Develop Bugs

BIS dissappears

I have wince 2003 a05 installed in my x50v. I can't see any BIS, although it say s 128M ROM in the system information. Someone said this can be solved by changing the language. But I can't find any wince 2003 ROM (nb0 files) available online. Can anyone tell me how to solve my problem and upload required ROMs? Thanks!

teaonly said:
I have wince 2003 a05 installed in my x50v. I can't see any BIS, although it say s 128M ROM in the system information. Someone said this can be solved by changing the language. But I can't find any wince 2003 ROM (nb0 files) available online. Can anyone tell me how to solve my problem and upload required ROMs? Thanks!
Click to expand...
Click to collapse
you HAVE seen this thread, have you not ??
http://forum.xda-developers.com/showthread.php?t=322498
why bother with 2003 ( not even 2003SE ) - when you can have WM6 ??
~~~
If you don't like it ... all I can find is 2003SE here:
http://www.efsoft.it/romforpdappc.htm
~~~~~

Thanks! Nice website, man!
To be honest, I have tried two ways two upgrade my x50v from 2k3 A05 to WM5 which is a pre-requirement for WM60:
1) use Dell's upgrade program (failed at the last step, formatting rom 30%)
2) use SD image loader with WM50 A01 Eng ROM files (failed at "erasing storage 30%)
I was just wondering if there is any hardware problem of my ROM. Maybe that's why I can't see the ROM in 2k3 A05 system.
I also tried using language change (Japanese <-> English). But it didn't work. I still can't see ROM in my system.
I even tried writing WM60 ROM directly, but also failed at "erasing storage".
Is there any software that can diagnose the ROM?
Thanks again!

who knows from all the playing around you have done that you "muddy" up your device and causes conflicts ...etc ???
I would suggest:
hard reset your device ---That should revert it back to factory settings.
and now you can start FRESH upgrade/downgrade ...etc !!!
If you decided to experiment with the link I gave ...
http://forum.xda-developers.com/showthread.php?t=322498
make sure you read throughly the "required" part of the post before proceeding !!!
""
Attention!
If you have Windows Mobile 2003SE ROM on your device, FIRST, please download THIS ARCHIVE (RAR 32.4 MB) (Mirror),
/ and update your PDA to A01 Windows Mobile 5 ROM.
/ After that, go to Dell site, download official WM5 A02 ROM and update your PDA to WM5 A02 ROM.""

It's a used x50v. I got it a couple weeks ago.
As I mentioned, I can't upgrade to WM5. Leave WM6 alone. Thank you though.

h iapq hx2490 wm6 rom?

Can somebody gives to me some links with working wm6 rom for hp hx2490 ?

http://forum.xda-developers.com/showpost.php?p=1516882&postcount=66

Sorry but the first rom(i a with him) i have it ,can somebody give link(working)for the second one?

And can somebody tell me how to update rom on hp hx2490 onder vista ??????? HELP HELP HELP

??????/ some ideas?

please can somebody give me a link or something with windows mobile 6 for hp hx2490??? here is my e-mail [email protected] if somebody have it and want to send it to me

http://rapidshare.com/files/81915200/WM6.0_5.07.04_HP2000_B18533.rar

and how to instal nk.nbf with out hpruu?

see post with the link to the tutorial above (post 2)

this is not working. hpruu says to me that the rom is not in hpruu list or in hpruu.ini
in .ini a've renamed the file but nothing same errors???

1. is your device in white bootloader mode(buttons 2+4+reset)?
2. after you put it in the grandle you pushed the calendar button to connect?
2. You run the sp32408 update utility sp32408 and after the checks replace the nbf file as described at the tutorial?

From where i can download sp32408 ?

which one
http://h20000.www2.hp.com/bizsuppor...TypeId=215348&prodSeriesId=421399&tx=sp32408

i've tried them all ,but nothing and this" 2. You run the sp32408 update utility sp32408 and after the checks replace the nbf file as described at the tutorial?" is not woking.

Have you succeed to flash any wm6 rom on your device? How you did it? I didn't flashed never under windows vista so maybe this is the problem. And I have an hx2490b not hx2490 and I think the not b series maybe need a different way. But many people did it and If you search in the forum you can find some info. Also if I remember well on 4pda.ru site topic they said that the rom can flash without to use other ruu utility.
So if you flashed the device with a wm6 rom before, use that ruu utility and try to change the nbf file on above post(maype needs to rename it or first leave to pass the check and replace with the renamed file after, use white bootloader mode...)

1 i have 2 os xp and vista
2 i make my rom update under xp
3 my pda is hp ipaq hx 2490
4 here in forum is having in one theme 2 roms for my ppc ,i am with first but i want to be with te second one,but i can't because links doesnt works.

i can't download this
PDAViet WM6 for HP iPAQ 2*** series:
http://www.pdaviet.net/showthread.php?t=15560
Direct Link to Rom !Updated!
1/1 http://sym-viet.com/PhamQuang/HP/WM6...00_PDAVIET.rar
Password: PDAVIET
or
try the old links:
1/2 http://tom-love.net/ROM/HP/WM6.0_5.0...2000.part1.rar
2/2 http://rapidshare.com/files/60450793...part2.rar.htm
can somebody gives working link for this rom?

back to Wm5 from Wm6 Asus P525

hey, i upgraded my Asus P525 to "Latest WM 6.1 version:
by
Alex[DFR] or sp3dev"
and it works great for me.
now i want to remove it from wm6 to wm5 again and i have the Orginal Rom for Asus P525 (V.3.42 Hebrew), i just need to install the Rom and it will back angain to Wm5? (Its Because i still have guaranty and it demands the manufacturer orginal Rom).
thank you very much,
Itay.

There's no problem. The only thing - you would possibly run ASUS.UnlockLangID.exe on your device before you start to flash it - otherwise you may get Wrong Language message.

thankl you very much.
and where can i find ASUS.UnlockLangID.exe? i have p525 and my Orginal Rom is 3.43 in Hebrew.

Download, extract, copy to your device (MiniSD), run....
For the future come to http://asusmobile.net/board/index.php if interested... It was just opened...

You may need to flash the same ROM 2 times to get the extension ROM and partition configuration back.
And...if you used the official WM6 ROM, the bootloader does not accept WM5 cap files, you need to decode the nb0 file and use that instead.

Hi guys
have a P525, originally purchased in UAE(English).
have sucessfully flashed to various WM6 Mobiz roms, v10, 18, 19 etc
now want to revert back to WM5, as PIM does not transfer, etc and many other programs (from WM5 ) do not work in WM6 environement.
Baut cannot revert back to WM5.
- downloaded various ASUS WM5 ROM, WWE, WWE ARA all versions 3.43 etc
- have tried using both bootloaders 06xxxxx and 07xxxxx
- with any official ASUS ROM, always get the following error
ROM image found :\MiniSD Card \Galaxy.cap
Language(English), is compatable with the device language(Unassigned).
then click System- Rom update , and imiditaely get the error:
ROM update cannot be applied to this regions version!
- i have also tried the ASUS.UnlockLangID ( runing this before attempting above update), but no difference, same error.
- i have also tried changing the local in system properties, to English, Arabic, Thai and reatempt falshing with ASUS WM5 roms but always get same error message as above.
PLEASE HELP
starkwong - what do ytou mean ?
"if you used the official WM6 ROM, the bootloader does not accept WM5 cap files, you need to decode the nb0 file and use that instead. "
how do you do this ? decode the nb0 file ?
can you provide detialed steps please.
Any other assitance would be apreciated, thanks guys
thanks

How to downgrade HTC Universal Rom WM6.x to HTC Universal Original WM 5 ROM

Hi. guys.
How Can I downgrade my O2 Exec from ROM 8.2 Tomal to its original ROM WM5 (O2 Exec)
Should I Use task 28 55a first?
And then use WM5 ROM 1.13 (O2 Exec) and then upgrade to WM 5 Rom 1.30 (O2 Exec), or just straight use WM 5 ROM 1.30 (O2)?
Is the SIM locked?
Could someone tell me step by step?
Thx, a lot guys.
Now I'm :
O2 Exec G4 64Mb
WM 6.1 ROM 8.2 Tomal
Radio ROM 1.15

Hello,
I downgrade from Tomal/Ranju v7.7 WM6.1 and Tomal/Ranju v8.2 WM6.1 to WM5 - O2 1.30. 162
1) Original O2 1.30.162 WM5 rom unpack in RAR.
ROM, radio and ExtRom (in Rar Folder "OutPutFile") files copy to Universal RUU - CID Checking bypass.
Code:
http://forum.xda-developers.com/showthread.php?t=301662
2) Give Uni to Bootloader mode - Active sync must be not active. Synchronizacion is not active.
(Bootloader mode - holding the BACKLIGHT_BUTTON and the POWER_BUTTON and then pressing the RESET button)
3) Plug Uni to PC and wait for Win detect Uni.
4) Run RomUpgradeUt.exe and flash O2 rom, radio, extrom
Its works.
Or read Wiki
P.S sorry my English

antonny said:
Hi. guys.
How Can I downgrade my O2 Exec from ROM 8.2 Tomal to its original ROM WM5 (O2 Exec)
Should I Use task 28 55a first?
And then use WM5 ROM 1.13 (O2 Exec) and then upgrade to WM 5 Rom 1.30 (O2 Exec), or just straight use WM 5 ROM 1.30 (O2)?
Is the SIM locked?
Could someone tell me step by step?
Thx, a lot guys.
Now I'm :
O2 Exec G4 64Mb
WM 6.1 ROM 8.2 Tomal
Radio ROM 1.15
Click to expand...
Click to collapse
As fas as I know, is exaclty the same process, just reflash as normal with the ROM desired
Good luck,

Thx a lot
Thx, a lot svobi and orb3000
Hope it will return my O2 Splash logo which is missing because I use task 28 55a.
Now I must download WM5 ROM 1.30 which is +- 60MB

?
Is there Internet Sharing in WM 5.0?
Is WM 5.0 ver 1.30 is the latest WM 5.0 for O2?
Is my PIM backup WM 6.1 compatible with WM 5 ROM 1.30?
Thx a lot, guys.

antonny said:
Is there Internet Sharing in WM 5.0?
Is WM 5.0 ver 1.30 is the latest WM 5.0 for O2?
Is my PIM backup WM 6.1 compatible with WM 5 ROM 1.30?
Thx a lot, guys.
Click to expand...
Click to collapse
no
yes
no

How to backup contact&appoinment from WM 6.1 to WM 5
Thx, Tin2404.
So is there a program to backup my contact & appoinment from WM 6.1 to WM 5?
Thx.

Internet Sharing program for WM 5.0
How to make internet sharing for WM 5?
Is there a program cab file internet sharing for WM 5?
Thx.

antonny said:
Thx, Tin2404.
So is there a program to backup my contact & appoinment from WM 6.1 to WM 5?
Thx.
Click to expand...
Click to collapse
Microsoft ActiveSync + Outlook - synchronize with PC.
Synch. with WM6.1 (contact, mails, appoinment, calender, notes make copys to PC) after downgrade to WM5 synch. again (all this copy back from PC to Uni with WM5).
Its works. I flash more roms and ever become all from outlook back to Uni. It does not matter WM5,WM6 or WM6.1 for outlook.

Extended Rom
Hi, guys, finally I have successfully downgrade from WM 6.1 (Tomal 8.2) to WM 5 (ROM 1.30 O2 Exec).
I use RUU tools, and copy Radio ROM, Ext ROM RO, and CE ROM too it.
But something brother my mind:
1. why my Ext ROM version empty. (In Setting, Device Information). Is this normal?
2. And is this normal, in this ROM no O2 tools?
Thx, a lot guys.

Wm5 - O2 1.30. 162
hi, where did u find the original WM5 - O2 1.30. 162 rom files,
i looked online and they were removed from my-xda website
a link would be helpful
thanks

The Final Conclusion
Hi, guys.
After doing some flash from WM5 to WM6 and WM 6 to WM 5, etc,
I finally succeed again to flash my O2 Exec to its original ROM WM 5 (O2 ROM 1.30) and fully functional...
Mine Is :
O2 XDA Executive (HTC Universal)
G4 (bootloader 2.01)
64 MB RAM
Here's my conclusion:
I'll make it step by step : (Please Do It with Ur Own risk, it success to me, maybe not to the others...)
1. Run PPCPIMBacup.exe (ver2.5) to bacup Ur contact, appoinment, and tasks), save it to Ur SD Card.
2. Download RUU tools from forum.xda-developers.com. Search for it.
After that, extract it to a new folder, let's say "RUU_WM5"
3. Download O2 ROM 1.30 (.exe) from buzzdev.net. Search it under download section. U must register first to download. (It's free )
4. Run O2 ROM (.exe), but don't click next. (cause we're only want to take 3 files : nk.nbf, radio.nbf, and ms_.nbf only from temporary directory in "/Document and Settings/").
Open Windows Explorer, run search to find that 3 files. U just need search one of these files, if U found, than the others files are in the same directory that U found the one. After U found them, copy 3 files to "RUU_WM5" folder.
5. Download Mtty program, too from buzzdev.net
6. Use Mtty (Mine is ver 1.4x) from buzzdev.net :
- Disable active sync
- Make Ur Universal in bootloader mode
- connect Ur Universal to USB
- run mtty, choose USB
- type : task 28 55a
- enter, and than U'll see USB)
- Unplug Ur Universal and do soft reset
(U'll see nothing in the screen, don't
panic.) after that push the combination
button to enter bootloader mode again.
- Plug again Ur Universal to USB
Very Important Note :
a. Use Mtty is very risky, please do it with
very carefully and prepare for the worst
risk... brick the Universal...
Do it with Ur own risk..
Ur bootloader I think must 2.01 or 1.1 (I
think...)
b. task 28 55a is to clear the storage of
Universal to its original state, like U want to
format the new Hard Disk to make clean
Install of new Windows
7. Run Rom Upgrade Utility (.exe) from "RUU_WM5" Folder. And Wait until it finished, about +- 20 minutes, and do hard rest, press 0.
8. Hoopla, The ROM WM 5 is running for the first time, wait until it insatll all the 3rd components from O2... it restart again for one more time, and then finished. U must setting time and other information to suit the present day and Ur will.
9. Run PPCPIMBackup.exe (ver 2.5) to restore all Contacts, Appoinments, and tasks)
10. Done at last Ur Radio, Ce ROM, and Ext ROM doing just fine.
Note: For addition to me, I install psidoc_sdhc.cab (to read SDHC Card), the allblack theme, today agenda, wkTask, TCPMP, and Opera 9.5 VGA for the additional program WM5.
Please that senior of this forum can make input or add to these step or method...
Good Luck, Guys.. and have a wonderful end year vacation..
PS: Sorry for the bad English...

i have error
sorry, I have a little problem.
I use task 28 55aa but failed to format partition.
USB> Task 28 55aa
Wait..
flFormatPhysicalDrive:status=115
DOC_format failed!
Click to expand...
Click to collapse
I'm lucky, when Upgrade or Downgrade main ROM(nk.nbf) or Radio (radio.nbf) , I don't have a problem.
But the problem where flashing extended ROM. Extended ROM can't Flash. Must be Error to flash extended ROM. I have many type ROM, and no one extROM can't be flash.
What should I do to re-format partition
anyone help?
I using XDA Exec (G3) with bootloader 1.01

hi all
i have the same problem like yours,tsk 28 dont work,and my phone is stuck in bot screen...please if you no what to do,post here..tanks

antonny said:
Hi. guys.
How Can I downgrade my O2 Exec from ROM 8.2 Tomal to its original ROM WM5 (O2 Exec)
Click to expand...
Click to collapse
Hello,
can i know why you want to downgrade? I still have original ROM but i want to upgrade. Any problem?

upgrade Fujitsu loox N500 to wm6

sorry i am a bit of a beginner with all this but very confused. I want to upgrade my wm5 loox n500 with windows mobile 6 so i can run certain apps. I have read all the forums and i have downloaded the rom upgrades which say they will change my pda to wm6 - file appears to be os_122u.nbf. however after doing this which all appeared to go successfully my apps will still not run and it appears when i check that i am still on wm5
what am i doing wrong ? have i downloaded the wrong image / duff image ?
is there a dummy guide to upgrading the n500 anywhere ? is it the same for upgarde purposes as a n520 ?
any help appreciated
Craig

just by way of update after supposedly upgrading to wm6 it now says i am on version 5.1.464,
rom revision p224452-p919-v122
rom date 2006-09-20
bootloader revision 1.05
if this means anything to anybody ?

" 5.1.464"
== windows CE 5 which every windows mobile since wm5 have been build
on
where windows mobile 7 should use windows CE6

thanks Rude, just not sure how that helps me - or am i missing something ?

it gave you a version number to search if thats a 6.x version
another thing you can see is if you got threaded sms's it's one of the
few differences between wm6 wm5 apart from the glossy top panels