Related
Hi All!!
Would really appreciate some advice on how i go about unlocking my T-mobile MDA Compact II. Just had it back from repair, having purchased unlocked (also supplied unlocking files). Not sure if maybe software more up to date but software doesn't work now, neither does the link you have all kindly posted above! When running 'lokiwiz' batch file, lists error - transfer error.
My info is:
Rom Version 2.6.2.27WWE
Rom Date 3/9/06
Radio version 02.19.21
Protocol version 4.1.13.19
Extrom version 2.6.2.110
Please, please can anyone help me as without a phone!!! Thanks so much for your help.
Regards.
Rosco.
Have you tried the whole process according to the instruction? I dont know that which Lokiwiz you are trying but my sister have bought the pink MDA compact II from t-mobile in october and I have successfully unlocked my device.
Try this one but please go point to point.
Sidd
Cheers Sidd!!!
Hey thanks so much Sidd!!!
After days of trying so many different files and methds of trying to get the dam thing working, finally the zip file you listed worked like a treat!!!
Can't thank you enough mate!! If you were close enough i'd buy you a drink or five!!!!
Hopefully this will help others to with the same problem!
Thanks again!!
Regards.
Rosco.
My pleasure, enjoy
perfect thx m8.
Unlock T-Mobile MDA Compact II
I am looking at the notepad file Lokiwiz03 and it says
"2 - Copy EnableRapi.cab to your Wizard"
Which wizard and where do I find it? (Sorry if I sound thick but have never done this before)
Thanks!
I am out of my computer, hopefully I will reply on this problem tomorrow.
bill Copy EnableRapi.cab to your mda compact 2
then klick on it then start the bat file on your pc
after getting a dos windows on your pc
look for a code between the lines
copy the code and use it to unlock it
that is what i did to unlock my t-mobile mda compact 2
Hello Sidd,
I did download the ZIP folder, But I can't unziped...
and and getting following massage "File skipped unknown Compression method"
Please help me out....
Thanks
I did have Zipped this file on WinZip 10, download the attached file, now I have zipped it on a normal compression
GoodLuck
Sidd
not working
i tried this so many times. every time i tapped on the enablerapi.cab file, my mda compact just removes it. what am i doing wrong?
Obviously it is gonna dissappear after the installation. Please follow the steps 1 by 1.
Suggestion 01
1 - Connect your device with ur PC and make sure activeSync recognise it.
2 - Unzip lokiwiz.zip to somewhere in your computer
3 - Copy EnableRapi.cab to your Wizard
4 - Execute the EnableRapi.cab in your phone. Wait for it to finish
5 - Execute lokiwiz.bat and follow the instructions on your screen...
Suggestion 02
For those of you having problems with lockiwiz 3a not unlocking your phone, well i was having the same problem, but not for long because i discoverd what i was doing wrong.
when you download lokiwiz 3a you have 2 things, lockiwiz and a folder called utils, now in the folder utils you will find a file called enablerapi its about 70kb in size, copy this to your MDA vario in the my documents folder, once there run it by tapping on it in my documents on your MDA saying Ok to everything, once youve done that, then and only then try running the lockiwiz application on your main pc making sure your connected via ActiveSync and look for the SIM unlock code in the black command promt box and jot this number down, then put SIM card in thats different from the one you use and switch on, when asked for the unlock code just type in the number you have written down earlier.
GoodLuck
Sidd
hi sidd,
it did not work on my mda compact. i tried both suggestions 1 and 2. but i didn't get any unlock code when i ran lokiwiz. i will give it another try one of these days. maybe i need to remove my tmobile simcard first? anyway.... thanks a lot. and happy new year.
Well I have downloaded the whole solution from this same forum and applied on my sister's Mda and it did work.
Happy New Year to you all as well
Sidd
jadey said:
hi sidd,
it did not work on my mda compact. i tried both suggestions 1 and 2. but i didn't get any unlock code when i ran lokiwiz. i will give it another try one of these days. maybe i need to remove my tmobile simcard first? anyway.... thanks a lot. and happy new year.
Click to expand...
Click to collapse
Copy and paste the output from the unlocking program here. Anyway, if it doesn't give you a code, probably your phone is already unlocked.
Thanks Sid
Hello Sidd,
Thank you so much I be able to unlock mu MDA...
ROMI
this program is not workin my Qtek s110..
error report : Cert_SPCS not a windows CE aplication
and error Lokowiz
pls help me
martindimitrof said:
this program is not workin my Qtek s110..
Click to expand...
Click to collapse
QTek s110 is a Magician and NOT a Charmer. Try the Magician section and wiki. You are lucky that you are not flashing your phone or else you may have got yourself an expensive brick.
This works a treat
Thanks loads for this walkthrough m8 its flawless. Great work m8.
It works with IPL 3.x!
After many tries and misses... I tryed everything but can't unlock my charmer with IPL 3.x... BUT THIS METHOD WORKS PERFECTLY !!!!!! In 5 minutes charmer was unlocked! THANKS!!!!!!!!!!!!!!
i wonder if anyone could help me with my problem!
i can't upgrade / Install RADIO ROM (any) in my UNIVERSAL. what happens is that it doesn't starts and when rebooting it says NO GSM where the versions are mentioned in red.
my universal goes in the bootloader mode properly and the update or RADIO ROM Starts; but it stays on 0% and doesn't move ahead. after a while and error comes ERROR 114. Can't update RADIO ROM.
This all happened when i was trying to downgrade my radio rom from 1.14.01 to 1.13.00 this morning and it stopped at 66% with giving this messege.. cannot upgrade radio rom... since then i am unable to re-install radio rom. However i am able to install WIN CE ROM and EXT ROM but not radio ROM.
can you guys help me somehow?
farehmani.
farehmani said:
i wonder if anyone could help me with my problem!
i can't upgrade / Install RADIO ROM (any) in my UNIVERSAL. what happens is that it doesn't starts and when rebooting it says NO GSM where the versions are mentioned in red.
my universal goes in the bootloader mode properly and the update or RADIO ROM Starts; but it stays on 0% and doesn't move ahead. after a while and error comes ERROR 114. Can't update RADIO ROM.
This all happened when i was trying to downgrade my radio rom from 1.14.01 to 1.13.00 this morning and it stopped at 66% with giving this messege.. cannot upgrade radio rom... since then i am unable to re-install radio rom. However i am able to install WIN CE ROM and EXT ROM but not radio ROM.
can you guys help me somehow?
farehmani.
Click to expand...
Click to collapse
Radio rom upgrades are definately more reliable with the original cable. I have read somewhere in these forum that the mode of radio ROM upgrade is different from other ROMs (CE and Ext rom) this is the reason why it takes more time than the CE rom although the later is much larger in size. I suggest you try again if possible on a different PC. For some strange reason I can upgrade my Radio ROM only in my office PC.
d_ranade said:
Radio rom upgrades are definately more reliable with the original cable. I have read somewhere in these forum that the mode of radio ROM upgrade is different from other ROMs (CE and Ext rom) this is the reason why it takes more time than the CE rom although the later is much larger in size. I suggest you try again if possible on a different PC. For some strange reason I can upgrade my Radio ROM only in my office PC.
Click to expand...
Click to collapse
i have tried on 3 different computers but it doesn't work. also with original cable too. it is definately a software problem as no physical damage was made to my device. there must be something that fixes it.
still while upgrading Error 114. (UNABLE TO UPDATE RADIO ROM)
i wish i could find any help with this...
Farehmani
farehmani said:
i have tried on 3 different computers but it doesn't work. also with original cable too. it is definately a software problem as no physical damage was made to my device. there must be something that fixes it.
still while upgrading Error 114. (UNABLE TO UPDATE RADIO ROM)
i wish i could find any help with this...
Farehmani
Click to expand...
Click to collapse
Have you tried putting the unit into Bootloader before you start the upgrade - I find that more reliable?
apd said:
Have you tried putting the unit into Bootloader before you start the upgrade - I find that more reliable?
Click to expand...
Click to collapse
I too find that upgrade in Bootloader is more reliable.
To let you into a little secret.. I ALWAYS flash now in Bootloader mode.. I have only had a couple of "bad flashes" but all of them were direct from a running OS...
I have sent you a pm, that should solve your issue. Please check your pm's...
Take care,
-Jwrightmcps
farehmani said:
i wonder if anyone could help me with my problem!
i can't upgrade / Install RADIO ROM (any) in my UNIVERSAL. what happens is that it doesn't starts and when rebooting it says NO GSM where the versions are mentioned in red.
my universal goes in the bootloader mode properly and the update or RADIO ROM Starts; but it stays on 0% and doesn't move ahead. after a while and error comes ERROR 114. Can't update RADIO ROM.
This all happened when i was trying to downgrade my radio rom from 1.14.01 to 1.13.00 this morning and it stopped at 66% with giving this messege.. cannot upgrade radio rom... since then i am unable to re-install radio rom. However i am able to install WIN CE ROM and EXT ROM but not radio ROM.
can you guys help me somehow?
farehmani.
Click to expand...
Click to collapse
apd said:
Have you tried putting the unit into Bootloader before you start the upgrade - I find that more reliable?
Click to expand...
Click to collapse
yes... i have never tried to flash anything while being in the os. always switch my device to the bootloader first. I have BootLoader 1.01
Please help!!
apd said:
Have you tried putting the unit into Bootloader before you start the upgrade - I find that more reliable?
Click to expand...
Click to collapse
How to put the PPC in Bootloader (Qtek900)?
myname70 said:
How to put the PPC in Bootloader (Qtek900)?
Click to expand...
Click to collapse
Read the wiki - the answers are in there.
apd said:
Read the wiki - the answers are in there.
Click to expand...
Click to collapse
the problem is still there....
i have tried circumvent bootloader password too... and getting error like Win32 Error, Cannot read from the specified device when HEX of password is placed on the memory field of WinDbg.
Tried Another solution for NO GSM but no luck !!
okay here goes; your quoted link had point#5 for no GSM when booting so i followed it as given below.
Pls. see the comments in (( )) for how i conduct these steps and what value is returned.
[[[[--->
Problem 5: Device shows NO GSM when booting (( I'm having this problem ))
1) The radio stack is screwed, you don't get GSM signal and the phone says unknown SIM status
2) Device won't start after trying to unlock it with HTC Universal Unlocker (HTC_Uni_SIM_Unlock_v1)
Here is how to fix it:
1)Disable activesync on your computer by right click on activesync icon -> connection settings -> uncheck "allow USB connections". (( Done! ))
2)Put your Hermes (( Universal )) in bootloader mode
3) Connect device to computer using USB cable. (( Done with Original Cable ))
4) Open mtty.exe and select USB port, then connect.
Hit enter twice, you will see the "USB>" prompt. (( Okay but i usually get the USB> prompt with single hit of Enter ))
Type the following commands (do not copy paste!!!) (( I type them ))
USB> password 0000000000000000 (( Returns: HTCSPass1.CMˆËHTCEUSB> ))
USB> set 1e 1 (( Returns: USB> ))
USB> erase a0040000 c80000 (( Returns: HTCST ÚÈÒHTCEUSB> ))
USB> erase a0cc0000 c80000 ((Returns: HTCST ÚÈÒHTCEUSB> ))
USB> erase a1940000 640000 (( Returns: HTCST ÚÈÒHTCEUSB> ))
USB> set 1e 0 ((Returns: USB> ))
(( Then i close the window of MTTY and proceed to step 5 ))
5) Reset your phone and put it back in bootloader mode (( Here i take my Universal off the usb cable, soft reset it with the stylus and without letting it to boot i switch it into the bootloader mode again and get "Serial & v1.01" on the screen's header and footer ))
6) If your bootloader version is different than 1.04 then Flash Bootloader version 1.04 (( I simply ignore this step as this could be for Hermes users only not for UNIVERSAL Users - Pls. correct me if i'm wrong ))
7) Flash the patched radio used to simunlock the Hermes (( I do it with HTC_Uni_Unlock_v1 it has radio version 0.00.00 BUT still it gets stuck at 0% and after sometime gives the same error 114. Cannot Update Radio ROM ))
Your phone should be alive again (( Its Not ))
<---]]]]
i don't think i'm doing anything wrong here... just the step 5 of bootLoader Update to 1.04...
what comes in your mind ???
i'm desperately missing my pda. its begun to hurt now... please help me rescue my baybee....
farehmani
farehmani said:
i don't think i'm doing anything wrong here... just the step 5 of bootLoader Update to 1.04...
what comes in your mind ???
i'm desperately missing my pda. its begun to hurt now... please help me rescue my baybee....
farehmani
Click to expand...
Click to collapse
Don't worry, mate, you're almost there...
Don't worry about the bootloader version, that is just for the Hermes (Universal will be 1.01 or under for G3, 2.1 for G4). If it's under 1.01 it would be worth upgrading to 1.01 which you can find on the ftp.
SpyderTracks said:
Don't worry, mate, you're almost there...
Don't worry about the bootloader version, that is just for the Hermes (Universal will be 1.01 or under for G3, 2.1 for G4). If it's under 1.01 it would be worth upgrading to 1.01 which you can find on the ftp.
Click to expand...
Click to collapse
glad to know about my being almost there... still i wonder whats keeping me away from retaining my device...
i have already got BootLoader 1.01...
what other method should i apply to get it working again?????
I have the same problem, but not in Universal, but apache, jwright help me.
i have the same problem can smeone help
Try this
"Type "task 28 55aa" and hit enter.
This will restore the DOC partition to its original layout and delete all data
including the ROM!
Once finished you must use the "Original OEM ROM" (i.e. JASJAR WWE
1.30.76) that is made for your device and update with it (CE,Extended
and Radio).
Also if your device bootloader version is lower than "v 1.01" you should
update that first (before installing the OEM ROM, but NOT before "Task
28 55aa").
After this is complete you may then use your device again.
Please let me know how things work out for you...
Take care,
-Jwrightmcps"
It solve me...
i am having the same problem with exec it shows me no gsm and when i go to the device information it does not shows the radio ver and my phone imei is 0 can someoe please tell me how do i solve the problem i had read this tread but not understand it can someone please explane me how do i solve the problem
shedragon said:
"Type "task 28 55aa" and hit enter.
This will restore the DOC partition to its original layout and delete all data
including the ROM!
Once finished you must use the "Original OEM ROM" (i.e. JASJAR WWE
1.30.76) that is made for your device and update with it (CE,Extended
and Radio).
Also if your device bootloader version is lower than "v 1.01" you should
update that first (before installing the OEM ROM, but NOT before "Task
28 55aa").
After this is complete you may then use your device again.
Please let me know how things work out for you...
Take care,
-Jwrightmcps"
It solve me...
Click to expand...
Click to collapse
thanx for your suggestion!
i had tried this already... but the problem is beyon this...
i discussed with pof and he said that somehow i screwed up with the qualcomm chip where the radio bootload resides. so it needs replacement.
anyways... thanx budd... i appreciate your support too...
regards...
my hermes having this problem also ((
Thanks to the entire community for their valuable input and Bepe for his lovely clean rom.
Right, lets begin, heres how to get WM6 on your device with NO "Not enough memory" errors in word, tomtom or anything.
IMPORTANT! You MUST use the files I provide below and you MUST start from a ROM with an Extended Rom. If you have no extended rom then you will get the memory errors.
Start with a rom with an Ext Rom. Here is a link to the T-Mobile UK MDA Compact III rom here you go: http://rapidshare.com/files/17854890/art_tmouk_11311001_024990_wwe_ship.exe
Hard reset your device (Hold the 2 softkeys, press the reset hole and follow the screens)
Plug it into your PC. Wait on the config screen, dont proceed with the alignment, setup activesync as a Guest.
Unlock your CID using USPL found here: http://forum.xda-developers.com/showthread.php?t=311403
Download Bepes rom here: http://www.ramonshare.com/files/index.php?share=4&path=ROMS/HTC Artemis/WM6-By-Bepe/ARTE_WWE_WM6.rar
Download the update util here: ftp://xda:[email protected]/Uploads/Artemis/arte.zip
Extract the util and Bepes rom to any folder
Rename OS.nb to windows.nb
Edit the line which says pdocwrite.exe windows.nb 0 0x3900000 and change it to pdocwrite.exe windows.nb 0 0x3500000
Run UpgradeRom.bat.
HardReset when done.
When it says its going to customize in 3 seconds PRESS THE RESET BUTTON.
Thats it, step by step, but in short for those who know what there doing.
Start with a ROM with and Ext Rom.
Unlock using USPL
Upgrade to Bepes rom using the UpgradeRom.bat file as the EXE seems to wipe the Ext Rom and cause errors.
Hah you got it. That was exactly how I updated my Artemis minus the USPL part which did not exist then, and I have no Out of memory errors.
Although if that's the solution, what actually was the problem? Something to do with EXT ROMS?
"Edit the line which says pdocwrite.exe windows.nb 0 0x3900000 and change it to pdocwrite.exe windows.nb 0 0x3500000"
where do you do this??
thanks for your hard word and determination. your a life saver!!
jamesredfern said:
"Edit the line which says pdocwrite.exe windows.nb 0 0x3900000 and change it to pdocwrite.exe windows.nb 0 0x3500000"
where do you do this??
thanks for your hard word and determination. your a life saver!!
Click to expand...
Click to collapse
Open upgradeROM.bat with windows notepad, you'll see the line there.
Heeey great work dannyoneill!! You've cracked it and all in one day fantastic.
Hmmm...shall I go ahead with this now or wait and hope Tom implements this solution and keeps that dreaded ext rom in his new release :-S ??
Well it looks like the rom updates are the OS only and DONT wipe out the Ext Rom. But when you run it using the packaged, niced and easy to use EXE versions they wipe the ext rom.
Thank you, dannyoneill, thank you. This really seems to work.
That was just perfect, thx. I did that way several times and it works just fine.
Sorry guys for this noob question, I've never upgraded before but now I'm confident enough to give it a try.
From where do I run the UpgradeROM.bat: from the ActiveSync screen or from the bootloader screen?
Thanks in advance.
Connect your device. Perform a hard reset and just before the alignment page plug it into your PC and cancel the partnership question.
@all,
no luck upto now on my cid-unlocked hero, here. gives me "error:
IT write disk-An established connection was aborted by the software in your host machine".
any ideas here?
greetz
Did you edit the BAT file and change the line to read whats in the instructions? If you didnt understnad that step and skipped it thats why.
The update would be sucessful and you just have to hard reset.
Dont forget, if you flash it back to any original rom, even if you previously unlocked it then it will be locked again.
thanx,
didnt think about the possibility it could be locked again! naturally, i needed to reflash an orig rom, as at first i was running a pdamobiz customized rom- update to wm6 didnt work here!
so, i am off to unlocking it again! rest was all considered, i.e. changing upgraderom.bat!
thanx
P.S.: I am up and running now. simply used my "old" imei-check unlocker again!
Is there any way to do this method with the black&blue rom?
the rom in the black&blue finishes with .nbh, and the bepe one finishes with .bn.
Please help...
P.S. I love that rom, I use it with omapclock to 264 and everything just shows up instantly.
GREAT JOB!!!!
I dont think so, the black and blue uses the RomUpgrade.exe method which seems to wipe the Ext Rom as part of the upgrade. The rom then only contains the OS partition not the Ext rom. As its based on Bepes the rom ISNT configured to work without an EXT rom it just doesnt work. Also word is broken and needs aditional registry entrys, Excel also has some issues.
My advice is to stick to Bepes rom, its clean for starters and just add on the bits you want. These can be found in the wizard forums so you get the bits you want. Im testing at the moment as most of the addons seem to slow things down.
I tried this topic's howto, but was unable to perform the first part of flashing the UK tmobile stock rom becouse it would error at 3% saying 244 unknown device id. I got a dutch mda compact iii and had b&bv2 installed with the mem problem. I wanted to have bebe's rom on my device becouse it's clean ... i like clean tought would be nice to have it running flawless .... guess what it does! Bit weird couse i failed the howto and many other things. Here is wat i did, what din't work and what did work. Maby there is some logic in it.
At the beginning:
[1] dutch t-mobile wm5 stock
[2] fixed drivers (running vista)
[3] flashed uspl
[4] flashed b&bv2
[5] used it for a while with errors and word problem
[6] wanted bebe's clean wwe and noticed this thread
[7] flashed uspl
[8] tried uk stock firm like 3 times (few resets between etc), failed all error 244
[9] continued using art tool with the address edit from this howto to flash bebe's, it did but my device wasn't able to boot past tmobile screen/boot
[10] reflashed b&bv2, boots again and with mem errors
[11] flashed b&bv2 with art tool with address edit
[12] install hang a bit, device booted no freaking idea if the flash actually worked, mem errors still there
[13] gave up the idea of having a error less os running
[14] fetched the "exe" install of bebe
[15] flashed uspl
[15] flashed exe version of bebe's
[16] error less wm6, working office, haven't found 1 problem.
So now i have bebe running without errors, tomtom installed my fav spd apps and played around with word, all fine. Very happy and rocking! But i wonder how ? since i suppose to have a screwed extrom....
You proberbly couldnt flash the original rom as you may have to unlock your device. Im planning on making a n00bs update package as I know it can be daunting sometimes.
Anyone know of a generic update with an ext rom that I can include in the package?
Works 100%. Superb! Thanks, matey.... now i just need to find a nice HTC touch black style skin...
check the Universal WM6 forums, they have the skin to download there. Not a big fan myself.
underzone said:
Works 100%. Superb! Thanks, matey.... now i just need to find a nice HTC touch black style skin...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=311225
All the stuff is here. You can just cherry pick what you want.
Cheers
Matt
Hi!
I was using Newplow's WM6 038 ROM with my N560.
Yesterday I tried to write another ROM(WM6 038 with 8MB pagepool) but during update got an error.. It said it just failed.
Now my N560 is stuck on booting screen(people climbing mountain..)
I tried Warm, Cold, Hard reset but with no luck.
Even the power button doesn't work so I had to remove battery. When I insert battery it powers on by itself.
I can enter bootloader screen by pushing power+record button so I tried to copy rom image file to SD card but it doesn't work.
I tried two ROMs(OS_213U.nbf from Original WM5 ROM and Newplow's) and 3 SD Cards(2GB SD, 1GB MicroSD with Adopter, 16GB SDHC)
Is there any recovery tutorial in bootloader mode?
Help me please!
Sorry for my English.
Have you tried flashing a ROM through the computer rather than the memory card? Try going into bootloader and flashing that way rather than the card.
The pagepool ROM is meant for N560s that have been upgraded to 128Mb RAM... have you upgraded the internal RAM to 128Mb? If you have not, then this may have caused your problem.
I had this problem when flashing to 038 normal RAM (from 035). A hard reset reset to the normal start screen, but nothing worked. However, trying a new burn with the Loox flash tool restarted the process and it worked. I found the cure was to make sure you hard reset the N560 before doing a burn. It appears to be that you have to do this to release enough RAM for the burn program to reside and for "working" storage. You may not have done this.
I suggest you try simply re-running the flashtool with SD/SDHC cards removed, battery in place, on the cradle via your PC, even though it appears stuck. The signals coming from the USB link may wake up the bootloader routine in the N560?
Solved the problem! Thanks for your comments!
I asked same question in Newplow's guestbook and the person who made pagepool rom answered. I used MTTY to revive my pda.
What I did is in below post. need translation
http://4pda.ru/forum/index.php?showtopic=55274
Hi all,
I have the same problem. N560 is stick on the himalaya picture. I tried to falsh from WM5 to new rom for Wm6 and after installation the pda stuked. So I did a warm reset and now only the start picture is apperaing. Problem is that battery is down now.
Can someone give more info on the process followed to revive the PDA ? I just cannont read russian (may be Jinsu77 ?)
Many thanks for support in advance
same problem here please please please someone help us
the only thing i can do is the l c:\os_213u.nbf on mtty program and nothing else happend to the machine
sorry for my english
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
It was me asking on Newplow's guestbook.
In case you're using Vista, you need some trick to be able to rom update. Read below.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
And then you need to download MTTY (I used version 1.42, got it by googling) and follow below steps.
(used google translation from 4pda.ru)
------------------------------------------------------------
For rom update without ActiveSync.
1) take this set of extract, copy it to the folder with the firmware.
2) copy the file os_213u.nbf example in C: \
3) You press the button Recorder + food and poke in the hole reset (Recorder button and hold until you eat dolphins)
4) plug the device to a PC, the Task Manager, shooting process - wcescomm.exe
5) Run mtty, choose Port: USB, connect.
6) If mtty caused an error and shut down, simply restart mtty, if not typed commands, then repeat the procedure with paragraph 3.
7) in mtty command, enter: (first letter in kommande - a little l l от слова from the word L L oad)
> l l c:\os_213u.nbf c: \ os_213u.nbf
Since the end of the process will be an inscription about the error, remove the device from the PC.
9) Run rom update, zhmete "next", until you see dolphins.
10), plug the device to a PC and program.
---------------------------------------------------------------
Hope this helps you all
in advance sorry for my english
I am doing all the instructions carefully and the mtty show this
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,1A0F023Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
the pda shos the dolphins and the full blue bar
after without change anything i run the PocketLOOX5xxFlashTool that i have in the same folder with the :
EnterBootLoader.exe
OS_213U.nbf (originally rom)
RUUServer.dll
RUU.dll
and the only thing i can see is that the PocketLOOX5xxFlashTool is trying to find the pda without any luck
also the pda is stucked in the same screen with the dolphins and the blue bar
do you see any mistake in this procedure
Helppp!!! please
tuluba said:
Helppp!!! please
Click to expand...
Click to collapse
have you closed EVERY process of activesync before proceding with mtty?
I close the wcescomm.exe and the rapimgr.exe is there anything else?
The pocket LOOX 5xx FlashTool cant connect with the N560 and at the and says that Error"The language in this Flash Image update (ENGLISH) differs from that on your device()!" and i have always english rom exept maybe from the last rom "the killer" with the 128MB rom that i dont know if it is an english or something else because the device never opens to see
After flashing in MTTY(don't care about error messages), you need to unplug your n560 from PC. And then proceed romupdate until you see the dolphin picture. Now you plug n560 to PC and cilck next and wait for a while.. Hope it works!
I change the language of the rom and it works
thank very much all of you
At all they have Probs with flash from SD Card: only use a Card with 512MB! I think a Card greater then can't read by the Bootloader....
hey.
i am compeletly new here. I have the same with my n560. I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP
if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
ChrisDo said:
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
Click to expand...
Click to collapse
You can usually get back to the boot loader if you do a hard reset. I am sure you know how, if not you will find it in the FSC CDROM manual that came with the device. Let us know if this works? I have got stuck at this point too, so I know it works..... hopefully!
Hi friends,
I recently purchased an unlocked HTC Artemis P3300 which has WM6 on it, I tried to flash WM6.1 but in vain, I tried the USPL and everytime it reaches the step where it's updating the image it gives me an error 270 file corrupt.
And I have tried to install Manila 2 TouchFlo on my WM6, but it seems to run out of RAM and the whole phone becomes very slow, if anyone has an idea about this, I'd be more than grateful.
I also have a 4GB SDHC card and I have tried with and without it and I still have the same issue.
Cheers,
theorthodontist said:
Hi friends,
I recently purchased an unlocked HTC Artemis P3300 which has WM6 on it, I tried to flash WM6.1 but in vain, I tried the USPL and everytime it reaches the step where it's updating the image it gives me an error 270 file corrupt.
And I have tried to install Manila 2 TouchFlo on my WM6, but it seems to run out of RAM and the whole phone becomes very slow, if anyone has an idea about this, I'd be more than grateful.
Cheers,
Click to expand...
Click to collapse
Hi m8
i hate the same probleme 1 week looking for a solution
Artemis Touch 4.02 Full with 4 sided cube <--- i have this rom right know.... there are 2 files on it on file
STEP 1 - activesync then uspl cid unlocking
whene its finisch
STEP 2 - activesync then flash artemis touch rom
it works for me
let me know if it work for you
one thing when you have done step 1 you doesn't have take this rom you can take every rom you like
Hi Dookus,
I did actually try the USPL first and when it finishes the activesync green icon goes inactive and my phones screen is blank, so I do soft reset then when the activesync is green I do try to flash the new rom, but that's when it keeps on giving me error.
Could you give me the links to your USPL and Rom please
Thanks again,
hmmm
http://www.4shared.com/file/45478590...ified=c2945a00
this is the 1 i use you may remove you mem card
alternatively flash via sd-card flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
p.s. i only flash that way, better even reflash a new rom twice! - i even do so with radio rom!
greetz
thormdac said:
alternatively flash via sd-card flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
p.s. i only flash that way, better even reflash a new rom twice! - i even do so with radio rom!
greetz
Click to expand...
Click to collapse
I checked that one out, but it's saying at the bottom that SDHC cards are not supported and this is what I have actually, I even tried the whole process after removing the SDHC card from my phone, but I still got the same error (270) corrupt image file
...even if it might sound funny at this point, but use another computer and see if you have another usb cable as well...
greetz
thormdac said:
...even if it might sound funny at this point, but use another computer and see if you have another usb cable as well...
greetz
Click to expand...
Click to collapse
I have another computer and it's Vista, I hope it'll work with it, I'll let you know
Thanks
thormdac said:
...even if it might sound funny at this point, but use another computer and see if you have another usb cable as well...
greetz
Click to expand...
Click to collapse
SAME PROBLEM, I tried it on the other computer and it gave me exactly the same error
theorthodontist said:
Hi Dookus,
I did actually try the USPL first and when it finishes the activesync green icon goes inactive and my phones screen is blank, so I do soft reset then when the activesync is green I do try to flash the new rom, but that's when it keeps on giving me error.
Could you give me the links to your USPL and Rom please
Thanks again,
Click to expand...
Click to collapse
When your screen went blank, was that after the DOS screen finished? If so, USPL is not finished yet. RUU should automatically start and you flash the USPL (don't need activesync connected here but don't remove USB cable). Then your phone should automatically restart. Once restarted, activesync will re-establish and now you flash the new ROM.
yvrRome said:
When your screen went blank, was that after the DOS screen finished? If so, USPL is not finished yet. RUU should automatically start and you flash the USPL (don't need activesync connected here but don't remove USB cable). Then your phone should automatically restart. Once restarted, activesync will re-establish and now you flash the new ROM.
Click to expand...
Click to collapse
Yes the screen goes blank while the USPL is working then after it reaches 100% the RUU kicks in but my screen is still blank and the activesync is grey and when I continue with it it tells that there's a connection problem.
I really appreciate your help but still can't seem to figure it out, does having a, SFHC has any effect on that ??
theorthodontist said:
Yes the screen goes blank while the USPL is working then after it reaches 100% the RUU kicks in but my screen is still blank and the activesync is grey and when I continue with it it tells that there's a connection problem.
I really appreciate your help but still can't seem to figure it out, does having a, SFHC has any effect on that ??
Click to expand...
Click to collapse
Yes, you should remove your SDHC card when updating. Start again with USPL but make sure your card has been removed. When RUU kicks in after DOS window shows 100%, my screen is blank too with Activesync disconnected, just continue with RUU to flash the new USPL.
After it reboots, run the RUU for the new WM6.1 ROM.
There's pdf instructions in the USPL thread if you're still having problems.
theorthodontist said:
Hi friends,
I recently purchased an unlocked HTC Artemis P3300 which has WM6 on it, I tried to flash WM6.1 but in vain, I tried the USPL and everytime it reaches the step where it's updating the image it gives me an error 270 file corrupt.
And I have tried to install Manila 2 TouchFlo on my WM6, but it seems to run out of RAM and the whole phone becomes very slow, if anyone has an idea about this, I'd be more than grateful.
I also have a 4GB SDHC card and I have tried with and without it and I still have the same issue.
Cheers,
Click to expand...
Click to collapse
CID Unlock is the first to do....
And NO SDHC card in during flashing....
TPA said:
CID Unlock is the first to do....
And NO SDHC card in during flashing....
Click to expand...
Click to collapse
Thanks guys, I managed to flash ROMs on my Artemis, thank you for your help,
Salut