Related
Which one is the best? Please let me know I don't know which one to buy for my Droid X. Also if you know of any heavy protection cases for it just comment below...
can someone plz answer this haha i really wanna know i think its between the seidio rugged and the otterbox defender in my opinion but plz help me out which do you guys think would be the best heavy protection case?
I have both the seidio, and the otterbox. The Otterbox wins at everything but Seidio has the better holster.
Sent from my DROIDX using Tapatalk
I ordered the Trident to replace my Rugged. The Trident is better in my opinion. The rubber on the rugged wore out within a month. The trident also seemed to be thinner and molded to fit my hand better. I almost got the Otterbox, but I am glad I ordered the Trident instead.
As far as protection goes, I don't think you could go wrong with any of the three as all are built like tanks.
I have the Seido one and I have loved it. I love it has a piece of rubber to cover over the camera so that nothing can scratch it. I have been debating about getting the Otterbox but dont really now if I want to or not
I work heavy construction (demo of fire damaged houses) and I roll up my sleeves and get in there with my guys on a daily basis. Needles to say; the case gets a BEATING. The case is on my tool belt at all times, the phone does get answered whenever it rings; my gloves usually have foreign matter that should not be allowed within 10 feet of anything electronic. 90% of my guys have Androids and we use Tikl alot as well. We had a number of "rugged" cases come and go, but Otterbox is the winner.
I have had my hands on all three and nothing beats the $14.99 Dual Layer Vertex Case I found @ Techie Warehouse. I would definitely recommend googling this. Have you ever taken a good look at the Seidio Innocases... they are molded with cheap plastic and when you drop your Droid X with the Innocase the two piece snap on just comes apart half the time so you end up with a minor scuff.
I haven't used Seidio or Trident, but I own the Otterbox Defender. A regular $50, you can find it for $35 shipped on eBay. I'm definitely happy and don't have anything bad to say about it.
It has rubber flaps to cover all plug openings and they fit snug, all buttons are covered and pressable through the rubber, and the screen sets in about 1/8" so if it sits on its face it is not sitting directly on the screen. There is also a built-in screen protector. The camera also sets in so there is no resting the phone on the camera. I particularly like the holster because you can place the phone in any of 4 directions and it snaps in perfectly: screen out - either direction, screen in - either direction. The case is easily removable if you need to get to the inside quickly, such as the battery or sd card.
It was basically the best $35 I've spent on an accessory for my X (with the 5000mAh portable charger being a close second XD ) and I definitely don't feel like I have to handle it with extra care anymore.
The Kracken has all ports covered, along with all speaker holes.
The Kraken is pretty much like the old otterboxes with covered the camera with a clear skin, along with pieces of fabric covering all speaker-,mic holes. The Otterbox for the DX does NOT have those, which makes it not completely dustproof.
And as for the guy complaining about the plastic Innocase coming apart on the Seido when you drop it..... It was designed that way. It spreads the impact of your clumsy drop away from the much more expensive phone, and towards the cheap replaceable case. Think of it like a crumple zone in a car. Its meant to protect the insides of the phone, not keep it pretty.
Any seen a dock that fits these cases? I know there have been some handbuilt. Seidio has usually made a dock that fits their cases. But I have yet to see this.
Sent from my DROIDX using XDA App
Hey guys i was wondering what case you would recommend. im very picky with cases since i dont like bulking my phone up but i also dont want to worry about scratches i wish phantomskinz had something. let me know please
gkallivrousis said:
Hey guys i was wondering what case you would recommend. im very picky with cases since i dont like bulking my phone up but i also dont want to worry about scratches i wish phantomskinz had something. let me know please
Click to expand...
Click to collapse
Truthfully verizons body glove case is best for non bulkyness.Very stable fits well .ect.
I like my body glove
Personally I have tried the Body Glove case and I like the Otter Box Commuter case a little better. The new Seidio Innocase Active is also a very nice case; a close second to the Otter Box.
Definitely otter box. Slim sturdy and stylish
Sent from my DROIDX using XDA App
one problem though it has to slide into my jeans. Most of these cases have rubber and dont slide
Throwing in a vote for the Body Glove case.. great fit with just enough bulk to give you that warm protected feeling
Sent from my DROIDX using XDA App
You should check out Techie Warehouse. If you go to the Covers & Skins area for the Droid X you'll find over 300 covers to choose from.
Best one I got laying around was not a Seidio, Otterbox or Trident... it was the Dual Layer Vertex Covers just google "techie warehouse vertex cover for droid x"
I quote from our product description about this product "The Motorola Droid X gets ultimate protection. A Screen Protector and two virtual walls of defense. The inner silicone core absorbs shock from bumps and drops. A hard polycarbonate exterior shell prevents cuts, scrapes, dings, and damage for the Motorola Droid X."
Let me know what you think of it.
i bought one of the 3 dollar black silicone ones off amazon. works fine for me..
gkallivrousis said:
Hey guys i was wondering what case you would recommend. im very picky with cases since i dont like bulking my phone up but i also dont want to worry about scratches i wish phantomskinz had something. let me know please
Click to expand...
Click to collapse
I have had the Otterbox, Seidio, Innocase, Verizon, Kragen, but I didnt really like any of them. Iphone cases are so much more refined compared to these.
The Otterbox Seidio, and Kragen cases are too bulky, the Innocase looks good but broke on me, and the Verizon Kickstand Case was too cheaply made.
There is a guy from another forum thats making a phone case. It looks great but its not for sale yet, I am personally looking forward to it because he claims its easy to open and has a bunch of other features. It looks absolutely beautiful, so lets hope he can pull this off.
Right now Im using a cheap Ebay Silicone case, its not great either but it was only $2 and thats value for money. I also got a Smartphone Coaster, its a cheap bit of tin but it does the job for now.
gkallivrousis said:
Hey guys i was wondering what case you would recommend. im very picky with cases since i dont like bulking my phone up but i also dont want to worry about scratches i wish phantomskinz had something. let me know please
Click to expand...
Click to collapse
Phantomskinz does have skins for the droid X.. Check the site again!
+1 For the Body Glove
I really enjoy my Body Glove, Although I've managed to wear out the snap on the lower left side by removing the case over time to do a battery pull and it no longer holds securely.
I have a Green Trident Kraken on order, due to arrive today actually assuming UPS will brave the icy roads, Good reviews on protection but they all admit to the sacrifice of sleekness.
The pliable verizon silicone case is nice and it fits with extended battery-Motorola and cover. You can find them for $10 online or eBay.
Check ebay item #250759993717
I bought a Sedieo Innocase Surface back in December it cracked in half in January. They are really nice looking, but if you ever have to do a battery pull or if you want to use your car dock, forget about getting it out of the damn case. It fits way to tight. So I am back to the ole Silicone case, which works fine, but sucks if you put it in your pocket, cause it sticks to cloth / jean material.
I'm on my 2nd Body Glove case.
Likes: Belt clip, rubber texture, light weight
Dislikes: Rubber texture deteriorates, weak tabs will not survive impact.
It has kept my DX from scratches but the tabs that snap it together break too easily. First was replaced under warranty. I think I will kick out the $ for an Otter.
OnMy2ndGP said:
I'm on my 2nd Body Glove case.
Likes: Belt clip, rubber texture, light weight
Dislikes: Rubber texture deteriorates, weak tabs will not survive impact.
It has kept my DX from scratches but the tabs that snap it together break too easily. First was replaced under warranty. I think I will kick out the $ for an Otter.
Click to expand...
Click to collapse
Those cases with tabs that snap together aren't meant to be taken apart, after 4 or 5 times they will break. I created a case that opens easily, has no tiny tabs to break and has a multitude of other features.
I've also taken great care to make sure that the case is placed further away from the screen and buttons making it easy to touch the screen and press the buttons on the bottom.
There's space for the OEM extended battery, an extra micro SD card, and even an ID or credit card.
The case also functions as a stand and car mount, my case allows you to watch movies, make movies, capture photos, and use your phones GPS in your car with ease. These features not only work with the Motorola Droid X but with other cases, other phones, and even some other electronic devices such as digital cameras.
The case isn't any more expensive then other high quality cases either. Its 20 bucks and made from the same high strength plastic as other high end cases, so basically if your in the market for a case and other accessories you can pay for just the case and get the rest for free essentially.
If you think this case must be huge and weigh a lot you'd be surprised, its really a simple concept, its almost like a normal cellphone case but we've changed a the design a bit to allow it to function as an adjustable stand.
I can't post links yet so you'll have to google "Jawcase" to find more info, pics, and videos.
I like the Jawcase concept. Alot. I pledged. And good luck with getting your project off the ground Heather. Hope it gets funded.
I've gone through 3 body gloves now with my 4th's clips are broken yet again....
I think its a bit ridiculous that I cant take my phone case off because the clips can't stand it.
I need to find a new case, and I'm thinking of just going with one of the hard-ish silicone cases. The body glove looks great when you buy it, but the rubber wears away like no tomorrow and the clips are destroyed after a couple battery pulls. I had one for my enV touch and it lasted the entire lifespan of the phone with minor tears and such. My droid x's can't last anymore than maybe a month. Don't get me wrong, the body gloves are wonderful, but I'm clearly not having a good experience with it or maybe I'm not handling it properly
+1 for the body glove case. I havent had any issues with the tabs, but i always open it at the bottom with a coin.
Riddlin said:
I bought a Sedieo Innocase Surface back in December it cracked in half in January. They are really nice looking, but if you ever have to do a battery pull or if you want to use your car dock, forget about getting it out of the damn case. It fits way to tight. So I am back to the ole Silicone case, which works fine, but sucks if you put it in your pocket, cause it sticks to cloth / jean material.
Click to expand...
Click to collapse
Shoot...I was pretty much sold on the Innocase Surface case, was gonna order one in the next few days. I've tried the cheap TPU case, the cheap 2-piece snap together case, maybe I'll try the Verizon silicon one instead of the Innocase.
i know the TPU case with the plastic back covers it and the plastic hard snap-on cases cover it
from what i've seen these are the only cases that wrap around enough to completely cover the bezel, but maybe you guys would know of other that do, preferable tpu. i switch out batteries all the time so the snap on cases arent the best since they are tough to remove.
thanks
TPU?
You didn't really ask a question...
semantics...... im looking for a case that covers the chrome-bezel, for those who didnt understand the topic
anywho...tpu is that high grade plastic that feels rubbery, like the argyle cases daydeal sells
Otterbox commuter case does. Best case i have bought for a phone, feels great in the hand and looks very good. Wont ever go without it
Sent from my SGH-T959 using XDA App
How much bigger does the Otterbox case make the phone? The other Otterboxes I've seen (for other devices) were a significant addition to the thickness.
Otterboxes and cyclops cases make the phone feel FAT. REALLY fat....it completely kills a device that was designed to be thin. Personally, I'd recoomend you this:
http://forum.xda-developers.com/showthread.php?t=772826
Covers the bezel, does not make the phone look fat. Looks great from the back also. Rubbery only on the sides. Don't get the new edition as it's a poor fit, get the old edition which doesn't have cutouts for the buttons. Then, if you have problems with the power button, put a little piece of paper on it and it will feel great to press.
Also, the case makes the phone nearly indestructable. I've dropped it 7ft on concrete. Case got a concrete scratch....phone was perfect.
Thanks for the suggestion! I was considering either that one or the one mentioned in the second post of this thread: http://forum.xda-developers.com/showthread.php?t=1098214
I just don't want anything that's too big and fat (don't need my phone to look like me. LOL)
That one from the post is nice except it doesn't cover the bezel on the top and bottom. That's pretty major for me, otherwise it's a great case. Similar to the mesh ones. The one I linked you covers everything and is thin.
i had that one, but the glue started coming off where the plastic is attached to the rubber. i would like one thats all rubber because the plastic back is slippery, there doesn't seem to be any other option though to cover that bezel
superglue. I did it to mine and hasn't moved since.
First of all, i would like to thank the people over at Trident (www.tridentcase.com) for sending this case out to me.
Packaging - The box is pretty simple. Shows the product and the different colors it comes in. Black, Red, Pink, Green, and Blue. i will be showing off the black model. Inside the box comes a screen protector kit, which includes the screen protector, microfiber cloth and a applicator/squeegee card. The case retails for $49.95.
Case - The Kraken AMS case is a heady duty 3-Layer case which features a shock absorbing silicone, a polycarbonate plastic shell, rubber dust covers over the microphone and speaker, rubber covers over ports (charger and headset), and holster. The silicone part, or Perseus can be used as a stand alone case on days that you don’t need maximum protection, but will still give u good drop and scratch protection. The two polycarbonate shells cover the silicone to make the case durable. The case has a nice lip around the screen for a lay on table design. One accessory that the case comes with is a really durable metal kickstand. They also have other Kraken accessories which make the case more usable in everyday life. such as an AMS Bike Clip, AMS Tripod Mount, AMS Headphone Organizer, AMS Seatbelt Clip, and AMS Windshield Mount.
Thoughts - My thought on the case are it is made of very high grade materials. everything fits. cutouts are precise. I’ve only had the case for a few hours and i love it. the silicone is way much better than the otterbox defender. it feels of quality and doesn't attract lint. the volume and power buttons feel better than the naked buttons to me. the kickstand is SOLID and does its job great. the holster is just as heavy duty as the case and rotates so you can wear it comfortably. i will update the in a few days to give more opinions...
Pics - I will have pics of the phone with the case tomorrow, as my nexus is my only camera at the moment.
http://imm.io/iJnX
http://imm.io/iJoQ
http://imm.io/iJpn
http://imm.io/iJpw
http://imm.io/iJpJ
http://imm.io/iJpR
http://imm.io/iJqe
http://imm.io/iJqn
Conclusion - I think the case is well worth the $50 you are paying. you are getting a heavy duty case that can be used as a lightweight case also that provides an ample amount of protection. I would definitely recommend this case to anyone who is looking for an overall great case that will add bulk to your device.
if u feel i left something out or want to ask a question. go ahead. thanks.
But will it blend? http://www.youtube.com/watch?v=lAl28d6tbko&feature=youtube_gdata_player
Seriosly though, If this fit a mugen 4000 battery id buy it. But so many premium cases none of them expandable
Sent from my Galaxy Nexus using Tapatalk
what do u mean by blend.?
rlamontjr said:
what do u mean by blend.?
Click to expand...
Click to collapse
Never seen the "Will It Blend?" videos?
http://www.youtube.com/user/Blendtec?feature=watch
Can't wait to see some pictures of the phone inside the case.
Some questions...
First, how do the two plastic pieces (the front and back) fit together?
On my otterbox defender, they just snap together with some tiny little clips and after about two drops 3 out of 4 clips are already broken so the only thing holding them together is the silicone cover that goes on the outside. I'm hoping the kraken is a lot more rugged in that aspect... The otterbox is great at protecting the phone but the case itself is already trashed after a few drops which isn't cool.
Second, how bulky is the kraken? It looks bulkier than the otterbox defender, especially on the sides since it looks like it has a ridge sticking out from either side of the screen. Does it feel good in the hand? My defender definitely makes the phone about 30% thicker which makes it less comfortable to hold but I've gotten used to it. Don't know how I'd feel about the ridges on the Kraken however.
Anyway thanks for the review.
Sent from my Galaxy Nexus using xda premium
hmmmm. might just scratch, but not blend.
the two plastic pieces fit together nice and tight. the top and bottom are snap together. but the sides are actually placed in slots, it can be slight difficult to remove if u don't have nails. but i see that as a good thing. the Kraken would take some time to show wear and tear.
it may b just a tad bit bulkier, but the grip is a for sure thing. the poly carbonate is not glossy but isn't matte. it's sort of in between but doesn't show finger prints. the sides have ridges for better grip as well. i actually thought the defender felt great in hand, maybe because i have small hands tho.
few more pics.
http://imm.io/iLsD
http://imm.io/iLsR
http://imm.io/iLsX
Has anyone tried one of these with the extended battery? Looking forward to pics of the phone in the case.
More Pics...
http://imm.io/iWzQ
http://imm.io/iWzZ
http://imm.io/iWAd
http://imm.io/iWAn
http://imm.io/iWAz
http://imm.io/iWAI
http://imm.io/iWAR
http://imm.io/iWAY
http://imm.io/iWBl
http://imm.io/iWBF
the case fits the GSM extended battery with no problems at all.
Does this case make it hard to press the volume and power buttons? And it seems to cover up the notification light at the bottom doesn't it?
the buttons are the best thing on the case IMO. and the notification light isnt covered.
rlamontjr said:
the buttons are the best thing on the case IMO. and the notification light isnt covered.
Click to expand...
Click to collapse
Thank you! I will probably be ordering the phone, this case and the 2000 mAh battery all today then
Ngo93 said:
Thank you! I will probably be ordering the phone, this case and the 2000 mAh battery all today then
Click to expand...
Click to collapse
HI, just wondering if you wound up getting the 2000mah battery afterall and if so, how well it fits.
if it fits 100 percent with extended battery im a get one to
i recently bought one it appears the notification light is 40% block.. i'm using the standard battery gsm version could that be the reason i wonder
I have the same case with the extended battery (Sprint) and everything fits perfectly. The notification light is about 50% blocked but I dont use it anyways so it did not bother me much. The notification bar is easy to pull down with no interference with the top of the case like with the otterbox. The case can take a beating I have drop tested survived a 12ft drop. Even though it adds bulk because it is hard polycarbonate on the outside it makes it really easy to get in and out of pockets even with tighter fitting jeans.
Also if you have a Costco or Sams Club near by you can pick up the case for $30 instead of $50.
Seidio convert is better.. options for all gnex models and batteries
Sent from my Full AOSP on Toro-VZW using xda app-developers app
After a couple of months, do you guys still recommend the Kraken?
saintpanache
saintpanache said:
After a couple of months, do you guys still recommend the Kraken?
saintpanache
Click to expand...
Click to collapse
I would recommend it if you are looking for a case that offers similar or even more protection than the Otterbox Defender. The case adds quite a bit of bulk to your phone though so that may turn off some people.
Throughout the work week, usually switch between the Kraken, Otterbox Commuter, and the SGP leather pouch. The Kraken will be used only if I have to go out to do field work.
The Commuter is only used if I feel like I don't want to use the SGP pouch. Otherwise I end up using the SGP pouch most of the time on the slower days of work where I'm just stuck in the office.
I'm leaning toward the Kraken because I've read a couple of story about how the Otterbox defender was scratching phones.
I have a commuter right now but I need something more rugged for work and also to protect my GNex from my crazy kids
saintpanache
If that's the case, the Kraken would be a good purchase for you. My Kraken case has held up well when I drop my phone when I'm out doing field work. Very durable and well worth it!
Just wondering if there's any cases that fit this phone when it has an extended battery on.
If not, is ghost-armor coating really worth it? I need to protect the corners of my phone, since I've dropped it once without a case, and the corners are already all scratched.
just in case
I've put a extended battery and back on mine using the same silicone case. the 2 piece hard case is modified to work by cutting a square on the back of case to fit over new back. takes a little time with sharp knife but works well. hope this helps.
trofmoc said:
I've put a extended battery and back on mine using the same silicone case. the 2 piece hard case is modified to work by cutting a square on the back of case to fit over new back. takes a little time with sharp knife but works well. hope this helps.
Click to expand...
Click to collapse
What case exactly?
I just received this silicone case (a steal at $1.56 + less than a dollar shipping) and like it very much.
It does not, however, fit over the extended battery. I haven't tried altering it, but I may buy another for experimentation.
Black Protective Dual Texture Fusion Rubberized Silicone Skin Cover Case for HTC T Mobile MyTouch 4G
I too am curious which silicone case fits over the extended battery. But for now, I'm enjoying the new, grippy case along with a new, standard-sized Anker 1550 mah battery.
WHAT FITS
ant hard case will fit when the back part has square cut out with sharp knife, I just use regular silicone case and stretch it over extended battery. works well for me
I have that case, its an extremely snug fit, it wouldnt look very good...
THEindian said:
I have that case, its an extremely snug fit, it wouldnt look very good...
Click to expand...
Click to collapse
looks good is in the eye of the beholder[sic] ina holster doesnt matter and out of it looks good to me. tried to find a different case for extended batt but none available,so used a knife and satisfied.
Silicone or tpu case without the new back piece works great. Using the battery bare saved me space.
I tried looking for a case myself. Seems like I've tested them all lol. But I have yet to find one that actually fits.
The silicone looks horrendous with it and that's the one I happen to like the most