Unlock tool and text messaging - MDA III, XDA III, PDA2k, 9090 General

Question pertains to Qtec 9090 (Siemens SX66).
I have used the "unlock" tool which worked very well. However, if I run the unlock tool again, the tool responds with the same default window for installing. I would think that once the phone is unlocked, a message would pop up saying "phone already unlocked". My main question is: once the phone is unlocked, upon soft reset, are the "unlock" states removed or is the phone still unlocked?
Not related to the above question, does anyone know how to create a "group" for sending text messages. With microsoft outlook, groups can be created, but these groups do not allow for text messaging. Any ideas? I would like to be able to send 1 text message to a group of phone numbers.

Related

Unlocked T-Mobile Dash Issues...HELP!!!

Hey all. I used IMEI-CHECK to unlock a T-Mobile Dash I bought and now I am encountering some issues. I am using the phone on Cingular’s network. I have a Data package with them and for some reason cannot connect to the web from the phone. Also, when I ActiveSync, my contacts from OUTLOOK do not transfer over. I get an error message. I had a NOKIA E61 and all worked fine. I do not know why I am getting these error messages.
Also, under the COMM manager, the “Direct Push” and “Data Connection” options are grayed out and I cannot set up anything….
Please help. Do I need to rip the phone’s software off and re-install unlocked setting or what? How do I do it?
Thanks….
I don't think your issues are related to unlocking, backup everything and try a hard reset on the device and then try to activesync and setup your email account.
Did you change your settings?
You need to change your settings to work with cingular. Search this forum for the cingular wap/mms settings.

error TXT MSG (weird, huh?) received everytime restart phone

Hi, I have an unlocked dash that I'm using with Cingular and everytime I restart it, I get this text message from 1121611611 and it says:
"453 Please re-send using a valid 10 digit mobile number or valid short code. 06050415CC15CC60D8"
I'm using the T-mobile WM6 rom that they released. Any ideas as to how I can fix this?
On a side note, also whenever I restart my phone, the ring tone goes back to the default "Ring-WindowsMobile" instead of the ring tone I had selected before I restarted my phone. Any ideas? Thanks!
the text message is from your my fav 5 trying to check in with T-Mobile on every restart. because you are on Cingular it is giving you this error. you need to look in your "Start Up" folder and delete the Myf5.lnk file. this is not an easy task. it is a read only file. i had luck turning off the data and push then renaming the file then deleting it.
good luck
actually, its pretty easy to delete.
using celetask, change the settings to show exlude. restart the device then go into celetask and stop the my five app from running. you can then go and delete it.

Rogers (CANADA) Messaging Center Number

Let me guess...
You've discovered some hidden menus recently by typing codes in the dialer and find out this one: *#*#4636#*#* that open a "Testing" screen showing options like this:
Phone Information
Battery Information
Usage Statistics
Wi-Fi Information
Then you went to Phone Information
Tried some options (maybe played with SMSC:_________Update / Refresh ) but that was not doing anything so you exited the menu.....
after a while you wanted to send a text or someone was asking you "Did you got my text?" and you didn't....
Here's what hapened: Accidentaly you erased from your phone the "Messaging Center Number" wich is responsible for giving your phone the access to the SMS/MMS central of your provider.....resulting in loosing the ability to send/receive messages.
Don't worry, after having navigated XDA Forums I finally found my way to make it work again (yes that's because I did it that I now now it).
By the way, even if you Factory reset, flash a new rom/radio/kernel that mistake is gonna stay. You need to enter the number again.
in the *#*#4636#*#* hidden menu,
scroll down to "SMSC:"
in the box type: 0791715097960300
press the "Update" / "Mettre à Jour" (first button)
Now exit and Reboot the phone.
To test it, don't try to resend an old test message as it contain old message center number. I even suggest to delete previous text messages from your inbox if possible.
If it worked, everything should be fine by now. (you can even kudo me for this loll)
NOTE:
The real Roger Center number is +17057969300
the thing is that it need to be Encrypted in Hexadecimal PDU format.
(user MarcusVanSciver on XDA shown that link in thread http://forum.xda-developers.com/showthread.php?t=1412261)
That was for Orange Network (european have 8 number to phone number instead of 7 so I had to add a 0 at the end to make it work for Rogers)
after Encryption the number was now: 0791715097960300
This worked for ROGERS, the trick could maybe work for other networks but I can not validate the info. (but for sure this will not be the same number)
This had been tested with stock rom and Custom Rom With Custom Radio and Custom Kernel.
If this helped you, please give credit to this post ;-)
http://forum.xda-developers.com/showthread.php?p=25204768
Easier way to do it without mucking around looking for your SMSC. It's how I got mine up and going again!
Sent from my Galaxy Nexus using XDA
Teranox said:
Let me guess...
You've discovered some hidden menus recently by typing codes in the dialer and find out this one: *#*#4636#*#* that open a "Testing" screen showing options like this:
Phone Information
Battery Information
Usage Statistics
Wi-Fi Information
Then you went to Phone Information
Tried some options (maybe played with SMSC:_________Update / Refresh ) but that was not doing anything so you exited the menu.....
after a while you wanted to send a text or someone was asking you "Did you got my text?" and you didn't....
Here's what hapened: Accidentaly you erased from your phone the "Messaging Center Number" wich is responsible for giving your phone the access to the SMS/MMS central of your provider.....resulting in loosing the ability to send/receive messages.
Don't worry, after having navigated XDA Forums I finally found my way to make it work again (yes that's because I did it that I now now it).
By the way, even if you Factory reset, flash a new rom/radio/kernel that mistake is gonna stay. You need to enter the number again.
in the *#*#4636#*#* hidden menu,
scroll down to "SMSC:"
in the box type: 0791715097960300
press the "Update" / "Mettre à Jour" (first button)
Now exit and Reboot the phone.
To test it, don't try to resend an old test message as it contain old message center number. I even suggest to delete previous text messages from your inbox if possible.
If it worked, everything should be fine by now. (you can even kudo me for this loll)
NOTE:
The real Roger Center number is +17057969300
the thing is that it need to be Encrypted in Hexadecimal PDU format.
(user MarcusVanSciver on XDA shown that link in thread http://forum.xda-developers.com/showthread.php?t=1412261)
That was for Orange Network (european have 8 number to phone number instead of 7 so I had to add a 0 at the end to make it work for Rogers)
after Encryption the number was now: 0791715097960300
This worked for ROGERS, the trick could maybe work for other networks but I can not validate the info. (but for sure this will not be the same number)
This had been tested with stock rom and Custom Rom With Custom Radio and Custom Kernel.
If this helped you, please give credit to this post
Click to expand...
Click to collapse
Thanks dude! It worked for me
Teranox said:
Let me guess...
You've discovered some hidden menus recently by typing codes in the dialer and find out this one: *#*#4636#*#* that open a "Testing" screen showing options like this:
Phone Information
Battery Information
Usage Statistics
Wi-Fi Information
Then you went to Phone Information
Tried some options (maybe played with SMSC:_________Update / Refresh ) but that was not doing anything so you exited the menu.....
after a while you wanted to send a text or someone was asking you "Did you got my text?" and you didn't....
Here's what hapened: Accidentaly you erased from your phone the "Messaging Center Number" wich is responsible for giving your phone the access to the SMS/MMS central of your provider.....resulting in loosing the ability to send/receive messages.
Don't worry, after having navigated XDA Forums I finally found my way to make it work again (yes that's because I did it that I now now it).
By the way, even if you Factory reset, flash a new rom/radio/kernel that mistake is gonna stay. You need to enter the number again.
in the *#*#4636#*#* hidden menu,
scroll down to "SMSC:"
in the box type: 0791715097960300
press the "Update" / "Mettre à Jour" (first button)
Now exit and Reboot the phone.
To test it, don't try to resend an old test message as it contain old message center number. I even suggest to delete previous text messages from your inbox if possible.
If it worked, everything should be fine by now. (you can even kudo me for this loll)
NOTE:
The real Roger Center number is +17057969300
the thing is that it need to be Encrypted in Hexadecimal PDU format.
(user MarcusVanSciver on XDA shown that link in thread http://forum.xda-developers.com/showthread.php?t=1412261)
That was for Orange Network (european have 8 number to phone number instead of 7 so I had to add a 0 at the end to make it work for Rogers)
after Encryption the number was now: 0791715097960300
This worked for ROGERS, the trick could maybe work for other networks but I can not validate the info. (but for sure this will not be the same number)
This had been tested with stock rom and Custom Rom With Custom Radio and Custom Kernel.
If this helped you, please give credit to this post
Click to expand...
Click to collapse
Hey man, this might be a bit old for you but i just got a galaxy nexus. I am having the outgoing text issue. I've tried that number and everytime i hit update it just says update error. Think you mightbe able to help me?
Damn this doesn't work for me
To program the SMSC (Text Messaging) number on Android devices, please follow these steps:
Go to the phone application.
From the phone application, press *#*#4636#*#*. (You will have to press the Call or Send button after entering this code in for some Android devices).
Tap on Phone Information
Scroll to the bottom to where it says SMSC and enter this number exactly as you see on this page (including all symbols): +17057969300
Press Update.

New User: Problems with changing details of user profile.

After logging in with either Waterfox or Chromium when I go to User Profile/User Details. It says:
"Our records show that you have already registered under the name of aileronster. If you have lost your password, click here. If you would like to modify your profile, click here."
Clicking the "Modify profile" just takes me back to the same message. Also I was having problems with Authenticate Email address didn't work and was giving the same message above I believe. So I waited a day to see if I would get a confirmation email with no luck
I've been reading for days on how to root/backup an LG K8 (2018) X210ULMG which doesn't seem to have proper support. So I have a long road ahead of me to figure out exactly how to create a custom TWRP, root the thing, RIP the ORIGINAL image off the phone (NOT Something similar.) So I need to be able to ask questions and get clarifications. So would really like to be able to make sure the whole site works for me, as I think I'm going to be hacking/researching this (hopefully carefully) for a while before I'm successful.

Question Caller ID Issue

After I've rooted my phone, I've disabled Show Caller ID(so that others can't see my phone number), and now I cannot enable it; It shows an error "Unexpected response from network" I tap Ok and another error pops out "Network or SIM card error".
I've tried to reset the dialer app and it changed nothing(about the error).
But one thing that I wasn't able to do is to locate directly where this setting is stored(in the directory), and it has something to do with my phone number, since whenever I use a different SIM it enables Caller ID; While still being unable to access the setting itself -- uses default.
Or are there other ways to fix this?
Thanks in advance!
You'll need to talk to your cellular service provider to reset this if you see that error.

Categories

Resources