Hi,
Does anyone know a util or tool that can switch on my 9090 when i cradle it in my car? The carkit i have does have power, but internally the pin to also turn it on automatically is not connected. I don`t want to open up my carkit to connect it. Anyone know such a tool??
Thanx in advance
Related
I've got a problem with my car kit and the bluetooth of Qtek 9090:
When I shut down the PDA the bluetooth shut down too, so the car kit (a DriveBlue) disconnects from the PDA and you loose the Bluetooth connection (until you turn on the PDA again).
I¡hve got the 3500 bluetooth stack installed.
Does anybody know this problem?. And it's solution if possible.
Thanks a lot!
j.m.
I have a O2 XDAIIs been tring to find what exactly I need to do to ativate voice command with my bluetooth headset I have being looking
through the forums but am unable to find the sollution if there is one can someone point me in the right dirrection PLEASE GOING NUTS
I don't think it is possible. Problems with the integratino of Windows Mobile and the Bluetooth Static/Profiles.
So, is this a Blue Angel Issue, a Windows Moblie SE isuse, or both?
If just a Windows Moblie SE Issue does anyone know if WM2005 corrects this?
Thanks!
Its a windows issue rather than a BA issue I think, however there is a partial solution.
Press the connect button on your BT headset as if you were answering a call; then press the "contacts" button on your BA. You should then be able to speak into your BT headset. Once finished, disconnect the BT headset as normal
Not perfect, but a reasonable workaround. I have my BA in a cradle in my car & hardly need to glance at it in order to find the contacts button & get nearly-handsfree operation
Its a windows issue rather than a BA issue I think, however there is a partial solution.
Press the connect button on your BT headset as if you were answering a call; then press the "contacts" button on your BA. You should then be able to speak into your BT headset. Once finished, disconnect the BT headset as normal
Not perfect, but a reasonable workaround. I have my BA in a cradle in my car & hardly need to glance at it in order to find the contacts button & get nearly-handsfree operation
Dear weasel,
I have tried what you have advised to get BT head set to activate voice command. However, it don't work. Is there any thing else that I can do? I really hope I can dial a call via BT haed set.
Thank you.
WIth Motorola HS850, all I need to do to connect is to open it (given BT is on on MDA).
However, i-tech Clip is not noticed when I turn it on, and I need to go to BT Manager and manually connect it. What are the ways of solving it?
Please help me out I'm incredibly frustrated with this thing. I recently got the PDA2k and installed WM05 on it. It looks very nice and it runs speedy with no problems. My problem is the bluetooth which is huge thing to me. Either my headset (Tekkeon Eztalker Mini) is not compatible which I doubt or I'm making a stupid mistake.
This is what I did step by step: I click on the bluetooth icon and turn on the bluetooth, I then put my headset in pairing mode and the imate is able to recognize it and I enter the Pw and I put Set as handsfree. That's it, I would think I would be done at this point yet nothing happens, the headset doesn't do anything and I know its not Tekkeons fault because I was able to hook it up easily with my HP 6315.
So what's going what am I missing?
Also theres a tab at the bottom called "Com Ports" but I only see under this option "Incoming Port", and the description at the top says there should be another option called "New outgoing port". Does this have anything to do with it?
What Am i doing wrong? It's driving me crazy I can't really use the phone without the headset.
help me out pls
Bluetooth
I know the feeling, i have gone back to 2003 cause of that but now i am back on wm5. The bluetooth issue is not fixed yet, it is not stable, it keeps going off. There is a suspend cab file, but it does not work for me yet, also try pokect zen beta. You might get a longer period of bluetooth
thanks for responding, but the problem is not that it suspends or stops working. It doesn't start working at all even though the imate detects it. It's like it's not connected at all, not that it disconnects. I'm doing something wrong I just don't know what.
The bluetooth piece is not faulty and the unit is practically brand new. whats going on?
I used "Display Switch" binded button (From Wisbar Advance 2) or "Toggle Screen" (From SPB Pocket Plus) to turn off the backlight instead of using power button .
This work around will keep bt connection alive.
Note:
1. If you suspend your BA using psShutXP your bt connection .
2. You have to disable auto turn off device under Start -> Setting -> Power
Note:
1. If you suspend your BA using psShutXP your bt connection will be disconnected.
I'm sorry I'm not sure I'm explaining myself correctly. I understand that if the power goes off I will lose the BT connection but the problem is not KEEPING the connection alive, the problem is MAKING the connection. I follow all the steps , the imate recognized the headset but I'm not able to use it..also shouldn't a headset picture show up at the top of the screen when the bt headset is connected (cuz mine doesnt). what am i doing wrong?
thanks.
still need help please.. if someone can walk me through how to setup a bluetooth connection that would be great cuz I apparently haven't done it right.
The headset icon only shows in Phone app
The headset icon only shows up in the Phone application. It no longer is displayed in the notification area (top row).
If your device is paired up, when you make a call, you will see the headset icon in the top right corner.
You may also need to clear any old pairings that you headset has. I have a Jabra 250 and it happens all the time.
there we go you have solved my problem!. I didnt' have to open up the phone application on my hp 6315 to use the bt. So wait can I listen to music with windows media player through the bt headset or does it only work when making phone calls? I was able to listen to music on the HP 6315, is it different with the Imate or is it the NEW 05 os? Please enlighten me
thank you thank you
also one other thing does this mean that if i want to use the headset with the phone that I have to press the answer button on the imate rather than the headset..cuz that would suck big time.
what about when people call me can i answer with the answer button of the bt headset or no?
It works fine with the headset button for answering or hanging up.
Later.......... 8)
droy001 said:
what about when people call me can i answer with the answer button of the bt headset or no?
Click to expand...
Click to collapse
Does anyone know a way to tell the phone to connect to the car bluetooth for calls rather than the watch when I get in the car? Then also switch back to watch bluetooth calls when I leave the car?
thanks
Does the car connect to the phone at all when you get in, or does being connected to the watch block this?
I'm wondering if you place the call/answer the call with the car's menu system/steering wheel controls what happens, or if you are unable to even get this far.
Same problem
I'm having the exact same problem.
Carkit does connect (you can see in settings) but it says "(no phone calls)".
Watch is alsoo connected and says "(phone calls)
When i use voice control or the buttons on the dash to start a call it says no phone connected.
So my phone says that it is connected to carkit (no phone calls notification however), but if i look in settings from carkit it does'nt show phone connected...
The phone doesn't even connect to the car - I have to go into bluetooth settings on the phone and manually swap between the two when I get in and out of the car. I only connect to the cars on phone, not media audio.
I use the phone in 2 different cars, so ideally want to be able to automatically prioritise which bluetooth it connects to. I know there are apps like tasker which can do this but they are so complicated (or I'm too blonde!).
other thread
Found another thread already covering the subject...
Hope this helps...
http://forum.xda-developers.com/huawei-watch/help/android-wear-6-0-vehicle-bluetooth-t3327307