I am using O2 XDA IIs PPC 2003 SE.
Now when I insert my SD Card 2 GB, the OS does not recognize it.
(It was good before.)
I've tried with another 256 SD Card, same result.
Those SD Cards are working well with my Card Reader plugged into my PC.
Anyone could help me please?
Thanks in advance.
I'm sorry I don't know.
However.. you've come to the wrong place if you want help.. people here seem to have an aversion to actually helping people out.. don't get me wrong, there are some very talented people that call this forum 'base', but they are understandably busy.. and the other's who hang just don't answer **** unless it suits them..
You are more likely to get the answer "read the wiki" which isn't the most helpful thing in the world. Even those of us who try others to help despite our knowledge being somewhat wanting.. just in the hopes of being seen to be at least trying, aren't deemed to be worth giving an answer to.
I suggest these two forums.
http://www.ipmart-forum.com/index.php
http://www.totalpda.co.uk/forum/
You will get help there.
Try soft resetting the device, poke the stylus in the reset hole and once the device re-boots it should see the card, you will not loose information performing a soft reset - Mike
thanks guys.
Hi, I've also have a sort of problem like yours. I tried soft reset n it actually works. But sometimes my BA still can't read my SD. I've tried format my SD n even upgrade my ROM. It seems that the problem is in hardware. I don't know what to do anymore
U have probably what I also have.. a faulty SD card reader or a bad soldering (welding)...
Last night I dissambled my BA n I found out that the screws around SD card reader were loose. I've tightened them up n so far I don't have any problem with SD card. But I've still exprerienced problem with my screen keep active when my BA was pressed even though I've locked the device n power off. I don't know what to do anymore. Any suggestion?
Problem already solved.
It was because tiny plastic dirts on the SD slot.
Once I cleaned it up, it's working as before.
Thanks to you all. What a nice forum we have here.
I had similar problems with a 1GB card. Formatting it in a PC-based card reader fixed it. Remember not to select quick format.
Can I put a 4GB SD Card in the Blue Angel? Will it work?
noone85 said:
Can I put a 4GB SD Card in the Blue Angel? Will it work?
Click to expand...
Click to collapse
It will work if the card is *NOT* a SDHC card.
I found my 4 gig card on ebay, topram is the brand, and it works fine as it is a non-SDHC card.
Sdcard not reconized
HI TO ALL..
I had installed miopocket 4.0 on my VDO Dayton PNA6000-WINCE 5 but
because of problems with Garmin XT I had to uninstall but the uninstall
did not do the best for me, now my SD slot dont read any sdcard i think
its corrupted registry and i dont have access to usb active sync only
have MTP (Media Transfer Protocol) when i connect to usb(no data
transfer). How can i access my resident flash(INTERNAL MEMORY) to edit
registry,change usb mode to activesync or something else???, i think sdmemory.dll is making
load problems.
Tnx in advance!
To have access to registry use TotalCommander or SKTools
but i dont have access to system, sdslot is not functional and i cant install active sync driver just mtu in device manager..
I recently had a problem with my touchsreen, today the new screen arrived and I fixed it properly. But when I start my phone he keeps asking for the SIM card. I noticed that he won't recognize my MicroSD either.
Is there anybody familiar with the hardware connectors of the SIM card?
Thank you
Are you absolutely sure you have fitted the Micro SD and the SIM properly - it's easy to do it a little wrong..... make sure the card is slid down inside the little side rails.
That's how I managed to break my screen!
Everything is in the right place. It keeps me telling that there is nog SIM card.
Even when I only put in the Sim and nog SD card or otherwise, he doesn't recognize them.
Help me please, otherwise I need a new phone and I don't know which
yannick85 said:
Everything is in the right place. It keeps me telling that there is nog SIM card.
Even when I only put in the Sim and nog SD card or otherwise, he doesn't recognize them.
Help me please, otherwise I need a new phone and I don't know which
Click to expand...
Click to collapse
I have the same issue but not as bad as you. Only my SIM does not work. I have taken the Artemis apart countless times and this issue still exists. I believe I have a dud connection but the SD card slot works as I can access the my micro SD card without any issues.
My SIM worked until I decided to dismantle the device and change the casing!!! Big mistake!!
If anyone has had the same issue and resolved it please let me know as I've hit a dead end
Try a hard reset or update your rom.
krijger said:
Try a hard reset or update your rom.
Click to expand...
Click to collapse
Tried a Hard reset but that didn't work. Going to try a new ROM later today
Thanks for the advice
I had the same problem but after installing ArtemisSDEnhancement all seems to be fine. Hope it helps you to.
see http://forum.xda-developers.com/showthread.php?t=305531
I no longer can access the memory card of 2GB of Artemis ...
Reset ... and asks if I want to format the card to access the same
1 - If you say yes ... says it is not possible when formatting and put another card to re-install it
2 - If you say no ... and still not gain access to the same card
This card works in other equipment ...
Does anyone have any idea how to solve this ...
PS: The card and the rom are the same as the times when everything worked well
Thank you very much
TF23
and what the hell does this have to do with artemis mobile 6 thread...
go to proper section and post....do not spam THIS board
we don't have a damn mod over here so we can only sit and watch people's crap all over the place
SO PLEASE BE CAREFUL WHEN POSTING....PLEASE
sorry for flaming you...it has nothing to do with you having 2 posts but has to do with you not wanting read
I jus did a soft reset last night n it stopped working, i didn't tk it out n now it doesn't detect it. i've tried other sd card n they're working pretty nicely. i think the prob is of the encryption, i'd tht option selected in setting>encryption which restricts the use of the sd card to only one device.
can any body tell me how to remove encryption from the card keeping in da same device or any other way of reading encrypted cards in my device.
i tried my card in another phone n it says the memory card is corrupted.
plz plz plz tell me tht it ain't true, i really dun wanna lose all tht data n i dun even hv a back up
ppl plzzzzzzzzzzzzzzzzz help
Hi guys i want to know if there is a chance to secure my Mirco SD on my Arc or Android device like blackberry ?
cause in blackberry when i put security on all the new files that going to install in my SD card will be encrypted so if you put my SD card in another phone it will ask for a password and if you put it in your pc you will see encrypted files that can't be read at your computer..
so is there a chance to see something like that on Xperia Arc or Any Android device?? is there an App for that or a way to make that happen ?