I have tried numerous ROMs and BT patches etc. - anyone found a combination that eliminates the crackle and noise? I've tried both a Sony Ericsson HB35 (I seem to recall that was the model) and also my current Logitech Freedom, and I get the same problem on both.
Cheers,
Q.
same here
here i got the same problem with me also
can any one say what to do
i have broadcom 3900
i have upgraded to it
Related
I have recently bought the Jabra BT320s Bluetooth headset for my Vario II. It all seems to be working well except that after about 10 seconds of music the sound will cut from the headphones back to the phone. This problem occurs everytime i try to use them. I'm currently using Schap's 4.01 lite. Has anyone experienced similar problem?
There seems to be some ongoing issues with BT that arise in various forms from time to time. If you have a look at this link or this one you may find some helpful discussion.
I have a continual battle with my Jabra BT8010. Tried to upgrade to its latest firmware, only to discover that I have to re-pair the devices every time I want to use them. Luckily, I still had my older firmware file, so I was able to go back to that one.
I suggest that if you search these forums enough, you should be able to find something that may give you a fix.
Hello,
I tried many kind of WM6 and 6.1 ROMs and faced the same problem with different frequency rate: my bluetooth headsets disconnect very often (also during phone calls) and actually I don't have any idea what should be the problem.
The HW I have is: H200 with Logitech BT mobile pro and Plantronics voyager 510 (of course not together the latters).
I tried different radio versions and different roms: the only variance is the "well-work" period. If it lose the connection I have to set off/on the BT in connection manager. Does anybody have this problem or know the root cause/soution to fix? I really appreciate any kind of help/suggessions.
Thanks
I have the same problem as you... I tried WM5 and WM6 (Official Spanish ROMs) and no solution found. My hardware is H200 and Parrot CK3000Evo. I think may be a hardware problem. Any help please???
vampirox said:
I have the same problem as you... I tried WM5 and WM6 (Official Spanish ROMs) and no solution found. My hardware is H200 and Parrot CK3000Evo. I think may be a hardware problem. Any help please???
Click to expand...
Click to collapse
Don't think there's any easy answer. Often seems to be a combination of headset firmware and BT settings in your WM device.
There are good discussions of some of the problems and issues in this thread and this thread.
Other than that, you could try different firmware versions for your headsets - that solved my problem with a Jabra 8010 (till it just crapped out completely).
Alternate solution is to cut the crappy earphones off your standard USB headphone and solder on a 3.5mm stereo plug. I haven't quite got to that stage yet, but have come perilously close many times.
e_gregious said:
Don't think there's any easy answer. Often seems to be a combination of headset firmware and BT settings in your WM device.
There are good discussions of some of the problems and issues in this thread and this thread.
Other than that, you could try different firmware versions for your headsets - that solved my problem with a Jabra 8010 (till it just crapped out completely).
Alternate solution is to cut the crappy earphones off your standard USB headphone and solder on a 3.5mm stereo plug. I haven't quite got to that stage yet, but have come perilously close many times.
Click to expand...
Click to collapse
Do you think it refer to the A2DP problem? I don't want to use my HS to listen to music; otherwise these aren't A2DP compliant neither. I just want to use for phonecalls as it designed for.
_sasa_ said:
Do you think it refer to the A2DP problem? I don't want to use my HS to listen to music; otherwise these aren't A2DP compliant neither. I just want to use for phonecalls as it designed for.
Click to expand...
Click to collapse
I want to use for phonecalls too. I'm sure there is a bluetooth problem, perhaps a hardware problem. I have same problems using BT GPS...
I have the same issue with my Cardo headset and my BTGPS unit.
On a call and the headset cuts out and call diverts to handset.
BTGPS working fine then suddenly no connection to BTGPS.
Are any of you using MS Voice Command with BT Fix? My problems seem to have started right around the time I began using it. Before that I don't recall having any headset drops. Can not say the same about GPS as I've only had it a short time and have not un installed VC to test.
BTW. I'm using the stock WM6 update and radio for AT&T 8525 H100 hardware.
Heykrop said:
Are any of you using MS Voice Command with BT Fix? My problems seem to have started right around the time I began using it. Before that I don't recall having any headset drops. Can not say the same about GPS as I've only had it a short time and have not un installed VC to test.
Click to expand...
Click to collapse
I'm not using voice command, and i probe it using clean official WM5 and WM6 ROM. Today I installed schaps WM6 ROM, but i have the same problem.
I have the same problem too. It will be ok for a few days, then wont be able to use BT (Plant 250). Then either I have reset the phone or turn off BT in phone and turn it back on, then it will work.
I believe it is a hardware issue, cuz I had a 8525 before, and never had this issue. But with the set I got now, its been a problem from day one.
I don't use voicecommand at all. The strange thing is that I use a Nokia BT GPS and it works fine always: no disconnection on long trips neither.
_sasa_ said:
no disconnection on long trips neither.
Click to expand...
Click to collapse
Do you use headset and BT GPS at same time? When headset disconnects BT GPS still working?
vampirox said:
Do you use headset and BT GPS at same time? When headset disconnects BT GPS still working?
Click to expand...
Click to collapse
Yes, the HS is dropping but the GPS still working forward. Strange, but because of that I think it's not HW problem.
_sasa_ said:
Do you think it refer to the A2DP problem? I don't want to use my HS to listen to music; otherwise these aren't A2DP compliant neither. I just want to use for phonecalls as it designed for.
Click to expand...
Click to collapse
Sorry if I mislead you with the A2DP stuff. Didn't realise you were having issues with just the basic audio.
As I mentioned in the other post, though, there seems to be compatibility issues between the MS BT stack and some headsets. Changing ROMs probably won't help, because they still all use the same BT stack. Better to try playing round with the headset - see if you can change firmware in that, if possible.
I know there are some people trying to port the Widcomm BT stack to WM6, but I haven't heard of any real success yet.
Hey there everybody!
After flashing away from STOCK i've come to notice problems with corded headsets (I'm using normal headphones right now).
For Example, any kind of sound is extremely low volume, that is until i press the button (that normally would trigger some kind of phone function, or the voice search - which it doesn't).
This only exists with corded headsets for me, not bluetooth ones.
Anyone else have this? Any ideas on this?
Shoot!
I had noticed when I flashed GBTweaked on my phone, I had plugged in an older headset and it stated that my device was not compatible with my phone; even though I had no issues with the stock.
I wasn't really concerned about it as I typically use my bluetooth headset anyway... In fact I can't even remember why I had pulled out that headset to begin with.
Is anyone else having problems with Bluetooth Audio on Kitkat. Mine glitches quite oftemn with my Sony MW600 headphones and also my Bose Soundlink 2 Speaker, I didn't notice it before KitKat? I have also tried the Headset-Bluetooth-Fix_CWM but no change really?
Any solutions out there? anyone else using similar Hardware to mine without problems?
wilx said:
Is anyone else having problems with Bluetooth Audio on Kitkat. Mine glitches quite oftemn with my Sony MW600 headphones and also my Bose Soundlink 2 Speaker, I didn't notice it before KitKat? I have also tried the Headset-Bluetooth-Fix_CWM but no change really?
Any solutions out there? anyone else using similar Hardware to mine without problems?
Click to expand...
Click to collapse
Hi,
I also have all sorts of problems with bluetooth, but I have not been able to find a good fix. To me it seems like issues with 4.4.2 and not specifically the Galaxy Note II. Looking at a LG forum, some guys adviced that switching off WIFI seemed to help. I have tried it out for one of my problems (microphone on BT headset stopping in the middle of a phone call), and it actually seemed to help. You could try it out.
Initially I thought it was issues with a Sony SBH-52 headset, but now that I also have issues (though different) with a Jabra Play, I have come to the conclusion that it must be the phone (software).
I am in contact with my local Samsung support team, and trying to see if they want to take the phone in for service.
Good luck!
spip72 said:
Hi,
I also have all sorts of problems with bluetooth, but I have not been able to find a good fix. To me it seems like issues with 4.4.2 and not specifically the Galaxy Note II. Looking at a LG forum, some guys adviced that switching off WIFI seemed to help. I have tried it out for one of my problems (microphone on BT headset stopping in the middle of a phone call), and it actually seemed to help. You could try it out.
Initially I thought it was issues with a Sony SBH-52 headset, but now that I also have issues (though different) with a Jabra Play, I have come to the conclusion that it must be the phone (software).
I am in contact with my local Samsung support team, and trying to see if they want to take the phone in for service.
Good luck!
Click to expand...
Click to collapse
Thanks, I may try the Wifi next time I use, let me know what Samsung say please
Hi all,
Hope you can help me..
I've been having issues with BT headset(s) since my Honor 7x was upgraded to Oreo BND-L21 8.0.0.330(C432).
The behavior is the following..
I pair the BT headset with 7X and everything goes smoothly. When i check info section on the paired device i see that both, phone and media audio are enabled. If i play the music - everything is OK.
The issue starts when I trigger a call via 3rd party app like Whatsapp, Viber, Hangouts etc..
What happens is that the other person can hear me but I can hear them. It seems like the communication is going only one way.
If in the middle of the call i switch to phone microphone (inside app) - everything goes back to normal.
I tried with two different BT headsets and behavior is the same (both headsets work properly on another phone).One other thing to mention is that all these apps also work properly with a wired headset.
So far i tried to disable Volte, disable Wifi and perform calls via mobile network, wipe cache partition, clear data/cache for BT app, enable/disable google assistant, change permission, unpaired all devices.. But so far nothing worked...
The only thing that is left is to perform a hard reset but I would really leave this as a last resort.
Has anyone had this issue ?
Thanks!!
Having the same issue with my anker soundbuds flow headset.
crash_o said:
Hi all,
The only thing that is left is to perform a hard reset but I would really leave this as a last resort.
Click to expand...
Click to collapse
Don´t bother with the hard reset, it won´t help.
In fact i´ve even replaced the phone, and on the new phone the story was the same: After the upgrade to 8.0, when a phonecall is made via App (Skype or Whatsapp) there is no sound in the BLuetooth headset, while microphone works perfectly. However is a normal phonecall is made, the headset works two ways.
The problem is reproducible on my several headsets (LG HBS-730 that uses BT 3.0 and Anker SoundBuds Life that use 4.1). The anker soundbuds flow, that were mentioned above, are also BT v4.1. Nevertheless, if i connect my Anker Soundcore 2 speaker (that uses BT v4.2) the two way communication works perfectly. Also it works on my EasyAcc speaker BT075 (BT v4.0) and Taotronics TT-BH12 headset (also BTv4.0).
So I´d assume that the update was tested only on 4.0 and 4.2 BT devices, but not on older or 4.1
So as for the solutions, i hope this problem will be addressed in the next update (hopefully soon) or consider trying the headset with BT 4.2 or later.
Update: It also does not work on speaker Aukey SK-M8 (which also reports to have BTv4.0) - strange. Maybe it is not really 4.0 or my theory with BT versions is wrong.
Thanks a lot for your feedback.
In the meantime i did some more testing with both bluetooth headsets and managed to get one working.
The headset i managed to "fix" is Plantronics voyager legend.
What i did was: downloaded "plantronics hub" app and in the settings I disabled "HD sound". By doing that everything started working correctly.
The only downside is the sound quality - it is so bad that I just decided to use a wired headset.
Hopefully this will be fixed in the next update :crying:
crash_o said:
Thanks a lot for your feedback.
In the meantime i did some more testing with both bluetooth headsets and managed to get one working.
The headset i managed to "fix" is Plantronics voyager legend.
What i did was: downloaded "plantronics hub" app and in the settings I disabled "HD sound". By doing that everything started working correctly.
The only downside is the sound quality - it is so bad that I just decided to use a wired headset.
Click to expand...
Click to collapse
Those are Bluetooth v3.0 headset. Obviously the problem is with the applied profiles.
I think it would be nice to report this problem to Huawei/Honor. I really don't know whether they check this forum, more reports they get - more chances of a fix.
edelgul said:
Those are Bluetooth v3.0 headset. Obviously the problem is with the applied profiles.
I think it would be nice to report this problem to Huawei/Honor. I really don't know whether they check this forum, more reports they get - more chances of a fix.
Click to expand...
Click to collapse
This morning I received an update to 331 - BND-L21 8.0.0.331 (C432).
I retested all of my BT headsets (including moving Plantronics back to "HD audio") and - everything works like a charm !!!
In the release doc it states that this update contains only a July 2018 google security patch but i guess they also fixed the BT issue.
Anyhow, I am happy again !
Cheers!