Hi
My PDA is Language Germany.
What can I change English or Turkish
Thank you very mush
abi aynen nerden bulucaz bunun rom unu bi yardim pleess
Hewlett Packard RX1700 PDA Batteries
Gentlemens, no need to argue!
Seriously, I do not know about the Rom...but I do know about the batteries, which sadly I have had to purchase a couple of times now (..._)
NoOnetheless, for subbing 365748-001, 365748-005, and 367194-001 batteries, I like this place: www.batterytex.com
They have good PDA batteries, especially for the Hewlett Packard Ipaq RZ1700, 1710, 1715, and 1715 series.
I went for the PDA-90LI battery. Does the trick every time &tc.
-The Works
Related
Hi!
I was using XDA 1 previously, oh well it's indeed a cool device. In fact it was my second pda-phone device after my palm tungsten w.
I just got myself a new cool gadget, hp iPAQ H6300/H6365(asia), the flip was it outbeats the XDA2 with its integrated Wi-Fi, but the flop the speed is no where faster than XDA1.
All in all it's pretty neat machine apart of its squared design :lol:
I wish to upgrade the rom to Wm2k3 SE, how and/where could I possibly start off... :wink:
Any advice are most welcome.
I wonder, let say for example, the rom designed for XDA 2 and then install on iPAQ, would there be causing anything different or anything bad like crash/incompatibility :?: :?
Sure..You can't install a ROM to your device designed to another PDA..
All ROM are containing different drivers,programs supporting the different hardware,like processor,screen,etc..
So there is no way.
Argh... that was too bad for me
btw, if you know any of rom kitchen for ipaq? sorry if this should not be asked in this forum. Couldn't really get of much pointers around.
I bought three pocket pc's : hp ipaq rz1710, hp ipaq rx3715, and compaq ipaq h3800. They are all of France so i can't understand this language . I find this site and i fall to think whats will happen if i'll write xda roms to my ppc :> I can't find roms for mine pocket pc's. Please answer my question and sorry with my bad english language.
You will kill all your ipaqs if you write the xda roms to them.
You better dont do that.. just give all your pocket PC's to me if you're planing to kill your ppc. lolx :lol: :lol: :lol:
guminis said:
I bought three pocket pc's : hp ipaq rz1710, hp ipaq rx3715, and compaq ipaq h3800. They are all of France so i can't understand this language . I find this site and i fall to think whats will happen if i'll write xda roms to my ppc :> I can't find roms for mine pocket pc's. Please answer my question and sorry with my bad english language.
Click to expand...
Click to collapse
I need windows 2003 se or 2005 for my compaq ipaq h3800. please answer me vhere do i find it
For rx3715, rom is here:
http://h20000.www2.hp.com/bizsuppor...esId=457080&swLang=8&taskId=135&swEnvOID=2050
for rz1710 here:
http://h20000.www2.hp.com/bizsuppor...kId=135&prodSeriesId=420454&prodTypeId=215348
Hi,
I would need assistance - which ROM for WM6 to use for HP Ipaq 2200?
I am novice for this. Can anyone help me with this one finding the ROM for this built?
Where should I search for?
Thanks!
Can anyone suggest me where to search for WM6 for my PDA?
me 2 thnaks!!
If your refering to the OLD iPAQ 2210 series, I don't think WM6 fits in a 32MB ROM, which is what those pda's had. I used to have one of those and that is one of the reasons I upgraded. I wonder how much can you take out of WM6 to be able to reduce it's size by half...
This so far has worked on a my 2755 and another 2495. Not sure about earlier versions.
Link is in first post
http://4pda.ru/forum/index.php?showtopic=52176
dpdurst said:
This so far has worked on a my 2755 and another 2495. Not sure about earlier versions.
Link is in first post
http://4pda.ru/forum/index.php?showtopic=52176
Click to expand...
Click to collapse
DO NOT FLASH THIS TO YOUR 2200 series. It IS NOT the correct firmware.
Further checking shows this is not for the 2200 series
HP iPAQ hx2110/hx2115/hx2190/hx2190b/hx2195/hx2195b/hx2410/hx2415/hx2490
hx2490b/hx2495/hx2495b/hx2750/hx2755/hx2790/hx2790b/hx2795/hx2795b
It will be nice to have iPAQ H2210 upgraded to WM6.
My H2210 has PPC 2003 ROM only not even 2003SE. It will be nice to have it upgraded to 2003SE if WM6 is not available. Can someone help?
so yes, or no?
NO! iPAQ H2200 series cannot be upgraded because it is too much of efforts and too little reward to build a WM5/6 ROM for this most easily broken (mostly grips and battery doors) amongst the iPAQs.
In my humble opinion: NO. The Windows Mobile 6 Operating System does not fit into a 32MB ROM. I remember back when 2003SE came out, we couldn't even upgrade to that because of the ROM size constraint. That said, I do still like the PDA a lot, specially the large bright screen and ergonomics.
yes, 2200 series have got a little ROM, but support CF cards! I have heard, that system can boot from a card, so if somebody can change it to boot from card, it will be great, and users of 2200 series can be happy with new WM!
Help me too ... hate the wm 2003
i bought an hp ipaq h2200 frm a friend, and thought ,and now i d like to flash a wm 5 or 6.x rom to it. I read through the above posts to understand i probably cannot. But if i can boot a different os from the mem cards, can i please know more about it?
please help ...
wm 2003 is stifling me
Hi to everyboby, does someone know where i can buy an i120 battery?
I have searched the web but without finding anything!
I am from italy, but here the Gsmart is sold, its batteries not!!
Thank you!
checkout Ebay. there's alot of batteries there for Gsmart, only thing is they are knock-offs.
Battery gSmart i120
check out this link...
I have Qtek 9000, the world's first 3G Windows Mobile device!
520 MHz processor, WiFi and a full keyboard...etc.
I want to know if it's possible to install a newer OS (WM 6.1 or better) and how?
Thank you
P.S. currently it has the German WM5 because i bought it from Switzerland a 4 years ago.
Searching before creating a new thread is always nice, have a look on my signature link, you´ll find all the possibilities to upgrade your great Uni
On that line I´m closing this thread