Help!! I've just tried to update my ROM on my MDA3 and its gone wrong
I've tried a few rom updates and they said incompatible and quit, but i tried the xda-developers.com xda2-jojo.v3.2zS and i proceeded to update then said wrong version for rom and has left me with a dark screen that has dark print saying USB at the to and V2.05 at the bottom and i have no connection to pc so cannot install anything else (like original rom)
it's ok emergency over
downloaded the original rom from wiki.xda and its currently installing.
Now where do i get the lastest rom update from for my mda3 in eng?
Lydon said:
Help!! I've just tried to update my ROM on my MDA3 and its gone wrong
I've tried a few rom updates and they said incompatible and quit, but i tried the xda-developers.com xda2-jojo.v3.2zS and i proceeded to update then said wrong version for rom and has left me with a dark screen that has dark print saying USB at the to and V2.05 at the bottom and i have no connection to pc so cannot install anything else (like original rom)
Click to expand...
Click to collapse
xda2-jojo.v3.2zS for mdall(xdall or Himalaya) only my friend.
search here for mdalll upgrade:
http://forum.xda-developers.com/viewforum.php?f=24
Related
Hi Guys
I have read all the threads and support messages re: Error [246] Device not responding. And mine is different.
I first experienced this problem after I flashed Pays 1.45 Lite after previously installing Pays 1.45 Full. When i try to flash any ROM (not just Pays) I get an "Error [246] Device not responding" message.
Unlike other Error [246] Device not responding problems my bootloader tricolor screen does not come up on my Hermes. I have tried, reinstalling Active Synce, Hard and Soft Resetting, Restarting the bootloader SSPL and still no resolution of the problem.
Sorry bring this problem to bear but it is different to your typical "Error [246] Device not responding " problem and it is driving me batty. the ROM i currently have installed works (Pays 1.45 Lite) and my USB syncs with active sync fine.
Any ideas what the problems could be? I am tempted to drown the hermes in holy water atm to make sure it isn't demonic possession ;(
Any help would be appreciated ;p
Quick update:
I used Force using Safe SSPL for installing ROMS in the past with no problems. It is using this method that I get the 246 Error.
Other methods used gain different errors:
SPL1.04/1.10 - SPL1.09 Bootloader = Error 260 Update Error (check phone attached to usb cable and computer - which it is)
SPL1.11/1.13/1.20/1.35/1.40 Bootloader = 1% complete progress the error 270 Update Error (file image is corrupted) NO MATTER WHAT ROM I USE.
SPL2.02/2.10/2.30 New Bootloader = error 270 as above
Bootloader Screen Reads:
HERM100
IPL-1.01
HERM100
SPL-2.03
I have successfully flashed about 4-5 roms before without experiencing this problem. I have made no changes to my device or my PC. I don't know what could have caused this to happen all of a sudden and out of the blue.
Could a moderator please move this to Hermes Upgrading etc section please?
Have you tried installing the latest Olipro Hardspl v7.... it will read as v2.10 which is a later release than the v2.03 that you have... it will also fix any bad blocks on your device and you should be fine after that...
Debonairone
You. sir.... ROCK!
Works great. Tragedy averted. Thoughts about buying an iphone extingusihed.
;p
Hi gurus,
Im having the similar problem encountered the Error [246] Device not responding.
I have try installing the latest Olipro Hardspl v7 but unable to work. I am still encountered the same problem.
Im currently on Dopod 838 Pro (Hermes 100) with PAYS ROM, Rome Date : 08/09/07, Radio Version : 1.47.00.20, Protocol Version 32:80.7020.20H
Any advises and ideas ?
debonairone said:
Have you tried installing the latest Olipro Hardspl v7.... it will read as v2.10 which is a later release than the v2.03 that you have... it will also fix any bad blocks on your device and you should be fine after that...
Click to expand...
Click to collapse
can i use this olipro v7 for the herald/wing? i am unable to flash anything. i am hard spld and i have a working rom, i just dont like it. thanks
NO!!!! Using the Hard SPL for ANY Version of HTC device it wasn't intended is the fastest way to brick your phone...
ultramag69 said:
NO!!!! Using the Hard SPL for ANY Version of HTC device it wasn't intended is the fastest way to brick your phone...
Click to expand...
Click to collapse
cool, i didn't use it. but i can't flash anything. this stinks. i'm stuck with a rom i dont want.
Hey everyone,
So two night ago I received a notification on my GS3 saying a new update was out.
When I tried installing the update it rebooted into recovery and failed at 24%....weird. I was running Rogers stock rom and recovery at the time so this shouldn't have happened, and I would like to know why for future reference.
I also tried updating via samsung kies. But when I tried this, it said my device wasn't compatible to update via kies????
So I ended up download the LK4 update off sammobile website and installed it using odin.
Anyways, I now have the new update installed. I've noticed two weird things:
1. When I go to about phone in settings and go into software update, it shows a screen "checking for software updates..." and doesn't go away unless I press back or home button. Why can't I search for new updates????
2. My google now voice isn't working. It recognizes what I say to it but when it gives the flashcard response, it doesn't talk back like it normally does. I have it set to English US, and yes my media volume is up at full volume.
Anyways I'm a little frustrated at this point. I can't figure out how to fix these problems so any help would be greatly appreciated. Thanks
Hi,
My phone keeps rebooting, so I thought I install the 4.08.605.19 Rom. I am currently on PagePlus. Therefore, using Clockworld Recovery, I tried to install the Rom on my rooted(and S-Off) phone. I followed the guide that is on this site and was able to install the rom without any issues.
However, when I got to the activation screen, I couldn't click anything. I couldn't click the "Android logo" or the "Change Language" or the "Emergency Dial" button. I even tried clicking on the 4 corners, but that didn't work either. I tried rebooting many times, but the same issue occurred all the time. Does anybody know what I can do? Does this have anything to do with my HBoot version being 0.92?
P.S: I even restored the phone back to my original version and tried "Touch Of Blue V3.0", but that had some permission issues and the installation was aborted.
Thanks,
Ashish
Does anybody have any ideas? Could it have anything to do with clockworkMod not installed correctly?
Also, another thing I noticed is that after I installed the rom, there were no countries in the dropdown list that comes up on the activation screen.
Do you think the rom didn't install completely? Or does this have anything to do with the "boot" part of the rom?
Thanks,
Ashish
Dear friends
I would like you to help me out with the strange problem which encountered me this week. Here's the background: I bought Lg f180k (Korean version of Lg Optimus G) with a stock rom i.e Jelly bean 4.1.2. When i checked for updates OTA in phone settings i received a notification of firmware update. I clicked on update and the process started. Everything was normal till it rebooted as it came with a popup message saying "Device has been suspected to be rooted" and the update failed. Than i connected to the pc suite and put the phone in DL mode and start the process again on the pc. This time everything went normal and the phone updated successfully and rebooted. Here comes the main issue, When the phone rebooted after the successfully update the touch was not working at all. I touched every single area on the phone screen but nothing works. And i could see the interface of Kitkat firmware that means it was updated successfully. Please help me to find out the problem. My phones touch screen stop working when update to Kitkat. I restored to stock jelly bean and the phone is working flawlessly. I am really confused and i have searched everywhere but couldn't find this issue on the forum.
TIP: Phone is working perfectly on 4.1.2 stock rom.
When update to Kitkat 4.4, Touch screen stop working at all but the power button still works.
Thanking you in advance.
Seems like the update failed, I suggest flashing the latest KDZ using LG Flash Tool 2014. Try searching the forum for links to get KDZ and Flash Tool. Don't worry, you're lucky it didnt bootloop or get bricked.
ClarkOwen said:
Seems like the update failed, I suggest flashing the latest KDZ using LG Flash Tool 2014. Try searching the forum for links to get KDZ and Flash Tool. Don't worry, you're lucky it didnt bootloop or get bricked.
Click to expand...
Click to collapse
Thanks mate.... I tried the solution you told me but still the same. I used the latest KDZ file that is: f180k30c_00.kdz and Latest Lg flash tool 2014. Everything goes perfect with the upgradation process till reboot, No TOUCH on kitkat
I tried the sling custom rom (Sling_TJF_G_F180_v1.2.3_blueberry_29042014) and it works perfectly.
Please anyone help me to update it to Kitkat ....
[email protected]@li said:
Thanks mate.... I tried the solution you told me but still the same. I used the latest KDZ file that is: f180k30c_00.kdz and Latest Lg flash tool 2014. Everything goes perfect with the upgradation process till reboot, No TOUCH on kitkat
I tried the sling custom rom (Sling_TJF_G_F180_v1.2.3_blueberry_29042014) and it works perfectly.
Please anyone help me to update it to Kitkat ....
Click to expand...
Click to collapse
Have you solved the problem?
I suggest going into lower version of the firmware.
Try F180K 30b ?
Check on back to me, I want to know the out come as I am kinda doing it for my friend aswell
Hey
I tried every file of kitkat but nothing worked. Even i tried the custom sling rom for kitkat but encountered same problem. Everything goes perfect with the upgradation process but after reboot touch stop working at all. It seems like my phone typically doesn't support kitkat rom :-/ its strange. If you find any useful information kindly share with me. Currently i am using sling custom rom for jelly bean and its working flawlessly. Thanks
[email protected]@li said:
Hey
I tried every file of kitkat but nothing worked. Even i tried the custom sling rom for kitkat but encountered same problem. Everything goes perfect with the upgradation process but after reboot touch stop working at all. It seems like my phone typically doesn't support kitkat rom :-/ its strange. If you find any useful information kindly share with me. Currently i am using sling custom rom for jelly bean and its working flawlessly. Thanks
Click to expand...
Click to collapse
I have this problem too. Please sorry my bad English.
Hi. I had been using my galaxy note 2 just fine untill recently when I tried to flash gapps. It was incompatible. Anyway, I freaked out because everytime i tried to get y phone it was st showing a black screen saying setup wizard is incompatible. I formatted my phones data. Now, I still can get into TWRP, and still can put ROMS on my phone, buut everytime I flash the i get the same seutp wizard error.
By the way, I was sing the Cyanide OS with shift Kernel, and thats where the setup wizard doesn't work. I've also tried Ressurection Reimx, but got a bootloop
Is the phone's model # sgh-i317 from AT&T? You have confirmed that the Gapps being flashed are for the version of Andoid on the phone? Tried different versions of Gapps?
oinkao said:
Hi. I had been using my galaxy note 2 just fine untill recently when I tried to flash gapps. It was incompatible. Anyway, I freaked out because everytime i tried to get y phone it was st showing a black screen saying setup wizard is incompatible. I formatted my phones data. Now, I still can get into TWRP, and still can put ROMS on my phone, buut everytime I flash the i get the same seutp wizard error.
By the way, I was sing the Cyanide OS with shift Kernel, and thats where the setup wizard doesn't work. I've also tried Ressurection Reimx, but got a bootloop
Click to expand...
Click to collapse
What TWRP are you on. When u used cyanide mm something hastened
Happened to where I had to Odin to stock and start all over