i tryed to search the forum but it seems no one had the same problem (or i was unable to search with the right term):
i try to make a backup of my MDAc, followed the described steps
(- MDAc in bootloader before tapping to install Windows
- connected the usb-cable
- launched romupdate
- selected \\.\WCEUSBSH001 as connection channel an
- gave OK), BUT
when the terminal window pops up i have no possibility to "insert d2s"
(and i saw some example screen how this window should look, but mine doesnt), because when the two devices try to communicate in the terminal window just appears "CLIENTCLIENTCLIENTCLIENT" then stops and stays in that way... no chance to insert anything...
some ideas?
thnx in advantage
Related
During replacement ROM v.3.29 on v3.32 WWE.Build 06 the message has appeared "checksum error!" then the device "has hung" and more to load it was not possible...
At attempt of restoring with usage of buttons "record" + "reset" and "camera" + "record" + "reset" in a top of the display part there is a text - " 2006/08/28 09:47:01 " in the bottom of an empty advance - bar and in one second the display is filled by a pseudo-graphics (triangles, point …)
Correctly it is possible enter only the mode - " Photo+Record+Joistick_Action - USB Console mode ", thus there is a text:
Galaxy FlashRom Update
2006/08/28 09:47:01
Cpu version: PXA27x
USB Cable is connected
And in the bottom of an empty advance - bar.
Win XP at connection informs that "the Device USB is not authenticated "...
Please prompt as to restore service capability P525 with usage of this mode?
The service centre Asus in my city is not present...
Download the official ROM v3.32 in the Download section in Asus Website.
Try Re-upgrade
As the operating system does not boot, I tried to load wearing v3.20.official. WWE (ROMGalaxy.nb0), but unfortunately anything new except for circumscribed in my first message has not seen... Where to find the information on that what driver it is possible to use for connection to P525 in the mode " USB console mode " to try to restore the device with the help of the program mtty or any another?
qwsr said:
As the operating system does not boot, I tried to load wearing v3.20.official. WWE (ROMGalaxy.nb0), but unfortunately anything new except for circumscribed in my first message has not seen... Where to find the information on that what driver it is possible to use for connection to P525 in the mode " USB console mode " to try to restore the device with the help of the program mtty or any another?
Click to expand...
Click to collapse
Try the Sorg's Asus Simple rom with 84.5MB of Storage Space with instruction about how to update.
Read the topic here
http://forum.xda-developers.com/showthread.php?t=281393&highlight=simple+rom
and you can download the Simple Rom from here:
http://rapidshare.com/files/1238374/ASUS_P525_v3.32.WWE.simple.build.01.BLU.zip.html
works fine with me... so far
Unfortunately, bootloader has some strange bug which prevents to update ROM through usual procedure if OS ROM image is less than 32MB.
so you have to update it through bootloader instead through autorun.exe.
1) unpack everything to root of MiniSD
2) insert MiniSD to P525. Connect USB cable.
3) press "Camera" button and while holding it press shortly and release "reset". device will boot into ROM update mode.
4) release "camera" button.
5) follow on-screen instructions
P.S: if updater tells "incompatible language" then restart device and execute ASUS.UnlockLangID.exe. After that repeat from step 3.
P.P.S: If bootloader doesn't start update and tells "galaxy .nb0" not found then your bootloader is too old and doesn't support this method of update. Download latest ROM from ASUS site and update it. After that repeat this instruction again from step 1.
Sorg
Be careful, read the instructions and of course whatever you do yo, you do it an your own risk.
Hey guys
I know there's a post nearly the same like this one allready, but i'd like to have a "how to reanimate" and not have the ppl to read 300 posts. The idiot i am i upgraded MDA with USB Hub and disconnected by accident while upgrading....
So here the steps to do
1. get out SD card and SIM
2.try to fix it with another flash, if doesn't work, step 3 (if computer reconizes your universal with active sync DON'T CONTINUE THIS TUTORIAL)
3.try mtty.exe (open active sync, uncheck usb conn, close active sync, terminate wcsmm.exe in task mngr)
4.now put universal in cradle, open mtty.exe
5.where Port1 is, change to usb, connect
6. (don't copy/paste) press "return", enter "set 14 0", press "return"
7.enter "task 28", press "return"
8.enter "task 28 55aa", press "return"
9.close program, disconnect from cradle
10.backlight+power+reset connect to the cradle
11. use ORIGINAL software to update RADIO only, it should work now, or try RUU_TMO_Radio_11200_GER_20060616.exe (http://rapidshare.com/files/97208659/RUU_TMO_Radio_11200_GER_20060616.exe.html)
http://festplatte.aon.at/a/filemanager.get/1710719/RUU_TMO_Radio_11200_GER_20060616.exe
12. upgrade With full version, radio, bootloader and winCE
13. hold both "-" "-"-keys and "reset"
14.WAIt, the screen looks black, maybe it takes 5 minutes, but it worked again =)))))
I did it, after 3 days of trying, thats why i'm so happy =)))
hope it will work same as it worked
~~~~~~~~~~~~~~~~~~~~
**** PROBLEM SOLVED ****
~~~~~~~~~~~~~~~~~~~~
Hi everybody,
I'm using german T-mobile MDApro with 64MB. I had one of your WM6 running. Good work btw! I only had some issues with WLAN an SDHC so I wanted to update.
And now I am in big trouble. I flashed one of your new WM6.1 as I usually did for the last 12 times when everything worked just fine. Bit this time I had error 113 during Extended ROM Udate. I tried and tried and always hat errors during the update process. And then I found out that I connected the device via USB-Hub!!! I know that it is not recommended. So I removed the hub connected the device to PC, but the error will remain the same for all updates and different ROMs.
There is no way to get the unit running again. Always the same: The fist part of update (CE) works fine, but the second part (extendes ROM) don't start. After a few seconds I get "error 113", sometimes I saw "error 114".
When I do a reset to factory defaults the screen remains completely blank (black)
After reset the device shows serial, connecting it to USB it shows USB. I have to do once or twice the [light + on/off + reset] to get it in this mode. Activesync 4.5 is running but doesn't connect or recognize the device.
Any suggestions?
Thank you so much!
some more details...
Bootloader v1.01 start after [power+light+reset]
- serial without USB cable
- usb when cabel is inserted (direct to PC)
MTTY starts and shows USB>
- anything I enter nothing happens on screen. I tried task 28 55aa, screen only shows "usb... v1.01"
Trying to flash original ROM:
- ROM Build starts from 0-100%
- when it tries to store Extended ROM nothing happens until Error 113
- the screen is blank this time (no "usb")
- when I unplug usb-cable screen returns to "serial"
- when I replug usb-cable screen shows "usb" again
BTW: the charge-LED is always off when connected to usb
maybe this helps some of you experts to have an idea?
Did I totally screw up my MDA??
Solution to the Problem
Hi everybody,
I found the solution here in the Forum. So please forgive my double posting
w3rti wrote in his post http://forum.xda-developers.com/showthread.php?t=374564:
So here the steps to do
1. get out SD card and SIM
2.try to fix it with another flash, if doesn't work, step 3 (if computer reconizes your universal with active sync DON'T CONTINUE THIS TUTORIAL)
3.try mtty.exe (open active sync, uncheck usb conn, close active sync, terminate wcsmm.exe in task mngr)
4.now put universal in cradle, open mtty.exe
5.where Port1 is, change to usb, connect
6. (don't copy/paste) press "return", enter "set 14 0", press "return"
7.enter "task 28", press "return"
8.enter "task 28 55aa", press "return"
9.close program, disconnect from cradle
10.backlight+power+reset connect to the cradle
11. use ORIGINAL software to update RADIO only, it should work now, or try RUU_TMO_Radio_11200_GER_20060616.exe (http://rapidshare.com/files/97208659...60616.exe.html)
http://festplatte.aon.at/a/filemanag...R_20060616.exe
12. upgrade With full version, radio, bootloader and winCE
13. hold both "-" "-"-keys and "reset"
14.WAIt, the screen looks black, maybe it takes 5 minutes, but it worked again =)))))
Click to expand...
Click to collapse
I tried the same strings with mtty, but the key was to type it and NOT to copy/paste it. And this time it worked!
And at the end of step 11 there is no feedback on the screen of the pda (blank screen, nothing). So I waited for 10 minutes and gave him a [power-light-reset]
After that my favorite ROM-version did flash all throw the whole process.
Thank you guys
Yehuuuuuuuuuu Oleyyyyyyyyy Jasjarım çalışıyor
I love you
i love you
i love you
i love you
thanks
thanks
thanks
thanks
thanks
thanks
thanks
thanks
thanks
thanks
thanks
thanks
thanks
................................................................................................................................................................................................................
Help, I did something wrong and I sort of cant use the phone anymore.
I installed a topbar. Unluckly I didn't read the info about it, and that it was made for Win 6.1.
I cannot access the menu, thus I cant uninstall the topbar or hard-reset my phone. There's a key combinatiou that's "Camera + Send + Power Button" that resets it. Problem resides there; My cellphone have a touch sensistive Send button, and this instruction is for a similar phone which possess a hard Send button. I can still, however, make calls and answer, send SMS's and read emails and activate bluetooth or wifi, but I can't start any app (I cant open the menu) or use the Mobile Device Center to do anything through USB (I've set it to connect directly as USB Mode and not to ask), I'll look for a Bluetooth dongle today to try to connect it through bluetooth.
I'm desperate. This phone is brand new but I already have made esthetical and hardware changes, so I've voided the warranty. Also that's a China phone, even though this particular model is able to update the ROM, I don't have the original ROM or knowledge to backup the actual one.
Any help is accepted. If there's any trick to go into "Add/Remove programs" without accessing the menus or to use some software hack to hard reset it thru Bluetooth or Wi-Fi, I'll be glad to know. If that's for any usage, I have Total Commander installed on this phone and I know how to edit the registry, but I can't start it.
Sorry for my bad english, I'm from Brazil
Thanks in advance and I'm really counting on you guys.
I'll be awaiting for an answer.
P.S.: I've been thinking - I don't know - about installing SPB Shell with some Auto Installer by the Mobile Device Center (over bluetooth) and let it start automatically, and by there, uninstall the culprit. Fiddling around, I've learnt how to trick the Mobile Device Center to make it install any CAB automatically, as if I've ran an auto-installer. My question is: would SPB Shell start automatically?
P.P.S.: Everything is working if I find another way to start it. Just the "start menu" died.
P.P.P.S.: No, I can't buy another phone. It's expensive here.
You can try MyMobiler, a PPC controller running on PC.
OR Try to remove it in Mobile Device Center if you can connect to it.
I don't have Mobile Device Center, using ActiveSync in win Xp but I believe you can remove on your Pc the partnership with your phone so next connection will start a new partnership where you can change the settings which prevent you from connecting Usb normally. Once you are connected, copy the file attached to your device, then take blackppc's advice, install MyMobiler http://forum.xda-developers.com/showthread.php?t=499344 and navigate to the file, execute and it will open settings where you'll find remove function.
I hope it helps
That's the problem, I can't connect it through USB to Mobile Device Center because I've set it to autostart as "pendrive" and not ask me about if I want it to start like this or in Mobile Device Center compatibility..
I'll buy a Bluetooth dongle in 5 minutes by now and I'll tell ya what happened
--
I.. er.. bought the dongle, but I cannot configure it. It cannot find any of my devices or enter the dongle's configuration area. It works well enough, though, on the store computer. I've tested thru 2 Windows 7 Computers and it gave me the same error.. gosh
As I said, I don't have Mobile Device Center but there must be a way to delete partnership with your device... Try this link http://technet.microsoft.com/en-us/library/cc722321(WS.10).aspx or google these keywords "delete partnership Mobile Device Center" and see how.
Alright, I've managed to get the bluetooth dongle working (a Bluetooth service was disabled). Now I need to connect the phone to the Mobile Device Center. Problem is that I had connected it to MDC, but I had hard-reseted then, and seems like MDC finds the phone as a "new device", thus cannot connect over bluetooth. Can I force it to connect or something? I'm thinking that may be my only shot.
P.S.: I can access a sort of device explorer (when I put the USB cable in and out, it pops up a message asking if I want to see the Memory Card images, and then it opens a image viewer. I can delete folders from there, if that's of any use)
tito12 said:
As I said, I don't have Mobile Device Center but there must be a way to delete partnership with your device... Try this link http://technet.microsoft.com/en-us/library/cc722321(WS.10).aspx
Click to expand...
Click to collapse
"On the mobile device:
If you have never attached your device to the computer using a USB cable, do so. After Windows Mobile Device Center starts, disconnect the device.
In ActiveSync, click or tap Menu, then click or tap Connect via Bluetooth."
I cant reach it
I've got an GREAT idea: I can, still, acess the image viewer. From there, I can copy and move folders around. So, all that I have to do is to create a folder in my memory card called "Start", with one shortcut inside, leading to the "Add/Remove programs" or "Hard Reset" program and copy it to the Windows folder. Then I restart the phone and it'll fire up the selected app. JOB DONE.
I only need to know the name of the app/parameters for Add/Remove programs or Hard Reset. Basing on what Windows is, it might be some "xxxx.cpl -command".
I leave this job for you guys, now I feel that I can still save my phone!!
I'll try link it to Total Commander first, before anything
P.S.: I've found the following string to invoke the "Add/Remove programs" for Windows Mobile 6.1
"#ctlpnl.exe cplmain.cpl,23?\Windows\shell.dll,13"
Would it work for windows 6.5?
P.P.S.: Meh, I cant create fake shortcuts that leads to nowhere on the local computer. How can I do it?
What a relief, God truly knows. My method worked. I can invoke anything from the phone using a shortcut. I've used the following line for the shortcut:
"33#ctlpnl.exe cplmain.cpl,10"
It invoked the "Add/Remove programs"
Thanks for the help, I really felt you guys tried to help me
I never seen a case like mine, but who knows.
Here's what I did:
- Connected the USB Cable into the phone, and it started as a pendrive
- Created a folder inside the phone called "Start"
- Created a folder called DCIM and added some images in there
- Created a .lnk file using XXMKLINK (which makes links from anything I type)
- Copied the .lnk file to the "Start" folder
- Unplugged the USB. At this moment, a popup appeared on the screen "Do you want to view the images?" Press yes.
*If the above method doesn't work, you can try going into a SMS message, then click for "Insert a Picture". The same browser will open
- Go to the root of the SD Card, or anywhere the "Start" folder you've created is
- Press and hold it, select Copy
- Click on the left side button and select "Device"
- Go to Windows folder. It takes a while to open
- Copy your "Start" folder inside. Press Yes on any prompt
- Restart the phone.
Voilá! The app will be run on the next startup
I really hope to help someone with this trick, who knows more than it helped me.
The topic can be closed at any time.
Great news
hi guys, here's a trick you can use if the "disconnect trick dont work"
1)connect your phone and let zune run, then go to phone>settings>update
2)check the timing, try it click any option after clicking update
3)mine takes 5 secs before zune shows "your phone is up to date"
4)once you get the timing right, deduct 1 sec (EX: 5secs-1sec = 4secs[this should be your trick time])
5)now, open command promt (search "cmd")
6)go to "my computer" then "C:" then "users" then "yourpcname folder"
7)open notepad, then type this exactly what you see here
ipconfig /release
ipconfig /renew
8)save the file as "newip.bat", save it in C:/Users/yourpcname folder
9)go to command promt, make sure you are on the right directory
it should show C:/>users/"yourpcname": *** your pc name is the name of the folder you open in C:/users/**
10) type newip.bat in command promt but dont hit enter yet
11) once you got the timing right, lets say about 5 secs zune will say your software is up to date, when you are in the 4secs trick time, hit enter after typing newip.bat in command promt.
12)if you did it right, it will show you "an update is available", there are might be 3 update, so you have to do this trick 3 times.
13) Enjoy you windows phone 7.8!!
by the way, it worked with lg optimus 7, nokia lumia 710, htc ttophy, samsung focus, htc hd7
Cheers!
Great !!! Doesnt Work
Its the same ideea as in the case when you switch off the wifi or lan. Here you just type a line in cmd instead of doing all this but anyway does not work on samsung i917.