll"
i have placed in an .rgu file the following entry:
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
"Extension"=-
but no matter, the first entry is always present after flashing.
4) i cannot figure out where the Resco Explorer registration info is located so i can have it registered from the start. i have search and found that i am by no means not the only one with this problem, but no one has reported success.
5) i am using the Vista Cube, and somehow the name entries for the "email" and "sms" tiles have been switched. once, again, i have placed correcting entires, but they are apparently being overridden.
other than these issues, i have created my perfect rom! if anyone can help on any of these, please do report. thank in advance.
P.S. I have posted the same here and here.
i have been compiling my own ROM using the available tools. it is almost at what i would call perfect, except for a few issues that i am unable to solve. any knowledge and help would be highly appreciated!
1) in the Control Panel, i would like to remove the following items:
encryption
managed programs
usb to pc
2) setting the IE homepage: I have set (by adding to an .rgu file)
[HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Abouturls]
"home_0409"="http://www.google.com/m/classic"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Abouturls]
"home"="http://www.google.com/m/classic"
but no matter, after i flash, it always goes to "http://mobile.htc.com"
obviously my settings are being overridden elsewhere, but i have searched for hours and have not found where from.
3) i am trying to delete the registry entry:
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
"Extension"="Rilphone.dll"
i have placed in an .rgu file the following entry:
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
"Extension"=-
but no matter, the first entry is always present after flashing.
4) i cannot figure out where the Resco Explorer registration info is located so i can have it registered from the start. i have search and found that i am by no means not the only one with this problem, but no one has reported success.
5) i am using the Vista Cube, and somehow the name entries for the "email" and "sms" tiles have been switched. once, again, i have placed correcting entires, but they are apparently being overridden.
other than these issues, i have created my perfect rom! if anyone can help on any of these, please do report. thank in advance.
P.S. i have posted the same here and here.
I am having problems with applications under Windows Mobile 5.0. When i try to run them i get the following error.
The file 'foo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
1)Is there anyway of disabling the checks for trusted applications in Windows Mobile 5.0 on the Wizard?
I think this error becuz u r trying to run wm6 applications under wm5
vodovodo said:
I think this error becuz u r trying to run wm6 applications under wm5
Click to expand...
Click to collapse
I have same problem for BA wm 6.1 5.2.19199.1.0.0 PV DVH. Some people offered solution of HR. I don't agree with this. because we have to lose what we've been installing and spend more time re-installing them. so much time-wasting?
Any other solutions, please?!
Thanks in advance.
Problem may be cause of your SD card if u r using WM6. SD card PowerManagment value is set("DisablePowerManagment") to 0 in your registry. This means after a while your device will set your SD card power off for savg batttery. This cause to unread your program files etc while u start any program on your form your SD card device.
I fixed this problem like that;
By any registry editor:
Find the Path:
"Hkey_local_machine>drivers>sdcard>clientdrivers> class >SDMemory_Class"
after that find;
""DisablePowerManagement"" key and set its value to "1" than save and exit. Than soft reset your device. Problem will be fixed.
Sorry for my bad english.
Windows Mobile powered devices are shipped with default security settings.
The security model enables Mobile Operators to make post-production changes to security settings.
This can place significant restrictions on software which has not been signed and approved.
However you can change the default settings.
Take control of applications on your phone.
"All listed settings are decimal"
1. Connect the phone through ActiveSync.
2. Run your favorite remote registry editor "CeRegEditor (Download)" "Mobile Registry Editor (Download)" on your PC. http://ceregeditor.mdsoft.pl/
3. Navigate to HKEY_LOCAL_MACHINE\Security\Policies\Policies
Unsigned Prompt Policy:
This policy indicates whether the user is prompted to accept or reject unsigned .cab, theme, .dll and .exe files.
HKEY_LOCAL_MACHINE\Security\Policies\Policies
DWord = 0000101a Data = Use the following-->
0 = Indicates user will be prompted.
1 = Indicates user will not be prompted.
you will set that register decimal 1. that is solved problem
I have a HTC Tytn II and i get the same error. However, When trying to alter data using the reg editor you recommended, i found the 0000101a was already set to 1. Any other ideas?
Hi All,
Would someone be so kind to me a explain how I can move a package from the EXT directory or one Kitchen to the EXT directory on this version of kitchen.
I thought I could just simply copy the directory? So I had a go compiling a version of youtube from a different kitchen It would seem mot to work thou as I get the dreaded The file 'xx' cannot be opened. Ether it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.
Any ideas how to get this to work?
Or look for the tool MsSigner, it can be found in most kitchens.
You'll be able to sign it with a signature that is accepted after you aply the enablyRapi and SPCCerts policies.
You're probably missing a key dependency package like dshow (mshow?) or concurrence manager. Also, make sure the shortcut path is valid. Lord knows why, but that's the message you get for bad shortcuts.
josephwsl said:
I am having problems with applications under Windows Mobile 5.0. When i try to run them i get the following error.
The file 'foo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
1)Is there anyway of disabling the checks for trusted applications in Windows Mobile 5.0 on the Wizard?
Click to expand...
Click to collapse
maybe .NET CF is missing or not up-to-date?
RAMMANN said:
maybe .NET CF is missing or not up-to-date?
Click to expand...
Click to collapse
ahh i love you bro, u saved me an hassle i tried everything and it was the net.cf
damii said:
you will set that register decimal 1. that is solved problem
Click to expand...
Click to collapse
When I try that, I'm told I don't have the authority to access that. :-(
now what?
Yeah, me too!!!
All of a sudden too. Everything was fine then I got these certificate errors every time I try to run Haret.exe to run android. This happened last night. Did my provider change something on me?
I try to change that registry key and it won't let me.
Re:this post
I have same problem for BA wm 6.1 5.2.19199.1.0.0 PV DVH. Some people offered solution of HR. I don't agree with this. because we have to lose what we've been installing and spend more time re-installing them. so much time-wasting?
You need hard reset!
Same problem "certificate errors" and a hard reset wont work
Plz help
damii said:
Windows Mobile powered devices are shipped with default security settings.
The security model enables Mobile Operators to make post-production changes to security settings.
This can place significant restrictions on software which has not been signed and approved.
However you can change the default settings.
Take control of applications on your phone.
"All listed settings are decimal"
1. Connect the phone through ActiveSync.
2. Run your favorite remote registry editor "CeRegEditor (Download)" "Mobile Registry Editor (Download)" on your PC.
3. Navigate to HKEY_LOCAL_MACHINE\Security\Policies\Policies
Unsigned Prompt Policy:
This policy indicates whether the user is prompted to accept or reject unsigned .cab, theme, .dll and .exe files.
HKEY_LOCAL_MACHINE\Security\Policies\Policies
DWord = 0000101a Data = Use the following-->
0 = Indicates user will be prompted.
1 = Indicates user will not be prompted.
you will set that register decimal 1. that is solved problem
Click to expand...
Click to collapse
Thanks! That really helped me. You literally saved me a good night sleep. I was already desperate.
Wow, it works Thank you!!!
Awesome!!!
This worked perfectly. Thanks so much for the help. I've been racking my brain about this for over an hour now, then found this through a search.
Thanks!
OMG
I have the same problem and I tried :
1/ Hard Reset
2/ Rom Update
3/ installed NetCFv3.5
4/ editing values in the registry
what els ????!
plzz i need your help
I have an HTC HD Mini with Manila 2.5.20131825.3 I am not sure which program I did uninstall and the quicklaunch icon asociated to that program become light grey.
Now when I clic on that icon a message appears sayin that "" file cannot be open...
you can see the screens at
ttp://img842.imageshack.us/img842/7476/captureyt.jpg
ttp://img63.imageshack.us/img63/5952/capture2iy.jpg
Can anyone tell me on which file or registry key does the manila save the quicklaunch links so I can erase this entry because using the gui I cannot either remove it or add a new one instead. It is becomeng me crazy as hell.
Thanks a lot!!!!
Which ROM version are you using? Maybe there's a ROM upgrade available
my ROM version is 1.36.412.1 (94538) ESN
Do you know if there is an update?
In case there is an update available if I apply the new ROM will that erase the whole device? I mean, would I need to re-install all the software? because I have several programs and I would have to start recollecting the installers before erasing the device.
Thanks a lot for your answer!.
You have the newest ROM. And yes, when you install a ROM update all data on your device is erased. You can compare it to install Windows 7 on a XP machine, all data should be back-upped.
I don't know what's causing your issue here. I'll try to reproduce it And then try to solve of course
Possible solution
All right, this is what you should do
Just install the cab file below and reboot your device Because I can't make a cab file with only registry tweaks, there will be a txt file in your My Documents folder Just delete it
PS: If you find one of my answers helpful, please hit the "Thanks" button