Wireless network managment and LEAP - MDA III, XDA III, PDA2k, 9090 General

Where I can get help to activate the LEAP protocol over the WiFi network in the SX66, I already configure it, but I can not get it activated, as a matter of fact when there are many Wifi networks, I do not know how to manage profiles of them, in order to activate one or the other ?, please any help is welcome, thanks
Bdo
NOTE : I already checked the user guide, and they do not mention anything.

I didn't see anything about LEAP, but DL the tril version and give it a try:
http://microsoft.handango.com/Platf...pe=2&productId=163641&sectionId=0&catalog=30&

Related

Windows Live Messenger vs TMobile settings

Installed the Black Satin rom today - amazing btw! - and I've been wrestling with WLM all day. It did work at first but then stopped completely saying I was in an area with bad data coverage. ALthough I'm getting full H and 3G speeds.
After a hard reset, I tried WLM using wireless before I applied to Tmob settings and again, it worked perfectly. Drop Tmob back on and it dies again.
Anyone had this before and does anyone know of a workaround so I can have my 3G and WLM on the same handset.
Many thanks and keep up the good work. There's enough cabs on here to keep me entertained for days!!!
D-Jac
Just a quick question, are you putting in the T-Mobile settings manually, or via a CAB from here? I know most of the early CABs had a proxy hard-coded into them that could be causing problems. Let us know what country you're from and I'm sure someone'll be kind enough to give you the settings to put in. If it's UK, then:
Start > Settings > Connections > Connections
Advanced tab > Select Networks
New > Name it T-Mobile Internet and then click on the Modem tab
New > Name it T-Mobile Internet and select Cellular Line (3G)
Next > Access point is general.t-mobile.uk
Next > Finish
OK back outa few times and you're done.
Like I said, if it's not UK, this won't work! Also, if the problem isn't related to this - sorry!
Yeah, I added my T-Mob UK settings via the HTC tool that does it via ActiveSync. It added in an HTTP proxy that I couldn't delete. Strange, 'cos when I bought my Vario II it had no proxy defined.
When the proxy was there I could not access WLM. When I used a different CAB to re-add the settings, I could.
However, Agile Messenger still won't connect at all to AIM or MSN. Gawd knows why?!
Sorry - yes, I'm on T-mobile UK with web n walk. I found a cab on one of the wiki pages for T-mobile UK which is the first one I tried and didn't work. After posting here last night, I used the UK_Setup_ZD.exe program to load the T-mob settings and it still didn't work.
If anybody might be able to point me in the direction of a clean/usable T-Mob file that would be ace.
Thanks for the suggestion to load the settings manually. Before I cleared my phone of WM5, I followed the mrvanx guide to housekeep my existing setting but there is a starred out password in the connection for T-Mob internet so I couldn't set it.
As always, any help muchos appreciated!
If you're on T-Mobile UK, you don't need a username and password (trust me!). If you want, look up the details on the T-Mobile Help and Support website and it gives you step by step instructions on setting up the connections manually, that's where I got the above instructions from.
Oooh? Will try in and see how we get on. My searches have also lead me to other posts which think it may be a proxy settings, as the Tmob cab won't allow you to change the proxy.
I'll keep experimenting and will report back!
Confused Stu - YOU ARE A STAR!
Did a hard reset, back to a clean version of Satin. Input the details with no username and password and all seems to be working. Now all I need is to be able to stop it syncing every two seconds, but I shall have a mosey around the pages for the answer to that one and why I can't make it try wireless before dialling.
You've been a great help - cheers!!!
I had the same problem as you did after upgrading to Black Satin (starred out password in the T-mobile settings). I can confirm that you don't need the username or password to get it working.
Cheers,
Doogs

Problem: Internet Sharing

Hi, With my old TP1, I had no problems with ICS. I just got a TP2 yesterday, it's a refurb, so when I followed boo boo's tutorial on ICS with USB, under "network connection", I still get <none>, and can't choose the provider. I hard resetted, followed step by step, and still the same result. Anyone has any clue as what might be the problem? Thanks in advance
This worked for me, No need for cab or registry editor. I didn't write this and cant remember who did. Tried to find the post but couldn't. So who ever did write this THANKS because it worked for me.
Instead of hacking the registry, the phone is just set to use the AT&T ISP connection. Go into Internet Sharing, select Menu, Connection Settings, select Manage existing connections under AT&T ISP. On the next screen AT&T ISP GPRS should already be selected, tap edit.select next. The Access point name (APN) will say isp.cingular, this is the official tethering APN, change it to wap.cingular (the APN for phone internet browsing). select next. make sure user name, password, and domain are all cleared out, then select finish. Now go back to Internet sharing and all should be well. This will erase information needed to officially tether, but if you're doing this then you didn't intend to pay for it anyway. If you ever do need the username and password again, you should be able to obtain it via a simple google search or by calling customer service.
My posts are completely informational/educational. I bear NO responsibility for anyone messing up their phones or for anyone stealing (tethering without paying for it) from at&t Mobility.
sorry for the long post, just wanted to be detailed.

Portable hotspot solution for simple mobile users with SGH-T989

As I could not find a thread about this specifically, I am posting this solution as it works for me.
On the Galaxy S2 SGH-T989 is where this pertains to though other users might encounter similar problem with other phones on simple mobile.
Stock 2.3.6 Rom
When you turn on the portable hotspot feature with this phone, what it does is disconnect your "Simple Mobile" APN and inserts and connects using a new APN called "Tethering". When you try connecting with your PC to your hotspot's ssid, it takes you to a web page on t-mobile.com informing you with an error 503 or some other error stating that its not available. I assume t-mobile is detecting that you are not their customer and blocks it.
it takes you here:
-------------------------------------------------------
http://androidapi.t-mobile.com/apppack/mvno.html
Error 503--Service Unavailable
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.4 503 Service Unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
---------------------------------------------------------
The reason is because that APN tries to connect to "pcweb.tmobile.com". What you have to do is once you activate your hotspot, you have to edit the apn (while it is running) and change it from pcweb.tmobile.com to simple.
No other setting is needed. I am using "APN manager" which I paid for on the market and it is well worth it. I have used it for other purposes besides this and it allows you to edit the APN while it is live. Hope this helps other simple mobile users...
Also, you have to edit this "Tethering" APN every time you run the hotspot and delete the last one as it will just keep adding the new one with the t-mobile settings every time.
Anyone else out there with another solution please post it..
pcdocta said:
As I could not find a thread about this specifically, I am posting this solution as it works for me.
On the Galaxy S2 SGH-T989 is where this pertains to though other users might encounter similar problem with other phones on simple mobile.
Stock 2.3.6 Rom
When you turn on the portable hotspot feature with this phone, what it does is disconnect your "Simple Mobile" APN and inserts and connects using a new APN called "Tethering". When you try connecting with your PC to your hotspot's ssid, it takes you to a web page on t-mobile.com informing you with an error 503 or some other error stating that its not available. I assume t-mobile is detecting that you are not their customer and blocks it.
it takes you here:
-------------------------------------------------------
http://androidapi.t-mobile.com/apppack/mvno.html
Error 503--Service Unavailable
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.4 503 Service Unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
---------------------------------------------------------
The reason is because that APN tries to connect to "pcweb.tmobile.com". What you have to do is once you activate your hotspot, you have to edit the apn (while it is running) and change it from pcweb.tmobile.com to simple.
No other setting is needed. I am using "APN manager" which I paid for on the market and it is well worth it. I have used it for other purposes besides this and it allows you to edit the APN while it is live. Hope this helps other simple mobile users...
Also, you have to edit this "Tethering" APN every time you run the hotspot and delete the last one as it will just keep adding the new one with the t-mobile settings every time.
Anyone else out there with another solution please post it..
Click to expand...
Click to collapse
Have you tried foxfi and wifi tether?
Looks like a good alternative. Thanks..
Sent from my SGH-T989 using XDA
Thanks!
This thread saved me! While I did not follow the instructions, it got me thinking to check the apn settings on my phone. As it turned out my apn was changed to a different apn when i turned on my hotspot and all I had to do was select my original apn again and tethering began to work! Awesome!
I'm using a freetel FTU152D (Samurai Kiwami) on Simple Mobile. It does change the APN every time I turn on the Hotspot, but fixing the APN settings doesn't seem to do anything; other devices connect to the wifi, but still can't see the internet. Meanwhile, I still have internet access on the FTU152D. Any ideas?
RichSPK said:
I'm using a freetel FTU152D (Samurai Kiwami) on Simple Mobile. It does change the APN every time I turn on the Hotspot, but fixing the APN settings doesn't seem to do anything; other devices connect to the wifi, but still can't see the internet. Meanwhile, I still have internet access on the FTU152D. Any ideas?
Click to expand...
Click to collapse
I've used my FTU152D as a Wi-Fi source using the dialog in settings and it works fine. Other devices can connect. My FTU152D is rooted with kingroot, however, would that make a difference?
nazcalito said:
I've used my FTU152D as a Wi-Fi source using the dialog in settings and it works fine. Other devices can connect. My FTU152D is rooted with kingroot, however, would that make a difference?
Click to expand...
Click to collapse
I rooted mine early on with kingroot, but unrooted it when I couldn't find any third party ROMs. I think I tried the Hotspot while it was rooted, but I don't remember for sure. I'll have to try it again.

Sprint Moto Z2 Force on Ting (WiFi Calling Missing)

I recently purchased a new Sprint Z2 Force and activated it on Ting (it has only ever been on Ting and never on Sprint directly). Both Sprint and Ting support WiFi calling on this phone, but WiFi calling is not listed under the WiFi settings or in the Call settings of the dialer. However if I search in the settings for WiFi calling, I can see a WiFi Calling Settings in the App Info section, yet there is no way to turn it on or open those settings. I have updated the profile multiple times and also did a factory reset.
Am I missing something or is there something missing in the software since it never got activated directly on Sprint?
Any help/suggestions would be appreciated.
I do the custom rom thing and i sort of remember it just being there however, if you have not already checked "Mobile Networks" - under main phone settings, select "Network & Internet" once there, select "Mobile Network" - you'll see your carrier stuff/APN there I believe if you select "enhanced 4G LTE Mode" (you may have to make LTE you're preferred network mode in order to enable and/or display that option, again this was already there on mine. But see if that opened up any new menu items elsewhere i.e. back in the dialer app settings under "calls".
Did your phone come with a sprint SIM? Do you have the other carrier bloatware on there like Sprint ID? I know what you meant earlier about a possible software bypass, but all of that stuff is deff on the phone somewhere like you observed in App info, it may just be a matter of popping in a sprint SIM card to unleash it..
I continued to look into this for you. Sprint's name for Wifi calling is, well was -"Calling Plus". I found this article that advises one of the recent update removed the feature;
https://community.sprint.com/t5/Buz...alling-PLUS-Service-Decommission/ba-p/1017775
Since you got the sprint version you still have lots of software modification options. I also have sprint z2 foce, but I get better coverage on a GSM netwrok so my device is half sprint\half tmobile and I can deff say the wifi calling works. There's tons of information on here I can always help direct ya, but at least you're not crazy it WAS there.
lastly just to be sure, this has to be done prior,
"Log into your Ting account online and go to Device settings. Find the device you want to enable Wi-Fi calling for and click the edit icon in the Minutes section."
volcomguyaz said:
I continued to look into this for you. Sprint's name for Wifi calling is, well was -"Calling Plus". I found this article that advises one of the recent update removed the feature;
Since you got the sprint version you still have lots of software modification options. I also have sprint z2 foce, but I get better coverage on a GSM netwrok so my device is half sprint\half tmobile and I can deff say the wifi calling works. There's tons of information on here I can always help direct ya, but at least you're not crazy it WAS there.
lastly just to be sure, this has to be done prior,
"Log into your Ting account online and go to Device settings. Find the device you want to enable Wi-Fi calling for and click the edit icon in the Minutes section."
Click to expand...
Click to collapse
Thank you for all the info so far! Here are some answers and additional info:
My phone did come with a Sprint Sim in it and that is the one I am using. Also there is not any of the Sprint Bloatware on the phone. If I search "Sprint" in my settings area, there is a My Sprint Launcher that is listed as Disabled and there seems to be no way to enable it, which is similar to the WiFi Calling Settings that shows up when I do a search for it in the settings. Also if I look at the Apps and "Show System" apps, Mobile ID is there which is the Sprint ID software I believe, but again it is Disabled with no option to enable it.
The WiFi calling is turned on in the Ting account.
The Calling Plus feature was disabled by Sprint in that link you shared, but that just disables WiFi calling over LTE. It does say regular WiFi Calling should be available.
On my phone when I go to Network & Internet > Cellular Networks> I see my Preferred Network Type which was Automatic, I switched it to LTE/CDMA. That does not seem to have opened any additional settings for me in the dialer or elsewhere.
Thanks again for all your support. If you have any other suggestions, let me know, but you have offered a lot already.

please help me with loading vodafone software to get WIFI calling

Hi, I wonder if anyone can offer any advice - where I work seems to have no phone signal now a days and I need to use WIFI calling. I bought my S20 (G-980F) from samsung online and use it on vodafone network but dont have any option to enable wifi calling. I checked the phone software and found the following:
CSC - G980FOXMFGVL5
CP - G980FXXUFGVL5
AP - G980FXXSFGWA7
WHen I looked online the codes above seem to match Vodafone UK latest versions but I just dont have any vodafone items on the phone - including the WIFI calling option.
I did try to sort this a few years ago and remember downloading ODIn and updating fles but could never solve the problem. I am no tech guru so please go easy on me! What am I missing here? If I cant solve I will have to order a new phone from vodafone so I know it works as I missed a call about my heart scan from the doctor last week and really cant keep missing those calls due to weak phone signal!!
Any help really appreciated
Thanks
Chris

Categories

Resources