Develop Bugs

4GB Transcend miniSDHC not detected by new Dopod ROM :(

miniSDHC car is not visible in the File Explorer or on the PC wia ActiveSync. it was visible under previous WM 6 ROM which was the early, leaked version. now after installing new Dopod Asian WWE version, the card is no longer detected unfortunately, I don't have a USB card reader for HC cards, so I can't format it right now. any suggestions on the fix? anyone else seen high capacity card not being detected? thx!

dim4x4 said:
miniSDHC car is not visible in the File Explorer or on the PC wia ActiveSync. it was visible under previous WM 6 ROM which was the early, leaked version. now after installing new Dopod Asian WWE version, the card is no longer detected unfortunately, I don't have a USB card reader for HC cards, so I can't format it right now. any suggestions on the fix? anyone else seen high capacity card not being detected? thx!
Click to expand...
Click to collapse
Oh no, this is not good news. I thought that they would have sorted all of the card issues with the new rom...shame on HTC!

I tried the new ROM and I used the 4GB Tanscend MiniSD HC and it was working fine!!!!!!!!! No problems at all!

My 4GB SDHC was working fine with official rom until it bricked.
Now it's impossible to access it in any device.

my problem continues. hard reset and reinstall didn't help. looks like the problem is with the card.
anyone knows any SDHC USB card readers to format this pain in the neck? thx!

dim4x4 said:
my problem continues. hard reset and reinstall didn't help. looks like the problem is with the card.
anyone knows any SDHC USB card readers to format this pain in the neck? thx!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=306697

Storage Card slow down ;/

Hello
I`ve got problem with my SPV M650
sometimes my SD card become so slooooow , usually SR is solution
but maybe someone alse got simmilar problem ??
i`ve tried allready this cab for sd corruption ;
sorry for my bad english

Which producer? The speed of the card?capacity?

generic Kingston 1gb microsd card

try backup data , format card and copy everything again.

hmm i think i got solution ... i think it couse of S2U2 ,after uninstalling - everything works fine ;| ... strange..

mar_cin said:
hmm i think i got solution ... i think it couse of S2U2 ,after uninstalling - everything works fine ;| ... strange..
Click to expand...
Click to collapse
sorr- S2U2 what is this? =) Slide to unlock?
give me a *.cab please =)~ thx
already found it =))))

Sim card contacts

I've upgraded my P3600 to WM6 (thanks to Lasagna). With WM5 I could see all the contacts, both stored in the phone and in the SIM Card. With WM6 I can only see the contacts i the phone but not the one onthe SIM Card.
How can I find them without copying them in the phone memory?
Thanks

READ
maurosig said:
I've upgraded my P3600 to WM6 (thanks to Lasagna). With WM5 I could see all the contacts, both stored in the phone and in the SIM Card. With WM6 I can only see the contacts i the phone but not the one onthe SIM Card.
How can I find them without copying them in the phone memory?
Thanks
Click to expand...
Click to collapse
READ & SEARCH

maurosig said:
I've upgraded my P3600 to WM6 (thanks to Lasagna). With WM5 I could see all the contacts, both stored in the phone and in the SIM Card. With WM6 I can only see the contacts i the phone but not the one onthe SIM Card.
How can I find them without copying them in the phone memory?
Thanks
Click to expand...
Click to collapse
Try this app out and like he said "read n' search"

Thank you very much. The utility works fine!

hp ipaq 2190 with wm6

hello friends.. I need ur help...
From where can i get WM6 rom for my ipaq 2190 that can be flashed using an SD card cause i dont have the sync cable.... Plz also let me know the complete procedure to load the rom.....

mantej2008 said:
hello friends.. I need ur help...
From where can i get WM6 rom for my ipaq 2190 that can be flashed using an SD card cause i dont have the sync cable.... Plz also let me know the complete procedure to load the rom.....
Click to expand...
Click to collapse
look here:
http://forum.xda-developers.com/showpost.php?p=1516882&postcount=66
for sd flashing, I think is not possible until now. I didn't see anywhere something about this.

Becareful with the upgrade process, as you have to upagrade the OS in a SPECIFIC order or you will screw up the pda - also, I believe in order to flash from the SD card, you simply enter bootloader mode and insert the sd card with the rom file on it - might take more than that however... dig through the hx2000 wm6 thread and you'll find most of your answers.

HELP! micro SDCH does not work!

Hi there.
I'm having a very strange problem and could not solve it so far.
I have a T-mobile MDA III. When I wanted to install a new 4GB micro SDHC, I downloaded the patch, ran it on my MDA, rebooted, inserted the memory and it all worked perfectly.
Then I got an HTC P3300 (for spare) and wanted to do the same. Installed the patch, rebooted, inserted the memory... but the phone does not recognise it.
I than ran the "go back", rebooted, inserted the old 2GB memory but now the phone no longer recognises it.
So, the MDA works ok with 4GB memory.
P3300 does not recognise 4GB memory and after "going back" does not recognise 2GB memory.
Without memory the P3300 is pretty much useless.
Can anyone please shed some light on this, please....
Thanks.

http://forum.xda-developers.com/showthread.php?t=345038

braulio_holtz said:
http://forum.xda-developers.com/showthread.php?t=345038
Click to expand...
Click to collapse
This is precisely where I got the .cab's.
And in my MDA everything works fine.
On the P3300 the 4GB memory is not recognised.
And after installing 'back2original', no memory at all is reconised, not even the 2 GB microSD (not SDHC) that I used before.
One more detail:
on MDA I have WM6
on P3300 I have WM5
Is there something specific to WM5 to teawk about?
Thanks.

...
my advice is to try flashing to a differant rom..
with a few roms i too have not been able to access my memory card..
just flash to something else
click on my signature for Uspl 1.11.cmon
youl need that to flash roms

raving_nanza said:
my advice is to try flashing to a differant rom..
with a few roms i too have not been able to access my memory card..
just flash to something else
click on my signature for Uspl 1.11.cmon
youl need that to flash roms
Click to expand...
Click to collapse
Yeah, I fear that's the only solution.
(btw, why old 2Gb sd cannot be accessed? what happened?)
I've been looking for the official WM6 rom from HTC but it no longer is on the site. Where can I find it?

...
wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades

raving_nanza said:
wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
Click to expand...
Click to collapse
Thanks.
PS - Links to originals are broken, like a number of others.

Have you tried reading the card on the PC? See how it's partitioned and what kind of partition it is. Usually, you should use FAT.
I had this issue before (on my Polaris) and a format helped.

NeoS2007 said:
Have you tried reading the card on the PC? See how it's partitioned and what kind of partition it is. Usually, you should use FAT.
I had this issue before (on my Polaris) and a format helped.
Click to expand...
Click to collapse
The microSDHC was (is) formated FAT32 with only one partition. On the PC it worked fine.
Anyway, I flashed a ROM (could not find HTC original WM6 though...), applied the patch and now the 4Gb micro SDHC is working.
Still, I could not explain why, in the first try, the old 2Gb microSD stopped working.

I recon it's working now?

NeoS2007 said:
I recon it's working now?
Click to expand...
Click to collapse
Yep... but it was a real pain in the royal a**...