having problems connecting my bluetooth wireless headset to my xda11
[email protected] said:
having problems connecting my bluetooth wireless headset to my xda11
Click to expand...
Click to collapse
can u tell me specify bout ur headset?
basically, anyway, the bluetooth device has to be paired to become known each other.. have you ever do this?
while you configure your xda2, you also have to set your headset into a pairing mode<see ur headset documentation how to do this>
then you have to know the passcode of ur headset<also in your headset documentation> if done, you just make new bluetooth bound on your xda2.
if it doesn't work, anyway, try to download pocket bluetooth tools on:
http://www.bluetooth.jazztel.es/
this is such a good stuff u can try...
that's all, i hope it'll help
Hi, I've a problem with my qtek 8020 with 2.2.32.23 rom.
My smartphone doesn't recognize bluetooth car handsfree (metablue) automatically, after a pairing and a connection (that run perfectly) when I turn off the handsfree or the 8020, and put on, the connection doesn't start automatically, and I must cancel the connection and re-pairing again.
The handsfree runs perfectly with a symbian phone, therefore it's probably a bluetooth stack problem of my 8020.
Please, has anybody a solution?
Thanks all.
Hi,
After I install tomtom6 I'm not able to connect to my Bt headset?
Anyone had this same problem and solve it?
Regards
Kruz
i did the same - for me i had to select the bt headset via other bluetooth, where as before i had it set through other cable
hope that helps
shakirakbari said:
i did the same - for me i had to select the bt headset via other bluetooth, where as before i had it set through other cable
hope that helps
Click to expand...
Click to collapse
Don't you mean: Connect GPS via other cable in your TT6 config, instead of the BT Headset??
I have exactly the same problem here. (HTC Blue Angel with BlueTooth for Windows CE BT-PPC/PE Version 1.0.0 Build 3900)
When TT6 is installed, I can pair with my Jabra BT135 and create a shortcut, but I can't connect to it by using the shortcut.
After removing TT6 from the Blue Angel, I can connect to the Jabra using the same shortcut immediately.
So think with me here, why is this happening?
Could it be the case that the HTC Blue Angel is only capable of having 1 BlueTooth device/COM-port/connection/channel,
and that TT6 is somehow claiming a BlueTooth channel for a wireless GPS BT receiver that it could try to connect to and so the Jabra won't connect to it anymore?
Or is the HTC Blue Angel capable of connecting with more than one BT-device at a time, but are the headset and TT6 using the same COM-port for BT communications or something? In the second case, how can I change the port used by either the Jabra of TT6 ?!?
Does anybody have an answer to this?
have just resolved an issue others may have with TT6 installation affecting Bluetooth earpiece functionality.
Actually, I found the answer on the net after literally days of searching!.
If you have installed TT6, it will overwrite at least one bluetooth dll file. This can prevent other BT devices functioning after TT6 install. On my XDA 2s, I was able to pair my bluetrek G2 headset, but not connect. The answer is to re-name the "BtCoreIf.dll" file in the PDA wndows file to ""BtCoreIfold.dll".
Immediately, I had my BT earpiece functinality back, AND TTN 6 works too! Don't ask me how, it just worked for me
qtek9090
On my BlueAngel is the same with TT6 vs. Motorola Headset H300.
I've tried to rename BtCoreIf.dll but system don't let me to delete the original file I thing because it is in ROM.
I simple do a workaround: open bt service and connect the headset manually
argosafe said:
have just resolved an issue others may have with TT6 installation affecting Bluetooth earpiece functionality.
Actually, I found the answer on the net after literally days of searching!.
If you have installed TT6, it will overwrite at least one bluetooth dll file. This can prevent other BT devices functioning after TT6 install. On my XDA 2s, I was able to pair my bluetrek G2 headset, but not connect. The answer is to re-name the "BtCoreIf.dll" file in the PDA wndows file to ""BtCoreIfold.dll".
Immediately, I had my BT earpiece functinality back, AND TTN 6 works too! Don't ask me how, it just worked for me
Click to expand...
Click to collapse
I will try this out tomorrow on a HTC Blue Angel.
vdl said:
I simple do a workaround: open bt service and connect the headset manually
Click to expand...
Click to collapse
Then you don't have the problem as descibed in this topic at all. Because when TT6 is installed, it is impossible to connect to the BT headset (manually).
So I guess you are lucky.
Flow said:
Then you don't have the problem as descibed in this topic at all. Because when TT6 is installed, it is impossible to connect to the BT headset (manually).
So I guess you are lucky.
Click to expand...
Click to collapse
I think so: when headset is connected, TT6 do not connect automatically the Gps receiver, I must to doubleclick on Gps icon.
And vice versa.
Hi
i'm trying to pair my Sony ericsson HBH-GV435 BlueTooth headset with my alpine
i'm sure the headset is on paring mode
i added the bluetooth headset in my paired devices without any problems
but when i try to add it as a hands-free/headset setup it tries to connect to the headset and then it says "service discovery was unsuccessful"
i have Jabra BT620s and i'm using it as a hands-free headset and a stereo headset without any problems
but when it comes to the sony ericsson HBH-GV435 it doesn't work :S
please help me
thank you
UPDATE : in the connection wizard i choosed (Explore a bluetooth device to discover the services this headset offers , after choosing the headset it says (retrieving services ...) after that it says that this device does NOT offer any usable services.
keef on mind that i updated my bluetooth stack to make it A2DP enabled and gives also the ability to connect bluetooth keyboard.
i don't really know whats the problem between this headset and the Alpine Bluetooth Stack :S
I am having the same problems with the hbh-ds970.
please we neeed your help guys to solve our problem , i wish if i can use this bluetooth headset with my device
i'm still waiting for profissionals
I was wondering if there is a hack to be able to connect to the tilt 2 via bluetooth so use it as a bluetooth speaker for another device? Thank you in advance!
Don't Thinks So.
jutnac said:
I was wondering if there is a hack to be able to connect to the tilt 2 via bluetooth so use it as a bluetooth speaker for another device? Thank you in advance!
Click to expand...
Click to collapse
NO...There is no application available for the Tilt2 or any other WM based device that i am aware.
You can use your Tilt2 as the Sender and redirect all sounds from your phone over blue-tooth to a headset, Computer or and other blue-tooth reciver.
BT Audio avalible here works for me.
What a pity that this funcionality does not exist for WM !!
I would love to connect my old HX4700 to speakers and send music to it from any device... anyway you can buy hardware bluetooth receiver.