Blue Angel and WAP Push - MDA III, XDA III, PDA2k, 9090 General

Does anyone know how to make WAP push work on the Blue Angel. It appears that the device does not support WAP push.
Anyone know of any software that can make the device capable?
Thanks,

Related

T-Mobile uk MDAIII MMS Settings!

Hi guys, Could somebody please post MMS settings for an MDAIII on the T-mobile UK network. Much appreciated!
Setup the internet first with the following.
I can connect to the internet fine using:
APN: general.t-mobile.uk
username= user
password= one2one
Then setup the mms client as follows.
Server name: t-MobileUK
Gateway: 149.254.211.10
Server Address: http://mmsc.t-mobile.co.uk:8002
I use my XDA II in the uk and the states. Works like a charm. and I have T-Mobile! Let me know if it works for you.
If you want to use the cab just copy it to your device and run it

GPRS Settings for CIngular on Siemens SX66 ATT Variant

I recently updated my SX66 m to v1.4O. My SX66 is an ATT variant so I followed the instructions from Blue Angel. I am on the Cingular network and and am having difficulty connecting to the internet. I have checked the settings and everything appears to be correct. Does anyone have any ideas?
THanks
Copy this cab to the device and run it! Enjoy!
Mike
Does this just allow access to plain ol' vanilla MEdia Net, or does it allow access to the mMode homepage that AT&T used to have?
Um it says cingular. so um no Mmode at&t. If you want the gay Mmode change your home page.
There are two types of Access points for Cingular. If you have a "data plan" with them, usually for access to DUN or a dedicated data service like GoodLink, you want to use the ISP access point. If you're just trying to browse the web, and you have a pay per use or small intnernet, you use the WAP access point. If you don't have a plan for ISP it won't work - you should try WAP first. Here's the info:
Start > Settings > Connections tab > Connections Icon > Manage existing connections under MEdia Net
Select the existing Access Point and click Edit
On the wizard, select Cellular Line (GPRS) for your modem
For the next few pages you specify either the WAP or ISP access point. *cAsE does matter, you need to specify usernames and passwords in all caps*:
"WAP" APN:
Access point name: wap.cingular
User: [email protected]
Pass: CINGULAR1
"ISP" APN:
Access point name: isp.cingular
User: [email protected]
Pass: CINGULAR1
That should do it. save your changes at the end of the wizard and try connecting to the internet. Questions: josh AT pinwheeltech [NOSPAM] dot com.

WAP Browsing Black 2.5

Guys,
Since upgrading to Black 2.5 I've found a problem with WAP browsing with Internet Explorer which was not present with Black 1.2. So for example, if I try to connect to WSP://wap.mysite.com my connection is blocked by my operator (They only allow connections via port 9201 and 9203 on their WAP APN). I've correctly set-up a proxy on my device to use port 9201 for WAP and 9203 for Secure WAP and so I believe IE is probably using the wrong destination port.
Has anyone else come across this problem? Any workarounds/fixes? Maybe a registry change somewhere??
Cheers,
Tony
Does your network use a different wap apn?
I have had a similar thing happen with black 2.5
I have entered in all the details for the carrier.
I have tried with and without the proxy. I have also tried the 3G and GPRS APN's and they all time out.
Its not a big deal to me as most of those WAP sites supplied by carriers are not worth looking at anyway.

MMS settings for Orange UK

Hi guys,
I can connect to gprs so I'm guessing all the settings are right for that, but I can't sent mms. Here are the settings I'm using:
Orange mms
192.168.224.10
8080
http://mms.orange.co.uk
Connect via GPRS
300k limit
Wap 2.0
Please help!
ethos84 said:
Hi guys,
I can connect to gprs so I'm guessing all the settings are right for that, but I can't sent mms. Here are the settings I'm using:
Orange mms
192.168.224.10
8080
http://mms.orange.co.uk
Connect via GPRS
300k limit
Wap 2.0
Please help!
Click to expand...
Click to collapse
Take a look at my cab file for Orange UK - MMS works fine using this
Orange UK by rabdo v1.6.cab
Ornage SPV M3100
Hi thanks for settings worked great updated my SPV to WM6 yesterday and have been struggling to get MMS working as have had two messages waiting all day again thank u for a wonderful Cab file

MMS settings on TyTn/Hermes for Suncom

I am sure that this has been posted already, but I have not been able to find my answer yet.
I am trying to get my MMS settings to work with suncom's service, here is my problem i think?
Suncom uses port 9201 and WAP 2.0 - when i set to port 9201 i get a default of WAP 1.2 and when I set to WAP 2.0 I get a default port of 8677.
Can someone please tell me how to change the port settings on the Hermes running WM5....I also have the same issue with an S710 running WM6.
Thanks in advance for your help.

Categories

Resources