XDAIIi touchscreen problem. Need help - Upgrading, Modifying and Unlocking

I've bought a XDAIIi in Singapore yesterday. It ran perfectly as the first time. After that I hardreseted it. When it came to the second screen which asked to touch the screen to continue the process, cos I'm had something to do so I turn the power off by the power button (without touch the screen).
And now, I press power on again to continue the installation but the device stop in the screen "tap the screen to set up your Pocket PC". The touchscreen is not workable. Can anybody help me to fix this stuff? I also need the Asian ROM to upload to my device, please help me.

Can you not just hard reset it again and do it at the first prompt next time?
Ant

Sorry everybody. I've fixed it. The problem is the screen protector which the seller applied in Singapore. I take it out and the screen is "touchable" now...

Related

XDA Orbit Screen Problem

Hi Guys.
I've had my orbit for about 3 weeks now, and its been perfect. I had a spare 512mb microSD card lying about so I used that, but my 2Gb microSD card came in the post yesterday.
I put the card into the phone, and then plugged the phone into my computer via USB. The screen turned off, and no matter what I did, it wouldn't come back on.
I reset it using the small button on the side (sticking my stylex pen into it) and it restarted itself, showing the splash screen no problem, but as soon as you would expect the Today screen to show, the screen goes off. It get's weirder, because if I hold down the camera button to turn that on, the screen switches itself on, and you can use the camera no problem. If i hit the windows key, the menu appears, but if I try clicking an icon, the screen goes dead again.
Also, sometimes (not always, don't ask why) if I leave it for a couple of minutes, the screen slowly appears, as if the backlight is very very dim. But the second i tap anywhere, or touch a button, it goes off again.
I can still answer calls, and my alarms still go off. The phone seems to work perfectly, but just not the screen. I think that it might be the backlight having been turned so far down its off, but I don't know how I would go about reseting that.
Sorry for the long story, but any help would be greatly appreciated.
Cheers
have you tried to make a hard reset?
Man I had the exact sane issue. Its to do with the backlight. I had to angle the screen to try and see anything on it, then changed the backlight to full and made sure it didnt switch off after certain time, everything fine since then. dont know how it happened.
exactly like fubofo wrote,try to unplug,screen should be visible again, check backlight prop.-and plug it in.
i have the same problem this appears sometimes.I think this is a damn bug that appears randomized.It happend to me like 6 times.I have the o2 xda orbit with german o2 rom.What's about yours? it dims the light under the normal makeable settings this sucks.And the camera works because the light settings goes automaticly to the highest settings in camera mode.
Hi guys,
I remember having that problem but it was when I tried some programs, including HTC X-button and another called Invisible Shooter. I haven't got any further incident after uninstalling them.
Do you think what you've encountered with may also link to some program you've installed?
BUSPBP
Totally confirmed! Had same issue after replacing a touch screen. Thanks, guys, for a clue!

Stuck on Align screen (tapping works)

I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Raven_coda said:
I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Click to expand...
Click to collapse
hard rest then hold the 2 buttons next to the volume slider only and press the rest button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
then press the message button on the front that looks like an postal letter
this wil reset the options saved kind of like resetting a pc bios to manufacture defaults .
then try again to do the alignment.
I had similar when I flashed pdaviets rom to my blue angel and that resolved it
Thanks for the reply, unfortunately I broke me screen tinkering with it so I'm not able to test your idea.
I started with two LCDs one with a bad digitizer and one with a broken screen. I touch the digitizer off the one a replaced the other so that I had a working screen but then I had the problem listed above. Before I saw your response I thought I might have some dirt or something under the screen causing it to not work so I took it apart but I guess I was just a little too rough this time and cracked the LCD
I'll have to find a new LCD if I plan to resurrect this phone.
Thanks anyways for the help
stuck in 4 color screen
cyberjak said:
hard reset then hold the 2 buttons next to the volume slider only and press the reset button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
Click to expand...
Click to collapse
I´ve tried everything with my XDA III PH20B1 - no camera model -, but I never get the 3 options screen. Just the 4 colors and bottom right the radio version R 1.10.00.
Is there any other way how to make my O2 XDA III boot after the WM6.1 upgrade ( from 2003se) ?
I have the same problem (I have already reply in another thread...), I am still trying to fix it. I suspect from the backup battery, since before I hard reset my SX66 all programs lost their configuration when I turn off and on again my SX66, and when I tried to realign the screen the align cycle repeated forever. Then I tried hard resetting, reflashing to various OS's and I can not pass the initial calibration screen.
Please keep me posted if someone have found the way to solve it.
Thanks !
no need to upgrade or delete anything from bios,this is not a cause of motherboard and software.I removed the motherboard and essembled in a working screen phone.there is no problem all ok,its not a problem with backup battery too.Then i changed working phone motherboard to cant align phone but same as before it dsnt align.Therefore in my investigation its a problem with the touch or screen.
its not a problem with screen cover too.
If any knows the exact solution for align problem screen ,please post it.
eway - press the power/stand by and leave for 15-30secs
then pen reset, press [cam] + [rec] as the 4 colour screen comes on and change 2/3 - as previously stated countless times - press [mail] to reset - this will reboot your new rom.
touch flo user manual is a little allusive
but, soo much too test, soo little time
#===#===#[]#===#===# . . . . . . . . . . . . . _-=d.b=-_
riya2008r2k - can you plz show some pictures of the internals of a BA ?
I for 1 would be very interested, too see. . .
post a link, please!!
How to bypass Align Screen?
If you have flashed a proper rom/ hard reset your device, there could be some dust on display which won't let the align screen pass. This is a real annoying feature on WM platform. But guess there are always ways to bypass software related issues.
The display can be cleaned by patting a small amount of water on it, and then running the water along with a visiting card on the edges of the screen. This will take off all the dust on the sides, and will let you pass the align screen easily. You can simply wipe the display propely with a glass cleaner.
If this doesn't help then :
When your phone says align screen, connect the phone with computer and get it detected in Active Sync. Next, you could be able to access Tree/Files on your phone. If you are able to do so, then go to startup and delete files directing to Align Screen, if I remb it was "welcome" something. Delete the file, and there won't be any align screen.
or
You can always go for an easier method. Download Code Factory's Remore Screen Alignment (http://www.codefactory.es/en/downloads.asp?id=108). And simply enjoy.
In both of the case, active connection with Active Sync is important. If you are unable to connect your phone, then I believe there ain't any way other than changing the display.
Hope it helps.
wbr
Sonny
O2 Flame
Hello everybody,
I've got a serious problem with my 2 years old O2 Flame: sometimes, when I reboot my pda, I can't realign the screen. And when I can do it, after a while, the left of the screen doesn't respond, or, when I click on it, it's another part of the screen that answers! I flashed the bios already: nothing changed.
@Gerd
Did you try Remote Screen Alignment?
Sonny
wow, that tool is awesome. My digitizer is cracked.
Disillusioned said:
@Gerd
Did you try Remote Screen Alignment?
Sonny
Click to expand...
Click to collapse
How do you do that please ?
Zincubus said:
How do you do that please ?
Click to expand...
Click to collapse
Try steps from this post : http://forum.xda-developers.com/showpost.php?p=1769443&postcount=1
This is for HTC Wizard, but it should work.

[Q] Power Button not working(HTC Desire).!!!!!!

hello fellow desire user's..
i been using my desire for about 6months and suddenly the power button stop responding, i tried to go back to original state (e.g out of the box) and still the power button not working, i also tried to reflash same thing happen nothing,,,
Q: is this a hardware problem?
please help!!!and tnxs in advance..
You are complete stock, so call htc.
ianthugs19 said:
hello fellow desire user's..
i been using my desire for about 6months and suddenly the power button stop responding, i tried to go back to original state (e.g out of the box) and still the power button not working, i also tried to reflash same thing happen nothing,,,
Q: is this a hardware problem?
please help!!!and tnxs in advance..
Click to expand...
Click to collapse
Same thing happened to me though mine was due to me dropping my phone. I would give HTC a call in the first instance and try and get it fixed for free under warranty
My phone is rooted and has a custom rom so i am able to bypass this issue by having the phone wake on track ball and i have downloaded a few apps
screen off and lock (this is then mapped to long press on the search key
quick boot (to restart the phone, this requires root access to work)
after a few hours you get used to the alternative way to switch the screen on and off.
ianthugs19 said:
hello fellow desire user's..
i been using my desire for about 6months and suddenly the power button stop responding, i tried to go back to original state (e.g out of the box) and still the power button not working, i also tried to reflash same thing happen nothing,,,
Q: is this a hardware problem?
please help!!!and tnxs in advance..
Click to expand...
Click to collapse
I had the same problem with the desire HD, happened suddenly installed nolock as a tempory solution, and was going to take it in under warranty for repair. It is caused by a stuck power button. Heres how I fixed mine. As a last resort, I removed the battery sim card cover and battery cover so that all I was holding was the Ali uni body section. with my finger and thumb I began flicking the chrome button with my nail, as if you were flicking a pea accross the table, after about 30 seconds of flicking the little chrome button popped out slightly, when holding it by your ear and pressing it you can now hear a click. Maybe a dust particle or something from my pocket caused mine not sure, but it was moisture or software related. Hope this helps someone who maybe hasthe same problem.
Paul.
i'd say give htc a call
hope u find a solution soon..

[Q] Screen unlock and black out later

Hi all,
May i ask the solution for this problem: sometime when i try to unlock my phone using the home or power button, the screen keep become black back or autolock it back which means when i unlock the screen will have a display, then in a few second it bcome black back.
The problem can be solve after u leave it a while or when ur phone ring of received msg.
Any idea on the problem and the solution. I have format the phone but it seems like the problem may occur sometimes. So is it a hardware or software defect?
Thank you very much

confusing screen burn-in/flickering (first post woohoo)

Hello. This is my first thread, I have downloaded maybe hundreds of ROM's from this site, have read thousands of threads and of course bricked a few phones lmao. Now I am here with a REALLY confusing problem. Without further ado, let's dive in. sry for my bad english btw.
I bought a second hand S9 today. The guy whom I bought the device told me, when he turns off the screen of the device by pressing the power button, black and green lines appear when he turns on again, and after a few seconds, when he turns the screen back on by pressing the power button, the problem disappears he told. I think he said there is a problem in the part called screen flex. (I ain't sure what that is, I need info about that too.) Sorry if you're confused this far, cuz more is coming thru
I got a very useful APK file named "OLED/AMOLED Saver" and installed it on my device, it worked really well and the lines were almost invisible anymore. After a few hours of use, what I noticed was even more confusing. I activated the AoD (Always on Display) feature, coincidentally, while testing the screen, when I locked the device by pressing the power button and the clock appeared on the AoD screen, when I turned on the screen in that way, I noticed that the screen did not burn in as if it was brand damn new. But if I don't wait for the AoD screen to show up and immediately press the power button again, the screen turns on completely and something really, really terrible appears, a mixture of black and green. Now let's come to my questions, I've blown your mind a lot I think.
1- Can anyone explain what's going on here?
2- Is the problem in the screen flex or is it purely software? (AoD thing)
3-Is there anyone who has experienced this and was able to completely solve the problem?
Thank you for spending your precious time. Hope I get a solution..
Hello, I have same problem with my old S9, it seems that is fully hardware issue, as a workaround you can set full brightness - it causes this issue to appear less frequently and another option is cooling down the phone - when display is black/green just lock the screen and put your phone to the freezer for a while - it will work properly until it heats again
Its something about an update made by Samsung https://eu.community.samsung.com/t5...t-bars-black-screen-issue/td-p/1745470/page/4

Categories

Resources