Start/Help no longer works - MDA III, XDA III, PDA2k, 9090 General

Strange things today... Three seemingly random hard resets and restores from Sprite (lucky for me) but now Start/Help does not work anymore. I see it is a lnk to pegehelp with a command I don't fully understand: pehhelp.exe?ceshell.dll,-8212
Sure would appreciate getting Help to work again and some idea what caused it to stop.

I would recommend you hard reset, and try help before restoring with Sprite. If it works, then you know the problem lies in the restore and not your device.

Clarification
I will try that. I also realized I should say what happens when I attempt to access help. Unit beeps to tell me it recognized/accpeted my input in the menu, then does absolutely nothing.

Seems to by SPB - Issue solved
After switching the SPB today screen plug in off and on and soft reseting help works again. No need to uninstall just off/on. It's too bad that so many of us can prove or suspect many problems related to SPB software. I don't want to go with out it.

Related

i can't turn my XDAIIs on

after my XDAIIs Freezed, i did soft-reset. i try to turn it on, But nothing happen. So i put a battery out and did hard reset and put it in. then turn it on, nothing happen. i spend a few hour waiting and try to turn it on sometimes can sometimes cannot. How can i do?
Thank you in advance for your answer
what did you do made your XDAIIs Freezed?
any software upgrade?or just happened suddenly?
re:
It's freeze while i'm backing up.
Update: Maybe it's cause by i restore all program from my old Pocketpc Backup, and they have a bad conflication between program and hardware. Now i send my ppc to service for frashing rom and i will try to install it manually one by one.and less program i will use. So, After finished i'll tell you all the result.
Thank you for all you guys reading my topic.
Hard Reset
You dont need to remove the battery to do a hard reset. Just press and hold the power button on the top, and then use the stylus to press the 'soft reset' button on the bottem. That will hard reset the device. It should then power up and re-install its software.
Restoring a backup from an old device aint a good idea (same model, and operator required for sensible results). The backup will contain the windows dir, registry, as well as the operator unique progs that they put on the device to personalize it to them. Result will likely be not being able to boot, or device working incorrectly once started.
If the hard reset does not work, then you'll have to return it for a replacement.
Best bet will be to re-install all the progs from your own device and resync your email, contacts, blah from a PC.
Nigel
I have the same problem after I upgraded my MDA II to WM2003SE and did a restore from backup.
If the device is in the cradle I can turn it on an also if I receive a phonecall it switches on. A soft reset works also. But if I just press the button nothing happens .........
Will do a hard reset and restore everything manually, see if that helps.....
Update: My board was broke. Services will change it for free but i take a little long times. Because spare parts wasn't avaible.
Have to wait few week.

Please Help, Problems with Phonebutton

Hi everbody,
first sorry for my english. i am german.
So now, this moring my MDA 3 has made an hardreset and since there, when pushing the phonekeys, contacts and calandar are opening!
So what could i do? I had made an Rom-Update (newest from T-mobil germany) but nothing helps.
Could I change this settings manually in the regestry? Any Ideas?
Thanks for responding.
Schralle
OMG THE SAME THING'S HAPPENING TO ME TOO! It just happened.
I have a Cingular Siemens SX66 (PH20B1) with
ROM v1.33.10 WWE
Radio v1.02.10
ExtROM v1.33.110 WWE
It just suddenly soft-reset, but now the phone answer (green) and phone end (red) buttons don't work and open Contacts and Calendar simultaneously. Furthermore, my navigation keys don't work either! Whenever I push it in any direction, it automatically loads up the Contacts. The other hardware buttons work fine, though.
I tried restoring from a previous backup, and that didn't work. Then I tried doing a hard reset and not restoring a backup, and that STILL didn't work. I then did a restore from a backup after my hard reset and nuthin!!! I'm at a COMPLETE loss....this is startin' to scare me...any ideas? ANYONE?
Thanks!!
--Q
How did you guys go with your probelms.
I have a similar problem with mine after a low battery experience.
My buttons are only working sometimes, especially the multi-directional button.
I have read I should try a new battery, but haven't got one yet.
DLC
Turns out mine had just died. The buttons just didn't work, and it was very likely a hardware problem. I got a replacement in the end.
Good luck!
--Q

Phone kept resetting after soft reset!

Ok has that anyone had this issue with their Orbit?
I had noticed that the keyboard was not giving me any predicted text choices while typing, so I tried to change the input method to no avail. So I decided to perform a sft reset to sort the problem.
Oh was I not happy with the result as for over 5 mins all that was happening with my phone was the screen would light up o2 screen, green screen then enter pin and reset and it would do this again and again.
So even after removing the battery for a few minutes not change once I attempted to start the phone. I even reset the device via the button on the side and it made no difference.
I was just getting ready to bite the bullet and sound off the o2 when I remembered reading on here of something similar happening so I searched and found a posting saying to try and press soft reset just after phone started. And guess what it worked after that so what I want to know is why or what I did to get my phone working again?
Any ideas guys, only thing I can add was the phone was plugged in to my workstation USB so was charging when the initial soft reset was performed while using Valksoft's space reclaimer reset option.
Thanks
JC
Ok an update the phone is now doing this everytime it is turned off. And since the last time it occurred I have been unable to get the phone to work.
Any ideas, I believe it could be a registry issue with the phone as I had recently installed a couple of programs that worked fine for a couple of days then while installing a dictionary several programs were uninstalled in error.
So after installing again this problem has arisen. It is possible that this was not th cause as I hae noticed tat the last scheduled back up was on the 22/01/07 so Monday's was not carried out possibly due to this?
my orbit has also this bug. after a soft reset he is booting up till the pin entry and then a boots again and again. Up to 5 times
Yes, my Orbit sometimes needs to reboot 4 times before it will sucessfully bring up the Home Screen. Anyone got any ideas on why???!!!??
I had enough of it doing this so I have done a hard reset and the problem has gone now just need to set everything back as I want it as backup still had the initial issue once it was retored.
I guess it was to do with the registry but not sure what exactly, maybe redundant reg keys etc?
I've experienced same problem on my dutch t-mobile mda compact III.
Happend after installing different programs, but i can't find the exact cause.
when i remove the microsd (on which i installed the programme's) the device starts en doesn't softreset when phone screen shows.
At first i thought it had to do with programs that tried to connect to gprs before even entering the pincode of the phone. But even without pincode it keeps restarting.
Happend on my 1gb microSD once en also on my 2 gb microSD.
Hope that someone knows what the cause is, so i can prevend it from happening.
Resets caused by the Memory Card Fault
Look at the posts regarding the memory card corruption if you back-up the card format it and then put it back everything is fine for a while. Not puttting a My Documents folder on the storage card usually helps with this issue...
rebooting.
hi,
as you well understand there are only 2 possibilities: software and hardware failure.
Surely, you don't want to think about hardware failure, because in this case the solution is to send it back to seller or to service center. Except for the cases caused by battery and sd card. These are 2 elements you can replace on your own easy.
However, "instability" of the device normally caused by installed software.
The first thing you do, like it or not, if you have a problem, hard reset your device.
BACKUP your DATA before hard reset!
You can try to to remove software piece by piece, but could be time consuming thing and not necessarily lead you to a good result.
Radical approach is to return device to "factory state" - hard reset.
If after hard reset you still have a problem with your device like accidentally rebooting, address to service center or ask seller to to replace the good.
regards,
rebooting.
double post.
I had the issue once... card corrupted. Had a back up so formatted the card, put data back in, issue gone.
This has happened to my orbit a couple of times. But I think if I reset by pressing the reset button on the side of the machine it only resets once. Resetting after installing apps for example from the prompt is bad, do it later by pressing the actual button. This seems to work for me but only time will tell.
my htc p3300 has reset problm
my htc p3300 restarts automatically while im calling or using net it starts autuomatically it goes till green screen where it shows wm 6.1 then restarts again n again i dnt know plz tell me is it software or hardware problm

SMS not working anymore (and it happened already in the past but...)

Hi,
I have a VODAFONE 1605 (a plain Hermes 200, a TyTN). It had the original Italian Vodafone WM5 ROM until last month when I decided upgrading it.
I first tried the CH Vodafone version of WM6 ROM, but I had to remove it quickly because for no apparent reason, it was not working with SMS at all (no SMS out, no SMS in...).
I then decided to use HTC WM6 ITA ROM and to apply manually all the needed configurations to use it with my VODAFONE.
It run perfectly until yesterday, when it stopped sending and receiving SMS.
This is very strange as I did not install any program since one week (at least) and it seems difficult for me to be able to find any reason.
Probably the pim.vol file grew too much it is not anymore able to handle more SMS (provided the infos are inside there) ?
I have no explanations available to me and I was not able to find any kind of hint digging into the forum...
I was only able to find some other people with similar problems in the last few days but on different platforms...
Is this maybe a WM6 bug ???
Any hint appreciated.
I'll in the meaningwhile backup all of my infos and proceed to a HR... I'll keep my fingers crossed...
Dear Mix,
I wish I could give you a good answer, but... well, maybe the answer is not really an answer, but it could be at least an hint for other people like you (ME !!!).
You do not want to lose all of your settings, all of your received SMS, you do not want to waste a lot of time setting everything as it was before, so an HR is REALLY the LAST solution for you. You would like to find a tricky path to follow to bypass this unlucky situation...
You already tried to SOFT RESET your device but you did not succeed. The problem is still there...
Well, there seems to be another kind of RESET, before the HARD RESET.
I would define it the "DEEP SOFT RESET", which is something more than a SOFT RESET, but it is right before the HARD RESET.
This kind of reset solved the above problem. I don't know why, I don't know how. It only worked.
The DEEP SOFT RESET is this: press OK and ON button and while pressing those two buttons, put your stilus into the reset hole, pressing the recessed switch. This will place you into the BOOTLOADER MODE.
Keep the device there, showing all the colors and Bootloader information for around 20 seconds at least (obviously, not connected to any cable).
Then, put your stylus again into the hole for resetting and press the internal swith one time more (without pressing any other button).
Your device will reset again, your data will still be into your TyTN and your TyTN will start loading all the data it still has inside.
As soon as I did this, the waiting SMS started reaching their addressee and they moved to "sent" folder.
Again, I'M SURE THIS DID NOT WORK WITH A NORMAL SOFT RESET (I ALREADY DID THIS 20 TIMES !!!). And again, I don't know wither HOW and WHY.
It only worked.
Good luck.
UPDATE:
I've noticed that the problem aroused again and I did a DEEP investigation, with a complete reset of my Hermes...
I then placed all the same programs inside and again no problem...
Problem came back once I used a program called Hermes Tweaker v2.1b which tweaks some parameters around in the WM device...
Once I reset the parameters to default again, the problem went away.
I'll have to discover which parameter is creating the problem...
I'll post the results here (beside fit4cat's pm...)
Good luck.

Phone freezing... need advice...

Hello, I tried searching but to no avail.
I have an intermittent problem that is getting the best of me with my TP2. The phone application seems to freeze randomly. It seems to usually occur at the end of a call when I go to hang up. I click end, the call ends and the phone just freezes. The call is disconnected, but the end screen is just displayed and my only recourse is to soft-reset.
There is really not a lot of third part stuff on it, in fact, I did a hard reset not 5 days ago.
Can anyone offer any help on the matter...
As always, many many thanks...
Same problem
I also have the same problem. I recently upgraded to WM6.5, but the problem still exist.
Somtimes the light on the bottom remain on as the phone freezes
I'm also having this problem, infact it keeps freezing on the home screen for me..
If I was not so green, I'd consider trying to get more stable by flashing a different ROM but I have no clue how to even begin to find one, select one, and do the operation.
You might try doing a hard reset. That's cured similar problems for me. I wouldn't suggest doing a backup, because you might backup and restore whatever is causing the problem.
Did a hard reset and no backup loaded only 4 days ago.
Any better solution for this problem??

Categories

Resources