Hi
I use a Nokia HDW-3 headset with the latest BT ver " 1.0.0 Build 3900 ". They are able to connect to eachother easily . There is no crackle in voice also.
But the problem starts when the phone switches off " stand by mode " , I hear two beeps in the BT Headset and then it disconnects .
If I get a call within this period the PDA rings and I see a headset with "?" in the middle and then after 5-7 seconds the headset wakes up.
This is nt a problem with HS as I have checked on a Nokia Phone..
Anyone else facing this issue....any possible solution.
Regards
Dhruv
Deleted same thread and text out of the BA upgrade section.
Related
Please help me out I'm incredibly frustrated with this thing. I recently got the PDA2k and installed WM05 on it. It looks very nice and it runs speedy with no problems. My problem is the bluetooth which is huge thing to me. Either my headset (Tekkeon Eztalker Mini) is not compatible which I doubt or I'm making a stupid mistake.
This is what I did step by step: I click on the bluetooth icon and turn on the bluetooth, I then put my headset in pairing mode and the imate is able to recognize it and I enter the Pw and I put Set as handsfree. That's it, I would think I would be done at this point yet nothing happens, the headset doesn't do anything and I know its not Tekkeons fault because I was able to hook it up easily with my HP 6315.
So what's going what am I missing?
Also theres a tab at the bottom called "Com Ports" but I only see under this option "Incoming Port", and the description at the top says there should be another option called "New outgoing port". Does this have anything to do with it?
What Am i doing wrong? It's driving me crazy I can't really use the phone without the headset.
help me out pls
Bluetooth
I know the feeling, i have gone back to 2003 cause of that but now i am back on wm5. The bluetooth issue is not fixed yet, it is not stable, it keeps going off. There is a suspend cab file, but it does not work for me yet, also try pokect zen beta. You might get a longer period of bluetooth
thanks for responding, but the problem is not that it suspends or stops working. It doesn't start working at all even though the imate detects it. It's like it's not connected at all, not that it disconnects. I'm doing something wrong I just don't know what.
The bluetooth piece is not faulty and the unit is practically brand new. whats going on?
I used "Display Switch" binded button (From Wisbar Advance 2) or "Toggle Screen" (From SPB Pocket Plus) to turn off the backlight instead of using power button .
This work around will keep bt connection alive.
Note:
1. If you suspend your BA using psShutXP your bt connection .
2. You have to disable auto turn off device under Start -> Setting -> Power
Note:
1. If you suspend your BA using psShutXP your bt connection will be disconnected.
I'm sorry I'm not sure I'm explaining myself correctly. I understand that if the power goes off I will lose the BT connection but the problem is not KEEPING the connection alive, the problem is MAKING the connection. I follow all the steps , the imate recognized the headset but I'm not able to use it..also shouldn't a headset picture show up at the top of the screen when the bt headset is connected (cuz mine doesnt). what am i doing wrong?
thanks.
still need help please.. if someone can walk me through how to setup a bluetooth connection that would be great cuz I apparently haven't done it right.
The headset icon only shows in Phone app
The headset icon only shows up in the Phone application. It no longer is displayed in the notification area (top row).
If your device is paired up, when you make a call, you will see the headset icon in the top right corner.
You may also need to clear any old pairings that you headset has. I have a Jabra 250 and it happens all the time.
there we go you have solved my problem!. I didnt' have to open up the phone application on my hp 6315 to use the bt. So wait can I listen to music with windows media player through the bt headset or does it only work when making phone calls? I was able to listen to music on the HP 6315, is it different with the Imate or is it the NEW 05 os? Please enlighten me
thank you thank you
also one other thing does this mean that if i want to use the headset with the phone that I have to press the answer button on the imate rather than the headset..cuz that would suck big time.
what about when people call me can i answer with the answer button of the bt headset or no?
It works fine with the headset button for answering or hanging up.
Later.......... 8)
droy001 said:
what about when people call me can i answer with the answer button of the bt headset or no?
Click to expand...
Click to collapse
Hello Everyone,
i am a proud owner of the S9 bluetooth headset and it worked very well at the beginning (1 day). Than i deletes 2 registry settings as mentioned in a forum somewhere (max bit pool stuff) to get better sound quality.
I dont know if it is the cause of the problem i got now but next day the S9 was gone in the bluetooth device list of my touch dual and cant be found anymore. the strange thing about it is that if i press the telephone button on the S9 the ms voice command icon appears and i can talk to it. also the touch dual seems to use the s9 as headset as the ring tone volume is switched to zero and the headset icon appears in the calling screen (after pressing the send button)
anyway i am not able to conect the s9 for music transfer and that is the problem if got..
any chance to delete the touch dual in the s9 settings so it allows a repairing? or somehow recovering the appearance of the s9 in the device list of the ppc?
any suggestions are welcome.. nice sunday everone
Edit:
Problem solved.. dont know how but the pocket pc found the headset finally again..
Glad that it works again for you.
I have a Blueangle with WM 6.1 and the S9.
Can you get yours to play music and have the display off (not dimmed but off). I have found a device lock that works fine while BT is off however when BT is on and connected to the S9 it always wakes up the screen.
What Version of WM are you running ??
Oops, sounds like my yet-to-be-solved case.
What I have: Qtek 9100 and Jabra BT250v. Some time ago I also deleted this partnership (don`t ask why) and when tried to re-establish it again, the device kept declining the connection with the headset. The device finds the headset, asks for a password and whatever combination of digits I enter it rejects to establish a new partnership.
I guess, the problem is in registry. Anyone could help with this one? What should I fix in a registry to re-pair the headset and device? Thanks in advance.
Ok in case anyone else got that problem i guess i know what it caused: i paired the bluetooth headset with my laptop after pairing it with the pocket pc. and although no service could be used (ms bluetooth stack) the S9 didnt use the PPC as standard music device but the laptop. after deleting the pairing from the laptop the S9 i could pair it to the ppc again.
about MDAIIIUser's problem: dont know any way of listening to music with the device turned off. i use AE Button to switch display off by double cklicking the green button or starting S2U2 by double clicking the red one. anyway, if display is switched off and i press a button on the bluetooth headset the display turns on again thats why i just lock the device and dont care if the display is on for some minutes in my pocket..
Hi all, I have a new Bluetooth headset h680 which I have paired with the desire, its connected and when on a call the person on the other end can hear me but I cannot hear them....anyone have a similar problem?
No, but only tested Plantronics 975. which works fine.
I Have a problem with the bluetooth as well. The connection and pairing are OK but there is no sound coming out of the headset.
I've google it and it seems there is a general problem with the bluetooth audio.
I also have a bluetooth problem.
I paires with my car kit (jvc kd-r711) and after a few seconds i get a error saying "headset disconnected"
I've read similair problems since the froyo update. Anyone else have the same problems?
@johnsten
Yes, I have the same problems with my Volkswagen Golf 6 navi!
At first, the phone connects just fine. No problems at all. Made several calls, phone book is synced automatically. All fine..
But then after some time it gets bugged. When I tart my car, and the systems sais.. phone connected. My desire sais "headset connected", and after some seconds it says "headset disconnected". The Bluetooth connection remains active, but the phone is not in "headset" mode.
The only thing that really seems to fix this problem is a full system swipe, but then I lose all by programs and Angry birds savegames
I really want to get rid of this problem. Any ideas?
Grtz, Ron
similar to jah, only tested the plantronics 975, never had issues
also working well with my Jabra Extreme so far
no problems with Nokia BH-503 and SE MW600
No problem with my SE MW600 either, for 340 SEK (36€) it has everything I need: volume, back, play-pause, forward and mic
No problem with either my JVC-901 car head unit or Sony Ericcson HBH-980 stereo headset
ford focus bluetooth headset issue
Hi there, I have a problem with the desire and Bluetooth with my Ford focus.
It pairs fine, but looses connection after about 45 seconds. If you check a task manager you see the Bluetooth process at very high CPU after the disconnect, for a number if minutes.
If you make a call before the Bluetooth drops out it remains connected for the duration of the call !
Tried disabling WiFi etc, makes no difference.
Any ideas?
silvermeanie2412 said:
Hi there, I have a problem with the desire and Bluetooth with my Ford focus.
It pairs fine, but looses connection after about 45 seconds. If you check a task manager you see the Bluetooth process at very high CPU after the disconnect, for a number if minutes.
If you make a call before the Bluetooth drops out it remains connected for the duration of the call !
Tried disabling WiFi etc, makes no difference.
Any ideas?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=731626
I had just the exact problem no problems any more though after this fix I dont know if it was a bad rom flash that screwed something up for me but BT works great now
I have the same problem, bluetooth paired but can not hear anything. I tried over 10 different, but it does not help. Can anyone solve this problem?
I'm having a similar problem with my car stereo & HTC Desire bluetooth connection.
I have a Silvercrest stereo with blutooth which worked with my provious Nokia & Blackberry but cannot get it to work with my Desire (2.2 Froyo)
The 2 devices will pair but when I try to make a call or receive a call the devices disconnect.
I am not at all savvy about flashing ROM's or anything so as simple a resolution as possible please...(& no, changing my car radio is not an option )
Any info is greatly appreciated as I spend a lot of time in the car & need the hands free
Bluetooth problem
saayinla said:
Hi all, I have a new Bluetooth headset h680 which I have paired with the desire, its connected and when on a call the person on the other end can hear me but I cannot hear them....anyone have a similar problem?
Click to expand...
Click to collapse
I have a Pioneer 7100bt car radio and a Desire with Leedroid 2.2f and i does the same.
Does somebody know a solution??
I too have a H680 and like you, callers can hear me however, I can hear them but very quietly even with volume full up.
I also have a Jawbone 2 where I can hear callers but they cannot hear me very well.
The Jawbone 2 was fine with previous handsets.
No solution though, sorry.
hi, I do have this prob when connecting to my nokia BT headset. Its a new model.
but it only happens lately that it wil disconnect and reconnect say every 15 secs.
And this happens EVERYTIME when I connect. I hv not tried othe BT headset though.. BUT is this a known bug for HOX or any of you has got the same issue?
Very irritating when your driving as you won't know when the next call comes in, your BT connected ornot. Any idea why my friends out there?
vanngoh said:
hi, I do have this prob when connecting to my nokia BT headset. Its a new model.
but it only happens lately that it wil disconnect and reconnect say every 15 secs.
And this happens EVERYTIME when I connect. I hv not tried othe BT headset though.. BUT is this a known bug for HOX or any of you has got the same issue?
Very irritating when your driving as you won't know when the next call comes in, your BT connected ornot. Any idea why my friends out there?
Click to expand...
Click to collapse
Don't have this problem.I had problems with the navigation system on my car but i solved it by factory reseting the car's navi.
Hello ! I recently both this android media system for my car : stopshop.co.za/navigation-vw-polo-dvd-gps-satnav/4047-android-vw-polo-navigation-a9-quad-core-3g-wifi-gps-dvd-bluetooth-radio-dsp-obd.html
so i have two issues with him that i can't resolve by my self :
1 : Related to buttons light : in the options there are only 2 positions about control the light of the buttons
a: in dependence of time (lights on at the night / and off at the day )
b: always off .
My question is : how to make them (the light of the main buttons) to be allwasy on ? i tried some aplication from playstore related to manage of buttons light, like :Galaxy Button Lights and others , but they did not work .
2 : Related to bluetooth calling using cms : I have a strange issue related to phone calls using cellphone connected via bluetooth to the cms . The thing is that i can listen music over bluetooth using cellphone conected to the cms , but when the call is made there is no sound at all , i mean the call run well , but there is just no sound , but if i just play a song using same cellphone and same connection there is no problem , all sonds good ....
I contacted the seller about this issue and he say that may be because , when the call is made over bluetooth the sound is played only by the front speakers so they must be connected directly to cms , but the thing is that my front speakers is connected over amplificator to the cms as the woofer , not directly , so i have no idea how to resolve this problem ... maybe something can be changed in the os that will permit the bluetooth call to run over all speakers or over amplificator to recognise him , or maybe some other tricks to resolve that , or maybe you can suggest a better way to connect the speakers to bypass this issues ?
Thank you in advance !