XDA2 (bl 1.06) Extended ROM 2 SDCard for other devices - Upgrading, Modifying and Unlocking

I have unlocked the Extended ROM on an XDA2 device (Himalaya for those with alternative distributers) with bootloader 1.06.
(This was done using the information at:
http://forum.xda-developers.com/viewtopic.php?t=8422 )
I am then able to change the ROM to suit my needs so that it loads various bits of software.
(Changing the cab files and config.txt file to my needs)
I can then copy this Extended ROM onto an SDCard.
(I followed the steps here:
http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=62&PN=1&TPN=2 )
Using this SDCard it is possible to Flash install the device I copied the ROM from, but not another device with the same bootloader. It comes up with the error:
"SD Download
==========
Sections=1
Not allow
update!"
Any ideas as to what I am missing to make this flash install onto other devices?
Many thanks,
GBird.

Just a quick nudge since there has been a lot of activity since I posted

Related

Unlocking SX56

Hello,
I need to unlock my Seimens Sx56 I downloaded version 1.2exe
but I get an error message "can not find ROM image to upgrade your Pocket PC"
Current
ROM A30.09
ROM 01/01/04
Radio Version A.33.02
Protocol version 1.3.3
Any suggestions, please help :
looking for the same.
it might require special editio rom.
What have you downloaded, and what is required by you? Maybe i can help....
Stefan
as per following thread link
http://forum.xda-developers.com/viewtopic.php?t=1611
http://forum.xda-developers.com/viewtopic.php?p=4203
I came to know from following
"Update: Do not download or install The Manipulator unless you have a serial cable already, and need to reset the call counters or change the IMEI on phones with Radio software prior to 4.20. To remove the SIMlock, simply install the XDA-developers Special Edition ROM, which, apart from unlocking the device, adds lots of other extras. Look at the forum for details on where to get it"
I think I must have "Special Edition ROM" which is not available right now. "I am downloading XDA-developers-SER-v12.exe" but Its for new xdaII I think, it might not work for xdaI.
some other I have downloaded are,
*Unlock XDA manipulator program.zip (contains XDAmSetup.exe)
*XDAunlock.exe (of 19k, which is not working I have tried it. )
*XDAunlock-src.zip (I have download this 2 months back but dont know what is it for).
my phone details
==================
make : ATT
ROM : A.30.09 eng
rom date : 01/01/04
radio ver: A.33.02
protocol v.: 1.3.3
MODEL : PW10B1
==================
Please tell me what should I do.
xdaI99 said:
I am downloading XDA-developers-SER-v12.exe" but Its for new xdaII I think, it might not work for xdaI.
Click to expand...
Click to collapse
That is the right file. It's designed for the xda I devices and is able to unlock your device.
There are several places to download it. You can get it via edonkey, should be announced somewhere here on this site, or you can get it from me.... http://lumpistefan.dyndns.org/tools/special_rom_1.2.exe.zip
xdaI99 said:
*Unlock XDA manipulator program.zip (contains XDAmSetup.exe)
Click to expand...
Click to collapse
This tool requires a serial cable and i think a Radio version before yours
xdaI99 said:
*XDAunlock.exe (of 19k, which is not working I have tried it. )
Click to expand...
Click to collapse
This tool requires the wmodem application installed in the ROM A.30.09 do not have this.
xdaI99 said:
*XDAunlock-src.zip (I have download this 2 months back but dont know what is it for).
Click to expand...
Click to collapse
Same as above, but this is the sourcecode, for modyfing, or self compiling....
HTH
Stefan
thanks for the gr8 help man.
what you suggest me to do for unlocking now.
can you tell me small stepwise procedure because I have many following files and dont know which one should I use first. I am very new and I dont want to take risk, I came to know that procedure can permanent damage my pdaphone, I dont have serial cable yet I am going to buy it rightnow.
Thanks
Just download the XDA-developers Special-Edition ROM 1.2 and install it on your device. (just run the exe)
This should install a new rom on your device (based on 3.17.03) and this ROM includes the xdaunlockk tool. This will automaticly started at the first boot, so that your device will be unlocked.
Test it if it's really unlocked, afterwards you can upgrade your ROM to any version you want. If you don't have an image of your rom you cann cook your own rom at http://lumpistefan.dyndns.org or you can save your old rom before flashing the xda-developers rom to an SD-Card and use that for flashing back....
Check also:
http://lumpistefan.dyndns.org/tools/manual_unlock.htm
http://lumpistefan.dyndns.org/tools/manual2_unlock.htm
HTH
Stefan
as per your instruction in given link.
http://lumpistefan.dyndns.org/tools/manual_unlock.htm
there is no need of manipulator I think because I can unlock by othere way as you given.
what I will do is.
1. will backup my original rom.
2. install new SE 1.2 rom which can be install without serial cable I think as per you.
3. this rom included unlock tool inbuilt and can unlock my phone.
is this work.
and please tell me what is "XDArit (XDA ROM Image Tool V1.2)"
is it available here http://lumpistefan.dyndns.org/tools/
:?
That's it. That should work.....
xdaI99 said:
and please tell me what is "XDArit (XDA ROM Image Tool V1.2)"
is it available here http://lumpistefan.dyndns.org/tools/
:?
Click to expand...
Click to collapse
XDArit shoud be old program to write ROMS on SD-Cards.
This tool is included in the XDATools. You can get it also from my site....
Stefan
ok I am going to install special editon rom 1.2 with usb today.
as per following tutorial step.
Backup the existing bootloader and operating system using card reader
---------------------------------------------------------------------
1) Insert a blank SD card into the XDA
2) Do a hard reset (hold on/off key then press the soft-reset button) click on Contacts button and choose 'CE+BOOT TO SD', and press the action button to backup the ROMs.
3) Once complete, remove the SD card from the PPC and insert it into the card reader.
---------------------------------------------------------------------
I have now back of rom in my 256 mb sd card.
after backup my sd card is not redable not in reader and in phone, so confused again and not sure that rom is there or not . please suggest if any other backup method.
ok, as per status if its in sd card then how can I restore is in to the phone again If somthing will happen wrong while installing se_rom_1.2.
You should be able to read the card via XDATools.
The format of the Card is in a special way, to get the bootloader of the xda to read the file and flash it back on your device.
You can test it by pressing power button and doing a soft reset. Then bootloader should come up and will tell you, that he found a ROM on your card and asks you if you want to install it.
Entering the bootloader deletes all data on your device....
But if you're going to flas a new ROM on your device it's not important...
Stefan
I stuck in "Create a V5.15..." pls help
To LumpiStefans and all guys,
Your instruction to unlock SX-56 is impressive. I did perform the "backup ROM" procedure successfully although it quite not the same as you directed, cuz I using ImageTool V1.0.5, but, I stuck in "Create a V5.15 Boot Loader ..." Below are my problems:
1/ I did find the "bootloader_v5_15.nb0 from the self-extracting zip downloadable here in the 'binaries' folder" as you quoted but when I attempt to write to my SD card by Image Tool V1.0.5, I got the message " Unsupported file format, don't know how to how to read the sourcefile..."
2/ Couldn't find XDA ROM Image Tool V1.02. Was it replaced by V1.0.1 or 1.05?
3/ There is no "radio button for 'before 5.17 (1K)'"
3/ therefore, I couldn't do the following steps:
-Select SD Card from the dropdown & Choose 'Write to SD card'
-Click on the radio button for 'before 5.17 (1K)'
-Click the 'Bootloader' checkbox
-Click the '...' button and browse to the 'bootloader_v5_15.nb0' file
-Click 'OK' to write the bootloader ROM to the SD card..
BTW, I did have my new ROM cook downloaded. Just waiting for your suggestion to solve the above problems. Your help is highly appreciated!!!
Big thanks! :wink:

Would like to upgrade ROM but . . .

Hi all,
let me start telling that reading through this frum gives me the feeling that this is a very nice place for information around htc-devices and I thank both creators and users of this site for such a good information-base.
Reading here convinces me that I am able to fulfill my wish to change the language of my VPA-IV (HTC Universal).
I am a Dutch person working in Russia. As I was living in Germany I optained the device there, hence the German language.
For me personally all computer stuff should be English, so I'd also like this device to be so. The fact that the keyboard is German does not disturb me too much.
As a Vodafone user, who has other provider cards as well, I immediately bought the unlock code, so the device is working with other GSM cards as well.
When I asked Vodafone (before I bought the device) if I could switch to English I was told that I should buy myself another Windows Software and they were not able to provide me with it. They were not able to provide any help, nor software for this purpose though.
When reading around the site here (as well as the ftp) I understood that Windows is not provided now. So my first question would be :
-Am I really set to go if I have downloaded the following files :
Jasjar_WWW_11353_137_10301.zip
MaUpgradeUt_noID.zip
Universal_Radinly_UPgrade_1.04.02.zip
Or do I need something more ?
Further I read about extracting the .exe file (f.e. Jasjar_WWW_11353_137_10301.exe) and put some files from there at certain places. I have WinRar but this program does not recognize the .exe file. Can I really extract files from this .exe ? How do I do this.
A lot of talking is here about a bootloader. If the device is in this stage, can I still access it ? (f.e. like seeing a harddrive in my PC's Windows Explorer or something the like)
As I will be stressed like hell (who does not, when he does this first time) when I see the bootloader screen, is there something I SHOULD or should NOT do to make sure all will be OK ?
Last but certainly not least I feel very eager to backup before I do this. Is there a posibility to backup my ROM in some way, save the files on some place for eventual return to the ROM and ExtRom I have now ?
I tried the Program TotalCommander. If I enter the Extended_Rom in the "directory" field of this program I see all files included in the Extended_Rom, same if I enter simply "Rom". Is a backup simply copying these files to my PC or is there more to be done ?
thanks for answering in advance,
Ruud
Hi,
I'm searching a german ROM...
if you have a little of your time to spend on it, i would be very thankful.
but first:
- about extracting the .exe files: Run WinRAR -> Menue: Open file... -> change 'All archives' to 'All files'
- about ROMs: Jasjar_WWW_11353_137_10301.zip is the only rom I would update, not the Radio.
- about bootloader: In this state you can't access your device (only updating the ROM)
- about backup: It is not easy. (How to d2s (dump) the ROM ) but I think Vodafone will shortly relase a update. So it will be possible to restor the device.
How to help me out:
- you will need a Storage Card.
- Download TestWM5.rar
1. Extract TestWM5.exe from TestWM5.rar and place it to you device.
2. At the device, use File Explorer to execute the TestWM5.exe
3. Click "button1" to start the dump process, the file will then be save to \Storage Card\Dump\
4. Copy the Dump folder out and then RAR or Zip it
This will include all files in your windows dictionary -> this is what i need
Where to place exactly ?
Hi bepe,
do not know if You are still available (or again). First your issue.
I logon to FTP from XDA-developers as to upload.
In the upload directory there is only a HTC-Wizard directory, not a wizard. Is this directory the one to place your file on ?
Is there a rule how to name the file ?
I will be dumping in a minute, can upload as soon as I have your answer.
Ruud
Hi bepe,
further to your issue.
1) I do understand that no private information is copied ? or should I do a hard reset before I dump for You ?
2) Whilst running your testwm5.exe from the root-directory of the storage-card I am being asked to agree your program access. This is normal, I allow. But why are there additional programs being opened I never heard about ? I denied them access and let the program run further !
After a lot of files running through the screen (very fast) it looks like the program stopped or finished. Now which file has been created for You ?
Explorer on the Universal does not show it, through my PC I looked as well, but do not see any big file, please explain.
Ruud
Hi Bepe,
one more reply to You :
Even if I allow the file mentioned to run (during the time your program is running), I am being asked again and again if I allow it again. The name is GAC_System.Data_v1_0_5000_0_cneutral_1.dll
Even if allow access all of the occasions I being asked, no file is being created on my storage-card, nothing to dump to You. Not even the dump directory is made.
What do I do wrong here ?
To my issue :
First I noticed that the radio update is available here only as 1.04.02
My system tells me I have 1.04.10 delivered from origin. If I do a ROM-upgrade, do I loose my "radio", or will it not be touched ?
Connected to this, can I dump my "radio"-files seperately ?
WinRAR. Issue solved !
Backup : I was at the buzzdev.net link before. But I actually do not even understand where I can get or see the task32 language he dumped on his screen. And I understand that I will not be able to restore it without help anyway. So this is not really the kind of backup I want.
The information about Vodafone, where does it come from ? when is something expected ?
Ruud
For security sake only.
I am getting nearer to make that final step ;-)
My Winrar was too old, I could unzip the .zip file to a .exex, but I could not unzip the .exe file further. Just downloaded the latest Winrar, now I can see all files included in the provided .exe file.
1) I understood that I should delete the original upgrade-file called ROMUpgradeUt.exe.
2) When I start the MaUpgradeUt_noID.exe in a seperate directory with the rest of the files from the .exe I get to see a different HTC device. When I continue, it will not recognize any of the versions from my Universal. I felt unconfortable to continue.
Can it be done without a problem ??
2a) I renamed the ms_.nbf AND radio_.nbf and restart the Utility, it still shows a photo of the wrong device, but it now does recognize the versions of Device CD image version : 1.13.56 Device Extended image version : 1.13.163 and Device Radio image version : 1.04.10
It confirms to change to CD image version 1.13.53 and leaves the extended image version : "empty" as well as the Radio image version : "empty"
Does this mean that by taking away the ms_.nbf and radio_.nbf files I can stop the device from upgrading the extended rom and the radio ?
Why I ask ? Because if I renamed ms_.nbf back and ONLY radio_.nbf is unavailable now, it shows to change the Extended Rom too, but the Radio image is still empty.
Finally if I rename ALL back, it shows to change all, but all version numbers are older once ;-(
Main question here is, can I leave radio_.nbf away, upgrade and hope for radio to be my version 1.04.10 ?
Ruud
Hi,
I'm back.
I'll PM you Upload information...
private information are not copied.
Only if you have saved private information in your /windows/ folder!
i have never being asked to agree for program access :?
...but I started it of the root-directory of my device.
what is the name of your 'Storage Card' folder?
I not realy have the info from Vodafone, but for all devices before there have been more than one update. But I can't tell when the first update is expected.
If you are trying to make a backup: you will need a terminal program
About dumping
So I have a complete "new" device now.
Did a hard-reset, after which I did not give any new information to the device.
I placed the .exe file You gave me in the \windows\startmenue before, after which it is asking tonloads of access requests.
Now I replaced it in the root-directorym Yes, no additional questions asked anymore, perfect, well NO. As there is no directory made on the storage card. I tried it once with the async active and once with the device seperate. No result.
Any ideas ?
what is the name of your 'Storage Card' folder in your root?
As the device is German, it is called "Speicherkarte"
and renaming is not possible (allowed)
OK this is the problem, I'm trying to get the Source code to change that.
found something: this tool will change the folder name from different languages to "Storage card" which is often needed for different tools
Understood.
About my question, as I am still nervously waiting (cannot start the upgrade before You got your data, can I ;-)
Did I understand correctly, that the file MaUpgradeUt_noID.exe is made for different devices from HTC and therefore I do not get a photo of the universal when I start the software ?
If I start the JASJAR_WWE_11353_137_10301.exe I DO get to see the Universal, but of course get the country error.
Did I also correctly understood I can take away the radio_.nbf from the directory and the update will handle both ROM and ExtROM but leave the Radio untouched ?
Will I be entering this "bootloader" status at all, as I do not need any further updates then ? Are there any resets after the upgrade which I SHOULD or SHOULD NOT make to get the device working again ?
Ruud
Hi bebe,
storage.cab works (be it only after a soft-reset)
The program testwm5.exe is much slower now, so the result is taking minutes now (if not tens of).
Looks like the perfect speed of the program while the storage card (at least for his eyes) was absent, was due to "saving into space"
Will upload asap.
Ruud
I'm loading JASJAR_WWE_11353_137_10301.exe its at 60%
MaUpgradeUt_noID.exe is a hacked version, of another device.
So the photo should not be important. (Please wait until i have downladed the file, I'm not realy sure jet...)
OK, I have to wait anyway, because TestWM5 is very slow now, I can see file after file and calmly read it. Before it was running before my eyes. I am afraid this is going to take ages.
We are on the same frequency that the dump I am making is from a device WITH Extended Rom installed. I was NOT soft-resetting during installation, so all Vodafone add-ons, are to be there now.
If You need the one without ExtRom as well, please tell me.
The upload works OK, I prepared a directory there, but uploading is to be done after longer waiting time.
Are You afraid the JASJAR file is not good ? I downloaded it because this one was proposed on this forum.
Ruud
Its not about the ROM its about the MaUpgradeUt_noID.exe I'm not sure if ths is the exe file to update a Universal.
I dont have a Universal only a Himalaya and my up UpgradeUt starts with HimUpgradeUt... .
Was this file mentioned in the readme of the JASJAR exe?
my download is very slow... 70%
I only downloaded MaUpgradeUt_noID.exe because it was proposed here (for the Universal).
I have no Readme.txt inside the exe
EnterBL.exe
GetDeviceData.exe
ms_.nbf
nk.nbf
radio_.nbf
RUU.conf
RUU.dll
UI.dll
Well and of course the original upgrade file ROMUpgadeUt.exe, but I was suppose to delete it.
Only file which I can read is RUU.conf :
[PLATFORM]=857873
[RADIO_TYPE]=2
[SECURITY_FLAG]=1
[DECODER_KEY]=1
[RADIO_FLAG]=2
[GETADDR_TYPE]=1
[JUMPCODE_TYPE]=1
[FORMAT_TYPE]=2
[SCREEN_TYPE]=2
OK, TestWM5 is finally ready, will do compressing and uploading soon.
Ruud

tool to access the samsung onedisk flash

i wrote a new tool that you can use to read the rom image, it can be found at:
http://nah6.com/~itsme/bkondisk.zip
Code:
usage:
first copy bkondisk.exe to \windows on your device, then:
prun bkondisk [targetdir]
will save all partitions on all volumes in files on [targetdir]
prun bkondisk -v0 -p1 [targetdir]
will save a specific partition on [targetdir]
prun bkondisk -v0 -b0 -n1 \firstblock.img
will save the specified blocks to \firstblock.img
prun bkondisk -i
will only list disk info in the logfile "\bkondisk.log"
-v0 or -v1 to specify the volume
-p0, -p1, etc to specify a partition
-b0 etc to specify a starting block ( ignoring partioning )
-n32 specifies to read 32 blocks starting at the above block.
note: you DON'T need to put quotes around directories with spaces in it.
when no path is specified, files will be created in the root.
Thanks! I've got a couple of questions... it extracted the following files:
bk_00_0000.img
bk_02_0005.img
bk_03_0025.img
bk_06_0001.img
bk_08_0175.img
What do these files refer to (which one is the ROM, etc). Also, is there a way to write these backups back to the phone? It would be a great way to try out test roms and get back to my original T-Mobile ROM if necessary.
bk_00_0000.img - IPL : ONBL1 + ONBL2
bk_02_0005.img - GSM + splash + gsmdata + simlock + serialnrs
bk_03_0025.img - OS
bk_06_0001.img - SPL
bk_08_0175.img - userfilesystem
Is there a way to write them back to the phone? or is that not possible...
is it possible to get a .nbh files out of these files?
My idea would be to "glue" the 4 files together (bk_00 to bk_06) in one file, rename the file to RUU_signed.nbh and exchange the RUU_signed.nbh created by the RUU.exe in \Profiles\[user]\Local Settings\Temp\pftxx.tmp with this one and then run on the RUU.exe with the modified .nbh
for example in DOS:
copy /b bk_00_0000.img+bk_02_0005.img+bk_03_0025.img+bk_06_0001.img RUU_signed.nbh
Is it that simple?
EDIT:
Ok this easy way doesn't work.
RUU says "Error 238 - File read"
Maybe some kind of checksum is missing....
Three questions for itsme
1. Could these files be used to create a nbf file to flash from the sd card as a backup?
2. Would it be possible to modify sim/cid lock?
3. Are these files in raw (dump) format that could be edited in hex editor?
P.S. Thanks to your other posts (works) that helped me figure out the whole sd card flashing thing for the Dash.
Maybe this helps a little bit to get ideas.
I have been searching here for nights - this is what I found so far:
1. I think it's similar to the Hermes - nobody found a way till now - the first step is to modify a signed .nbh, deleting works but not adding a file:
Hermes - how to dump ROM
Hermes - new custom ROMs
Hermes - ROM cooking and Bootloader MFG 1.01
aChef ROM Utils
2. This is the way Imei-Check is CID-unlocking - investigated by pof:
Reverse Engineering the Herems imei-check unlocker
Maybe there is another way like Zone-MR is doing it for the Star100/Qtek 8500
Star100 Unlock procedure but here you have still to decryt/encrypt the block in my understanding and therefore you have to find out the key
3. I didn't find anything about this so far, but I think the information is anywhere at XDA-Developers
EDIT: here (nl)itsme wrote:
.... but i am still busy, have not had the time to look at creating a tool to convert a memdump to a updater file.
Click to expand...
Click to collapse
so I hope he will find the time to create this tool
P.S: @itsme and @pof: I also want to thank you very much - you are heroes!!!
mar11974 said:
1. Could these files be used to create a nbf file to flash from the sd card as a backup?
2. Would it be possible to modify sim/cid lock?
3. Are these files in raw (dump) format that could be edited in hex editor?
P.S. Thanks to your other posts (works) that helped me figure out the whole sd card flashing thing for the Dash.
Click to expand...
Click to collapse
I got different files ...
After running the tool I got :
bk_0__0000.img (IPL? Is it same as bk_00_0000.img?)
bk_02_0005.img (GSM + splash + gsmdata + simlock + serialnrs)
bk_03_0025.img (OS)
bk_06_0001.img (SPL)
bk_08_0185.img (?????)
I did not get bk_08_0175.img, though.
Hints?
On the other hand, is it possible to extract files out of IMG files?
Thanks.

Error, Unknown rom version....(happens to every rom I create now)

I really don't understand what is wrong. All the roms that I create now cannot be created properly. The preconfig wont run, themes wont even apply, and when I try to reflash it with other roms, RUU says unknown version...I had to boot into bootloader to flash it. (without forcing sspl in ruu)
What the heck is happening? I'm cooking the same way i've been cooking (build OS + dutty's nbhtool) I'm getting very frustrated
Which kitchen or base ROM are you using? Need more info of exactly what you are doing!! Does this happen when you flash to official ROMs too?
I've used pandora, hypercore (they are both the same thing really). Both used to work fine, now they no longer work and both gave me the same errors "after" I flashed the rom I made. Here's the outline of the problem:
1) assuming current rom is schaps's 4.01
2) Runs RUU, auto detect fine
3) flash with the rom I made, flash completed, reboot
4) rom doesnt work properly, preconfig doesnt launch at all, tsk doesnt apply properly, and etc
5) run RUU, cant auto detect, "error, rom........."
6) boot to oli 2.10 BL, flash with "any" premade rom
7) repeats #1
The Roms I made were based on ATT's official rom, I've also used vp3g's coz most craps have already been removed.
1) run nbhextract to extract RUU
2) run nbsplit, imgfsfromnb, imgfstonb
3) toss os.nb into hypercore XIP extract, extract XIP
4) put everything into pandora's kitchen (root/ OEM folder, SYS folder, ROM [Os.nb, XIP folder]
5) remove/add stuff, rebuild .dsm if needed
6) run buildOS
7) run createbat
8) run NBtools (left "version as it is", chose hermes100, SuperCID, no ext rom/radio/spl)
9) rom created, then flashed.
I just made a basic rom with pandora. No editing done besides using the oem packages included to make it. Can someone try the rom out and tell me if you are facing the same problem? (Just a bare OS rom)
i.e. after flashing the rom, with active sync connected, RUU gives Error 244 and the only way to reflash it is get into bootloader mode. OR can RUU still work in windows after flashing it?
I need to know if there's something wrong with my bootloader (whether i need to reflash it) or somehow somewhere the kitchen tools that I've been using suddenly just screwed up any help is greatly appreciated
*I only have problems with the roms that I recently created, again, they used to work fine, I have no problems flashing other people's roms*
http://www.sendspace.com/file/3ycn37
I'd delete your HyperCore and Pandora folders and re-extract them from the original downloads to be honest. Whilst I can't think of what might cause the Error 244, I've found myself that after mixing this and that between HyperCore, Pandora and any of the zillions of 'working' folders I've got kicking about I do eventualy end up overwriting something somewhere that needs to be consistent between builds and knacker myself.
I have managed to solve the problem after redumping everything via the original tools. However, I'm still using hypercore kitchen to extract XIP. I no longer use dutty's NBHtool to create the image, I'm not sure if it contributes to the problem, but I'm having great results with nbhgen.
When I'm done cooking my rom, I'll document down everything I know and create my own kitchen.

Flashing from a MICROSD

I have an older version of NSF's rom, I want to upgrade to the last one he made in March.
Previously I have used my usb cable to do it. What would I name the ROM to make sure it flashes?
I already have the latest bell radio and phone is already unlocked.
Thanks in advance!
Am guessing you have a Touch/Vogue since you are in the Touch forums!
1) on root of SD card - copy the nbh file here and name it VOGUIMG.NBH
(It can be upper/lower case - don't matter)
2) power-camera-reset button til bootloader screen pops up
3) bootloader should see the VOGUIMG.NBH file and give instructions from there.
You just have to hit the d-pad key I believe, to start the process
Once the flash is complete - quick power-camera-reset again
After you are in the rom and all setup - delete the VOGUIMG.NBH file.

Categories

Resources