Is anyone able to send files from their BA via BT? - MDA III, XDA III, PDA2k, 9090 General

If so please could you tell me what ROM and BT versions you are running.
Thanks.

No, not with standard file explorer.
with "MC" it works fine.

MC? Whats that?

Sorry ment TC
Total Comander

Pimbo, are you sure you mean Total Commander - v2.0 freeware from www.freewareppc.com/utilities/totalcommander.shtml?
I've just downloaded and installed it and I can't see any option anywhere for send files by BT, just IR.
Cheers
JT

BT transfers with Resco Explorer 2003 works fine on my 2s!! :lol:

BT
I have no problems sending file just klik in file explorer en send them bt
rom version 1.40.00 wwe
Rom date 03/10/05
Radio version 1.13.00
Protocol 1337.42
Ext Rom 1.40.556 WWE

Little mistake...
i try;d it again, and is possible to do it whith no need of Total Commander.
If your bluetooth is on, you go to your bluetooth manager.
You need to have the devices paired.
if you are paired with a device you go to its mediacard or documents, many more phone specific.
So if i go to one of his folders and found in the menu (left downside) a button send file.
than i select a file, its a bit messy in this menu but you should be able to find your file to send here.
Once you Click your device sends the file to the other device.

i think this...
Well just to make things more simple just install/upgrade to bt build 3900 and in file explore you can tap and hold the pop up menu will help you send any file/picture to another bluetooth device
it that simple
I have done it as I had only build 3500 from the company as default

where can i find the Bt build 3900??

Related

PDA2k; how to send file via Bluetooth

is there a way to send files through Bluetooth on PDA2k??
I have the same problem also, I can only send business cards and appointments.
PDA2K Bluetooth File Send
hi guys
just got my pda2k i use resco file explorer and there an option there now'just sent a video clip to my pc and it worked here the cab file its the lastest version as i dowloaded it last night---its a demo
Hope it helps
freelockuk
i have downloaded ur attached version of resco explorer and tried it; i have also tried various versions of Resco Explorer with different bluetooth devices (phones, PDAs, PCs etc) but i always get the following error:
"the connection to the peer bluetooth device failed"
the beam file screen doesn't seem to work..in resco explorer it works, but the devices must be paired crap..
have you paired them both first?
that's the point..u shouldn't be required to pair the devices, like nokia phones, u can send files without pairing..
Besides, using default file manager and chosing beam file doesn't work at all...bug?
yes they are paired, but still the file doesn't get beamed from PPC to PC
this sure is a bug or a limitation of Bluetooth in PDA2k.
to send to the pc you must go to bluetooth manager->new->Browse files on a remote service, then chose your pc, and select send file.
What i want to know is that if we can send images and other files using object push (like the 9090 does for contacts, appointments and tasks), i.e., without requiring the pairing of the devices
d3vil said:
to send to the pc you must go to bluetooth manager->new->Browse files on a remote service, then chose your pc, and select send file.
when i try this, it says: "Service Discovery was unsuccessful".
What i want to know is that if we can send images and other files using object push (like the 9090 does for contacts, appointments and tasks), i.e., without requiring the pairing of the devices
Click to expand...
Click to collapse
my imate PDA2k doesn't even send contacts, appointments and tasks using object push. it can't find my PC in 'Object Push Servers'. and when i select all devices and chose my PC it gives me the following error: "The Remote device does not allow contact items to be received".
is it because of XP SP2???
how do i enable Object Push Profile in XP SP2?
Guys, I can send files over BT from my Qtek-9090 to my friends iPAQ 1940, no problems at all !, well try this version it might help.
@FFVIII: I haven't tried yet to another ppc, but using resco explorer it fails sending to the pc..
OK, My Problem IS SOLVED!!!!!
i uninstalled XP SP2,.., back on the Widcomm bluetooth software and everything works again, PC to PPC or PPC to PC.
will check it now again with other PPCs and Phones.
problem in Beaming(ing) using i-mate PDA2K
I am using i-mate PDA2K with Windows 2002 but I couldn't send any bluetooth
message so far?
i use the file explorer to browse the vailable bluetooth devices near to me
but it's just showing Searching and nothing happens after that?
what is the problem?
problem in Beaming(ing) using i-mate PDA2K
I am using i-mate PDA2K with Windows 2002 but I couldn't send any bluetooth
message so far?
i use the file explorer to browse the vailable bluetooth devices near to me
but it's just showing Searching and nothing happens after that?
what is the problem?
Sending via Bluetooth
unfortunatly MS have decided to make a massive change with the bluetooth stack on MS Mobile 2003. you can no-longer beam files via the explorer app or the beam files app. The way i've transferd file is to establish a file browsing session via bluetooth manager and then select send file. Unfortunatly this does mean the devices have to be paired and support tftp over bluetooth, but it does work. Im yet to test resco but will post when i do.
imate will lanche new update to fix this problem
now 4 updates in 2 month !!! thank you imate for pda2k
Widcomm bluetooth
buchay said:
OK, My Problem IS SOLVED!!!!!
i uninstalled XP SP2,.., back on the Widcomm bluetooth software and everything works again, PC to PPC or PPC to PC.
will check it now again with other PPCs and Phones.
Click to expand...
Click to collapse
where can i download Widcomm bluetooth software? or any link? thanks
buchay said:
i have downloaded ur attached version of resco explorer and tried it; i have also tried various versions of Resco Explorer with different bluetooth devices (phones, PDAs, PCs etc) but i always get the following error:
"the connection to the peer bluetooth device failed"
Click to expand...
Click to collapse
Hi there,
I encountered the same problem like u. I got this message everytime i send file to another ppc via resco explorer 5.13(latest). But sending file to PC desktop is ok.
So my question is can u successfully send files to ppc , phones & pda?
But how??
Thanks
Check out this thread: http://forum.xda-developers.com/viewtopic.php?t=17976&highlight= it might be just what your looking for!

BLUETOOTH

Hi Everybody,
I have an xda11 and have upgraded everything BUT i just cant get the bluetooth running properly all the time. could someone suggest something other than the obvious. I really screwed up my phone with bluetooth tools and their must still be something in the registry that is affecting my bluetooth. I have a hello2 headset which is fantastic. The problems really started with bluetooth tools. I have done several restores from my card but i think the problem is in the registry............anyways i love gadgets and you guys are the bomb.
ROM VERSION 2.06.00WWE
ROM DATE 06/14/04
Radio Version 1.18.00
protocol 1337.38
extrom version Sin.Merged v2.0
Hiya
Can you provide a few more details? Eg..
What OS?
Have you done a hard reset to refresh the device and still having BT issues?
What version of BT Tools did you install?
What exactly the issue with BT is: it stays on for a minute and then turns off / doesn't come on at all / any error messages?
Cheers
Ant
Thanks for responding
The operating system is
WM2003 second edition
version 4.21.1088 build 14132
Done a hard reset
The version of BT Tools was 1.1 (i think) but i did remove it.
and yes it stays on for a minute or it doesnt answer but it knows its on.
I just think ive screwed something up in the Reg. I have spb 2.5 , and a heap of programmes on it.
When doing a restore from my storage card - do i have to restore registry otherwise it would leave the "working" bluetooth after a hard reset.
I dont get any error messages-it just has a mind of its own. Also i cant answer another call while im on a call.
Sorry to be a pain..........if there is a BT stack i can download to overide this one-that wuld be cool or can someone tell me what dll's to delete so it fixes itself up????
Thanks again for your quick reply
Thanks for responding
The operating system is
WM2003 second edition
version 4.21.1088 build 14132
Done a hard reset
The version of BT Tools was 1.1 (i think) but i did remove it.
and yes it stays on for a minute or it doesnt answer but it knows its on.
I just think ive screwed something up in the Reg. I have spb 2.5 , and a heap of programmes on it.
When doing a restore from my storage card - do i have to restore registry otherwise it would leave the "working" bluetooth after a hard reset.
I dont get any error messages-it just has a mind of its own. Also i cant answer another call while im on a call.
Sorry to be a pain..........if there is a BT stack i can download to overide this one-that wuld be cool or can someone tell me what dll's to delete so it fixes itself up????
Thanks again for your quick reply

Orange UK SPV M2000 ...send file via BT

Folks
Can anyone tell me what I must do to send a file from my Orange UK spec. SPV M2000 to a.n.other phone via Bluetooth? I can't seem to find any options on the device for doing so.
Is there an update or any software I need to install to provide this functionality?
On mine I go into File Explorer, click and hold the file to get the popup menu and choose 'Send via Bluetooth'.
Worked sending some ring tones to my wife's new Nokia.
Hi i had the same problem with my m2000 theres 2 things u can do "extreme" flash it with say O2 software
or search the web for resco file explore download this and you will be able to send files via bluetooth PM if you would like more info on resco that can not be posted in an open forum
Hi i had the same problem with my m2000 theres 2 things u can do "extreme" flash it with say O2 software
or search the web for resco file explore download this and you will be able to send files via bluetooth PM if you would like more info on resco that can not be posted in an open forum
forza said:
On mine I go into File Explorer, click and hold the file to get the popup menu and choose 'Send via Bluetooth'.
Worked sending some ring tones to my wife's new Nokia.
Click to expand...
Click to collapse
Guys
Thanks for your replies.
Forza, can you tell me what ROMs you have installed on your M2000 and how old it is? I'm wondering whether Orange either disabled it or added it on later versions.
There was a thread on another Pocket PC site that suggested that Orange had disabled it on the M2000 in order to get more revenue from data calls.
N2h, Resco is a bit too pricey for me to consider at the moment so I guess I'm looking at a ROM flash if I can make sense of what I've got to do from Wiki.
Forza, can you tell me what ROMs you have installed on your M2000 and how old it is? I'm wondering whether Orange either disabled it or added it on later versions.
Click to expand...
Click to collapse
Sorry for the late reply - been on my holidays
I've got the 1.40 ROM on my phone.

Voice Command 1.5 with the New ROM

Has anyone sucessfully installed MS Voice Command 1.5 with the New ROM (Jasjar ROM 1.30.68 WWE, Radio 1.09.00, extROM 1.30.153)? It installs but when I run it I get an error message and it disables itself. Any suggestions?
Thanks,
Sven
I have VC working fine with the new ROM - installed and worked just the same as before, so does the reg hack to enable operation via BT headset...........maybe if you try it again (re-install?) it will work
works fine on mine.
@sbatxda I had the same issue, VC would just close itself...what worked was a simple soft reset, I only figured this out after pulling out all my nose hair but hey it's never to late to learn Just do a soft reset an it should work as normal.
sorry, i assumed a soft reset was a foregone obvious solution and would be done automatically by anybody that has any knowledge of any microsoft system.
if in doubt, reset
youmeus: it worked ok on the new ROM then? I'll try to upgrade soon I guess then..
V
MS Voice Command 1.5
Thanks for the suggestions. I have made the register modification to get it to work with my BT headset and I have made multiple soft resets. I have some issue with the Voice Command install in that I have to first install the 1.0 version and then the 1.5 version; if I go directly to 1.5 the install tells me that there is no previous version and stops. This may create some issue, but this is also how I did it with the previous ROM version. I'll try a re-install again.
Regard,
Sven
@vijay555, yes I tried it again and it works ok now...but this new rom has a few issues that I am not comfortable with so I am going back to old rom once I get home later
@sbatxda, the better way to install VC is vis the cab file...just look for the cab file on your desktop eg C:\Program Files\activesyne\voice command\...etc and drag the cab to your PPC.
MS Voice Command 1.5 installation
Thanks youmeus,
Installing the .cab worked better.
I'm now having difficulties installing the .cab file with my ISP settings. It will not install on my device or storage card. This worked fine with the old ROM.
Ideas anyone?
Regards,
Sven
BT hack reg
@adesonic
installed and worked just the same as before, so does the reg hack to enable operation via BT headset...
Click to expand...
Click to collapse
please tell me the issue about this or send a link in a thread. VC 1.5 doesn't work with my BT headset.
DTR - try this - copied from another thread on here
MS Voice Command activation from BT headset
Now this one is sweet and makes the JASJAR the daddy for voice commands.
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
Now, when you press your BT headset connect button, MS Voice command will fire up and take commands through the headset. It's reponses will be played through the headset too.
regs
sonic
@adesonic
oh, thatone I shure did try. But, having a Magician, I obviously had no success.
Maybe the fault is with the i-tech headset, which probably doesn't support connection.
I also had no luck with streaming audio to that headset, which some posts in other threads say is possible.
Thanx neverteless for your fast reply.
regards
Why haven't MS upgraded this software to a proper WM5 version yet?
OR have they and I haven't been paying attention?
Question: Earlier I and others have had problems with showing of contacts displaying a blank page.. Are you guys able to show contacts using Voice Command properly?
@eman, you have to add one the files form the VGA hack in your windows folder for VC to display contacts...I can't remember the name of the file so do a search on the board!
Great to know there's a solution.
Installing VC now
with the previous ROM there was the issue where it didn't work in laptop mode with the lid closed. Does VC work in that mode now, or are you guys using it in portrait mode?
It would be great if it did.
the file needed is outres.96.dll
no VC doesnt work when the clam is closed.
even on the latest release.

HOW TO: Rom Upgrade - Universal / XDA Exec

Well, this is pretty newbie advice to most of you, so you may think it doesn't warrant a write up, but I had to do some searching for info on how to upgrade my ROM so I thought it would be good to put it all in one thread.
1) Download the ROM you want from the FTP server....Details here http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
2) Download MaUpgradeUt_noID.exe to your Desktop from here http://forum.xda-developers.com/download.php?id=7644
3) Disconnect your device from the USB cable.
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
You will notice that the screen of the device is dark but has “USB” and "v 1.0" written on it.
5) Connect back your device via the USB cable.
6) Run the download ROM upgrade application...When it prompts you to begin the upgrade process, just minimise the window or leave it alone (DON'T CLOSE THE PROGRAM).
7) Whilst it is running, use Windows to search for a file named RUU.dll
8 ) Right click file and choose ‘Open Containing Folder’
9) Select all files and copy them
10) Create a temporary storage location....C:\Upgrade....And Paste all copied files in here.
11) Copy the file MaUpgradeUt_noID.exe from the desktop into C:\Upgrade
12) Close the previously started upgrade application running in the background
13) Run MaUpgradeUt_noID.exe from it's C:\Upgrade location
The upgrade process should begin now…If it does not, run the MaUpgradeUt_noID.exe application again
Make sure you DO NOT DISCONNECT the cable.
The upgrade takes around 20 minutes to complete.
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
Thanks.
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Mento said:
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Click to expand...
Click to collapse
It will go to USB when upgrading.
It doesn't seem to work with last Qtek 9000 ROM...
Help!
OK, I made my own instructions. Follow this instruction of mine:
The file is extracted in your computer. Once you run the shipped.exe file, you need to go to:
My Computer
Your Drive (mine is Drive C)
Show the contents of this drive
Documents and Settings
Choose your folder name
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
Now go to TEMP folder
Now you will notice a bunch of folders will show up, tons of them to be exact. What you need to do now is click on the shipped.exe file again and "LOOK" for the folder being created because that folder is what you want to copy. If you did not see it created, you have to manually open each folder and look for the files I listed below.
Assuming you found the folder, you will have these following files inside that folder:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
If the file MaUpgradeUt_noID is not there. You need to get hold of a copy of this file as you need this.
There you have it, REMEMBER, you need to have the MaUpgradeUt_noID file plus all the rest of the file if you want to upgrade to the ENTIRE I-Mate ROM, QTEK, O2, or whatever ROM you want.
If you only want to upgrade to the radio version then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf" alone and click on the "MaUpgradeUt_noID" file to initiate the Radio installation. Basically those 3 files control what you want to update on your device.
Hope my instructions were clear enough for you. Hope this helps.
cannot locate files after running exe
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Re: cannot locate files after running exe
SteveInUK said:
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Click to expand...
Click to collapse
Did you follow the instructions above on how to show hidden files and folders? After double clicking the .exe file and running it, leave it open then look for the NEWLY created folder in the TEMP folder as instructed. You need to look for it the hard way by opening each folder one by one and check for the files to see if you got the right one.
someone advised me for some extra step, someone please advise is it coorect steps:
"Then you need to make a small change to one of the text files. Look in the directory for
RUU.conf
Open it in notepad and add this line
[CHECKCEID_TYPE]=1
then save it
That’s about it….."
thx for reply christian,
yes i tried searching every folder the manual way but still no joy, I have just copied the rom exe onto my other computer and it worked OK on there and updated my exec without any further problems
Hi All, Linked to the update of the exec software , i noticed the audio playback on tom tom navigator and media files is very jerky to the point you can hardly make out what is being said. has anyone else had the same problem and have you found a solution to fix the problem ?
many thanks
Steve
Bricked QTek 9000
I got a Qtek on ebay and it was working when I tried to upgrade it failed with a "115" Radio Error.
Tried the method on this thread and it completes the upgrade but when I reset, I does not change from "USB v1.0" can anyone help!!!!
Hi
I'd like to take the risk for updating my Dopod 900 for new versions of ROM & radio, but I've got couple of questions.
1. I've got Dopod 900. I do understand, that it's absolutely the same with Qtek9000, but to be sure: may I use ROM update for Qtek?
2. My ROM (1.13.69) & radio (1.04.02) as of 10/12/05 are ancient What version of ROM & radio consider to be stable as of now? I saw in signatures that people using ROM 1.30.77 and radio 1.09.00. Are they OK?
3. I got on FTP and was a bit confused: as far as I understood the latest ROM is 1.30.100 (UNI_QTEK_130100_190_10900_ESN_Ship.exe), but it's for ESN (Spanish???) localization. So in order to get WWE I should use UNI_ORUK_13090_174_10300_WWE_Ship.exe and that update radio separately from 1.03.00 up to 1.09.00 or just UNI_QTEK_13077_176_10900_WWE_Ship.exe? What would u advice me?
4. What is the benefit for updating from 1.13.69 and 1.04.02? Will it works faster & more stable?
Thx in advance & take care
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Hi I have a Xda Exec
ROM: 1.13.82 WWE
Rom date 11/30/05
Radio 1.04.02
Protocol 42.37.P8
Ext Rom 1.13.188WWE
And when i do this:
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
The devide says me:
Boot options:
Enable KITL
Clean registry hive
Format storage
I soupouse that it isn´t the boot loader for go on with the proces... what happens?
I want to upgrade to UNI_QTEK_13077_176_10900_WWE_Ship.exe for use my heasphones motorola stereo... (AD2P..)
Can any body help me?
Thanks a lot
Please!!!
Edit post number 1 and add as the last step:
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
It seems that a lot of people are having trouble after a ROM upgrade by following the instructions on the upgrade program which tell them to hard reset.
Many thanks! PU10 by German T-Mobile upgraded to WWE
I have a T mobile mda pro, any recommendations as to what the best rom is.
Im torn between the new orange rom which is supposed to be good and the jasjar one?
Anyone?
Latest jasjar ROM
Hi,
Can I follow these instructions with my UK jasjar?
Where can I find the latest Rom?
Cheers
Anyone can point me out to the adequate ROM?
thanks
astpaul said:
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Click to expand...
Click to collapse

Categories

Resources