Downgrading from wm5 as i want all my backed up messages and phone numbers back but wen downloadin the asia rom i went to get the extended stuff off the wiki ftp site but i cant get last 3 files.
Extracted extended rom, opperator configs and splash
Anybody help?
Related
Hi everyone
I have used the fanstatic guides & software on this forum to update my Orange SPV M3100 to WM6 successfully (for the second time - had to return my first M3100 due to white screen of death).
However, this time, despite trying every Orange settings CAB I can find, I can't send Text Messages ("Your text message cannot be sent") and my voicemail light is stuck on (even though I have no voicemails) (I have tried the Voicemail fix CAB on the wiki without success).
If anyone can help I'd be really grateful
Goto the link and download the cab to your phone, execute it and soft reset the device, see if it fixes the problem.
http://www.4winmobile.com/forums/hermes-black-rom-support/11624-orange-uk-rabdo-v1-6-cab.html
Thanks Starfury. I tried what you suggested, but to no avail. Messages sit in the outbox for a minute or so, then I get the Cannot Send message. Voicemail indicator stuck on too. Have tried hard reset. Not sure what to do next
This always works for me on OrangeUk M3100 with any version of WM6 mate.
Hope it does same for you. Would've thought it will.
Thanks chunkymonkey. I've already tried that one, but I gave it another go....no effect.
I think there is a deeper problem here...
I can see what you are saying regarding the CAB files fixing the problem however I had this problem with my first ever WM6 flash as I only upgraded the ROM not the Radio and was using a really early radio version.
My messages would not send and also when I fixed this my voicemails would get 'stuck' and the voicemail light was always on.
Which ROM are you using? which Radio version etc?
Personally I fixed mine by flashing to black magik and uprading to radio 1.48
Thanks Raven. I'm not sure how to tell to be honest.
I unlocked the phone using "HTC Hermes SIM & CID Unlock - v3a"
Then flashed "HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108"
How can I update my Radio? Can you point me in the direction of the right file?
Thanks loads
Hi mate,
Try this, this is a guide to upgrading to radio 1.43, the principle is the same though for all radio versions. Ensure you have HardSPL installed etc.etc.
(read all the guides lol!)
You should be able to find newer radio version on this forum, I use 1.50 at the moment on Orange UK and works a treat
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=61&Itemid=27
Hope this helps
Thanks for the tips Raven. I have successfully flashed to Radio version 1.5 - but there's no change to the problem at all.
I've totally run out of ideas on this one, gonna throw the damn thing out the window its so frustrating!
All I can suggest is flash to another 'cooked' rom.
I'm using black X (RC) at the moment, super fast and just enough apps to keep me going. Having no trouble at all with this rom and radio 1.50.
well i've bought a htc s620 on ebay and it has windows mobile 6 standard beta on it. CE OS 5.2.1215. i've tried installing wm 6.1 by kavana on it but at 3% it just exits and said image is corrupt but that very same image worked on a BT s620. i've tried application unlock on the s620 and it says "phone is not unlockable". what can i do to remove the beta version and install 6.1? btw i've to set a wrong date to be able to use the beta version else it will lock the phone and i won't be able to use it
please read the noob guide, use the search and your answer will be found, this has been covered so many times....
i've read everything tried everything but that **** refuses to update. i've tried a lot of roms but everytime i get " image corrupted" whilst the same roms work on another s620. i've tried to application unlock it but i get "phone is not unlockable". help please
Go to NRG Rose ROM 1.7 Remade in sig and check out the how to flash.
Hi - while trying to install Skype, the entire OS simply crashed. The phone does switches on but no longer finds the OS. Hence, I have no way to get an ActiveSync connection. Is there any way to install a clean O/S onto it?
Thanks in advance,
First step take your time to read the sticky located at the top of forum..
You could try an hard-reset and if all else fails flash stock ROM via bootloader, then update to ROM of choice.
Error 300
Thanks. I did. Particularly the "unbricking instructions post" from ookba.
The issue is that my Dash does not even start up. Hence, there is no way for me to get an active sync connection.
Current Status:
- phone can be started by pressing the Camera key and Power, which shows the red-green-blue screen
- phone can then be connected to the PC via a USB connection. I hear the ba-bing, but the phone does/will not establish an Active Sync (which makes sense)
- downloaded the TMO official ROM from the TMO site which is a WM6. Now, I know my phone did not previously have WM6. It probably had WM5.x but I cannot find the SHIPPED ROM anywhere.
- when I tried the RRU from TMO WM6 ROM, I got through all the way to upgrading. At which point, the mobile screen went to a white/grey with status bar stuck at 0%. But the PC application crashed and gave an error 300.
repeated the same with Kavana's ROM and the same issue.
I am looking through the forums for error 300 but most solutions seems to require an Active Sync connection. Any other suggestions?
Thanks.
have you tried hard reset? thats your best option
like stylez said, find the stock rom that was already on your phone and flash that.
i know you said you cant find it but it'll be online somewhere
look here
http://forum.xda-developers.com/showthread.php?t=381726&highlight=official+roms
The key here is that you find your original stock rom, I had the same issue a while ago and took some time to get my stock rom in the web, since the forum didn't have it. I found it in the rapidshare library http://rapidlibrary.com/index.php?q=rapidshare+library, searching under HTC s621 rom. Additionally, have u try method # 3 in the unbricking tutorial? It worked for me.
For the past few days i havent been able to connect to the internet on my TP2. Everytime i open up Opera or IE it sends me straight to m.web2go.com telling me i need to upgrade my subscription. Spent about 30min on the fone with tmobile trying to figure it out and got no where.
Tried to flash the stock rom to my fone to see if that will fix it and i keep getting a 260 error with the rom updater and No Image File when i do an SD flash. I was able to flash Energy Leo 23529 to my fone today from the prior Energy rom. After that i cannot flash anything else to it.
Any ideas on what exactly the problem is and/or a fix for it?
After flashing some custom roms and trying to go back into miui, im getting no signal in no one of two sim card slots. When im trying to see my imei in the settings, it says "unknown". i try to flash differents android and miui version, but nothing seems to fix that. Anyone now something??? pls help
Edit: I have the original box of the device, so i have the original imei1 and imei2, but i dont get a way to put it in the phone im so scared lmao
Im looking for some pages and said that i need to flash persist.img back, anyone knows where can i find that image?. Because if i extract tgz of the miui rom, there's not persist.img. If anyone have that image pls tell me
Anyone pls can make a twrp backup from your phone and give it to me ? i guess this is the only way to fix this, im have looking for hours and i cant solve it, i flash firmware stock and an update of the firmware and now i got signal but still no imei idk what happens, and in wifi there is a wifi signal with the "nvram error" name. pls help
After a reboot, i lose the signal again