Looking for Siemens SX56 vibration motor - General Accessories

Hello all,
I've had my SX56 for a few months now and have had few problems with it until just now, when the vibrate function stopped working. A hard reset did not fix it. The only software change I'd made was months ago, to upgrade the OS to WM2003SE, so for now I'm going with the theory that the vibration motor has died
Does anyone know where replacement SX56 vibration motors are available, or have one for sale? I've searched these forums and the web, and didn't find anything. Any information is appreciated, thanks in advance.

Related

Quality of Blue Angel Bluetooth Audio - Definitive Answer?

Hi all,
I bought my SX66 from Cingular two weeks ago and so far I LOVE IT. Bluetooth, WIFI, PDA, phone, and a QWERTY keyboard all in one slick package.
However, as you all know, the bluetooth audio has MAJOR issues. I have upgraded my radio to 1.13.00 and my bluetooth stack to 3900. The volume level of my bluetooth headset has improved, but one thing remains - the HORRIBLE snap, crackle and pop (noticeable on both ends of the phone call).
Because the radio ROM and bluetooth stack updates have not helped, I am beginning to fear that the problem is a hardware design flaw. However, I'm hoping that some bluetooth headsets may compensate for this better than others.
I have read through all the forums but have yet to come accross a consensus for the best bluetooth headset (the one that has the least crackle and pop interference).
So here's the question - has ANYONE used a bluetooth headset with the Blue Angel that does NOT suffer from the audio problems described above? I would love to settle this once and for all.
I hate to have to spend money on a new bluetooth headset when my Motorola HS820 has worked fine in the past with other phones. However, it would be even more of a shame to turn my SX66 into a glorified $500 PDA and go back to using my Motorola V600 for phone calls.
Thanks in advance for any advice. Also - I am a new member of the XDA Developers forums and I want to say that they have been INVALUABLE to me. The SX66 users manual from Siemens is nothing more than an overview of the Pocket PC 2003 OS. These forums (and the wiki pages) tell me how the SX66 REALLY works.
Cheers,
Warwick
Bad news. I tried with 4 diferents blouthoot head set with the same problems (including the new jabra BT800). I use a cable headset and if I need my hands free I use my Sony Ericson phone.
So from now their is no good option to solve this problem.
FYI - I sent the following e-mail to Siemens customer support, just to see what they'd say:
"I recently bought an SX66 Pocket PC Phone from Cingular.
Everything works great, with one exception - the audio quality on my
bluetooth headset is TERRIBLE. Specifically, there is non-stap crackling
and popping. According to a web site devoted to SX66-like devices
(www.xda-developers.com) there is no known fix for this issue, and it is
a problem with the bluetooth antenna itself. Is this true? If so, the
product is defective and I will be returning it to Cingular for a full
refund. While it is a great device, it is useless to me if I can't use a
wireless headset to talk on the phone. P.S. I have already installed the
latest driver updates on the Siemens Web site."
Their response:
"Dear Mr. Webb,
Thank you for contacting Siemens Customer Care. I would like to thank you
for your trust and support by inquiring about the SX66. I will be glad to
assist you.
I understand that you are having problems with static while using a
Bluetooth headset.
Please understand that there are no settings on the phone that will improve
the function on the Bluetooth on the phone. It either works or it doesn't.
I would recommend trying to pair up another headset to see if the problem is
with the headset or the phone. If another headset gives you the same
problem the phone may be defective. Before taking it in for repair, you
will want to first try a hard reset on the phone. A full device reset
clears memory, deletes all data and restores the SX66 to its default
settings. Programs installed at the factory remain, erasing all data that
you have created and programs you have installed. To full reset the SX66,
press and hold the power button, and then use the stylus to press the soft
reset button at the same time.
**NOTE** Be sure you have backed up all your data in a SD card or on your PC
before performing a full reset!
If this does not resolve your issue and your phone is less than a year old,
then it can be repaired by Cingular. Please take your SX66 to your local
Cingular store for a warranty exchange or repair.
I hope this has brought resolution to your issue and that I was able to be
of assistance. Your case number is XXXXX. If you need further assistance,
please reply to this e-mail. If you reply, please ensure that your reply
contains a copy of this e-mail.
You can visit us on the web at http://www.siemens-wireless.com. We also have
our Customer Care Hotline available Monday through Saturday from 8AM until
7PM Central Time at 888-777-0211.
Thank you for choosing Siemens; have a nice day.
Sincerely,
Siemens Customer Support
"
It either works or it doesn't. GREEEEAAAAAT.
My HS810 set has worked great with limitations. The phone has to be in close proximity to the headset. I have static issues when I have the phone hooked to my belt and am walking briskly. But as far as using the headset in my car with the phone sitting on the passenger seat it is great. I bought a secong set of HS810's and had the same good results.
HBH-300
I'm using the HBH-300 with very little static. The headset has noise-cancellation features which seems to help a lot... according to the folks on the other end of the conversation. Like the previous poster, the SX66 has to be in line of sight to the headset, otherwise I experience static. So for instance, if I carry the PDA in my left hand w/ headset in right ear, I need to make sure my body doesn't block the "line of sight". When the SX66 is on the desk, I have no problems, again as long as I don't block the line of sight.
Shouldn't be this way, but it solves most my problems.... I'm using Radio 1.13 and still 1.40.

SPV M5000 issues with the phone..

Hello,
I have recently purchased a SPV M5000 in used condition and I was able to update the ROM to WM6 however, the phone aspect of this device seems to be working poorly just like it did with WM5 (I thought the update would fix it). It often disconnects and or does not recognize the SIM card’s presence. Although when it connects it works fine but the connection only last a short while, after which point it disconnects and does not recognize the SIM card or searches for service a long time…
I have read through this forum as much as I could but my lack of knowledge in this area prevents me from making much sense of this. Could you ladies and gentlemen lend me a hand in fixing this issue?
Thank you!
i have a m5000 and have NEVER had any of the above problems
My Radio version is 1.13.00, perhaps updating it to a higher version can solve the problem? Can someone help me in this department? which version would it be best for me to try, where can I get it and how to install it? If anyone has the time to help me and break it down for me I would apreciate it.
Thank you.
nihutams said:
Hello,
I have recently purchased a SPV M5000 in used condition and I was able to update the ROM to WM6 however, the phone aspect of this device seems to be working poorly just like it did with WM5 (I thought the update would fix it). It often disconnects and or does not recognize the SIM card’s presence. Although when it connects it works fine but the connection only last a short while, after which point it disconnects and does not recognize the SIM card or searches for service a long time…
I have read through this forum as much as I could but my lack of knowledge in this area prevents me from making much sense of this. Could you ladies and gentlemen lend me a hand in fixing this issue?
Thank you!
Click to expand...
Click to collapse
can i ask u the obvious? have u put the sim in correctly and locked it in? also try locking the battery, sounds like you might have a wonky sim holder?
everything is locked and securely fastened.. I doubt it's the sim card holder.

No ringer or speakerphone sound after radio and rom upgrade...help needed.

Hi All,
I have a Hermes200 and tried to upgrade to WM6 as per the correct instructions. I initially upgraded the radio to 1.47.00.10 and Schaps 4.30 and in the process lost all external speaker volume. Meaning it does not ring or play any sounds other than the little earpiece.
In the meantime I've tried 1.51.00.10 and Schaps 4.31 and the situation is the same.
BTW it's an unlocked phone originally bought from Rogers.
Any advice would be appreciated.
I gave 1.54.00.00 upgrade a try but stil no good. Anyone else face this issue? Is there a previous radio version that works? Or is it the WM6 upgrade?
I had the same thing happen to mine...but it turned out to be the actual speaker that was broke. I got a replacement speaker off ebay.
trendal said:
I had the same thing happen to mine...but it turned out to be the actual speaker that was broke. I got a replacement speaker off ebay.
Click to expand...
Click to collapse
Was the replacement difficult? Any special tools?
I just found it so strange that it happened the moment I did the upgrade
My speaker has just packed up, bloody annoying really as I needed to use tomtom at the time, I got a replacement off ebay.
http://cgi.ebay.co.uk/Y220-Int-Ring...10364QQcmdZViewItemQQ_trksidZp1713.m153.l1262
he provides the tools, search for dismantling instructions on the forum, its easy really...
My speaker packed up recently too, downgraded back to T-Mobile WM5 and took it into a T-Mob shop to be fixed under warranty. They gave me the crappest phone known to man as a loan so I've gone back to my (9 year old ) Nokia 6210 as it's a lot better lol.
tonyb15re said:
My speaker has just packed up, bloody annoying really as I needed to use tomtom at the time, I got a replacement off ebay.
http://cgi.ebay.co.uk/Y220-Int-Ring...10364QQcmdZViewItemQQ_trksidZp1713.m153.l1262
he provides the tools, search for dismantling instructions on the forum, its easy really...
Click to expand...
Click to collapse
That's the same guy I got mine from!
To the OP - it's not very hard at all...just make sure you get a copy of the Service Manual and follow that on how to remove the old speaker.
You might actually find that the speaker isn't broke...and it's just the connector that has come off the mother board.
Got my phone back from T-Mobile yesterday and it's been exchanged for a brand new one
Seems a bit excessive for just a busted speaker but who am I to complain
Just realised today that the scroll wheel doesn't work as the ok button when you click it in, so this one will be going back to T-Mobile too
Will see if I can get a Kaiser out of them instead

replacement motor for xda orbit

Hello,
First of all I want to apologize for my bad English.
I'm from Germany ...
This forum since to be my last hope.
Few days ago I purchased the xda orbit on ebay.
But this was the case changed and the vibration motor not rebuilt.
So I have no Vibrationsfunktion, as the motor missing.
Can you tell me where to buy or order a replacement motor?
Thanks for your effort
Hi @all,
ok the problem was solved.
I took an old Siemens M35 and put of the motor.
Then I put in the vibrationmotor in my xda orbit. All rigth it runns.http://forum.xda-developers.com/images/smilies/smile.gif
bye

Xda orbit connection help please

hello,
im not all that good with the jargon of all these smartphones, as im fairly new to them, but im having a slight problem.
My Xda Orbit (Artemis) keeps on loosing the connection and it has often been a day or so untill i realise, obviously missing any incoming calls/texts etc. Obviously this has caused some problems. It either just randomly looses the connection, so the X at the top of the screen appears indicating there is no connection, and sometimes for some random reason it even turns off the phone/turns on airplane mode.
basics: Xda orbit running on WM 6.1 with the ROM "Artemis Touch 4.02 WWE installed. However i have had the ROM installed for months, and had no problems, this is a fairly recent thing that has started to happen over the last month or so.
if anyone could help, that would be greatly appriciated.
cheers.
losing conection
i had the same problem 1.5 years old p3300
i contacted htc support or in your case contact the manufacturer
mine got repaired , got a new motherbord. no cost at all

Categories

Resources