Related
Hi everyone... I am new to the PPC world... being just recently swatch from my Treo600 to a new XDA2s, I am having a little difficulty getting used to the Microsoft way of doing things in PPC2003... I am just wondering is there anyone who can help me or point me to the right direction where I can get some external program that can help me from going insane... here's my problem... I usually keep a huge contact list with all my customer, supplier, co-worker, family and friends contact all in my PDA... so the usual way for me to make a phone call is to search it from the contact list... but here's my problem, I travel alot with my job and depending on my current location, I have to edit the number in my contact before I dial the number... in my old palm, I can simply edit the number before I dial that number (there's a funtion on my palm that allows you to edit before call... so it allows me to edit the number without physically changing the number in my contact list)... I am just wondering can PPC do that? Or is there any program in PPC that will allow me to do that? As far as I can see... in PPC, as soon as I have search for a contact and then I click on his or her number with my stylist... it will automatically dial... I can not edit it before I dial... the only way I can edit it before I dial is to physically edit the contacts... which is very annoying as I sync my contacts with my exchange server, I don't wanna to have to have all my contact get mess up with different area code and dialling code from different country... anyone know how can I solve this problem? Thanks for your help in advance... I very much appriciate all of your advice in advance... Peter
I think the most straightforwards solution here is to store all of your numbers in the international dialling format; that way, wherever you are, your device will place the call correctly
For example - if I had a contact in Glasgow, UK, it would be stored as +44141xxxxxxx (+44 for UK, 141 for Glasgow and the remaining seven digits as the local number)
In my experience whenever I have been abroad, any calls to any of my stored numbers are placed correctly first time by either my SmartPhone or PPC.
If you're problem is regarding a slightly different issue then please expand on your problem by detailing what you mean by "modifying" your contact before you dial.
My problem is a little bit more complicated I think... I already has most number stored in the international dialing format... but my problem is that, depending on my location, I have to dial a certian set of numbers in front of the phone number to be dial in order for me to save on long distance and roaming... for example, while I am roaming in Mainland China if I want to dial home in Hong Kong with my mobile... normally, I will dial 0085226****88 but that will cost me like USD2 per minute... but if I dial with a prefix of 17909 (hence I will type in: 179090085226****88) then my per minute charge will now be something like USD0.10 per minute... which is a huge saving especially when I make roaming and long distance call all the time... the same thing in Hong Kong, if I dial 1666 before I dial long distance, I will get a much higher savings over regular long distance... my problem is that I can not possibly store all of these information for all the locations that I am going to be in, each places that I am going to be in, have a different sets of number... so is there any intellegent way to add additional numbers in front of the number stored in the contacts before it is being dialed in pocket pc? I know on my old palm... I can solve this problem in two ways... 1) I can set a certain dialing prefix before the system dial any number (normally I leave that blank, as I prefer edit before dial function)... I can use this prefix function but it will require me to change the prefix when I am at a different location but it is a workable solutions... is there something like that in PPC? 2) The second way to solve this was the edit before dialing function on the palm... I just click on the number, it allows me to edit the number temporary before it is automatically paste onto the phone software and before the phone dials it...
Anyway, I know this is very complicated and it is a very rare issues thats probably just affecting me or a very small number of users... but it will be great if there's some simple solutions to this... but I think this problem is mainly due to the lack of flexiblilty in the contact list rather then the function of the phone itself! :O) Anyway, thank you very much for your help and suggestions again... very much appriciate it :O) Peter
Try if this works
http://www.handango.com/Platform ... sp?productId=152403
Can you please post the link again? It doesn't work :O) Thanks for your help :O) What kind of program is it? :O)
here's the link
[url]http://www.handango.com/Plat...Type=2&catalog=0§ionId=0&productId=152403
[/url]
you got it all wrong
... if you ask me: your approach is wrong. Here are the basics. Windows XP, for instance and Outlook, that is the source of the contacts (and phone numbers and other details that are entered), stores phone numbers in this 'international' format:
country code (MS has a list of countries and codes of its own)
are code (another, separate field) and
number
If you respect the fields provided by Outlook then you get a number generated by Outlook that looks like this:
+381 (064) 6185250
THIS is the 'correct' international format recognised by Microsoft Phone Dialer (well not actually MS but Active Voice, but that is a completely different issue)
My point is that +448704364673 is NOT a correct international phormat, because MS cannot differentiate between the international country code and long distance (area code) and therefore the phone dialer cannot parse the numbers correctly.
NOW, how to get the system to know WHERE you are and should it use the area code when dialing or you are in the area your friend is, or you want to call a toll free number that is in 'another' area, or you are dialing a client abroad etc. Well, there is the 'Dialing Rules' settings! THERE you create a profile (home, office, abroad etc.) and provide the area code for the dialer to differentiate...
This is all well with the Windows XP/Outlook 2002+ I know well, BUT when it comes to PPC... sorry, I have the same problem...>
FACTS:
fact no. 1: Outlook separates phone numbers in groups of>
country code
long distance code (area code)
number
fact no. 2: phone numbers entered this way are stored in a format>
+381 (064) 6185250
fact no. 2: Microsoft Phone Dialer recognises this number and dials correctly
via a voice modem... (headset or speaker/mike required)
Question: what hapens when contacts entered this way into Outlook are sunchronized with the
Pocket PC (Windows Mobile 5.0)?
Answer : all contact's numbers are entered into the Contacts list in the 'correct' format.
(the same format with the bracket, as is noted in PC Outlook)
My findings: the problem arrises when you use your mobile capable Pocket PC
(i.e. the super cool Qtek 9000) and try to dial someone on to his mobile or office phone that are on another
area code...
the Pocket PC, or Windows Mobile 'Phone dialer' dials EXACTLY
as the number is entered in the above mentioned format
(the mobile operator recognises the + at the beggining of the number, but
does not understand the spaces and the brackets!!! and offcourse
the mobile operator returns an error voice message that a wrong number has been dialed!
What am I to do?
Can I find/download/install a proper phone dialer (i.e. MS Phone Dialer) that comes with Windows?
Phone Dialer 1.5
Developed for Microsoft by Active Voice
http://www.activevoice.com/dialer
bottom line is that CISCO systems aquired this Phone Dialer in 2001 and Active Voice discontinued developing/supporting whit app. (link on the Active Voice site is outdated and no support on MS site, as well)
(please do not post solutions as: "you should reformat your number entries etc. because I have 800+ contacts and counting...)
P.S. what I gathered is that this is not device related it is just OS and app related. I had the same problem with my previous Nokia phone... (I did not solve. Actually I thought I will solve with this device...)
I've set the Dialing Rules with my country code and area code (Mobile etc.) So, I don't have a clue what am I doung wrong
THis may be a newb question, and i had it set up somehow while running WM2003 but i cant seem to remove the brackets on the numbers that are calling me, so i have to redo about 400 contacts just so that i can get their name on screen while they are calling me
Example:
The phone now whenever someone is calling me it shows (697)6767676 and i want to make it 6976767676,
Help!
dont fret and worry about it...
it's just a display (it's hardcoded in Windows to show the first three in parenthesis) ... the real numbers dont have the any special chars aside from p w +, et. al.
Yes i know its only a display thingamajig, although whenever i get a call from someone it wont show me their name unless i have altered the actual number with so that it contains the brackets in the contact itself :S
dumraden said:
Yes i know its only a display thingamajig, although whenever i get a call from someone it wont show me their name unless i have altered the actual number with so that it contains the brackets in the contact itself :S
Click to expand...
Click to collapse
None of my contacts have ( ) stored in their numbers, The format I used is +country_code number and every time someone calls me with or without the country code showing it displays the name that corresponds. Example: I have have a contact named Fred Murphy with the number +965 1234567 when he calls if I am in Kuwait it shows only as 123-4567 if I am overseas it shows as +965 123-4567 both times I see his name Fred Murphy on my screen. It has always been this way for me no matter which version of windows I have run. I was not aware that it worked any other way.
You have to choose your regional settings correctly and it will disappear.
settings > system > regional settings.
JP
or
check for duplicate phone number entries...
even though you have the name in the sim and the phone, the phone cant decide which name to show, so our phone shows only the number.
I have been using touch 4.01 for a while now and I really like it. The only problem I have is when it comes to making calls (the main reason for a phone).
When I go to contacts and try to display a list, all I get is a list of contacts that I have already made a call to (i.e. history) not the actual list from my sim card. I thought that maybe my sim was not being read but when I start to dial a number (If I happen to know it) It will come up with the persons name. Unfortunately If I don't know the number I can't dial them.
The only way I have been able to work round this is to go to favorite people and add a new person (as from here it will display the whole contact list). Unfortunately favourite people can only hold 8 numbers.
Basically I want to know how to show my contact list that is on my sim card and not the numbers I have already dialed.
Thanks in advance but It's really starting to bug me now.
Khalid
May U run SIM Manager in Program/Accesories and copy all contact to Your PPC or run Advanced Config in Settings, line "Show Sim Contact" and active "Yes" and Reset your PPC.
Goodluck
Anyone knows of any utility that will allow me to edit a phone number before dialing? For example, when in my home country, I need to dial a prefix of 1551 while in overseas, I need to dial *121*xxxxxxxx#. I can't do it easily now unless I create multiple repetitive phone numbers with different dialling prefix. Thanks.
Try Magicall.
www.mobiion.com/magicall.html
hi im looking for the same software i was using sony ericsson and nokia and they all had this function taking a dialled number and then edit it before calling i think magicall wont do it for me there is so many stuff to do. just wonder if there is a simple way of doing this as in editing a phone number or saving a number option
dont know if i make myself clear enogh
guid2002 said:
Try Magicall.
www.mobiion.com/magicall.html
Click to expand...
Click to collapse
Thanks. I just needed a simple utility where I can opt to manually change the numbers before I dial. For example, numbers are stored in my contacts with the country code: +62 XXXXXXX. While roaming, I just need to prefix *121* followed by the country code (without the + sign) and number and append a # sign at the end.
Hello,
I been searching to figure out how to add a pause between phone number and conference ID/extension. I've tried adding a comma (,), "p", and period (.) without success. Tried by adding this to a contact's phone number - such as 555-555-1234pp123456# or 555-555-1234,,123456#, etc.
Does anyone know of a solution? Is this a limitation in Windows Phone in general or is this OEM specific?
Thanks for your help.
Add the contact using Windows Live, Outlook, or however else you can add commas and still have it sync, then it works.
ie:
mobile phone
(800) 555-8355 ,2548
Add more commas if needed.
Is there anyway to add pause to voicemail number ? i hate entering the password everytime ..
trueblog said:
Is there anyway to add pause to voicemail number ? i hate entering the password everytime ..
Click to expand...
Click to collapse
Before you do this, read the Last Paragraph.
1. Go into your settings and then Phone Settings and write down your Voicemail number. Be sure to copy it exactly, including spaces.
2. Open Office on your phone and start a new Word Document. Type your Voicemail number exactly as you saw it.
3. Add a p after the number and then type your password. Now, highlight and copy this new number.
4. Go back to your phone settings and paste this new number including the p and password.
5. Back out and see if that worked. If you have any trouble, put the old number back into phone settings.
I'll change numbers so you don't have mine, but here's an example:
+1 (415) 497-1234p1234
This works on ATT. We also have an option to bypass password completely within the Voicemail settings menu after calling voicemail. On ATT it's option 2, then passwords, then turn off password.
Hey what i did was just type the number in a text editor and pasted to contact detail.. it worked