Related
Hello,
I am a newbie. I have HTC - Hernes. Previously I have flashed it with Schap's 4.30 rom. Now I have tried to flash it with Pandora Naked (PN9b1_WITH_MMS_RUU). Flashing went smoothly.
After flashing I found that my phone was working but there is nothing given in the rom not even Office and games. Nothing new in Today screen compare to normal windows 6.
So I have tried to go back to schap's. But now uploader is not detacting Hard SPL.
So I have installed Hard Spl 2.30 again. But still I am not able to flash any new rom. ( I have tried Schap's, Shaminx etc)
Please help...
try sd card method... easier (and I believe safer) than usb. read wiki for instructions. Cheers....
alex8525 said:
Hello,
I am a newbie. I have HTC - Hernes. Previously I have flashed it with Schap's 4.30 rom. Now I have tried to flash it with Pandora Naked (PN9b1_WITH_MMS_RUU). Flashing went smoothly.
After flashing I found that my phone was working but there is nothing given in the rom not even Office and games. Nothing new in Today screen compare to normal windows 6.
So I have tried to go back to schap's. But now uploader is not detacting Hard SPL.
So I have installed Hard Spl 2.30 again. But still I am not able to flash any new rom. ( I have tried Schap's, Shaminx etc)
Please help...
Click to expand...
Click to collapse
Did you manually select Hard Spl. Autodetect never works for me anymore. I just select SPL 2.02/2.10 & select Hard-SPL. Then continue and all should go well.
If the ROM is a Naked (Lite) ROM, then you have to manually install the applications you want. PN9.1 is a WM6.1 Rom and most of these have issues right now. I would stick to a WM6.0 Rom until the cooks here release a WM6.1 based off of the OS ver 19209. Good luck.
Chris
id say try flashing through the sd card. youll find instrutions on the wiki.
Thanks...
I got it working...
I flashed with official 6.0 rom and then PDAviet... Its working....
Now I am scaredto flash Pandora naked
ultramag69 said:
try sd card method... easier (and I believe safer) than usb. read wiki for instructions. Cheers....[/QUOTHow
How to do it?
Click to expand...
Click to collapse
Ok, information is all over the forum...
make sure you have upgraded to Hard SPL ver7. go to upgrading part of forum. Its at the top of the first page always, you cant miss it, download from there. If you want to upgrade spl with sd card go to page 116.
download rom. should have 2 files ruu_wrapper.exe and RUU_signed.nbh. copy RUU_signed.nbh onto a fat32 formatted sd card. rename to "HERMIMG.NBH" and put back in phone. Put hermes into bootloader, push and hold power button, OK button above flywheel and push stylus into reset hole at bottom of phone. hold all these until phone boots into tricolour screen, AKA. bootloader. It will detect the upgrade and start the upgrade process. follow the prompts.
Make sure you have more than 50% battery power for safety. I've reflashed with 30% but I dont recommend it. You cant put on power and flash at the same time.
Hope that helps... Cheers....
alex8525 said:
Thanks...
I got it working...
I flashed with official 6.0 rom and then PDAviet... Its working....
Now I am scaredto flash Pandora naked
Click to expand...
Click to collapse
Naked Roms were very nice if you have all your own stuff to load on..
MattR hasn't been around here in a few months though. Wonder how he's doing.
be sure to open the window where both *.nbh and the RUU...exe files are located... according to my experience flashing can not go on without this step
I wanted to install PDACorner v22 RBSN over NRBSN and I flashed defore the See here for more info Dr Puttingham solution suggested ROM via SD.
I have done the SD Flash once more with my WWE ROM 3.54 and in both ROMS the ORDER of flashing parts on my Tytn 's screen was
Code:
IPL,Bootloader,ExtROM,GSM,OS
I know we all use dutty's nbh tool v1.1 for compiling RUU_Signed.nbh .
I dare to make a thought about this tool makes the RBS ROMS to Hard Reset, because it makes the order of flashing
Code:
IPL,Bootloader,OS,GSM
meaning it flashes the Radio after the OS.
Both Stock ROMS with EXTRom flashes the Radio before the OS.
So is there any chance of changing the order in dutty's tool and do the Radio flash before the OS???
In that way we can check if THIS is the problem (and solution) of Hard Resets
Please post your thoughts on my theory and I will contact dutty about this thread to see if he can change his tool
lagoskon said:
I wanted to install PDACorner v22 RBSN over NRBSN and I flashed defore the See here for more info Dr Puttingham solution suggested ROM via SD.
I have done the SD Flash once more with my WWE ROM 3.54 and in both ROMS the ORDER of flashing parts on my Tytn 's screen was
Code:
IPL,Bootloader,ExtROM,GSM,OS
I know we all use dutty's nbh tool v1.1 for compiling RUU_Signed.nbh .
I dare to make a thought about this tool makes the RBS ROMS to Hard Reset, because it makes the order of flashing
Code:
IPL,Bootloader,OS,GSM
meaning it flashes the Radio after the OS.
Both Stock ROMS with EXTRom flashes the Radio before the OS.
So is there any chance of changing the order in dutty's tool and do the Radio flash before the OS???
In that way we can check if THIS is the problem (and solution) of Hard Resets
Please post your thoughts on my theory and I will contact dutty about this thread to see if he can change his tool
Click to expand...
Click to collapse
The only problem here, is that I remove the radio from my stock rom before flashing, and I have had no HR or freezing problems.
Edit: Though.. atm, a single rom flash doesn't last much more than a day...
interesting thread
I don't take shortcuts, I follow the dr's order down to the T, and does take a good half an hour to 45 min to get things running, I will monitor of quicker way of doing it, if it saves me time, I would love to know too, so .. here I am watching with anticipation.
zocster said:
I don't take shortcuts, I follow the dr's order down to the T, and does take a good half an hour to 45 min to get things running, I will monitor of quicker way of doing it, if it saves me time, I would love to know too, so .. here I am watching with anticipation.
Click to expand...
Click to collapse
I'm from Mars m8
NEVER FLASH RADIO WITH CUSTOM ROMS TOGETHER
ONLY RADIO
ONLY CUSTOM OS
OR RADIO WITH OS FROM ORIGINAL SHIPPED HERMES WM6.1 ON mars
anryl said:
ORIGINAL SHIPPED HERMES WM6.1
Click to expand...
Click to collapse
there's no official shipped wm6.1 for hermes as i know
I know all this about not flashing Radio all the time with roms. I just say that the sequense of parts is not the same.
It should be IPL,SPL, Nothing , OS without flashing radio and NOT IPL,SPL,OS, Nothing which is the case now
lagoskon said:
I know all this about not flashing Radio all the time with roms. I just say that the sequense of parts is not the same.
It should be IPL,SPL, Nothing , OS without flashing radio and NOT IPL,SPL,OS, Nothing which is the case now
Click to expand...
Click to collapse
Whatever the order of the pices, wouldnt the firmwear still have to go to the same places in the chip? Or you would end up in brick town.
Didn't someone say the HR's where due to part of the chip not being overwritten, and when you flash another rom, (that isnt a FULL shipped) it ended up causing incomparability issues?
veyka said:
Whatever the order of the pices, wouldnt the firmwear still have to go to the same places in the chip? Or you would end up in brick town.
Didn't someone say the HR's where due to part of the chip not being overwritten, and when you flash another rom, (that isnt a FULL shipped) it ended up causing incomparability issues?
Click to expand...
Click to collapse
Remember guys the Real Big Storage ROMs overwrite the ext_rom portion to use as the extra storage, since it wasnt designed to do this we can assume that sometimes it might not work correctly.
Sure the tools and everything work fine with it all most of the time.
The reason flashing an official ROM seems to remedy the issues with Hard Resets is that if you reflash everything, the flash memory is refreshed back to the correct OS and ext_rom arrangement, then flashing an RBS ROM onto this area should in theory work fine thanks to the "spring clean" of the memory area.
mrvanx said:
Remember guys the Real Big Storage ROMs overwrite the ext_rom portion to use as the extra storage, since it wasnt designed to do this we can assume that sometimes it might not work correctly.
Sure the tools and everything work fine with it all most of the time.
The reason flashing an official ROM seems to remedy the issues with Hard Resets is that if you reflash everything, the flash memory is refreshed back to the correct OS and ext_rom arrangement, then flashing an RBS ROM onto this area should in theory work fine thanks to the "spring clean" of the memory area.
Click to expand...
Click to collapse
Thanks for clearing that up, though it was long those lines! (So close, but so far)
veyka said:
Thanks for clearing that up, though it was long those lines! (So close, but so far)
Click to expand...
Click to collapse
It wasnt until recently that I experienced any hard reset issues with any of the ROMs here, i noticed that leading up to a Hard Reset or freeze at the boot screen things such as file operations and running programs seemed to fail...with access denied errors and etc..
Also programs failed to save registry data aswell, coreplayer repeatedly asked for the activation key (which ofcourse ive got).
Leading me to believe that the storage portion of the OS was not working correctly...and since thats the part we have (pardon the term) misused )) then perhaps a reflash to the old configuration to give the storage area a flat format would do the trikc...which it did.
So its definatly advised, even if you havent experienced the issues, to one in a while before you flash a new ROM, flash an official ROM which uses and ext_rom aswell to give it a quick clean out.
lagoskon said:
I wanted to install PDACorner v22 RBSN over NRBSN and I flashed defore the See here for more info Dr Puttingham solution suggested ROM via SD.
I have done the SD Flash once more with my WWE ROM 3.54 and in both ROMS the ORDER of flashing parts on my Tytn 's screen was
Code:
IPL,Bootloader,ExtROM,GSM,OS
I know we all use dutty's nbh tool v1.1 for compiling RUU_Signed.nbh .
I dare to make a thought about this tool makes the RBS ROMS to Hard Reset, because it makes the order of flashing
Code:
IPL,Bootloader,OS,GSM
meaning it flashes the Radio after the OS.
Both Stock ROMS with EXTRom flashes the Radio before the OS.
So is there any chance of changing the order in dutty's tool and do the Radio flash before the OS???
In that way we can check if THIS is the problem (and solution) of Hard Resets
Please post your thoughts on my theory and I will contact dutty about this thread to see if he can change his tool
Click to expand...
Click to collapse
OK I FOUND IT WHAT YOU MEAN THE TOOL FOR IT IS htcRIE_0.4.0.49.exe as it opens the original ROM deletes ipl spl gsm and saves new orig rom with the order off flashing - splash splash extrom os
at this point im fed up with how bad my 8525 is running and ive done hard resets in the past
i want to go ahead and move up to 6.1 until the touch pro comes out for att
im wondering what is the rom which will give me the most available memory for storage and programs? i can load programs in myself im just lookin for the best basic 6.1 rom
thanks in advance
lbhocky19 said:
at this point im fed up with how bad my 8525 is running and ive done hard resets in the past
i want to go ahead and move up to 6.1 until the touch pro comes out for att
im wondering what is the rom which will give me the most available memory for storage and programs? i can load programs in myself im just lookin for the best basic 6.1 rom
thanks in advance
Click to expand...
Click to collapse
Your going to want a "lite" rom.
I would try CRC V13 or PDAcornerpro V23.
BS roms are faster, and have more storage, but PLEASES flash the AT&T shipped rom in my 4shared before flashing one.
And make sure you have HardSPL first.
And that you have .net framework installed, on the computer your flashing from.
veyka said:
Your going to want a "lite" rom.
I would try CRC V13 or PDAcornerpro V23.
BS roms are faster, and have more storage, but PLEASES flash the AT&T shipped rom in my 4shared before flashing one.
And make sure you have HardSPL first.
And that you have .net framework installed, on the computer your flashing from.
Click to expand...
Click to collapse
i tried to flash Hardspl earlier and when i tried. wmdc found it and it went to the boot screen with the 3 colors then once it got there it said it couldnt find my phone after it already did
any ideas?
Go to page 116 , post 1160 of this thread - http://forum.xda-developers.com/showthread.php?t=296722
All necessary programs and links required (as well as instructions) to flash Hard SPL using the SD card method...My preference, just make sure battery has more than 50% charge.
To flash a new os with the sd card method, just drop steps 5 & 6.
Cheers...
quick way to flash
just use sspl. It's a cab which runs on the device and takes you to the bootloader. No hardspl necessary
-J
Hard SPL is a safer thing to have installed. It gives you a better chance of recovering your Hermes if something goes wrong. There are no guarantees of a successful flash, EVER. But, with Hard SPL, you have a chance at recovering your device.
SSPL is called "Soft SPL". It was developed earlier and Hard SPL came out of the hard work that SSPL was the foundation of.
Its up to the individual. Would you be the man who uses his foot to find mines, or the man with the radio controlled minesweeper robot? Your choice....
Cheers...
thanks alot everyone il give it a shot later on today
After flashing some of the recent roms here on XDA, I seem to be having a bit of a problem.
After installing some programs,the program icons change in to windows logos and i'm unable to use them and my phone locks up instantly and only a hard reset will work.
If i do a soft reset i only get to the windows mobile screen or htc startup animation screen, then it freezes.
I have been flashing roms for a couple of years and have never had this problem,any help would be appreciated.
owz206 said:
After flashing some of the recent roms here on XDA, I seem to be having a bit of a problem.
After installing some programs,the program icons change in to windows logos and i'm unable to use them and my phone locks up instantly and only a hard reset will work.
If i do a soft reset i only get to the windows mobile screen or htc startup animation screen, then it freezes.
I have been flashing roms for a couple of years and have never had this problem,any help would be appreciated.
Click to expand...
Click to collapse
There's not alot we can tell you if you don't tell us about your device, rom, radio, hardspl etc setup.
I'm using C.T 6.4 original touchflo but have tried others. I have olinex 1.40 spl
and have a DIAM 100 model and radio 1.00.25.05
Try another ROM.............there is that freak of nature possiblity that the Hard SPL is incompatible (rare).
If another Rom persists, then move to Hard Spl 1.93. I know some Chefs recommend a specific Hard Spl at times but again it's rare.
Can i just flash 1.93 spl over 1.40 spl, or is there a different way of doing it.
*Edit* I just tried to install 1.93 spl and it didnt work it still says i have 1.40 spl,what am i doing wrong ?
These Hard SPL developer's edition has write protection. What you need is an APP called Jump SPL....http://forum.xda-developers.com/showthread.php?p=3328000#post3328000.....POST #10
I'm using CT 6.4 OrigTF Full with HSPL 1.93 with absolutely no problems (apart from a landscape bug that I solved by installing the original Diamond Volume Control). I highly recommend it, for me it's the best I've ever used in terms of speed, stability and functionality. Remember to Hard-reset after flash. You migh also have a bad flash or a bad download. If changing HSPL don't work, try to download the ROM again and re-flash.
When I upgraded HSPL from 1.40 to 1.93 I used a version with jump-SPL included, don't remember where I found it though.
Good Luck!
I always do a hard reset after a flash and have tried numerous roms but seem to have the same problem with all the roms.
Think i might have a problem with my diamond
Thanks for all your suggestions.
hello. I have a problem. I wanted to put new rom on friend`s Diamond but when it finishes, it says error 270, the image file is corrupted.On Diamond:Upgrade rom code error, please try again.What can I do now?I made soft reset and repeated again, nothing changes.I cannot even turn off the device.It only shows tricolor,security unlocked.(RUU Diamind HTC WWE 2.03.405.2 Radio signed diamond 52.51.25.26.1.09.25.23 ship.exe (100MB))
I am ok.Made it with a different rom.
O.k. I've tried a few different roms and hard spl today, and deleted my internal and phone storage and my phone is still not working properly.
It works fine after a flash and hard reset, but as soon as i turn it off then back on it freezes either on the diamond black boot screen or windows boot screen.
Looks like I need to get a new phone
Don't know if this is of any help but, when i cooked some roms for my "Artemis" i would get this sort of error if the rom was a little too big (I had added too many programs <5mb too much it would build and flash without error) it would work for a few days the slowly start to loose programs as if it had a virus or something deleting stuff slowly.
the only way to fix it was to flash a stock rom inc ipl,spl and radio then re-flash a custom rom, (a new custom rom alone would not cure it) i think the rom when flashing filled the area designated for the rom then started to overright the spl or ipl
just a thought? i don't know weather the diamond would suffer from the same problem with a bloated rom!
dose anyone know what the max size for a diamond rom is?
what happens if the rom is a little too big say 2mb?
Thanks,I've just flashed the new windows 6.5 rom which is working at the moment,but if it fails i'll give your idea a try.
owz206 said:
Thanks,I've just flashed the new windows 6.5 rom which is working at the moment,but if it fails i'll give your idea a try.
Click to expand...
Click to collapse
Man i had almost the similar issue in the recent times .. The only work around is to download and flash a stock Rom ( no matter which one it is ) , like what explained in the previous post . Use the stock fr a day or 2 , then flash it back .
just a quick question for a stupid noob, ive flashed my diamond to Gen.Y TouchFlo3Dv2.1 VGA and im loving it, its taken a while but ive got it just how i want now, if i change the radio will i have to set up all my apps again
no.....
when i run the program its a ruu and i thought that would wipe all my apps and i would have to re install my apps, but your saying no, all my programs will stay and all the reg tweaks ive made will stay untouched .
It will wipe programs from your "phone" memory,not from the "internal" memory I think. But I think that the old ones will not be visible. Settings after flashing new rom will be removed. That's my oppinion
Radio...
Flashing a radio won't touch any of your programs or settings... it's in a different part of the ROM
Flashing a Radio..
bazz7777777 said:
when i run the program its a ruu and i thought that would wipe all my apps and i would have to re install my apps, but your saying no, all my programs will stay and all the reg tweaks ive made will stay untouched .
Click to expand...
Click to collapse
Hi Bazz..
What Benko said, short but sweet , is absolutely right.. Just use the CustomRUU.exe (flashing utility) and the radio file you want and flash as is (I have HardSPL on my phone allowing me to flash anything).. I applied the same Gen2.1 ROM (my compliments to Yozgatg for a great ROM ) not more than a week ago, tried the Radio 1.13.25.24 and then decided to go back to 1.15.25.14 (search on forums and you'll find it). I've been using that Radio for a good number or months and it's pretty reliable and good on battery (for HTC Diamond) so you might want to have a look and see what others have said about it
BTW - I flashed it as is and didn't have to re-enter any settings at all and my phone booted as normal after. If you sync your phone with your desktop PC make sure you get a sync BEFORE you upgrade just in case as it's better to be safe but like grahamkdt said I doubt you'll need it.
Yeah SRY, I ment the full rom flashing