Errmsg : "Cannot execute \windows\IIWPO_main.exe" - Upgrading, Modifying and Unlocking

I have the same problem as girtsn :
http://forum.xda-developers.com/viewtopic.php?t=23601
after uninstalling IIWPO i get this msg every time I turn my xdaII on.
I can't find anything in the registry or windows/startup. Or anywhere ellse for that matter.
please help

Related

ERROR 120, country id error. With USB v1.00 on my screen

Hi,
I tried to upgrade my MDAc with the rom from TMobile.
During the upgrade my computer asked for this file "wceusbsh.sys".
At that point the upgrade stopped.
No i only see "USB" and "v1.00" on my screen.
The charger led is red.
When trying to upgrade again, i get ether this message:
Error 120, country id error
or
err no device
I located the file "wceusbsh.sys" but still.
After "checking the information on your device" i get the error.
"Error 120, country id error"
How can i solve this problem.
Greg
You're stuck in bootloader. Did you try to upgrade to an other language?
You can try to hard-reset your device 'power & soft-reset' at the same time to boot your magician.
If it doesn't boot, kick it back in bootloader 'camera & power & soft-reset' at the same time for several seconds, till screen turns black & read 'serial v1.00'. When connected to usb it reads 'usb v1.00'
Now get maupgradeut_noid.exe from the ftp. Unzip your shipped-rom file you downloaded from TMO. Put the maupgradeut_noid.exe in the same folder as the unzipped files like maupgradeut.exe, enterbl.exe etc. Then execute maupgradeut_noid.exe instead of maupgradeut.exe this will give the error 120 once more. Just exit & execute it again, now it should proceed upgrading.
Cheers, M
=(
Same problem! Trying to use no id upgrade . I hope it will solve my problem.
P.S. DO NOT upgrade ROM when batt is lo =)

help ,when update Dopod(CHT) to Qtek(ENG), ActiveSync broke.

when I updated my Dopod(CHT) to Qtek( UNI_QTEK_WWE_13077_130176_10900_WWE_Ship.exe),I clicked ROMUpgradeUt.exe . First ,It showed Error Country ID Error, I added [CHECKCEID_TYPE]=1 to RUU.conf, and i clicked ROMUpgradeUt.exe again ,the error code disappeared, but when I clicked UpDate , the activesync was broken, it can't connect to PDA, and then it showed CONNECT ERROR. Anybody could help me ! very urgently!!!!!!!
try to use "Maupgradeut_noid" tool . hope it will help on your problem.
help
I have used "Maupgradeut_noid.exe". it alse showed this error.
From your description above, you did NOT use the Ma_upgrade No ID Tool. Read my instructions here: http://forum.xda-developers.com/viewtopic.php?t=54071
help
Where is the Maupgradeut_noid.exe for QTek? I can't find it.
I have used "ROMUpgradeUt.exe" to upgrade.

Need help for Qtek 9000 ExtRom update

Help Help!!! Recently I try to update my qtek 9000 to Jwrightmc 2.12.8 , once I finished update it start normally till e mail set up, but instead of doing autorunsetup main screen appears, I re download few different Roms and repeat the operation few couple of times but protocol version (42.51.P8) is not changed, then I installed ExtRom.exe the message ok to reboot appears, once it turn on an error message appears that “An unexpected error has occurred in extrom.exe select quit and then restart this program …” I selected details icon at the bottom, this screen says that “ ExtROM.exe Directory not found exception An error message cannot be displayed because an optional resource assembly containing it cannot be found at system.IO._Error.WinIOError()….
Normally I used to get the answer very easily by searching in your forum but this time I couldn’t
If any body knows how I can solve this problem it will be very grateful
Thanking you in advance.
Qtek 9000
Jwrightmc 2.12.08
Protocol V 42.51.P8
Radio 1.15
2GB SD
q9000 said:
Help Help!!! Recently I try to update my qtek 9000 to Jwrightmc 2.12.8 , once I finished update it start normally till e mail set up, but instead of doing autorunsetup main screen appears, I re download few different Roms and repeat the operation few couple of times but protocol version (42.51.P8) is not changed, then I installed ExtRom.exe the message ok to reboot appears, once it turn on an error message appears that “An unexpected error has occurred in extrom.exe select quit and then restart this program …” I selected details icon at the bottom, this screen says that “ ExtROM.exe Directory not found exception An error message cannot be displayed because an optional resource assembly containing it cannot be found at system.IO._Error.WinIOError()….
Normally I used to get the answer very easily by searching in your forum but this time I couldn’t
If any body knows how I can solve this problem it will be very grateful
Thanking you in advance.
Qtek 9000
Jwrightmc 2.12.08
Protocol V 42.51.P8
Radio 1.15
2GB SD
Click to expand...
Click to collapse
Hi welcome to the forum
If you already READ the Wiki and couldn´t find solution, I would recommend to reinstall form cero another ROM, perhaps is a compatibility problem
Good luck

Application starting up..

hi...I have this problem: I installed an app that told to be an alarm clock, but instead it was something else. I erased it from the phone, but everytime the phone starts an error message appears telling me that it can not execute that app. it also appears everytime the gps connects. I tried looking in the registry with tc but I can not find anything. can anyone help me?where to look?? i also tried an antivirus thinking it was a virus but it did not find anything.
Check windows\startup folder
Zecanilis said:
Check windows\startup folder
Click to expand...
Click to collapse
tried there still no luck..now the message appearse even when I connect the phone to the pc.
the programs in the startup are:
btdwake
capnotify
poutlook
sddaemon
settimezoneinfo
wifiinit
can someone tell me what those programs are?
thank you in advance
hi again...I found out that that damnned program installed a System Wide Notification Event, that's way I can't find who is lanching that message..now the problem is that I can't find any software to delete that notification event,so if anybody knows something plssssss help...
below is a link to what I found out :
http://msdn.microsoft.com/en-us/library/aa922523.aspx
use sktools
thanks for the tip Zecanilis

Rhodium bluetooth not working!!!!!!!!

hi i'd like to know if theres someone who can fix this problem i have, when i go into communications to turn my bluetooth, it wont turn on, a window pops up and tells me it cant turn on, i cant even access the setting for it.
also everytime i start up my Rhodium, a error window pops up and says
BTTrayCE.exe
'BTTrayCE' is not a valid Pocket PC application.
someone plz help me with this thank you
DjSoundScan said:
hi i'd like to know if theres someone who can fix this problem i have, when i go into communications to turn my bluetooth, it wont turn on, a window pops up and tells me it cant turn on, i cant even access the setting for it.
also everytime i start up my Rhodium, a error window pops up and says
BTTrayCE.exe
'BTTrayCE' is not a valid Pocket PC application.
someone plz help me with this thank you
Click to expand...
Click to collapse
hi have you installed tomtom by any chance if so have a look here http://forum.xda-developers.com/showpost.php?p=4362258&postcount=6
cheers
DjSoundScan said:
hi i'd like to know if theres someone who can fix this problem i have, when i go into communications to turn my bluetooth, it wont turn on, a window pops up and tells me it cant turn on, i cant even access the setting for it.
also everytime i start up my Rhodium, a error window pops up and says
BTTrayCE.exe
'BTTrayCE' is not a valid Pocket PC application.
someone plz help me with this thank you
Click to expand...
Click to collapse
I have the exact same problems. I suspect the BTTrayCE error is from installing a version of tomtom that doesnt work on this phone (which i did do).
Any help regarding the bluetooth would be appreciated as mine behaves the same as described above (it basically only gives the option of connecting to bluetooth headphones...)
You will have to do a hard reset. You'll lose all your installed programs and settings.
If you remove the bluetooth drivers from the TomTom CAB you'll be able to install it without messing up the bluetooth (google to find a program to do this).
DuncanMcCloud said:
I have the exact same problems. I suspect the BTTrayCE error is from installing a version of tomtom that doesnt work on this phone (which i did do).
Any help regarding the bluetooth would be appreciated as mine behaves the same as described above (it basically only gives the option of connecting to bluetooth headphones...)
Click to expand...
Click to collapse
I got it sorted, did as was said on page 7. You must use total commander.
solution to tt7 bluetooth mess up
no need to hard reset. just rename and delete the following files and soft reset your device. woked for me.
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
ive got the same problem, but i cant find the files. its in device\windows right?? where else might the files be?
Rename the files and replace them with the ones mentioned above. It fixed my problem.
DuncanMcCloud said:
Rename the files and replace them with the ones mentioned above. It fixed my problem.
Click to expand...
Click to collapse
I'm using Total Commander. When I try to rename the file, the file name remains as the original. When I try to delete the file, the screen tells me that it cannot delete the file. I have not installed Tom Tom or anything else. Help?

Categories

Resources