hello friends.. I need ur help...
From where can i get WM6 rom for my ipaq 2190 that can be flashed using an SD card cause i dont have the sync cable.... Plz also let me know the complete procedure to load the rom.....
mantej2008 said:
hello friends.. I need ur help...
From where can i get WM6 rom for my ipaq 2190 that can be flashed using an SD card cause i dont have the sync cable.... Plz also let me know the complete procedure to load the rom.....
Click to expand...
Click to collapse
look here:
http://forum.xda-developers.com/showpost.php?p=1516882&postcount=66
for sd flashing, I think is not possible until now. I didn't see anywhere something about this.
Becareful with the upgrade process, as you have to upagrade the OS in a SPECIFIC order or you will screw up the pda - also, I believe in order to flash from the SD card, you simply enter bootloader mode and insert the sd card with the rom file on it - might take more than that however... dig through the hx2000 wm6 thread and you'll find most of your answers.
Hi folks,
i tried to run xanadux on my XDAIII. As the installation is not difficult I was
wondering why nothing happend after inserting my SD card. Even a reset
couldn't help.
After some googling I discovered that the autorun-facility could be broken.
My XDAIII has a persistent storage, can this be the problem? Or has O2 Germany
disabled the autorun-facility? Has anybody else the problem?
Please help me getting tux on my XDAIII
regards
Goran
I had the same problem, but I just clicked on Haret and linux booted up.
HELlo,
i am having a problem to upgrade an Axim X50v to WM05. I have downloaded the 4 files and i have put them in the root directory of a fat32 formated memory card. When i try to run the bootloader (power+reset+wireless) the unit asks if i want a hard reset but does not start the update to WM05.
Any ideas what am i doing wrong?
Thanks
i have htc p3300 i have finished upgrade dis rom WM6.1 htc p3300achilles_ROM_ver_3_YouTube.1.321C02 after upgade finished my battery drain faster den i plan to upgrade radio rom, ARTEMIS_RADIO_3.39.90 it stuck in 79% but right now i got only searching for sd card then boot loader mode i have been seen lots of thread in dis forum i got only suggestion to run original htc shiped rom but da problem is when i upgrade original htc rom i got 274 error again and again i cant upgrade the original rom please help me urgent am upset
sometimes i get bootloader mode sometime i cant get,in begining searching for sd card den i get bootloader mode, is there any way to flash rom through sd card?i thought my battery is lessthan 50% how can i charge my battery in bootloader mode plz give me the solution.
If you are in bootloader you don't need 50% of battery.
Just flash the ROM.
See here for Sd-card flashing: http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
thank you for ur reply, i have rename .nbh file and put into sd card when i start phone first i get searching for sd card, den searching for sd content after 20 minutes its back to 3 colour bootscreen any solution?
thanking you.
Are you trying to do it with a SDHC card?
no just i have normal 1gb and 128mb micro sd card, first i try in 1gb card den i try 128mb card still i havnt upgrade ruu its first searching for sd card den searching sd contents datz it after dat pda is automatically turned off i do no y, how can i find SDHC card normal sd card?
yet no replies urgently required pleaseeee
my artemis always in bootloader mode i cant flash original rom also which rom i have to flash? everyday am trying to upgrade its shows 0% then upgrade error (266) and i cant sd flash also just searching for sd card den checking sd content and back to bootloader mode how many files i have to copy in sd card? am waiting for ur kind repleis thank u.
similar problem
I have some problems with my ARTEMIS P3300 (arte 100).
problem : I can't flash HTC WM6 english from http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
Why I need a clean rom : I tried FlyROM Manilla and Touch ROM WWE 4.02 full and vanilla but they are unstable. I had many white screens, phone shutting down in conversation, freezed many times.
I tried to flash with USPL and got the INVALID MODEL ID error (if I used a wrong rom please tell me what to chose from the list http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades ) ;sd card and sim were out, battery full
I tried to sd flash following these instructions http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing and got to the Update sd image but after presing the slider down the screen faded down. after 1/2 hour I pressed the power button and the old rom started
what was wrong ?
Now I'm using FlyROM manilla and i still want to flash a factory rom
Sorry if my English is too bad, but i've got 1 problem when upgrading my p3300
My p3300 got spl 1.11.0000 that means i can easily upgrade my OS to wm6.5. I'm glad, but my ppc can't connect to pc via activesync so i decided to uprom in MicroSD card.
I learned in: http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
So i started upgrading, but i got some error. My ppc enter bootloader with this sign" Checking SD contents" end then it come back to the bootscreen( 3 lines of colors) . Now, i can't upgrade my Rom, can't enter OS. Please tell me what wrong with this progress. i think maybe my SD card too bad ( a chinese sd card), or my Rom too bad ( i tried 2 dif Rom).
Please someone help me. pls. Thanks first.