Develop Bugs

Verdict on Piel Frama Leather case from a user

8 weeks ago, I got a Piel Frama cow skin leather case for P3300 in black and tan colour. If ever I saw a pretty leather case, this was one! It was absolutely stunning. But that's where the good news ends. I found the case quite weak in offering protetion in all but the most docile useage scenarios. The case often detaches from the provided belt clip during simple motion such as getting in and out of your car. Also, the PDA is not held firmly in the case, such that it can easily fall out once the top flap is open (and you must open the top flap to make a call). If the top flap becomes undone while the case is attached to your belt (and it is easy for the top flap to become undone by itself while you are walking), there is a high chance the phone would drop out of the case and onto the floor as you walk along. That happened to me twice! I almost lost the phone on one one of those ocassions. So, funtionality is in the dumps for this case. But it doesn't end there. It seem that durability/quality is in question too. After eight weeks of pretty average usage, the leather is beginning to come loose around the screen area. It appears like the different layers that were glued to gether in the construction are coming apart. I will write Piel Frama and hear what they have to say, but I don't think I am buying another product from them again.

Get a Krussell leather case. It has lifetime warranty(I think) and you just call them and they will send you a replacement.
I had experienced this before. Its a good leather case and a good company.

Also I have bought a Krusell leather case for P3300 several months ago and for me it is very good.
The only problem is that the case very increases the thickness of pda and therefore I put the pda in the case only when I use it in a dangerous place, like on the beach.

I have a Piel Frama around my Orbit. For me, it's the best made, snuggest fit, nicest PDA case I've ever had. I don't use the belt clip, and yes that part does look weak. I'd certainly buy one again.

I also have a Piel Frama and a Krusell. I prefer the Piel Frama.

I suspect you have a faulty case because the Piel Frama case I have is superb. I have been using it for 6 months and the case is still like new and there are certainly no issues with fit or practicality. The company were also very impressive with ordering and delivery so if thats anything to go by I reckon the customer service will be excellent for you. Good Luck.

EIXO
I can also recommend the EIXO case. Fit is perfect, has also a removable holder (also with adapter for car cit) and the leather really protects. I had the case already

[Q] Innocase for Droid 2 - "Now shipping"

According to Seidio's online store their Innocase is now shipping. Innocase is well reviewed for other phones. Anyone have comments on their new Droid 2 version?

Otterbox is coming out with one soon, its posted on the website. I'm excited for that. I honestly prefer Otterbox over Innocase.

kwheel596 said:
Otterbox is coming out with one soon, its posted on the website. I'm excited for that. I honestly prefer Otterbox over Innocase.
Click to expand...
Click to collapse
Was gonna buy the seidio, till I saw the otterbox case... now I don't know which to get

Innocase on the way
The Otterbox case seems similar to Innocase i.e. polycarbonate shell with a thin rubber-like coating to aid gripping. I already have a screen protector in place (and a spare) so I didn't need it (included with Otterbox).
Other cases I read about had issues with the slide keyboard. Either the case interfered with sliding or it was thick enough to block some of the top row of keys.
I went ahead and ordered the Innocase combo..... Innocase plus belt holster. Should arrive in a few days. I will post my impressions of the case.

oldcyberdude said:
The Otterbox case seems similar to Innocase i.e. polycarbonate shell with a thin rubber-like coating to aid gripping. I already have a screen protector in place (and a spare) so I didn't need it (included with Otterbox).
Other cases I read about had issues with the slide keyboard. Either the case interfered with sliding or it was thick enough to block some of the top row of keys.
I went ahead and ordered the Innocase combo..... Innocase plus belt holster. Should arrive in a few days. I will post my impressions of the case.
Click to expand...
Click to collapse
yeah, I tried one of the verizon OEM cases, and it definitly hindered the opening of the keyboard, and the top row. Enough so that I have serious doubts about whether any case will not have this problem.
Also I've had the misfortune to already drop my phone (albeit short drop), and whatever the material that surrounds the screen is EXTREMELY brittle, and shattered off a fair number of chunks.
That being said, I think I'll probably just wait on a case until perhaps my phone starts "having lots of problems" a week or so before the warranty is up and I have to get a replacement one.

oldcyberdude said:
The Otterbox case seems similar to Innocase i.e. polycarbonate shell with a thin rubber-like coating to aid gripping. I already have a screen protector in place (and a spare) so I didn't need it (included with Otterbox).
Other cases I read about had issues with the slide keyboard. Either the case interfered with sliding or it was thick enough to block some of the top row of keys.
I went ahead and ordered the Innocase combo..... Innocase plus belt holster. Should arrive in a few days. I will post my impressions of the case.
Click to expand...
Click to collapse
Let us know if it fits the OEM multimedia cradle please (if you have one).. I'm dying for a good case that fits the cradle and doesn't hinder the keyboard like most of the hard shell ones i've tried (including the VZW and some cheapo ebay one)....

Lithoss said:
Let us know if it fits the OEM multimedia cradle please (if you have one).. I'm dying for a good case that fits the cradle and doesn't hinder the keyboard like most of the hard shell ones i've tried (including the VZW and some cheapo ebay one)....
Click to expand...
Click to collapse
It does not fit the cradle--between me and my 2 coworkers we have been thou 6 or so different cases and this is def the best one so far. No interference with the keyboard slide either, if the case was any thinner it would fall apart.

Nightrage said:
It does not fit the cradle--between me and my 2 coworkers we have been thou 6 or so different cases and this is def the best one so far. No interference with the keyboard slide either, if the case was any thinner it would fall apart.
Click to expand...
Click to collapse
Hmmm. That stinks it doesnt fit. Sounds like a very good case though.
I may have to take my dremel to the cradle

Assessment of the Seidio Innocase
I bought my Innocase via Seidio on-line store. The process was easy and shipped the same day via FedEx. I purchased the combo of the case and holster. However, Henry Ford must have been the design consultant for the D2 case. Unlike cases for the iPhone, you can have any color as long as it’s black. My wife reports that this is so BORING!
The case is made of a polycarbonate that is coated with a thin non-slip rubber-like material to improve gripping the phone. The case is only about 1/16 inch thick. The Innocase comes in 2 pieces that attach to the lower (sliding) and upper (display) portions of the phone with very small tabs that grip the edges. Though very small, these tabs secure the case well. Installation is a snap . I can report that the Innocase does not interfere with sliding mechanism in any way. Cutouts are provided for all phone items such as power connector, headphone jack, microphone, speaker, volume control, camera, power switch etc. The case does remove easily for access to the battery/ microSd.
Regarding operation of the slide out keyboard; I have found no difficulties. The D2 (without case) has less than 1/8 inch space above the top row of keys. The Innocase uses a minimum amount of this space. I found that even with my fat thumbs I had no difficulty (i.e. no missed or erroneous key presses) using the upper row of keys. In fact if I slipped my thumb up against the edge of the case I was positioned right over the top row keys.
Seidio has 2 holsters available; non-cased devices and Innocase devices. I have the Innocase holster. The holster is well built and provides a secure belt attachment. The belt clip swivels allowing vertical, 45-degree or horizontal carrying of the phone. To secure the phone you slip it in on the bottom and snap the clip on the top. The top clip is offset so it does not interfere with headset & power switch if you clip in with the screen facing in. The inward facing screen is recommended to reduce screen scratch risks. The holster is felt lined to protect the screen.
In summary I am very happy with the Innocase and belt holster. They are well designed and constructed. I recommend them for anyone with a Droid 2.
I do not own a cradle. I notice Seidio has a cradle for the Droid that works with Innocase. I would call them and see if the same cradle will work with the D2 & Innocase.

Thanks for the reviews. Sounds like the best case out there for sure.
Would you mind posting some pictures when you get a chance please? The pics on the seidio site are pretty weak. thanks!

Case and holster photos
Not much to look at
Case back shows cutouts for camera, speaker and USB power. Dull black exterior finish. Case front (not shown) is even less to look at, just a big cut for the screen.
Case tab picture shows a close up of the small tab that clicks onto the phone to secure the case. 4 places on both back and front halves. The shining finish evident in this photo is the interior of the case.
Holster picture shows the support for the bottom of the phone (on left of photo). The clip on the right secures the top of the phone and allows easy removal. On the bottom of the photo is the belt clip.
Hope these help.

I bought the Seidio surface case after finding the el-cheapo snap-on case I bought from an Amazon marketplace seller to be too bulky. The Seidio is no less bulky and was not even as well designed as the cheapo one (which afforded better access to the bottom row of soft buttons). I returned it to Seidio (out my $5 shipping, which was more than the entire cost of the cheapo one), and think it's unconscionable that they charge $30 for these two bits of plastic.
BTW, I have since tried one of the soft gel style cases for the A955 that they sell on ebay -- the kind with the "track slider" that keeps the two gell halves together (sort of like a ziplock plactic channel). This contraption was a completely useless mess, which fortunately only set me back $3 including shipping.
Ultimately, I think the D2 is a relatively thick device that really cannot accomodate a case without becoming way too thick. Thankfully, I've come to realize that it doesn't need a case - it already has Gorilla class and a rubberized back. Why bother with more? Mine's been dropped a few times with no signs of the drop at all except to the chrome paint around the edges, which flakes off easily.

Do you have a pic with it on the phone?

Extended Battery cases

Just thought I would throw this out there for the people that are asking
http://www.amazon.com/Hyperion-Incr...5C/ref=sr_1_95?ie=UTF8&qid=1328665651&sr=8-95
If any one actually buys these remember to throw out a friendly review.

I tried that one out... it's okay. Currently rocking the one made by MoreTalkTime... which is not bad either.
Anyone try to do a cutout? I bought a tpu case and failed big time at cutting out the back. Arts and crafts are not for me I guess.
Sent from my Incredible 2 using xda premium

I'm trying this at the moment. Though, currently attempting to cut through the last layer of my ballistic case. Call me crazy, I was bored. It doesn't seem to be turning out too bad. The last picture shows the cut out square blocks which give an idea of what I will glue together and try to attach onto the hard piece of ballistic case using strong rubbery glue over super glued plastic side walls. Who knows, if it fails I will just buy a replacement case and cover.

I have done a cut out on a silacone case before with...well lack luster results. It basically looked like extra padded bumper.

After a few days, i am pretty happy with this: http://www.amazon.com/gp/product/B00669H7Z0/ref=oh_o00_s00_i00_details
not a perfect fit if you use the HTC extended battery... but it fits well enough.
I'm not 100% satisfied, but only because I wanted a case that was extremely snug. This is not that case... but it fits w/ extended battery. Hard to really argue against it for 8 bucks too.
I'm tempted to just get this: http://shop.htcpedia.com/incredible-2-extended-battery-cases.html
but I dunno... i'm sure those are just TPU cases that someone else cut out by hand... more or less doing what I wish i could do with an xacto knife.

Making the Moretalktime case snug...
I have the HTC extended battery/back and purchased the moretalktime case.
Also was a little loose and just didn't feel as snug as I'd hoped, especially for a tpu case.
Simple solution though. Find a piece of material that's about 1mm thick and cut out a rectangle to insert inside the moretalktime case before sliding the phone in.
For me I used an old leather wallet I had laying around and cut out a rectangle to fit so it's not visible from any of the moretalktime case cutouts.
This gives a perfect snug fit all the way around and makes the case perfect for use with the HTC extended battery/back.
Just thought I'd share.....haven't found any other combo out there like this.

That's an interesting idea... a piece of leather just to pad it a bit.
It figures that we would have to add something in order to make the case feel sung.

Leather carry case for note 2 with protective cover plus

Anyone know of a horizontal leather belt carrying case with magnetic close that can hold the phone but with a touch more room than the standard size? I've just got the protective cover plus and it's great, hardly know it's there, adds more grip, protection, and looks like it's part of the phone, however it obviously adds a couple mm round the edges and now it won't fit in my existing leather pouch...
I've seen the XXXL ones on the american amazon, but being in the UK I'm hoping there might be something in this country? Also I think with XXXL it says it can hold the otterbox commuter so I'm thinking it might be too big.

I've heard this one allows some extra bulk:
http://www.amazon.co.uk/Horizontal-...8&qid=1369055316&sr=8-3&keywords=note+2+pdair
But I cannot guarantee it will fit.

i just posted that one in his other thread, but i can guarantee it will fit(only barely though)

Seidio Dilex Case

Hey XDA,
I recently ordered this case to replace my Ringke Fusion (which I both like and hate) and hopefully I will like it enough to keep it as my long term case. I haven't noticed much as far as reviews for this particular case so I was thinking of doing one for it. I have a new qi charger coming with it so I should be able to test that and see if it adversely affects the glass screen protector I have on right now. If anyone out there is interested in pictures of the case on the phone or anything like that, let me know and I'll do my best to include them when I review it on Thursday, I'm a little bit of a case junkie and typically try out several for my phones during their life time, but this is the first higher end case I'll have for the N5 and I'm really excited to see how it turns out.
Seidio Product Page
moonDOOM

Probably no real reviews of this case because they're already well-known. Others have already posted, and I'll back it up, Qi wireless charging works perfectly with it. Simply the best cases you can buy. Also, the holsters are pretty fantastic.

I got the case in today and as apparently everyone knows already, this case is quality made. I previously had a Ringke fusion case on my N5 and liked being able to see the nexus logo, but hated the tpu layer and how the back collected dust every time it was put into a pocket. I decided to go with a more traditional 2 layer case and I thought that the Seidio Dilex looked the best out of the ones currently available.
Pros:
- After seeing the product in person, I'm immediately sold on this design. The case is much darker black than it appears on the website (bright lighting in their product photos) and the rubberized coating on the PC layer is the classic silky smooth texture that Seidio is known for and has used for years. On a side note, the other colors are actually really nice looking too if you prefer something other than black and it looks like they have the same texture coating. The case feels really good in hand because of the soft texture and the silicone actually feels really similar.
- The kickstand also adds just a little weight to the bottom of the phone and makes it somewhat easier to balance, hold and manipulate with one hand. Speaking of the kickstand, it's actually aluminum instead of plastic which is a nice touch. The best part is that the kickstand is spring loaded (slightly) to the outward position but also contains a magnet to hold it securely in place when not in use. It appears to be pretty well attached to the case so hopefully it will hold up over time.
- The ports are all pretty well lined up with the cutouts and they seem big enough to accommodate most cables.
- Qi charging works just fine, at least on the cheap chinese one I also got in today. NFC doesn't appear to be affected either, although I only tried once.
- I'm currently using a Nillkin glass screen protector and it appears that the silicone is soft enough not to interfere with the edges of the screen protector. May not be the same with other brands.
Cons:
- The only thing I can think of is that because the outer layer only presses the edges in the middle and corners, the silicone seems to be a little loose or saggy inbetween the "arms" of the outer shell. I'm hoping that settles into place over time but if it catches on my pockets too much, it might actually get worse.
- The sticky texture is great for grip, but also picks up a lot of dust, but that's not news to anyone who has used a silicone case before.
In conclusion, I'd probably give this case 4.7 out of 5 stars. I like just about everything about it but I wish the silicone they used was just a little less pliable.
Pictures of the Case
Sorry, I know the pictures are garbage (I had to take them with my old phone so the N5 could be in the case) but I'd be happy to answer any questions y'all might have.
moonDOOM

Looks real nice little too thick for my taste though.
Sent from my Nexus 5 using Tapatalk

This looks almost exactly like the generic thick kickstand cases that are being sold under various brands at various prices.

Dilex Case and Qi
Good morning. I wanted to follow up on your case experience with Qi charging I put this case on a Samsung Galaxy S5 and used a powerbot circular charging pad. I found that to get the charger aligned, I needed to prop the device up on the kickstand so it was a little firther from the pad, and I could not get a charging lock.
I'm trying to figure out if that is a function of the powerbot's charging signal or the anatomy of my Qi pad. Does your phone sit square on the charging pad? or is it propped up on the kickstand?
Thanks,
Marcva