Passwords store for PocketPC and Desktop - Upgrading, Modifying and Unlocking

I have not long had a PPC - XDA IIs. I was wondering if anyone can recomend a decent sofware package to store passwords/bank account details etc... for the PPC and the Desktop PC....which provides synchronisation through Active sync. I have seen a few packages...."pocket safe" which is good but only stores passwords on the PPC. Others I have looked at include "Roboform" and "phatNotes". I'm looking at something either free or good value.
I guess this is the ideal forum to ask. I had a quick search on the forum but nothing specific came up.

Have a look at Code wallet from developer 0ne.
Im using it on my XDAII with just the pda version.
Ive found it very useful.
But you can get a desktop version as well.
http://www.developerone.com/

Take a look at keepass.sourceforge.net
There are two Versions. One for PC and one for PPC. As much as i know, you're able to synchronize the data on it...
Have taken a short look at it few weeks ago, but didn't have had the time to test it if it's good or not....
So if you try it, just give me a few comments....
Stefan

Password for PPC and Desktop
I use a thing called Ewallet from iliumsoft it is great syncs both ways as well so doesnt matter if you make changes on both ends
it is encrypted and password protected as well

LumpiStefan,
I have installed both the desktop and PPC version of KeePass Password safe and I can confirm that the they work well together. It offers the same or better functionality than others I have seen which cost!
Thanks for the tip!

SplashID
try SplashID
single package installer for PPC and desktop!
wonderful working!

I can't seem to get either the most recent, 0.3.0(1), or the previous 0.2.2 to work under WM5.
Any hints on how to get this to install?

Re: Password for PPC and Desktop
Iansjones said:
I use a thing called Ewallet from iliumsoft it is great syncs both ways as well so doesnt matter if you make changes on both ends
it is encrypted and password protected as well
Click to expand...
Click to collapse
I SECOND IT !! :wink:

Related

Finance sofware...

Hello guys,
I have been searching around for applications that can automatically retrieve bank account information online, but haven't found anything that might be compatible with the Dash.
I used to use SplashMoney with my previous PDA (Sony PEG-UX50) and I loved it. It did exactly what I wanted. I was hoping there would be a similar program for WM5.0 out there. It would be neat to have it display your account balance on the Home Screen also.
Thanks in advance...
You might want to take a look at Microsoft Money.
I thought that was for desktops? Is there a smartphone version? I don't see it.
Have you ever heard of Handango.com...? Much of what you post would be answered by stopping by there, or any of the other major online retailers.
.PoNeH said:
I thought that was for desktops? Is there a smartphone version? I don't see it.
Click to expand...
Click to collapse
I use FinPhone (http://subsembly.com/en/finphone.html) to retrieve account information and make payments via HBCI.
I haven't found anything yet that duplicates what Splash Money offers (no WinMo application available, but maybe in the next year based on an inquiry I placed into them). FinPhone looks interesting...is it available in English and does it work with US banks?
The best I found was SPB Finance, on my HTC Prophet. But I can't find anything close to that on the smartphone platform. I really need something to sync with Quicken.
I heard they were taking out a version of Pocket Quicken for Landscape smartphones. Maybe they will
FinPhone will work if and only if your bank supports the HBCI protocol (versions HBCI 2.0.1; HBCI 2.1; HBCI 2.2; FinTS 3.0). You need to check with your bank. At least in Germany, HBCI is quite widespread.
language: their site doesn't mention anything, so you might want to contact them directly.
As a side note, in my personal experience, if you are so inclined, using software in a foreign language is quite easy because all you need to look up are a few dozen menu entries, and that only once.
Anyone tried using StypeTap Platform on their Dash? It supposedly allows you to run Palm OS software on WM devices. Was wondering if we could get SplashMoney working on the Dash with this baby.
http://www.styletap.com/index.php
Try it out and let everyone know what you find.
.PoNeH said:
Anyone tried using StypeTap Platform on their Dash? It supposedly allows you to run Palm OS software on WM devices. Was wondering if we could get SplashMoney working on the Dash with this baby.
http://www.styletap.com/index.php
Click to expand...
Click to collapse

WM6 Email Client on WM5

Hi!
I have a Dell Axim x50v (VGA device) running WM5 AKU 2.3, and would really want to have HTML support for email, since WM5 email client doesn't support it. I don't want to download any extra third-party application like Flexmail, but rather would like to know if there is some kind of a plugin for this native email client that allows HTML support.... I heard of WM6 and it's richer email client. Is there any way you can install WM6 email client on a windows mobile 5 device like mine? If not, is there any WM6 ROM that will work on my PDA? (Other things like viewing Internet Explorer Mobile in high resolution mode, or the new "calendar ribbon" would also be a worthy upgrade.)
.... There is a very slight chance that Dell will release an official WM6 upgrade considering how old my model is.... (it came out in 2004, being replaced by x51 models in late 2005).
Any help will be greatly appreciated.
For what I have read, you are basically out of luck.
You can't rip the email client out of WM6 since it seems to be very much incorporated within the OS. If you want to enjoy the WM6 email client you have to upgrade.
As far as if there is a WM6 I am not sure and since you have reached a HTC forum, well, have you tried a Dell site?
agovinoveritas said:
You can't rip the email client out of WM6 since it seems to be very much incorporated within the OS. If you want to enjoy the WM6 email client you have to upgrade.
Click to expand...
Click to collapse
Quoted for the truth.
Outlook (PIM) depends on Shell, Shell depends on Coredll, Coredll depends on kernel. Bummer.
Like I said, there is no chance that Dell will be releasing WM6 upgrade for its handhelds, so visiting "aximsite" wasn't very usefull for me right now.
When you guys mentioned that the WM6 email client is very much incorporated with the OS, does the same apply with the Internet Explorer Mobile that now supports high resolution, or the Microsoft "MarketPlace"?
Is there at least a third-party HTML support plugin for the native email client, or is Flexmail the only solution for viewing HTML-formatted emails? (I would really prefer a "free" third-party application.)
Xdenwarrior said:
(I would really prefer a "free" third-party application.)
Click to expand...
Click to collapse
Try Qmail IMHO the best email program and what is more important free
http://q3.snak.org/download/ take most up to date compilation from Nightly build section and don't be afraid about japanese page Qmail is in english! At the bottom of download page you'll find openssl extension for secure connections.
I can't properly download this "Qmail" program. If I want to download and install it through activesync by first of all extracting the zip file from the nightly build and then running the exe file, it eventually says "not a valid Win32 application" or something like that. In fact, i can't stand that official japanese website, cause i get that same message for anything i try to download from there.
Actually, i got a chance to see how Qmail works (looks pretty nice - it supports HTML, right?), but not necessary to use it. Instead of running it on a PC, i copied right away that zip file to my device, and installed Total Commander on my PPC. However, I had to extract each component for Qmail separately using the Total Commander. Really a disasterous download, if not even. It ended up opening the program, but never really saving it anywhere on my device. After a quick soft reset, there is no more trace of it.
So, SERIOUSLY, does anyone have an alternate cab or exe file of the latest nightly build for Qmail v3 that actually works, not links to that japanese website?
I think you don't get the idea of inslalling it it's not self installing program! unpack it on your desktop than move whole folder with all files (all dlls and q3u.exe) to some folder on your ppc, probably the best is storage card. You can copy files that way by opening activesync and than klicking on explore button there will be your ppc just like any other folder in normal desktop pc. Copy whole qmail folder to it and thats it, you can start qmail using totalcommander on ppc or later create some shortcut to program on today or in programs.
here is packed folder "Qmail" with all needed files unpack it on your desktop and copy unpacked folder with files to your ppc using activesync explore button! Sorry but I can't write it more simply This one works on my ppc as all other versions did!
http://przemek.nekla.pl/Qmail.rar
and one more thing here you can read somthing more about qmail and the power of this program! also how to set it up
http://www.pocketpcthoughts.com/forums/viewtopic.php?t=46747
http://www.azol.ru/texts/QMail3_eng_FAQ.htm
Nice!!! I finally got Qmail installed on my device. Seems like it can do a lot more than just let you view HTML-formatted email. So, how well does it compete with the native WM6 email client?
Ohh, you guys never answered me about WM6 Internet Explorer. I find that IE that comes with WM5 takes very long time to open pages, or at least - fairly slow. (Doesn't work very well in the morning when you are in a rush, and don't want to wait for your PC to start up, and whenever it's ready to connect to the internet). Many WM6 reviews say that the WM6 IE is quite faster, supports AJAX, and especially more stable. (Don't know how to explain it to you, but when scrolling too fast the web pages, especially in landscape mode, at one point all the graphics and program icons become as if shattered with black, grey, green, red, ... lines -the images corrupted, that requires soft reset.) Not sure if this is an error, or if WM6 fixes it. That's why I was thinking of overwriting my current IEMobile with the Internet Explorer that comes with WM6. Or is it hard-coded, as well as WM6 email client, into the OS?
One last question. (sorry, if I'm bothering you guys too much.) Everyone knows that IEMobile of any kind does not allow multiple tabs. And i really would have preffered some kind of a plug-in, not a separate web browser, that allows it. I tried PIEPlus, but it also adds way too many features that I don't even need (i need a browser plugin that handles it as simple as possible) that only wastes more memory, and i think, slows down the IE even more. Any idea???
Ok, I know I was asking above lots of things. So, to make it easier:
1)Does anyone know how i can speed up my internet explorer mobile?,
2)And how i can fix that occasional screen error that occurs while browsing the internet that messes up my whole PDA?
So, um, can somebody help me?
Hello! Is anyone out there?

what are the best Apps and roms? and other questions

i just got my self an O2 XDA Orbit and i'm wondering what are the best apps and roms to have. i know it's a lil up to preference - i'm interested in the opinions out there. I already picked myself up copies of opera and cardexport 2 (i used the palm version and was very impressed). My main concerns is that i have previously been told that a firewall and a virus scanner were needed. Is this true?
Also i have read a lil bug the sd card issue. how do i know it has struck me? is the fix i have seen good?
i'd also love to be able to play fps games on the device when i am away. goes anyone know of any good review sites and/or shops? i also love playing GPL (general public license) games on my linux machine (no windows machines in this house. may have to, begrudingly, get a cheap laptop if i get problems with the device) so if there are any good free ones i will take a look.
I think that will cover it for now. if i get any more questions i will post and thanks for your thought guys and gals
if you feel progressive you'll start by joining the touchflo club using B&B4 rom (-->here<--). that might be a bit ...well, progressive.. if you just got the device, but hey, you got it for playing around like the rest of us, right?
before you flash a non-original rom to your device, make sure you read this thread. i recommend to ALWAYS use USPL before flashing something.
soardiac said:
if you feel progressive you'll start by joining the touchflo club using B&B4 rom (-->here<--). that might be a bit ...well, progressive.. if you just got the device, but hey, you got it for playing around like the rest of us, right?
before you flash a non-original rom to your device, make sure you read this thread. i recommend to ALWAYS use USPL before flashing something.
Click to expand...
Click to collapse
whats the difference between B&B4 and the official wm5 and wm6 roms? i do have the o2 wm6 update rom but i haven't installed it (coz i hadn't looked up how yet). so the phone is pretty much stock.
I bought the phone as a work tool but as i'm a techie and techie's get bored and wanna tweak stuff there is room for tweaking
The B&B4 ROM is WM6 but has extra features such as touchflo: like the HTC touch, certain finger movements make access to contacts, messages, music easier and finger scrolling like the iphone. It also has a much cooler look.
For WM6 and thus probably B&B4 there is a reg hack to reduce CPU usage: http://forum.xda-developers.com/showthread.php?t=308792
To put a new ROM on your device, It is recommended to flash with USPL unless it is from your manufacturer and for your country. USPL allows other ROMs to be downloaded without disabling your device. I could describe it as a sim-unlock for ROMs, if you use a sim from your carrier, all is good, if not, you cant use the phone. A little more serious than a simlock though, if you flash the wrong ROM without USPL, it could damage the phone/bootloader so as to make it a 'brick'.
To flash a ROM, make sure device has more than 50% battery. Soft-reset it and wait for it to load. Plug into usb port and wait for activesync to recognise. Run USPL and a command prompt will load, wait for it to finish (~5 mins). A new window will open with a picture of the device, tick boxes, click next then update... A progress bar will let you know how far the download has got to. Once complete, the device will reboot to wondows mobile. It is now temporarily CID unlocked with a SuperCID. Now run the exe for the ROM you wish to flash. The same kind of interface will appear as before, tick boxes, next, update... Watch progressbar eagerly (wipe drool off mouth) and let it complete. Your device will reset with new ROM.
If at any point a problem occurs, aslong as you see windows or a multicoloured screen (the bootloader) you can do this (whole) process again to complete installation.
Hope this rather messy post helps you out a bit. As to applications, somewhere on the FTP site I think is pocket doom. BEWARE: Some files on the FTP site are viruses, not detectable by antivirus software.
Pete
wicked and that leads me on to my Anti virus question. is that any anti virus tools for WM5/6? iirc i have seen some pc side ones that scan the phone if it's connected and the app is setup for it. also is a firewall advised? are there any?
There are a few antiviruses for PDAs, but TBH the only viruses I have heard of for them are proof-of-concept so I doubt anyone really bothers.
If you really want an antivirus, I've tried this before and it seems to be ok http://www.freewareppc.com/utilities/airscannermobileantivirus.shtml
When I mentioned viruses on the FTP site, I meant for your home PC!
oh right. i run linux so it's pretty much impossible to catch a virus infection. although i spose caution would be needed if i needed to install windows for something. i'm trying to install stuff straight to the device from the net atm using cabs and i have a tool that strips the cabs out of the exe files so all looks good there.
one question that has just crossed my mind (coz i just tried to do it and couldn't). Is there a way to install cabs once they have been save to the eeprom or memory card? i checked out "File explorer" for an option and didn't find one. "remove application's" seems to be remove only so, i'm a lil lost as to what to use. If i hit open in the d/l dialog in opera or PIE it installs them. Any tips?
You should be able to just tap them in flie explorer and they will run... You'll get a notification asking whether you want to run and then the usual installer screen will come up asking where etc...
i have to admit i didn't try that. i was thinking too far outside the box
thanks for all the help so far btw
No probs, I'm not an expert, computers and techy things just seem to come naturally to me!
same here but i'm known to have moments of thinking too abstractly and after using linux for so long i have kinda gotten used to having to think to get most of the things i do done.
i just saw some screen shots of B&B 4 and i do have to say "how good does that look?" i can't seem to find a feature list. i found it the other day. seems to have vanished in to the depths of the board tho. any clues?
Well I've got B&B4 and I must say It's probably the best ROM you can use on your Orbit... The black and blue go really well with the black and blue (duh) of the Orbit...
Heres the post for B&B4 with some screenies and the programs list: http://forum.xda-developers.com/showthread.php?t=321503
It's basically WM6 based, with TouchFlo making it a bit like an iphone where you can use your finger to scroll through stuff. Other finger friendly interfaces like the new today screen interface (with quick contacts access, programs, weather, time, phone profiles etc), htc audio manager, new skin for wmp, some very useful utilities, etc etc
Like WM6, and in the (edited) post I made earlier, you should carry out the reg hack to reduce cpu usage, other than that, and needing a separate cab for live messenger, it is _thebest_
If you decide to flash it, remember to use USPL...
i may do. i think i'm gonna check out my options first. i don;t wanna mess about with it too much because it is spose to be a tool for work. but seeingas realvnc works pretty well i think i'm pretty much covered for my objectives in the software department except for GPS software. money is no object there. i want the best. i heard tomtom was a bit unstable (from a treo 750w user) so if that's true i'm gonna stay away from it
Tomtom seems to work fine on mine so far ...
As a 'working' tool
I've tried all the flavours of roms out there - but didn't like the touchflo stuff on B&B4... I need my today screen to have my calendar and messages on it, so the big clock is no relevance, and the touch stuff is gimicky.
I'm running O2 WM6 on mine, with a few tweaks. It's definitely most stable, and quite fast, although I run batterymeter to overclock to 240-ish mhz for a bit more slickness.
I also use todayagenda to replace the calendar plugin as its far more useful.
I have a synchronisation with my corporate Exchange server for office mail, and route my personal mail throuh an excelllent free imap service at www.axigenmail.com - simple imap servers, no frills, works excellently.
TomTom 6.02 or 6.03 work absolutely fine, no issues whatsoever.
I've just started using SPB PhoneTools on my todayscreen to give me a decent quickdial in the car... I've just replaced my car stereo with a Sony MEX-BT2500 unit (£90 on ebay) that gives full bluetooth handsfree integrationand streaming with minimal fuss.

TP2 Logmein not working?

Anyone here use Logmein.com for remote desktop? I can't seem to get it to work.
if it's like on my hermes, logmein only works with PIE...Pocket Internet Explorer
No way to make it work with opera browser
The first time you log in with PIE it will suggest to install a .cab and next time you will log in you will be able to see your PC desktop...
hope this helps
Yeah, I installed the CAB but from PIE it refuses to launch the app when I log into the computer. Anyone else have this issue? I'm guessing it may require a patch or something.
whtrbt7 said:
Yeah, I installed the CAB but from PIE it refuses to launch the app when I log into the computer. Anyone else have this issue? I'm guessing it may require a patch or something.
Click to expand...
Click to collapse
did you perform a soft reset after cab install?
did you check your logmein psw?
sorry, no other ideas...
I'm also looking for a solution. I think something changed in Internet Explorer and doesn't load Logmein plugin.
try another free vnp solution...like net.viewer or REALVNC FREE
I have also problems with LMI
I am a long term LogMeIn user and I have also problems with my TP2. I can get to the point where I can choose Remote Control from the list but after that nothing happens. I have tried everything with cab installation - for nohing.
I had HTC Touch Pro earlier and it had some issues, too. I could establish a connection to remote desktop but I could not authenticate.
Before TP I had TyTN II and it worked fine. I have also have Qtek 2020, Qtek 9090, Qtek 9000 and HTC Advantage x7500 and they have also worked OK.
If someone can help us with this, it would be the greatest!!!
I'm bumping this up again to see if anyone has issues with Logmein.com . So far there is no fix. I think PIE isn't referencing the remote app so you can't even authenticate. Anyone have any ideas?
I had the same issue - and I was assuming it was because of the new IE - Logmein needs to fix its viewer to work with new IE
CHfish
OK, I found a fix. We need to download IE Toggle 1.1 and then set up IE to run as PIE. This will downgrade the browser and it will allow Logmein to work. Unfortunately I lost the link to the file so please google it.
OK, here's the fix link. Apparently people that had IE issues had the same problem.
http://discussion.treocentral.com/treo-pro/177752-toggle-between-pie-ie6-free-app-cab-file.html
whtrbt7 said:
OK, here's the fix link. Apparently people that had IE issues had the same problem.
http://discussion.treocentral.com/treo-pro/177752-toggle-between-pie-ie6-free-app-cab-file.html
Click to expand...
Click to collapse
Can you upload elsewhere please mate, would save everyone having to register with treocentral.
thanks,
Beasty
NP,
Here's the file everyone ^_^
http://www.megaupload.com/?d=W8D60G9N
Thanks, downloaded and uploaded to the tweaks thread.
Cheers,
Beasty
Have you got LMI working now on the TP2? I am particularly interested in remote desktopping for support reasons.
If so... How effective is it?
I also have an enquiry open with LMI.
Thanks,
Sam
SamJolly said:
Have you got LMI working now on the TP2? I am particularly interested in remote desktopping for support reasons.
If so... How effective is it?
I also have an enquiry open with LMI.
Thanks,
Sam
Click to expand...
Click to collapse
Urm, yeah - as above, credit to whtrbt7for providing solution. LMI on WM is free, so try it for yourself!
Credit should go to Codyppc on treocentral forums since he developed the IE Toggle app. It fully works after you've followed my directions.
I have a wierd problem with logme in. I installed IE Toggle and was running IE under PIE mode. Log Me in loaded fine and it even came with username/password screen on Win Server 2003 R2. When I try to enter my password through the QWERTY keyboard, nothing types in the password screen. Backspace works but it will not let me type anything in the password screen.
You seem to be having the keyboard issue that some users have. Here's the fix:
use this app called kfortouchpro:
http://www.megaupload.com/?d=IUL92CPS
or if you want to just use the hardware keyboard for everything:
Registry edit:
[HKLM\System\CurrentControlSet\Control\Layouts\e001 0409]
(MS IME mode)
Ime File = \windows\compime.dll
Layout Text = COMP IME
-or-
(HTC T9 mode)
Ime File = \windows\eT9ime.dll
Layout Text = eT9 IME
hello
I also have problems with my pro2 and logmein....
the ie toggle 1.1 does not work, i can install the app but i can´t find it to start??! program folder?
Logmein runs with ie6 and pro2, but it´s not so comfortable as using with pie.
(logmein with ie6: goto settings in ie6 and set the view to desktop, goto settings in logmein and change activex into java).
My old XDA using pie and logmein was perfect to control.(logmein for pda and using activex).

[Q] Spb Finance / Entry getting Can not initialize main dialog! error - any fix?

Hey there
I just installed Spb Finance on my blackstone with duttys R14 and when I open the spb finance entry app (already modified for my resolution with the dskin file) it shows error: Can not initialize main dialog!
Does anyone else encounter this?
Is there a way to fix that?
Thanks
same problem here.. any solutions?
I also have the problem...
... my machine is a HTC Diamond 2 with a newly loaded Win 6.5 ROM. Before SPB Finance was running without problems. Has somebody any idea? Thanks!
So it seems to be a problem with all WM6.5
Known problem in WVGA devices, not just 6.5! You need to search the SPB main site and download a new skin for this finance entry sub-program. This may be in the "Sticky" section of the Pocket Finance forum. Hope this helps.
Alan
Folks, I have been using SPB Finance v2.8.0 fine up to Dutty's Leo R4, which runs on wm6.5. It also ran fine with 6.1 stock and various cooked roms. Never had the problem you've mentioned.
Found this
Alan
I've already tried everything, but without any success - same error msg. I use XTROM GridLeo 1.8.1. Before that, I've had the original WM6.1 rom and after fixing d_skin file it did work. But now, it doesn't.
thanks Alanjp3. it is vga skin, but works.
While the skin worked with my Sprint HTC Touch Pro2 on the WM6.1 Rom, it does NOT work on the WM6.5 ROM.
SPB does not support this product any more.
Has anyone here got a solution on how to run this on a 6.5 ROM?
Thanks folks!!
try winmoFinance....very simple app, gives you what you need...
I changed to that and am OK for the basic money in my pocket tracking
same problem for me too so i changed for Inesoft Cash Organizer.
chiekh said:
same problem for me too so i changed for Inesoft Cash Organizer.
Click to expand...
Click to collapse
Yes, that's what I'm using now as well. Works great, though I have one little gripe: In order to see my balances through the today plugin: does anyone know what the shortcut / command parameter to that is? It's so much faster than to have to open the whole program to see the balance.
Another thing: With Cash Organizer I seem to have to buy the program each time I change devices. Is that normal, or am I doing something wrong?
Tried other options too, like WinMoFinance - but it doesn't do what I need it to do. I need to sync 2 PPCs with MSMoney, and the Quick Entry screen is a must by now.
Thanks to all who keep looking!
spbFinance seems to work, sort of
Facing similar problems in upgrading to HD2, I enquired of spb and got this helpful answer that might be of use to others:
"Unfortunately SPB Finance has not been updated for several years, and currently I am not able to promise that it will be updated soon.
SPB Finance does not fully support recent Windows Phones, like HTC HD2. The main application will basically work, but the additional one SPB Finance Entry will not."
I haven't ever used the SPB Finance Entry route, so I stand a chance of getting the main program to work, especially if using a DAgi stylus.
The Cash Organiser program generates a Product ID number that is keyed to the PDA, probably not the Owner Name as lot of product ids do (in which case it would be portable if you use the same owner name) ore likely the PDA UUID in which case it is a new Reg Key for each PDA. That makes it pretty difficult when it comes to upgrading machines so I give software with that kind of protection a miss.
Yup, Inesoft's Cash Organizer is out for us too.
- I change devices often (also have my weekend diamond), and I would have to write in and have them send me a new key each time I change my device. A no go for me.
-the program has at times trouble syncing and when it sees conflicts, just creates a fictitious account on the pda. And even when I erase the account, is keeps it in it's guts and recreates it each time I try to sync again.
Thank you much for posting your correspondence with spb.

Categories

Resources