http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm
Since I didn't see in any thread about someone updating their PDA2k to the latest widcomm drivers... Just an FYI, I copied the files from the other thread onto my PDA2k. Seems to be working. Will test further to see if I'm still getting memory issues like before.
NOTE - I used Resco to copy the files over. There were several warnings that I was updating a file in ROM.. but I went ahead and did that anyway...figured I could hard reset the device if need be.
Still testing..but handsfree is a bit sporadic in terms of connecting.. still issues with the headset profile. Doesn't always connect. Turning on and off bluetooth seems to work better.. have not seen any driver memory issues(and that is turning on and off unit along wiht turning on and off wlan/bluetooth).
Quite a few times, I had to press the button on my HB-35 to connect the voice portion after it dialed. The PDA2k reports that it is connected to the HB-35, but doesn't seem to transfer the voice call over. After pressing the button on the HB-35, the voice transferred over... Will continute to play around with it...
Any update firbird and guest? What devices are you connecting to the PDA2K?
BT Headset, Model?
GPS, Model?
Car Kit, Model?
Keyboard, Model?
Wife, Model?
I want to control everything, yes, the dog included!
To clarify, I wanted to control the dog AND the wife, I didn't mean the wife was a dog!
Sorry.. been a bit busy lately... anyway.. as for an update.. I had more problems with the headset than with the previous 1.0 driver version... as for driver memory errors.. it seemed that I got them less frequent with the 1.5 driver.. but i still got it once in a while.. There's another thread in the forums here where I mentioned that it might not be entirely the driver but the way good old MS handles its memory allocation for drivers... the PDA2k isn't the only one with these issues.. the XDA IIs, the 6300 series.. even the older ipaqs.. the driver memory thing pops up all over the place where bluetooth is involved...
I had the xda II for 9 months and never saw the driver memory error msg, in fact it was perfect.
do it runs on pda2k ?¿?¿?¿
Thanks
I keep losing the pairing on my bluetooth devices whilst running WM6 after a soft reset.
When go to settings/connections/bluetooth the pairings are still there, yet after a soft reset I get message up "Do you wish to allow this device to connect Y/N"
Any ideas ??
Had the same problem myself (kept dropping connection - ok for 1st call then wouldn't connect) and i went back to wm5. Not had any problems since then.
Yeah thats what i've done lol
All,
I have a T-Mobile Vario2 and have tried several WM6 roms and keep getting an error with the Bluetooth.
I have tried to pair several devices e.g Holux 236 and Sony BT HBH60 headset but the phone keep giving me an error saying Bluetooth Hardware Failure.
Also when I tick the the option to keep bluetooth on and go back and check the option has been deseleted automatically. I cant seem to keep the option ticked.
Why is this happen? I have tried the official TyTn ROM and T-Mob WM6 both giving me the same problem?
I am using the following radio verison = 1.50.00.00
I have never dropped the phone and have HardSPL installed.
msuk said:
All,
I have a T-Mobile Vario2 and have tried several WM6 roms and keep getting an error with the Bluetooth.
I have tried to pair several devices e.g Holux 236 and Sony BT HBH60 headset but the phone keep giving me an error saying Bluetooth Hardware Failure.
Also when I tick the the option to keep bluetooth on and go back and check the option has been deseleted automatically. I cant seem to keep the option ticked.
Why is this happen? I have tried the official TyTn ROM and T-Mob WM6 both giving me the same problem?
I am using the following radio verison = 1.50.00.00
I have never dropped the phone and have HardSPL installed.
Click to expand...
Click to collapse
Is it still under warranty? It sounds like you tried everything, it may be broke. If it's not under warranty, search and see if you if you can find a picture pointing to the bluetooth/wifi chipset and physically check each leg of the chip. Maybe it's a cold solder joint on the chip. good luck.
Chris
I have problems with my Bluetooth and the paired device in the car with almost every recent ROM.
After about 10 minutes driving with a connected phone, the Bluetooth shuts down on my Diamond. When I go to Settings -> ... > Bluetooth -> Mode -> Turn on Bluetooth is unchecked. If I check it again it connects again with the phone and about 10 minutes later it's off again.
I went back to the RUU_Diamond_HTC_WWE_EastEurope_1.93.479.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe. It's against my feelings, believe, etc. but I want to solve it .....
I installed Advanced Configuration Tool (3.0), went to Bluetooth -> Audio gateway power save and Disabled it. I did it because I was reading about suspended devices and power save features. I thought that the loss of Bluetooth is been caused by a saving power feature.
After a soft reset, the Bluetooth stays connected.
It's a start, but I'm not happy with it ... I would like to use cooked ROM's and optimal settings in the ROM.
There are other tweaks too in Bluetooth, for example the supported bitpool, etc. Perhaps those settings cause the shutdown of a connected Bluetooth device instaed of the power save feature.
Has anyone this kind of problems too with paired Bluetooth devices?
If so, would you like to help me to find the cause?
If not, can you describe what device you use (Jabra, TomTom, car radio, etc.), which ROM, which radio and extra tweaks?
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
olliver said:
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
Click to expand...
Click to collapse
I have a CD70 too in a Opel Zafira.
This "comm manager" thing is interesting, but it looks to me like an Opel issue.
Can't you flash firmwares by opel?
Riel said:
Can't you flash firmwares by opel?
Click to expand...
Click to collapse
That's an option, but my Trinity (P3600) performed great with the same car. Will an upgrade solve my problems? I know one thing, it's not cheap either.
I tried it with different ROM's, but it still happens.
I tried it with different radio's, nothing changed.
Till today, I've got now the new radio (v1.05.25.BS14).
http://forum.xda-developers.com/showthread.php?t=432770
It has fixed the delays in GPS + faster GPS fix and more important fo me Bluetooth didn't stop today.
I'm sure 100% sure yet, but seems to be better.
I got something to complain too about the new radio. The radio signal is less strong than the .05 radio.
Same problem here
My Vectra is equipped with CD70.
Previously I've owned a Kaiser and the problem was solved by one of the 6.1 radios, bluetooth connection was rock solid.
Right now I have the same problem with Diamond - after every single phone connection, when I'll hangup, the phone disconnects CD70. When I'll try to reconnect manually using CD70 everything is fine.
I've noticed that the same problem exists when I'm using Nokia bluetooth headset - one call, bluetooth connection dropped...
I've tried following Diamond radios:
.05
.07
.08
.BS14
and two Raphael radios by Bepe:
1.03.25.18
1.02.25.11
Each Diamond radio behaves the same way. Each Raphael radio adds a bonus - random bluetooth connection problems.
Right now I'm back with .05, I think I'll look for the software I've seen once (can't recall the name) - it's a PDA application designed for connecting to the car bluetooth systems and it has been cerftified to work fine with CD70.
Use Jetware Mobile for htc-diamond.
jetware
That's the software I couldn't remember the name.
Anyway I gave it a shot and it gets even worse, I couldnt get the connection lasting longer then 2-3 minutes, totally unstable
Right now I got back to radio .08 - the bluetooth link is rock solid, I guess I'll just need to get used to reconnecting after each phone call
Same bluetooth system in my car, same problems as you guys.
To avoid the disconnections after calls you need to go, with 'Advanced Config' to bluetooth->Audio gateway power save, and switch it to disabled.
For me this little change solve the 'first' problem, but I have another one that I don't know how to solve: the aparently random bluetooth disconections. Sometimes BT is not disconnected in hours, sometimes in days.
I am also using Jetware Mobile, but i didn't feel any improve...
The random ones depend on the radio rom version - I was using .05 and it was rock solid.
I will try .16 with audio gateway started and with power save disabled as you advised - I thought about it earler but previously I tried to disable the power save without enabling audiogateway service
Well, we will see if it works or not.
Hi,
I also have a Vectra CD/70 combination, for 2 yrs now.
I had a HTC3300 and 2years i had not a single problem with Bluetooth connection.
Now i have a HTC Diamond Touch Pro and have the same problems you guys have.
I tried all your suggestions, radio's and so on with no good result.
The good news is .. its an Opel problem and it seems to be that a Bluetooth Firmware Upgrade is available from Opel Germany. I just contacted my dealer and next week he will Upgrade my bluetooth firmware.
I will keep you guys informed.
Hello,
had the same problem with my Opel CD70.
Using Jetware Mobile and limited the entrys who copied to the car to a max. of 5. Also disable the call lists. Now it works.
I think the Opel/Vauxhall Bluetooth Connection disabels if to many entries are copied to the car.
Hello,
any News about our Bluetooth Problem ???
I also have a CD70 from Opel and I cannot understand why my Diamond swich of Bluetooth after a while ?
Is it an Opel-Problem or does anybody now an Application which helps ?
Thanks a lot for Your help,
Stepos
Hi,
I am currently using BTrestore (http://home.casema.nl/rgschmidt/WM/Downloads/BTRestore_V_1_0_0_PPC.ARMV4.CAB). This utility checks the status of the bluetooth stack every 5 secs and (re)enables it everytime it's down. It seems that the 5 secs are short enough to keep the phone connected. It's not a real solution and unfortunately this tool is sometimes instable too, but it absolutely extends the connection time with the UHP.
Maybe bullock can tell us if the carkit upgrade solves anything...??
I also created a ticket at HTC, but they refuse to troubleshoot user specific issues. They told me they only look into issues if they get enough calls from different users and to keep an eye on the update site (they seem to be able to solve issues without knowing what the actual issue is...). So I would encourage everyone here to create a HTC ticket for this issue. I still think it is an HTC issue: a bluetooth stack should never go down without any user intervention.
Good luck!
BTrestart and Jetware Mobile doesn`t help, my Touch diamond disconnect again from Opel CD70 and swiched off Bluetooth !
Can anybody help ?
Sorry guys, the OpelDealer is still "searching" for the Bluetooth upgrade.
After several phonecalls maybe next week (1st week of Febr) it will be made available to the dealer.
Like i said ... i willl keep you informed ... still have this lousy problem !!
..does anybody use the new Rom 2.03 ? Any difference ?
I also asked my Opel-Dealer for an Update of UHP, next week I 'll get new Information....
... well guys I had my CD70 updated !! I am/was very sceptical because the only thing they did was a re-install of the Language of the Navi System with a version 2005 CD. I asked if that was all to correct my Bluetooth problem .... the (smiling) answer was YES.
I have it now for 24hrs ...... and Bluetooth is still on )
I will let you know the result after a week !!
..i can't beleave it works with a 2005-update ! Great !
My Opel-Dealer is still busy in selling 10 Opel Corsa every day (..the magic word is "Abwrackprämie") , so I'll have a date there next week...
When I bought my Vectra the dealer had also to reinstall the Language-CD, maybey it was the wrong version....
...... Sorry guys ......
This update DOES not do the magic trick !! So we have to find another solution
who has the right idea ??
When I try and turn on bluetooth, so I can pair my ear piece, I get this message, "cannot start the bluetooth stack." Ive been all over this forum with no luck.
This isnt a TomTom, or a PTT issue. I have never installed TomTom nor have any other issues. I did install Garmin Mobile XT which works geat. Not sure if that did anything.
The problem is I just aquired the phone, did a hard re-set, and loaded all of my software and just now tried to start the BT. Should have done that in the beginning.
Any help will be much appreciated.
Solved: "Cannot start the bluetooth stack." WM6.5
Nylo said:
When I try and turn on bluetooth, so I can pair my ear piece, I get this message, "cannot start the bluetooth stack." Ive been all over this forum with no luck.
This isnt a TomTom, or a PTT issue. I have never installed TomTom nor have any other issues. I did install Garmin Mobile XT which works geat. Not sure if that did anything.
The problem is I just aquired the phone, did a hard re-set, and loaded all of my software and just now tried to start the BT. Should have done that in the beginning.
Any help will be much appreciated.
Click to expand...
Click to collapse
I found out that a shortcut, BTTrayCE.ink that was supposed to be in windows/startup and Windows/startup:disable folders were not there. I simply sent the two shortcuts from BTTrayCE.exe (in Windows/) into the above stated folders. Now I have Bluetooth!