I just received my HTC Dash. It's been unlocked, and upgraded to HTC WM6. The In-Call volume is horribly low. The Joggr does affect it, but even at it's loudest it's hard to hear in a quiet room. I've searched the forums and made every registry change I could find, but none of which seem to affect the volume on a call. Any suggetions?
The most effective thing you can do is to make sure the Volume Strip is at its maximum level, and then disable it in Settings. If you touch it slightly when enabled during a call, you can turn it down. Best to disable it.
There are registry edits which I did, but once I realized my Volume Strip was disabled at a low volume setting, I put them back to their original values after turning up the Strip.
Once in a call, I jog it up and get the "Earpiece Volume" Screen. It's set to max (indicator bar on screen is full), and it's still entirely too low to hear. The speaker volume and everything seems fine. I just cant get the earpiece increased. Even will the volume you low, I can jog it down, and make it get even lower, it's like the top-end isnt high enough.
You might want to read this and try to edit your registry:
http://forum.dashsmartzone.com/index.php?showtopic=1809
runningerin said:
You might want to read this and try to edit your registry:
http://forum.dashsmartzone.com/index.php?showtopic=1809
Click to expand...
Click to collapse
I've went through all the settings and back, with no volume change.
Any other suggetions?
Did you restart the phone after making the changes?
I made the changes, adjusted my volume strip to max, and then it was painfully loud so I had to reduce the settings as follows:
CODEC 00
EAC 72
EARPHONE UPLINK 15
RECEIVE UPLINK 19
(I couldn't enter 0's anymore, for some reason!)
Anyway, it's perfect now for me. Don't know what else to tell ya!
Ive been searching everywhere for this but either nobody has thorght about it or its not possible.
with my Touch HD the volume is far to loud to listen to music as background music or through earphones and the HTC volume control step size for the volumes is too big. its either off, medium, loud or very loud!
the default WM6.1 control is even worse!
i know that you can use your finger to adjust the HTC volume control but this still isnt sensitive enough for me.
and i also know that it is possible to adjust the volume through tweak HD or advanced config. only problem with that is that I want to be able to chose to listen to very quite music or turn it up very loud without having to go through one of those settings.
so i was wondering if anybody could make a program that either has a large step size or a user defined step size for the volume and that is activated/volume through the volume buttons.
Thanks!
P.S sorry if this is in the wrong section or if there is a requests thread but i couldnt find it.
Ok i havnt found exactly what i wanted but i did find this:
http://handheld.softpedia.com/progDownload/Volume-Control-Download-35536.html
this is an aplication which lets you choose the volume with 100 steps. and it works from the system volume so using somthing like nitrogen or media player there is another 100 steps giving me 10000 steps haha
the bad points are that you must go into filemanager and manualy start it. and even then it does not work with the volume buttons.
(if anyone knows of a way to start this when powering on the device that could be useful!)
its good but not ideal.
if anyone else can come up with somthing better speak up!
create a shortcut to the exe and add it to /device/windows/startup ?
Yep, would be nice if the volume rocker can use this little tool.
Hello,
Any news on that topic ?
Thanks
I have the same problem, i think the stepsize can be changed in the registry but i dont know where i could find this.
Just to let you know the Volume rocker switch adjusts sound in 3 steps at a time. But during music play back you can use finger or stylus to adjust volume bargarph displayed on the htc HD screen in single step and thus volume is more finely controlled. There is no need to make registry changes.
The problem is, if youre using the E100 headset (or just want to press a button in your pocket to adjust volume) it would be nice if it'd adjust 1 step instead of 3 when pressing volup or voldown..
If youre moving and just want to adjust volume its really annoying to get your phone out of your jacket/pocket, pull out your stylus and lower your volume to 1..... might be just me that is a lazybones, but still!
With Good intra headset, even one bar is too much. Is it a WM limitation that the stepsize is that big ?
khanms said:
Just to let you know the Volume rocker switch adjusts sound in 3 steps at a time. But during music play back you can use finger or stylus to adjust volume bargarph displayed on the htc HD screen in single step and thus volume is more finely controlled. There is no need to make registry changes.
Click to expand...
Click to collapse
The actual problem is that 1 bar (out of the 15 available), ie the quietest setting the system is capable of, is TOO loud. I wouldn't dare use headsets at 10 bars (out of 15), the sound level would blow my eardrums out.
What we'd like to do is change the "range" of volume output - so that the output power is a LOT lower at low settings, while remaining loud enough for public broadcast (ie from the speaker on the back) at higher settings.
Anyone?
Same issue here. The minimum volume is still way too high. It's a waste of battery and could hurt your ear if you use in-ear earbuds.
Riceburner said:
The actual problem is that 1 bar (out of the 15 available), ie the quietest setting the system is capable of, is TOO loud. I wouldn't dare use headsets at 10 bars (out of 15), the sound level would blow my eardrums out.
What we'd like to do is change the "range" of volume output - so that the output power is a LOT lower at low settings, while remaining loud enough for public broadcast (ie from the speaker on the back) at higher settings.
Anyone?
Click to expand...
Click to collapse
As an addition.... I think this "too much volume" thing is something to do with the HTC TF3D music player itself.
On my (stock Rom) HD - I can listen to the FM radio at "normal" volume levels (ie about halfway up the range), but with the TF3D player - I have to turn it right down again.
Haven't tested it with other players (eg TCPMP).
Another request for a better solution to volume control.
bumpity
I have the same problem, ever since getting a set of in-ear MM50 (Sennheiser).
Too loud!
Any ideas?
gromitt said:
Another request for a better solution to volume control.
Click to expand...
Click to collapse
You may edit the registry file:
Local_machine\software\HTC\VolumeOverlay\SavedHand SetVolume
Change DWORD to 0
(soft-reset not needed)
plug in the headphone and adjust the system volume (press the volume button on side of the device and adjust the volume that is most soothing through the headset and it will memorize it! Once you pull out the headset the volume through the system speaker will be amplified as set by step 2 below. Plugin the headset again and the vol. will revert back to the headset volume level that you adjusted above).
You can always increase or decrease headset volume using the volume switch from this point and this new level you used is memorized during next headset insertion and automatically adjusted.
Step2,
This will tweak the volume that you want when headset is not plugged in.
But remember this will be the maximum volume through the speaker and you can only decrease it using the device volume button, not increase it.
You may have to experiment a few times until you get to a satisfactory volume level (don't forget to soft-reset after tweaking each time. I found 40 to be quite reasonable.
Local_machine\software\HTC\AudioManger_eng\Config\ music_player_volumn
Change the DWORD to 10 (you may have to adjust it to suit the volume you want when the headset is unplugged. In fact 10 is too low and I found 40 to be more reasonable) or lower(I think even 10 is too low!) and soft-reset the device.
the music will become lighter in the TouchFLO3D music player
I did both of the above steps and it solved the problem dramatically! It works even if you are using other software players(windows media player etc)
Edited by,
Fulham
Originally the solution came from maklik from another forum)
fulham said:
You may edit the registry file:
Local_machine\software\HTC\VolumeOverlay\SavedHand SetVolume
Change DWORD to 0
(soft-reset not needed)
plug in the headphone and adjust the system volume (press the volume button on side of the device and adjust the volume that is most soothing through the headset and it will memorize it! Once you pull out the headset the volume through the system speaker will be amplified as set by step 2 below. Plugin the headset again and the vol. will revert back to the headset volume level that you adjusted above).
You can always increase or decrease headset volume using the volume switch from this point and this new level you used is memorized during next headset insertion and automatically adjusted.
Step2,
This will tweak the volume that you want when headset is not plugged in.
But remember this will be the maximum volume through the speaker and you can only decrease it using the device volume button, not increase it.
You may have to experiment a few times until you get to a satisfactory volume level (don't forget to soft-reset after tweaking each time. I found 40 to be quite reasonable.
Local_machine\software\HTC\AudioManger_eng\Config\ music_player_volumn
Change the DWORD to 10 (you may have to adjust it to suit the volume you want when the headset is unplugged. In fact 10 is too low and I found 40 to be more reasonable) or lower(I think even 10 is too low!) and soft-reset the device.
the music will become lighter in the TouchFLO3D music player
I did both of the above steps and it solved the problem dramatically! It works even if you are using other software players(windows media player etc)
Edited by,
Fulham
Originally the solution came from maklik from another forum)
Click to expand...
Click to collapse
i just proud of my name is being posted by other
None of these thins work with noise isolating headphones where 1 bar is too loud. As soon as the phone starts to ring you are deafened as the volum is A LOT LOUDER than the music. I have the same problem with WMP as I can set a low volume in system, 3 bars, and 15-40% in WMP or an other program and the music is fine but as soon as the phone rings it absolutely kills!
man if someone solves this they'll make a few insta-friends !
We need a fix.
Many this app will help some, if not all of you !
It's a freeware developed by a member of this forum and it serves the simple purpose of allowing to set "volume steps" and replacing the default volume window. It's brilliant.
Work is still in progress, but it's already a must have at this point
http://forum.xda-developers.com/showthread.php?t=598997
Hello,
been searching/investigating this problem for a while and still can't find a solution.
basically, when using the stock wired headset, I find the volume during a phone call far too loud and not loud enough when listening to mp3s / radio.
when in a call, using the volume button does not seem to make any difference.
any suggestions?
thanks in advance
Go to your music tab in Manila/TouchFlo. From the menu you can choose Audio Booster. This could solve your problem with the not loud enough mp3.
For the phone "too loud" problem you can go to the settings tab -> Sound. There you have two volume controls; Ringtone and System. Lowering the system could solve your problem. But lowering using the touch volume button (as your stock headset doesn't has volume controls if i'm right), should lower the sound during a phone call.
You can push the volume buttons on the left side of the phone. Problem with this is it jumps in big increments.
But it'll also change the volume of your ringtones as well. So what you can do is:
Settings tab -> Sound -> Turn "Single Volume" off
Now when pressing the hardware key, you'll see it bring up System & Ring Tabs. So you can control your music volume without changing the ringtone volume
charlie_82 said:
You can push the volume buttons on the left side of the phone. Problem with this is it jumps in big increments.
But it'll also change the volume of your ringtones as well. So what you can do is:
Settings tab -> Sound -> Turn "Single Volume" off
Now when pressing the hardware key, you'll see it bring up System & Ring Tabs. So you can control your music volume without changing the ringtone volume
Click to expand...
Click to collapse
I forget to mention this, thanks charlie
I have the following issue myself:
Regardless how set up (single volume on/OFF, System volume set to 20% or 100%) my in-call volume of voice, once the call has started is extremely LOUD, regardless of who calls and how loud they speak.
This is even more so, if I'm using the wired headset.
Using the side volume buttons during a call do show the volume animation AND the volume bar goes down, but the actual in-call volume doesn't change a bit.
This is maddeningly loud.
Is this how it should be working?
I have stock 6.5 ROM (WWE), no hacks.
Same problem here...
... any solutions?
I have single volume turned off, and regardless if I try to turn down "ring" or "system" volume, the headset stays extremely (uncomfortably) loud...
Cheers,
Jan
Having the same problem. Is there a fix?
Not sure if Volumex fixes it on the TP2, but on my TP1 and HD2 no such problem.
i have the same problem. Volumex doens't fix it.
It's incredible that there is no solution for this stupid problem.
JanScheerer said:
... any solutions?
I have single volume turned off, and regardless if I try to turn down "ring" or "system" volume, the headset stays extremely (uncomfortably) loud...
Cheers,
Jan
Click to expand...
Click to collapse
My stock headset has a volume control, I gather yours doesn't have this feature?
no i haven't this features..
however i found the possible solution (it work for me), searching in other topic of this forum.
You mast edit the file audiopara3_TMO.csv (windows folder, it is hidden so you must use an explorer which allows to see the system hidden file like resco explorer).
basically you have in this file these lines:
F0,PHONE_HEADSET_VOL0,0,4000,4000,0,4000,C8,0,2000,0,780,FF9A,2580..
F1,PHONE_HEADSET_VOL1,1,4000,4000,0,4000,1F4,0,2000,0,780,FF9A...
F2,PHONE_HEADSET_VOL2,2,4000,4000,0,4000,5DC,0,2000,0,780,FF9A...
F3,PHONE_HEADSET_VOL3,3,4000,4000,0,4000,1388,FFFF,2000,0....
F4,PHONE_HEADSET_VOL4,4,4000,4000,0,4000,2EE0,FFFF,2000,...
F5,PHONE_HEADSET_VOL5,5,4000,4000,0,4000,61A8,FFFF,2000...
the most important value is the sixth (in hexadecimal) which is the volume value. if you use the volume level on the left side of the phone the volume of the the headset changes according the value reported in this file. I edit these values according to my "ears" ranging between c8(volume=200) and 61A8(volume=25000), and i clearly feel the change in the volume when i use the headset (you need an hex-decimal converter, there are several online)
actually (as suggested in other topic) you must point in the registry editor to this file, creating the value
HKLM\drivers\builtin\wavedev\AcousticFile and set this value to \windows\AudioPara3_TMO.csv (or rename the file as u want but with extention csv)
After editing soft reset.
In this file there are the other volume values for calls without headset, with the bt, and with the carkit. these values are in the lines
F6,PHONE_HANDSFREE_VOL0...
F12,PHONE_EARCUPLE_VOL0...
F18,PHONE_BTHEADSET...
F19,PHONE_CARKIT.
i suppose that to change the volume values on must changes the sixth parameter as in the previous case.
This works for me, and solve the problem.
I link the original discussion which helps me to find the solution:
forum.xda-developers.com/showthread.php?t=550784&highlight=audiopara
charvellano said:
no i haven't this features..
however i found the possible solution (it work for me), searching in other topic of this forum.
You mast edit the file audiopara3_TMO.csv (windows folder, it is hidden so you must use an explorer which allows to see the system hidden file like resco explorer).
basically you have in this file these lines:
F0,PHONE_HEADSET_VOL0,0,4000,4000,0,4000,C8,0,2000,0,780,FF9A,2580..
F1,PHONE_HEADSET_VOL1,1,4000,4000,0,4000,1F4,0,2000,0,780,FF9A...
F2,PHONE_HEADSET_VOL2,2,4000,4000,0,4000,5DC,0,2000,0,780,FF9A...
F3,PHONE_HEADSET_VOL3,3,4000,4000,0,4000,1388,FFFF,2000,0....
F4,PHONE_HEADSET_VOL4,4,4000,4000,0,4000,2EE0,FFFF,2000,...
F5,PHONE_HEADSET_VOL5,5,4000,4000,0,4000,61A8,FFFF,2000...
the most important value is the sixth (in hexadecimal) which is the volume value. if you use the volume level on the left side of the phone the volume of the the headset changes according the value reported in this file. I edit these values according to my "ears" ranging between c8(volume=200) and 61A8(volume=25000), and i clearly feel the change in the volume when i use the headset (you need an hex-decimal converter, there are several online)
actually (as suggested in other topic) you must point in the registry editor to this file, creating the value
HKLM\drivers\builtin\wavedev\AcousticFile and set this value to \windows\AudioPara3_TMO.csv (or rename the file as u want but with extention csv)
After editing soft reset.
In this file there are the other volume values for calls without headset, with the bt, and with the carkit. these values are in the lines
F6,PHONE_HANDSFREE_VOL0...
F12,PHONE_EARCUPLE_VOL0...
F18,PHONE_BTHEADSET...
F19,PHONE_CARKIT.
i suppose that to change the volume values on must changes the sixth parameter as in the previous case.
This works for me, and solve the problem.
I link the original discussion which helps me to find the solution:
forum.xda-developers.com/showthread.php?t=550784&highlight=audiopara
Click to expand...
Click to collapse
Thanks, this worked like a charm!
charlie_82 said:
You can push the volume buttons on the left side of the phone. Problem with this is it jumps in big increments.
Click to expand...
Click to collapse
I know this is probably stating the obvious, but if you press the volume button and you see the volume bar you can always adjust it to your liking by swiping your finger up and down on the volume bar. This way you can get the inbetween volumes between too loud and too low.