Related
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
If your car kit supports the A2DP profile for Audio over Bluetooth and you select the option to use it all the audio from TomTom will be via the car kit, check what your car kit is capable of supporting - Mike
vriesfde said:
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
Click to expand...
Click to collapse
I'm using btaudio
greetz
Thanks for the tips!
My Nokia carkit does not support A2DP, it's the old CK-7W type....
I will try the above attached btaudio once more. Previous attempts using this program were not succesful, I believe the bt hardware of the artemis was not recognized.
I remember that on my IPAQ 5550 I changed a registry setting, enabling audio over BT, but I could not find such an entry in the Artemis reg.
Keep you posted on progress, and thanks sofar!
Succes!
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Hi guys,
I'm a newbie here, and was pointed to your excellent forum from one of the Mods over at pocketgpsworld.com.
I am running copilot 6 on an O2-registered xda Orbit, using a scala rider headset, on my motorbike, and i need to install btaudio.cab to mt xda in order for the insturctions to be relayed to my earpiece. My question is this - whereabouts to do i need to upload the file to on my xda (obviously somewhere in the copilot files, but i'm not sure where!!) and do i need to unpack it first?
Any help or tips gratefully recieved!!
Welsh Biker
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
vriesfde said:
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Click to expand...
Click to collapse
Graag gedaan
Your welcome and when a call comes in it work ok
Gajet said:
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
Click to expand...
Click to collapse
That's brilliant, many thanks. I did as you said, and it is now working perfectly.
Once again, many thanks indeed
Welsh Biker
i have a orbit and i installed the btaudio cab but unfortunately it doesnt work for me. do i need to change any other setting for it to work properly? i am using a motorola hs350 headset. i am trying to use it to listen to music on my headset instead of the internal speaker. i tested tomtom6 with it and that is still being heard on the speaker and not the headset. thanks
Connect the headset to the Artemis first, then run BTAudio, switch to "on" and then minimize don't exit the program.
Have you got software that closes apps by pressing the x button or something, so that you keep switching the app off when activating tomtom etc.
how silly of me, checked settings menu, connections menu everything except the program menu!!!
Thanks a lot mate
Hi,
I seem to be having the same problem as some of the other guys. The Bt software is installed on my Orbit, I pair the phone with my car then switch the software on. At this stage the TomTom voice stops coming from the phone but doesn't come through the handfree either. If I switch the software off again the sound returns to the phone.
Is this being caused by the format of the handfree kit in my car as mentioned on the first page of this post?? How would I positively confirm the format of my handsfree kit?
Cheers
Rob.
i try to install and it works, but when i turn on audio my radio goes in mute, is possible to send the sound only when tomtom talk?
Hi all
I also need help with audio features. Is there an app that will send all audio through the head phone socket (connected to autocom on motorbike) and phone calls through bluetooth have tryed the app in this tread but it wont split it only redirects all audio?
PS sorry for the high jack of your thread just seemed a good place to ask this.
Dear all,
I´m desperately trying to get the VOIP function running. I´ve read the whole 72 pages of the VOIP thread, but no success.
My phone is connected to the VOIP provider, I can call other parties and I can receive calls.
My problem: While the other party can hear me, I do not hear ANYTHING on my Artemis. Not with the built in speaker, not with stereospeakers, not with bluetooth and not with the wired headset.
I´ve tried nearly everything, but no success
Any ideas anyone???
Regards,
Ingo
Same problem here...
burli said:
Dear all,
I´m desperately trying to get the VOIP function running. I´ve read the whole 72 pages of the VOIP thread, but no success.
My phone is connected to the VOIP provider, I can call other parties and I can receive calls.
My problem: While the other party can hear me, I do not hear ANYTHING on my Artemis. Not with the built in speaker, not with stereospeakers, not with bluetooth and not with the wired headset.
I´ve tried nearly everything, but no success
Any ideas anyone???
Regards,
Ingo
Click to expand...
Click to collapse
I also have exactly the same problem. No sound what so ever ... With SJPhone everything is quite OK but through external speaker. I wanted to have the native VOIP running mostly for using internal speaker... If any body has any good hack for it please share it.... Thanx, Babak
Solved!
burli said:
Dear all,
I´m desperately trying to get the VOIP function running. I´ve read the whole 72 pages of the VOIP thread, but no success.
My phone is connected to the VOIP provider, I can call other parties and I can receive calls.
My problem: While the other party can hear me, I do not hear ANYTHING on my Artemis. Not with the built in speaker, not with stereospeakers, not with bluetooth and not with the wired headset.
I´ve tried nearly everything, but no success
Any ideas anyone???
Regards,
Ingo
Click to expand...
Click to collapse
I solved the problem! The problem that we couldn't hear anuthing because it doesn't allow sip on 5060 port. What you have to do you just change the following registry:
HKLM\System\VoIP\SIP
EnablePort5060 = "1"
when it's "0" you don't get the port open and that's why you don't hear anything. It worked for me I hope it works for you as well. In addition it's realy nice cause you get the sound coming from the internal speaker
Regards, Babak
babak_73 said:
I solved the problem! The problem that we couldn't hear anuthing because it doesn't allow sip on 5060 port. What you have to do you just change the following registry:
HKLM\System\VoIP\SIP
EnablePort5060 = "1"
when it's "0" you don't get the port open and that's why you don't hear anything. It worked for me I hope it works for you as well. In addition it's realy nice cause you get the sound coming from the internal speaker
Regards, Babak
Click to expand...
Click to collapse
Didn´t work for me
Same problem with me and my p3300 with WM6 leaked from HTC.
SIP client is working almost perfectly, but i can't hear anything. Registry trick didn't help.
It did not work for me either with the leaked WM6 ROM. I still have no inbound sound. I do not even get the tone during dialing.
I solved the problem! The problem that we couldn't hear anuthing because it doesn't allow sip on 5060 port. What you have to do you just change the following registry:
HKLM\System\VoIP\SIP
EnablePort5060 = "1"
when it's "0" you don't get the port open and that's why you don't hear anything. It worked for me I hope it works for you as well. In addition it's realy nice cause you get the sound coming from the internal speaker
Click to expand...
Click to collapse
Didn´t work!
No possible to change this bug?
babak_73 said:
I solved the problem! The problem that we couldn't hear anuthing because it doesn't allow sip on 5060 port. What you have to do you just change the following registry:
HKLM\System\VoIP\SIP
EnablePort5060 = "1"
when it's "0" you don't get the port open and that's why you don't hear anything. It worked for me I hope it works for you as well. In addition it's realy nice cause you get the sound coming from the internal speaker
Regards, Babak
Click to expand...
Click to collapse
Could you please export your whole registry?
It seems that there must be something else what worked for you.
No success up until now...
Try this...
Hi Guys,
Sorry for a bit late in reply. Here is to go: First try to install the attached CAB file. After reset change the registry as mentioned above and then reset. Use SIP configuration to set up your account (for example your VOIP-Buster) Then first your WLAN on and then VOIP calling. When you get connected to SIP server make your call. The sound quality is not perfect and surely needs lots of improvement. But at least it's working. Let me know whether it works.
Regards, Babak
Doesn't work for me, i try several times different wm6 voip.cab and always the same... i can connect, i can call, people heard me, i have no sound...
Try the same with a wizard (same voip cab, same voip provider), works with one rom (but with the external speaker), doesn't work with others...
With Artemis, all roms i try doesn't work.
Wich rom do you use ?
SuperMimi said:
Doesn't work for me, i try several times different wm6 voip.cab and always the same... i can connect, i can call, people heard me, i have no sound...
Try the same with a wizard (same voip cab, same voip provider), works with one rom (but with the external speaker), doesn't work with others...
With Artemis, all roms i try doesn't work.
Wich rom do you use ?
Click to expand...
Click to collapse
I use PDAVIET Rom Back&Blue v3 . It works quite well for me actually. There is only one problem: when I receive a call through my VOIP number most of the times I hear them but not the other side! When you make calls evrything seems to work just fine.
babak_73 said:
I use PDAVIET Rom Back&Blue v3 . It works quite well for me actually. There is only one problem: when I receive a call through my VOIP number most of the times I hear them but not the other side! When you make calls evrything seems to work just fine.
Click to expand...
Click to collapse
Do you have install other software ?
Or change the ipdialplan ?
SuperMimi said:
Do you have install other software ?
Or change the ipdialplan ?
Click to expand...
Click to collapse
I don't understand.....
I try another voip cab (voipfr.cab) reset, retry... and it works (without having change the registry with 5060 at 1) with the external speaker (not very high level)....
Very weird !!!!
SuperMimi said:
I don't understand.....
I try another voip cab (voipfr.cab) reset, retry... and it works (without having change the registry with 5060 at 1) with the external speaker (not very high level)....
Very weird !!!!
Click to expand...
Click to collapse
Have you tried to receive calls through your voip number also? Do they hear you from other side? Yes, indeed the sound quality is really bad. I still use SJPhone with headset with has great sound quality.
babak_73 said:
Have you tried to receive calls through your voip number also? Do they hear you from other side? Yes, indeed the sound quality is really bad. I still use SJPhone with headset with has great sound quality.
Click to expand...
Click to collapse
Yes I can receive call and all works.
(I just modify the ipdialplan to change the caller ID from sip:[email protected] to only xxxxxxxx).
By the way, if it can help others people, I've installed voipfr.cab found here :
http://freud.e-diffusion.net/glofiish/Applications/VoIP/VoIPFR.CAB
(After install wm6voip.cab (from VI Black & config....) and without uninstall this one.)
Mix of different files and version...
Work in my Artemis with leaked HTC 3.5 and last OS 3.7 from Dopod Asia.
Work with external speaker.
Hope it can help somebody
Just install and config your SIP provider, eventually change ipdialplan.xml...
Great!!
it works fine now, but the quality is pretty poor, pls if someone knows how to get better quality pls share if possible. thx guys.
ryu101 said:
it works fine now, but the quality is pretty poor, pls if someone knows how to get better quality pls share if possible. thx guys.
Click to expand...
Click to collapse
Enjoy it can help you, the quality is poor with internal speaker, try a BT headset or wire headset, quality if a little better (very little).
I'm fairly new to this and really appreciate all the excellent work done here. I've been researching for days on making my device send sound to the headset. Can someone point me in the right direction? Really would appreciate it.
I have been using Pandora's Kitchen to make new ROMs for my 8525. It's awesome BTW.
What I'm trying to do is get ALL sounds to my BT HS. Voice Commander, rings, alarms, etc. just won't do it. I was thinking there must be someway to program or direct each "category" of sounds to a specific device.
Thanks in advance.
BT
I'll reply before you get hounded about using google/wiki/search...
Search for the cab file "destination gotland bluetooth mono". Works perfectly and switches all audio to the BT headset or back to the tytn. Does not solve the Microsoft VoiceCommand issues, thats a different search and solution.
Thanks for the help... it worked.
Your assistance is much appreciated. For the record, I did research and search like crazy.
Thanks again.
Does this allow me to make the ringtones and sounds come out of my device if I have a STEREO bluetooh. I've been turning off my bluetooth in order to get rigntones to the device. I don't like having the bluetooth on my head at all times, and don't know if I go a call when the bluetooth is on because my device won't ring.
can anyone post cab for my tp2? thank you
I would like to have this CAB too, missing voicedailing on my TP2
I try this , it work well on mic of phone, but it don't work on BT activate.
CVSD for WM6 v1 2 build 61226 1 cab
http://www.filestube.com/bbd28aaa9252901403ea/details.html
How come the bluetooth does not work? is it due to a setting of the phone, or just not possible? because I installed the voice dailer and it works, however when I try to start the voice dailing with my BT headset it does notting. I have to manually call someone. On the diamond, which I had before this one, this worked flawlessly.
So does anyone know anything about this, or should I use a different tool to use voice dialing with my BT headset?
flux20 said:
How come the bluetooth does not work? is it due to a setting of the phone, or just not possible? because I installed the voice dailer and it works, however when I try to start the voice dailing with my BT headset it does notting. I have to manually call someone. On the diamond, which I had before this one, this worked flawlessly.
So does anyone know anything about this, or should I use a different tool to use voice dialing with my BT headset?
Click to expand...
Click to collapse
yes, I need to know too.
spend a whole day in cyberspace to solve this problem...this is what worked on my Diamond2 (with WM 6.5 ROM):
http://forum.xda-developers.com/showthread.php?t=463090
see #7
Check Registry Settings:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"VoiceCmdEnable"=dword:00000000
"LaunchAPEnable"=dword:00000000
Hope it helps!
The touch pro2 can't carry out the voice speed dial function with my bluetooth headset.
tap the call handling button on the headset can not make anything happen. Neither by press and hold the button.
The only function still remain with the sony-ericsson HBH-DS970 is double tap the call handling button on the headset to re-dial the last number.
The voice speed dial function is very useful when your hands is busy, such as driving. What can I do now?
I have two bluetooth headset, one is sony-ericsson HBH-DS970 and the other is SIEMENS HHB-750.
The software I use is cyberon Voice Speed Dial V1.2.
The following is an answer from HTC:
"I do not know how you have got Cyberon installed as it is not instaled on the device by default.
I therefore cannot give you any support as the devices do not have any voice command software installed out of the box.
best regards,
HTC Europe Support"
I can't have anymore words on this.
Correct it doesn't work There are a number of threads about this around here.
I use Microsoft Voice command and have to (long) press the send key on the phone then it kicks in through the Bluetooth car kit. The general theory is this is a side effect of the change in Bluetooth stack made on this phone, I'm sure we'll see a fix, but probably not until we start seeing cooked ROMs.
Gordon
All you can do is to change the settings for the Send button to launch CVSD when you hold it, but for doing this with your headset's button, unfortunately you'll have to wait... for another ROM...
all the best
Reporting in from Canada here... after reading a couple of threads about issues with bluetooth voice dial, I got concerned and tried it this evening with my Jabra BT3030 and Telus TP2. Voice dial using the included MS Voice Command software works properly when I press the voice dial button on the BT3030. So... the problem isn't universal; we have at least some bluetooth devices out there that work properly with voice dialing on a TP2.
Hope that helps,
--VelJharig
VelJharig said:
we have at least some bluetooth devices out there that work properly with voice dialing on a TP2.
Hope that helps,
--VelJharig
Click to expand...
Click to collapse
Would you please list some detail information,such as type number, of the bluetooth devices which work perfectly on voice dial?
I seached on this forum and many other chinese forum, almost all of them report the voice dial can't be launch for the call handling button on the bluetooth device.
Thanks in advance.
net_walker said:
Would you please list some detail information,such as type number, of the bluetooth devices which work perfectly on voice dial?
I seached on this forum and many other chinese forum, almost all of them report the voice dial can't be launch for the call handling button on the bluetooth device.
Thanks in advance.
Click to expand...
Click to collapse
Hi net_walker,
I'm not sure if I correctly followed your question, but if you're asking for the model number of bluetooth devices that seem to work with the TP2, I gave that in my original post. It is the Jabra brand, model "BT3030" that works correctly for me on my Telus TP2. The basic web page for the model is here:
http://www.jabra.com/Sites/Jabra/na-us/Headsets/Pages/JabraBT3030.aspx?productfamilytab=Details
On that website, they list it as the model BT3030, with what I believe is an extended specific model number of "(100-93030000-60)".
Hope that is helpful,
--VelJharig
mmmh ! Very interesting !
At first time, i've thought for a BDR tweack to solve the problem.
Now it sounds like it is radio Rom dependant...
VelJharig said:
So... the problem isn't universal; we have at least some bluetooth devices out there that work properly with voice dialing on a TP2.
Hope that helps,
--VelJharig
Click to expand...
Click to collapse
That's great news! Hopefully this will give the chefs here something to work with.
Gordon
In the forum, i'v seen somebody who had posted the Telus TP2 Sys and OEM's. I'm dowloading it and trying to analyse the OEM concerned with Ms Voice Command. Hope it can help us to solve the prob.
Schmurtz1968 said:
In the forum, i'v seen somebody who had posted the Telus TP2 Sys and OEM's. I'm dowloading it and trying to analyse the OEM concerned with Ms Voice Command. Hope it can help us to solve the prob.
Click to expand...
Click to collapse
I'd be that person. If you need any other details regarding file info from the device, just let me know.
Thanks for your share.
Because at this moment we didn't have an HardSPL from our dear Olinex Team (hope they do there home work (lol)) to make a cooked rom, i'm looking for something like OEM to CAB to test the OEM into my TP2 and maybe solve the problem for all of us who can't use Bth button to make a voice call.
VelJharig said:
Hi net_walker,
I'm not sure if I correctly followed your question, but if you're asking for the model number of bluetooth devices that seem to work with the TP2, I gave that in my original post. It is the Jabra brand, model "BT3030" that works correctly for me on my Telus TP2. The basic web page for the model is here:
http://www.jabra.com/Sites/Jabra/na-us/Headsets/Pages/JabraBT3030.aspx?productfamilytab=Details
On that website, they list it as the model BT3030, with what I believe is an extended specific model number of "(100-93030000-60)".
Hope that is helpful,
--VelJharig
Click to expand...
Click to collapse
Hi, everybody,
Did someone know some other bluetooth headsets work with Touch Pro2 to carry out the Voice dial function,except this one "Jabra BT3030" ?
Yes, I have the Tmobile TP2 and the Bluetooth voice dial function works with the MSVC that came with the phone. There is a 5-7 seconds wait until the microphone activates. So after I hold down the call button on the ear piece for few seconds to activate voice command, I have to wait till I hear a second sound that tells me the phone is now listening. Other than this, it works just fine.
Its an old plantronic bluetooth ear piece, dont remember the model number, but its the one with silver stripes down the length of the device on the sides. Its in my car, I will check later and add that if anybody needs the number.
My Plantronics headset can call voicedial the same way it did on my Kaiser - a long press of the "call" button.
Genesis3 said:
My Plantronics headset can call voicedial the same way it did on my Kaiser - a long press of the "call" button.
Click to expand...
Click to collapse
Hmmm, very strange.
I have a Plantronics Discovery 925 myself and it's supose to be one in the winner team of Plantronics, but still nothing
And I have to say that it works just perfect with Touch Cruise, Diamond and HD.
Not with this one. You're sure you didn't done anything to your phone regarding this?
all the best
Nope - one of the first things I checked when I got the phone, it worked right out of the box before I started hacking on the registry and such.
DesperateScorpion151 said:
Yes, I have the Tmobile TP2 and the Bluetooth voice dial function works with the MSVC that came with the phone. There is a 5-7 seconds wait until the microphone activates.
Click to expand...
Click to collapse
I can confirm that issue on the T-Mobile Touch Pro 2. It is a VERY long time to wait for MSVC to start listening. I wish there was a way to put the standard Bluetooth stack on here so that Voice Command would work better.
I use a variety of Bluetooth headset devices; BlueAnt S1 car kit, BlueAnt Interphone (motorcycle helmet kit), Nextlink G5, Motorola 850 Stereo headphones... and all have the same slowness for activating MSVC.
I have a MOTOROKR™ T505 and if I hold the button down it'll do last number redial but I have to hold the dial key on the phone down to get Cyberon to listen.
Can't use MSVC as it won't understand me. Lot's of humans have this problem too so it's no surprise
Anyone get anywhere with this ?
Is it fixed in 6.5 or are there any ROMs with a fix cooked in ?
I have the same problem with my SE bluetooth
I have a Tilt2 (wm 6.5) stock with a Motorola H17 and voice command works fine. About 2-3 sec after headset button push and MSVC is listening.