Help, not used to WM flashing - MDA III, XDA III, PDA2k, 9090 General

Hey guys.
I'm not too fluent with the language of flashing the BA so I can't really do much.
I was using the i-mate 1.40 rom but decided I prefered the O2 rom as I use that network.
However, the battery life is appaling along with stability and BT useage.
Can someone give me a step by step guide (along with links) in simple terms because I honestly can't follow the guides on here . I would like the stability of the imate but with the o2 stuff.
Like I say, let me flash a Motorola anyday! So much easier!
Thanks in advance

http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
That should give all the info you need.
Iff not, sorry then i really can't help you

I spent 30 minutes writing a set of instructiopns for this today. I pressed 'post reply' and my wireless router had overheated and so I lost it all. Sorry. I will do it again later.

Well, I followed the guide on here as well as I could, and all I get is a Language ID error, or a ROM corrupt error.
Can some compile a zip of it for me? Just want a 1.40 rom with the O2 ext rom. Is that right?
My current device ID is: PH20B 0 B WWE E O2___001 1.31.00 0 0 1.31.139 1.06.00 06.00

Related

rom update

I'am new to all this and was wondering if its worth updating my XDA IIs these are the settings
Rom Version 1.31.00 WWE
Rom date 12/13/04
Radio Version 1.06.00
protocol version 1337.38
ExRpm Version 1.31.139 WWE
Could anyone let me know if there are any benefits, also how easy is it to update, ie can anyone explain in basic terms as I have never done this sort of thing before, also if it all went wrong what would be the worst case senario.
Is there a simple program that does all updates?
Thanks in advance
Hi Popupstands
I upgraded mine a few weeks ago from the O2 ROM like yours to the config detailed below. Have found that this ROM is a bit more stable and has better control over wi fi switching than my old one. still have the same old bluetooth connection problems. You will also have to modify the below EXTENDED ROM to replace the caller ID file with an older version to avoid GPRS disconnect problems...
before you do anything, you should read ALL the INFO at following wiki link
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
On a practical note, if you are reasonably happy with the stabilty of your device then the upgrade may not be worth it for you. I believe the official O2 rom update is imminent, so you may want to wait for that..
Hope that helps
Regards
Chris

1.40 iMate ROM and XDA2s

Hi all, my new BA arrived finally! I have decided to keep it afterall. I am a total n00b at this stuff, and really struggle to understand the Wiki site. However, I did manage to download XDA tools and backup my ROM.
I then downloaded the PDA2k_WWE_14000_176_11200 ROM from the FTP site. It said it was going to update my Radio and Ext. ROM too. Anyhow, it comes up with the country code error.
I added that line of script into the file but it still has the error. Any ideas? I thought the iMate 1.40 ROM was supposed to work on the XDA2s.
I really want a more stable device. Are there any other ways to do this? I tried using XDA Tools to upload the NK part of the iMate ROM separately, but it said it needed to be an exact size to work.
What is the best ROM? We couldn't even figure out how to cook and Ext. ROM so if anyone could give me a hand it would be much appreciated. The Wiki assumes you know what you're doing but I really have no idea.
Cheers guys - Mike x
You don't need to use XDA Tools it you're using a standard manufacturers ROM, just the No ID program for the device ID shortcut.
I had to add the country code ID in too, but after that it was golden. Not sure what's up with you...
Chris
If you are on O2 UK and want the imate ROM that also has O2 settings for GPRS, MMS etc, have a look here:
http://forum.xda-developers.com/viewtopic.php?t=24000&highlight=
It's a set of instructions that I made using the wiki, as well as info other members had given me, particularly mdaIIIuser to upgrade a UK O2 XDA IIs to the imate 1.40 without having to enter GPRS settings etc manually afterwards, and still keeping the country code to O2 (which means you can use an official O2 upgrade later , without any problems, if they ever get their arses in gear!)
If you need any more help, let me know and I'll do what I can. If you have an ftp site you want me to upload my upgrade files to, PM me with the details and I'll send it you. I'd put in on the ftp here, but i don't think it's worth taking up so much space with a customised ROM.
HTH,
Fin
OK guys, I managed to upgrade my device to the latest iMate ROM, and the 1.13 radio ROM
Problem now is cooking my Ext. ROM. I know I can't update the Ext. ROM that came with the iMate ROM. I want to put my 02 settings in, but I really don't know how. It won't let me put my old 02 image back on the phone, it says the USB is not connected properly
Does anyone have the .nb1 of the 02 Ext. ROM?
Sack that. I downloaded the newest 02 Rom I could find and extracted just the ext. Rom file from the .exe
I am learning
which o2 rom did you use? if it was the uk rom you will have problems as it is 1.31 and your rom is 1.40. you need to unlock the extended rom and copy the base rom 1.40*147 then add your o2 cabs and anything else
hth
fin
Hey thanks Findus, your guide was great.
Yea, I put the 02 1.3 extended ROM on. I didn't know what else to do.
Do you mean the base extended ROM of the iMate 1.40 ROM I put on? I tried that, and there is no Config.txt in the iMate extended ROM.
Sorry, I don't understand this too well
Hey thanks Findus, your guide was great.
Yea, I put the 02 1.3 extended ROM on. I didn't know what else to do.
Do you mean the base extended ROM of the iMate 1.40 ROM I put on? I tried that, and there is no Config.txt in the iMate extended ROM.
Sorry, I don't understand this too well
I did not do anything with upgradetools.rar but the device seems to be working fine. I haven't made a call yet as I'm cut off. Does this mean I don't have to do it?
Chers -Mike
Glad to have helped, although I can't take credit, I got all the info from thw wiki and other posts!
Have just been trying to upload my Extended ROM, it is a modified version of Cooked ERK 1.4x Base that can be found in the wiki under ERK 1.40 . This version of the EXT ROM does have a config.txt, you were probably looking at 1.40.176? All I did was add the 6/7 O2 CABS to the config.txt of the base rom, then changed the caller id cab to 1.20 from the link below:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
You will probably have some problems with the Ext ROM you have on at the moment, because you haven't got any of the patches for 1.40 which might mean GPRS etc might be unstable.
I will try and upload my Ext ROM again later if you want, all you will need to do is unlock your ext rom, delete the files, and copy over the new files. DO a hard reset and you're away!
Good luck!
Fin
OK, I don't understand.
I just delete all the files (aside from the 02 setup ones) of my current ROM and put these ones in? I don't need to upgrade the Ext. ROM bith the BAUpdate thing?
No, you won't use the BA Upgrade itility- that is for reflashing, which if you had a ms_.nbf file(extended ROM installation file) you would need. There is no tool to edit ms_.nbf files on Blue Angel, instead you have to unlock the Ext ROM manually, copy/delete files, update the config.txt then do a hard reset. Takes some getting used to- I was used to using er2003edit with my Himalaya to make a custom ms_.nbf file, but hey, this method works too!
Good luck,
Fin
Hey man, I already did it! Well good! It's based on the Qtek ROM you reccommended with the o2 stuff added in and the caller ID updated.
now running:
ROM version: iMate 1.40.00 WWE
ROM date: 03/10.05
Radio version: 1.13,00
Protocal version: 1337.42
ExtROM: 1.40.147 based on the Qtek cooked for use on 02 UK
My phone hasn't required a single hard reset all day and is still recieving calls (with sound) and messages
Thanks everyone!
-Mike
Hi
I am about to get an XDAIIs to replace my falling apart PDA2K.
I want to use it on Vodafone.
Is there a real 'idiots' guide to putting the latest and greatest ROM onto the XDAIIs.
(I really do mean idiots guide by the way).
Cheers.
Robin

o2 Exec ROM Update Required ? ? ?

I should have checked this before upgrading, but is there a XDA Exec ROM available anywhere?
Won't say any more but should have it this weekend :wink:
I presume from this, you're not keep on the imate ROM you've just flashed yours with??
If you're desperate to get back, try the cabs one by one from the O2 Extended ROM that is on the FTP
fingery said:
Won't say any more but should have it this weekend :wink:
I presume from this, you're not keep on the imate ROM you've just flashed yours with??
If you're desperate to get back, try the cabs one by one from the O2 Extended ROM that is on the FTP
Click to expand...
Click to collapse
GREAT NEWS !!!
Thanks for info. I hope that it will be online on the O2 site or someone will upload the upgrade. Please, just rate it from 1 to 10 8) .
My view regard the o2 & iMate roms...
The imate seems to be more stable, I've not had the system lock...yet
Performance seems slightly better, but nothing to write home about.
The Wifi issues seem to have disappeared, not sure why, and will be monitoring this.
The ui is better, all the o2 icons have gone, just a single battery icon at the bottom of the screen.
fingery, did you manage to get hold of the o2 ROM?
What's the current O2 rom anyway? I got my exec last week and it's:
R 1.04.02
G 42.37.P8
D 1.13.48 WWE
if that means anything. I was considering putting on the jasjar rom update that's on the ftp ("if it ain't broke, muck around with it until it is") since the D number is higher, but the other two are lower so I figured I'd play my cards right and wait...
M
P.S. if there's a way of extracting these, and anyone wants them, PM me with instructions/links and I'll do it.

Upgrade Advice Please

hey guys
this is my first post here so i just wanna say how much information i have learned from this site and the forums. and i haved used the search function but after hours came up with nothing.
I have a MDA PRO Running the latest T-Mobile Rom, but its causing me so many problems.
It Takes forever to answer a call(around 10 secconds after ive pressed answer) it takes ages to open any applications. its just slow.
i was running the Imate rom before and was really happy with it. but there are some features that have come in the new t-moibile rom that i would like to keep such as the green battery icon and the "Soft Key" Application.
So i was thinking of only upgrading the extrom and the radio.
My current config is:
ROM VER : 1.30.114 WWE
Rom Date: 04/13/06
Radio : 1.10.03
Protocol Ver: 42.44.p8
EXT ROM VER : 1.30.232 WWE
I was looking to upgrade to either the QTEK or the IMATE rom b ut i wanted to know if ill still have the green abttery indicator and "soft Key" application as im not sure if they come with the rom or the OS. if not can anyone tell me where i can get them from plz.
Also alot of ppl are saying that radio 1.09 is the most stable, can anyone confirm this please.
Cheers guys
You will not get those features with the currently available Qtek or i-mate WWE.
I do however, have a suspicion (my spidey sense is tingling) that there will be new ROMs from within the next month and a half.
In the meantime, feel free to cook up your own. :lol:
zonger said:
Also alot of ppl are saying that radio 1.09 is the most stable, can anyone confirm this please.
Click to expand...
Click to collapse
I've had no issues with 1.09 radio

Need Advice on Upgrading Plz help :)

Greetings! I am new here and I recently bought an xda exec here in china. Problem is, the exec was loaded with a chinese rom because it was intended for chinese users so i asked the seller to make it in english. It seemed they had a problem with changing the rom, Im not really sure coz i cant understand half of what theyre saying. After a long wait, I was given an exec with a dopod rom.
Now having a different rom from the supposed manufacturer's one, it seems my unit has a few errors, for example im frequently having a sddaemon (which i found out has something to do with the contacts list) and sddialer (which i think has something to do with voice dialing) errors. Another thing I have a problem with is, the boot screen, since it was loaded with a dopod rom, it says "dopod enjoy mobility" at the boot screen. I feel kinda uneasy with it, simply put, i dont like it.
Also, I think my problems would be solved by flashing a different rom, but im not sure what to use tho. Actually, I want to use a 'proper' o2 rom because i like to have the boot screen back to o2. Yet, it seems everyone is suggesting the JasJar rom, do you think i should use the JasJar rom? If so, How can i change the boot screen to the o2 one?
For anyone who can help, Advice on how to address my problems is very much appreciated. I tried searching the forums but i cant seem to get how the search function working. I humbly ask guidance and advice to my problems and a proper redirection is highly appreciated. thanks in advance!
also..
Also, I'm also considering upgrading to WM6. Is it advisable to upgrade to WM6?
WM6 has a better looking than WM5, and most of the software are newer.
If you want stable, you can use WM5, most of the new ROM are all for the WM6, I am also a user in China, I am now using WM6 with a chinese language supporting package.
How unstable is wm6? Does wm6 have features or anything to offset the instability?
@XingYun: are you using an english rom with chinese text support or is your rom purely chinese? Im thinking of copying your setup, would you advise it?
BTW, my Device information says the ff:
ROM version: 1.30.111 WWE
ROM date: 04/06/06
Radio Version: 1.04.02
Protocol Version: 42.37.P8
ExtROM version: 1.13.188 WWE
Any more help and advice is very welcome
Later builds of WM6 for Universal isn't really unstable. It's actually better. There's only one problem. NO VIDEO CALL.
You can get the latest WM5 ROM here:
http://forum.xda-developers.com/showthread.php?t=286036
You can get the latest WM6 Crossbow ROM here:
http://forum.xda-developers.com/showthread.php?t=303685
Use the Search facility... It really helps.
Ok, ive decided to upgrade to wm6. Since I want to have an o2 boot screen, should i use the o2 rom from the jwright link? Will it be compatible with my unit even tho I am running a dopod rom? All I need to do is follow the directions from the wiki :
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Am I correct? Sorry for sounding like a n00b, but I'm quite scared of making a mistake, so I want to be extra sure and extra careful. Advice and help is appreciated. thx.
I am using a English ROM with Chinese language support, and YouYuan text format, my machine infomation is like this:
ROM version: 2.05.00 WWE
ROM date: 04/09/07
Radio version:1.15.00
This is the ROM I am using:
http://forum.xda-developers.com/showthread.php?t=305512
Finally upgraded with Jwright wm6 rom, works fine now, thx everyone.
Hi, HProvider
Could you tell me where did you find the chinese language support package?
Mine does not work well with the Jwright ROM.
Thanks!

Categories

Resources