Hello,
When starting my 9090 I get a message "Impossible to find SmartFilter.exe check the file or the access path..." and the Pocket remains stuck for a while.
I suppose the uninstall process of the trial version of this programm did'nt run complete, and left an entry somewhere.
Searching for 'smartfilter' doens'nt give any result.
Where to search for autorun/autoload folder or key in the registry ?
Thanks for any help.
Jean-Jacques
Go to \windows\startup\ and delete the shortcut for that program. I'm not sure that's your problem, but it sounds like it to me.
If not, then go to http://forum.xda-developers.com/viewtopic.php?t=7136&highlight=regedit
or search around. I know there are two versions floating on this board. I think the previous is the one I use/prefer. Also, I've been told that when connected via activesync, you can use windows regedit to access your device???? Not sure though.
Good luck, and if you muss up your device, it's NOT MY FAULT!!!!
No way :-/
Thanks, but it's a glue... :?
Neither Windows/startup nore deleting entries of NOVOSEC/Smartfilter helped.
I'm going to reinstall the trial version, and uninstall again :twisted:
JJ
Gone !
8)
go to a company called soti - they have a remote regsitry explorer that is very good..
www.soti.net
I found a glitch I've been trying to work around. I use an XDA IIs from O2 with the current Asian WWE O2 ROM in English ;-). Well if I connect to GPRS and use the internet for whatever amount of time I need it for, and disconnect, connect again, and disconnect, it will eventually freeze up the connection when I try to connect again. Either way after like 3 GPRS usages I must softreset in order to connect to GPRS, anyone have this same problem? I would like WM5 but I've upgrade and downgraded 4 times, its just not for my phone, its too slow even with overclocking.
i had the same problem~
and found this as the solution from somewhere in the search
PeterW said:
Here is a step by step instruction:
1. Download the older version of caller-id from:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
and transfer it over to your device. Any directory is OK. I used ActiveSync to put it into the My Documents folder.
2. Remove the file IA_CD-Startup.exe from \Windows\Startup on your device.
3. Rename iacontacts.dll to something else (e.g. old-iacontacts.dll). This file is in the \Windows directory of your device but is hidden. However you can rename it using your PC. Open Windows explorer, and navigate to Mobile Device>My PocketPC>Windows.
4. Rename displayCID.dll to something else (e.g. old-displayCID.dll). Access it via your PC the same as for the previous step.
5. Soft reset
6. Run the CAB file on the device - just tap on it.
7. Soft reset.
That should do it.
- Peter
Click to expand...
Click to collapse
Hi there,
I posted a problem today that doesn't sound quite like the one above.. but maybe it is... please read my post (don't want to make a mess by posting here too) and let me know if you think the caller id could the issue.
Thanks.
http://forum.xda-developers.com/viewtopic.php?p=181358
Hi there,
following my reply on the other thread, I found this one & followed the instructions. Since then I can always connect & disconnect GPRS and never need to use flight mode to re-activate GPRS
weasel said:
Hi there,
following my reply on the other thread, I found this one & followed the instructions. Since then I can always connect & disconnect GPRS and never need to use flight mode to re-activate GPRS
Click to expand...
Click to collapse
So far... soooo good. Strange that caller id would cause the issue. I also downloaded a "Keep your GPRS connection alive" app from another posting. That may be helping as well. Either way, no headaches thus far.
Thanks!
just as you get one thing working correctly...something else f***s up!!
just went to check some mails and now my GPRS settings don't work.
I've not changed anything, or messed with connections...it's just stopped working.
followed the instructions on the t-mobile website...but still no GPRS connection. Just nothing happens..doesn't even try to conect and tell that I have a username or password incorrect..just does nothing but tell me that the current connection cannot be used for your request.
wtf??
Can anyone let me know where I can find step by step instructions to get this set up?
many thanks
even worse...if I try to access anything while connected by wifi....the same message!!
the current connection cannot be used for your request!!...
URGENT HELP PLEASE
Just about had enough and thought about a hard rset....better back yo first though right?....and now active snyc wont recognise my device....could it get any worse???
Hmm is this a HTC Artemis or T-Mobile MDA Compact III? if its the later the hardware is not fitted for WiFi so that option won't work.
When my device is playing up in this way (which it does at least once a week) I simply soft reste the device by poking the stylus in the reset hole. Being a soft reset it doesn't wipe any data or settings - I wold start with a soft reset and see what happens next - Mike
You could try deleting your connections and the installing a tmob connection cab which shoudn't be too hard to find on this site.
This is one particular bug I,ve not yet had the pleasure of, but I can appreciate what a pain it is.
Do you have a backup that works?
well...I'm having a nightmare!!!!!!!
hard reset the phone (nothing seemed to be going my way)
someone on here told me that I could save a copy of pim.vol and then replace this back onto my machine and I would have all my contacts back....sadly not..if you try to copy this file back you just get a sharing violation!! I'll be making a comment about this in the post where it was suggested!!
so, might have to spnd the next few hours adding my contacts back in.
NEXT....to try to fix the sync problem I upgraded to 4.5 (as suggested by the MS website) ....that screwed my PC up well and proper!!...everytime I tried to connect my PC usage went to 100% and nothing worked!!
so had to search for my original CD and go back to 4.2 which seems to be ok now.
I do have a back up that I made a few days ago...just a little concerned that it will put back all the issues I had in the first place, as I'm not sure when I lost my connection stuff.
what a complete nightmare tody!!
try to restore, at least you will get you contacts back which I am sure though I can't point you at it, there are other ways of backing up.
Just finished restoring my backup from a few days ago.
Got my contacts back which was one of the main things.
then had to set up a new connection with active sync (now called PC2, how do I delete PC1???)
anyway..everything is back to normal..including my GPRS and wifi working...
happy man now...
Cool.
Just open AS on your PC, click file and you will see an option to delete a partnership.
I have hit the reboot on the back of my dell x50v and for the last couple times it says that "tbstart.exe failed to start, may need to reinstall".
I have no idea what this is and tried a search and found nothing on the internet.
Anyone have any idea what this is? I also posted another problem about my device now not recognizing my home network and says the ssid is hidden, are these two items related? I have wm5 ao2.
Any ideas?
I'd say that if everything is working the way it should on your phone, then go to the windows startup folder and remove the link to it. Don't delet it just yet, cut it and paste it somewhere that you'll remember where it is, like the My Documents folder, just in case you find out that you did need it for some program. More than likely, the reason it failed to start is because you removed the program and it forgot to delete the startup link. Don't worry that removing the link will cause your phone not to boot or something like that either because your phone is already rebooting without the program anyway.
Hello,
I am new to this forum, and I have read through a lot of the links and threads about this, but I have not found the answer to my question. Will these ROM Updates work on a HTC S621 that I have through Unicel? The phone is unlocked, but I dont know if that means that I still have to download the file that will unlock my phone? I am very interested and eager to upgrade my pnone to Windows Mobile 6.1, but I am honestly afraid that my inexperience with doing something of this nature will "brick" my phone and I will be without a phone. It irrates me to no end that neither HTC or Unicel are going to bother to come out with an official update for this phone, so if I want the lastest update to the phone, I have to go through unofficial channels. Could someone please tell me if this will even work for my phone before I try to do it? Thank you
Larry
Yes it will work sir, just follow the tutorial and upgrade... The tutorial is linked below in my signature... Also, as a beginner I would recommend using Ricky's rom version 24. ... if you need any help let me know okay... also, make sure you run connection setup after the upgrade...
Am I going to have a problem, or should I do something different since the instructions seem to be written for a phone on T-Mobile? I am really fretting about bricking my phone and I dont know if Unicel will do anything for me if I happen to brick the phone because I did something wrong. I would really like to try flashing the ROM on the phone to Windows Mobile 6.1, but I am just nervous, I guess. Thanks for the help and wish me luck
Larry
You should be fine if you read it over (print it out) and can follow directions. The main problems people run into are keyboard layouts and 270 errors.
No Guts No Glory
pfunkside said:
You should be fine if you read it over (print it out) and can follow directions. The main problems people run into are keyboard layouts and 270 errors.
No Guts No Glory
Click to expand...
Click to collapse
Yah exactly just read and follow instructions word for word...
nobody on this site can promise that nothing will go wrong, but it is usually determine that when something does go wrong, it is because the instructions were not being followed.
you sound a little too nervous to me to be trying this, you may want to either find someone else to do this for you, or take a deep breath, have a beer, and then dive in.
i've done this three times without an issues.
I did it to my unicel S621, and works wonderful! pm me if you need the internet settings after...
He will definitely need the internet settings... for sure...
yes, I need the internet settings please. also, how do I get rid of the "fav5" thing off the phone?
Thanks
Larry
larry.twichell said:
yes, I need the internet settings please. also, how do I get rid of the "fav5" thing off the phone?
Thanks
Larry
Click to expand...
Click to collapse
which version are you using? which rom version (i.e. are you using Rickys or Kavana's)
If you are using Ricky's go all the way down to the last thing on the homescreen which should be settings... and then scroll to the right to Chome settings and then in there you can unclick everything you do not like... everything that is bolded will show up on your homescreenv and everything not bolded will not show up..... then restart your phone and you should be on the go...
Hello,
Okay, I have successfully installed "Ricky's" ROM. I followed the steps to the letter in the newbie thread. I installed the keymapping .CAB file. My phone needs the Unicel Internet settings. I have once before reset my phone back to factory specs, which required that I have to go into the local Unicel store and get the internet settings and install them, the problem now is that I could use Wi-Fi to access the internet before with my phone, even though I couldnt through my data plan/cell service. Since I updated the ROM, I cannot even access the new through Wi-Fi. In the instructions, it states that you should run the connection wizard, but the problem is it only lists T-Mobile, AT&T, and Carolina in my phone, not Unicel. I know that the GSM partner of Unicel was bought by AT&T, but I dont want to set my phone to that because I dont know if it will screw everything up if I do.
So what advice can you offer me? Will getting the Internet Settings from Unicel or member Outragis solve all of my problems? Thank you for any suggestions! By the way, I Love the new Windows Mobile 6.1, now I just have to learn how to use it!
Thank You,
Larry
larry.twichell said:
Hello,
Okay, I have successfully installed "Ricky's" ROM. I followed the steps to the letter in the newbie thread. I installed the keymapping .CAB file. My phone needs the Unicel Internet settings. I have once before reset my phone back to factory specs, which required that I have to go into the local Unicel store and get the internet settings and install them, the problem now is that I could use Wi-Fi to access the internet before with my phone, even though I couldnt through my data plan/cell service. Since I updated the ROM, I cannot even access the new through Wi-Fi. In the instructions, it states that you should run the connection wizard, but the problem is it only lists T-Mobile, AT&T, and Carolina in my phone, not Unicel. I know that the GSM partner of Unicel was bought by AT&T, but I dont want to set my phone to that because I dont know if it will screw everything up if I do.
So what advice can you offer me? Will getting the Internet Settings from Unicel or member Outragis solve all of my problems? Thank you for any suggestions! By the way, I Love the new Windows Mobile 6.1, now I just have to learn how to use it!
Thank You,
Larry
Click to expand...
Click to collapse
Yes just private message that guy that said has the Unicell internet settings as you will need them in there and especially for receiving MMS (picture messages)... so just ask him to give them to you and I bet he will be more than happy to provide you with them.
I did PM him, I hope to hear back from him soon. I Imagine I would need to use Active Sync at home to download the updates to my phone.
Thanks for the help and advice, I am really liking the new interface!
Larry
I need Help!
Okay, so I am trying to find the files I need so that my HTC S621 that I have through Unicel to work and connect to the internet. I have contacted Unicel and they sent me a link to a file, and this is supposed to work, but it doesnt.
Here is the email:
Subject: Doing a Hard reset on the HTC621 will remove all Unicel settings
Issue/ Findings:
After doing a hard reset on the HTC S621 you will no longer have any Unicel settings and will need to reinstall them for WAP and MMS. To hard reset the HTC S621 (with the HTC S621 powered OFF) press and hold the 2 soft keys and than press the power button. Do not let go of the soft keys until you see the message to reset your HTC by pressing the send button.
Resolution:
The setting can be reinstalled into the HTC S621 by using a CAB file and a Micro SD card. The File has been posted on the internet and can be installed 2 ways.
Option 1: Active sync
From your PC go to http://www.unicel.com/devices/htsc621.html and download the zip file to your PC. Open the zip file and extract all the files within to your PC. Once this is done you should see the folder 2577 on your PC. Now connect your HTC S621 to your PC (you will need ActiveSync for this part and a memory card) and open Explore. Open “My windows mobile-based device”. Now drag or copy and paste folder 2577 from your PC to “Storage Card”. Once this is complete, unplug your device from your PC and power-cycle your device. After waiting a few seconds, you will get a prompt to do an auto-configure, press yes and your files will be installed. Once the auto-configure is complete, you will be asked to do a restart. Press yes to restart and all the settings the device had at the time of purchase should now be on the device.
After the device has power cycled, a change needs to be made to the GPRS Authentication to ensure connectivity. Please follow the steps below:
Start
Settings
Connections
GPRS
Unicel Info2Go
scroll to authentication type
CHAP
Done
End
Option 2: SD card reader
From your PC go to http://www.unicel.com/devices/htsc621.html and download the zip file to your PC. Open the zip file and extract all the files within to your PC. Once this is done you should now see the folder 2577on your PC. Now open your SD reader, with your memory card installed in the reader, drag the entire 2577 folder to the SD card. Once this action is complete, install the SD card into the S621 and turn on the device. After waiting a few seconds, you will get a prompt to do an auto-configure, press yes and your files will be installed. Once the auto-configure is complete, you will be asked to do a restart. Press yes to restart and all the settings the device had at the time of purchase should now be on the device.
After the device has power cycled, a change needs to be made to the GPRS Authentication to ensure connectivity. Please follow the steps below:
Start
Settings
Connections
GPRS
Unicel Info2Go
scroll to authentication type
CHAP
Done
End
Okay, so I downloaded the file and did what it said, but it is not auto running the file and doing anything. Is this because I upgraded the ROM and the file will not work with Windows Mobile 6.1? I am getting a little flustered and I love the new OS, but I would like to be able to use the internet on the phone. I cant even connect to the internet through Wi-Fi.
Does someone have the correct setting file for a Unicel HTC S621 that I could have to get my phone working right? I would appreciate it!
Thank You
Larry
Couldn't you just add them manually
Start - settings - then each add settings...
I'm surprised Unicel doesn't make them easier to access
This link might help but your easiest bet is getting the guy who commented to read you his.
http://www.howardforums.com/showthread.php?threadid=655672
Running out of memory?
I recently did the Kavana 6.1 upgrade on my Unicel/AT&T HTC S621. Everything is working fine except that the phone is constantly running out of memory (Which, actually, is not really fine...) Using the Free Memory app doesn't really work, as it will free only a KB or so, and it doesn't show the correct amount of RAM, in any case (usually around 5K instead of the 64K actually ob board). Any ideas?
Oh yes, and also, the phone now calls itself a C720W, which is a Dopod (Asian carrier) version of the S621... Anyone else?
Thanks,
John