Develop Bugs

PDA2 ROM straight from I-mate!

They work without being signed in to i-mate!
WWE http://www.clubimate.com/support/PDA2/ROM/PDA2_WWE_11100_144_10300_ship.exe
Arabic
http://www.clubimate.com/support/PDA2/ROM/PDA2_Arabic_11100_153_10300_ship.exe
Italian
http://www.clubimate.com/support/PDA2/ROM/PDA2_ITA_11104_152_10300_ship.exe
The ROM's are dated 1/27/05 but the ****ers did not release the phone until a week or two ago.. What was the hold up? ****ers!
My PDA2 has the same rom as they give on their web site.
ROM version: 1.11.00 WWE
ROM date: 01/27/05
Radio version: 1.03.00
Protocol version 1337.42
ExtROM version: 1.11.144 WWE

OMG! if what you say means what i think it does ( ie .. i can upgrade my xda2i without country id error) then my friend... YOU RULE!
if not then .. sadly.. were back to square 1

double omg !!! it gives country id error...
next step .. how do i get past that little hurdle??

FOUND THE SOLUTION
hey good news.. atleast for me.. i found the way to get past the country id error.... HEHEHEHEHEHE
at the end of this post (http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Errors)
is the file maupgradeut_noid.exe ...run it twice.. first time it gives error then second time it works perfectly....
i wanna kiss the guy who made this utility... YOU RULE!!!

So what's in this release?
I assume it ain't 2005!
Ant

Hi. Will these work on an O2 XDA IIi (English) ?
I need to upgrade mine to see if I can make the bluetooth work better, its very crackly with the default rom (from the o2 website I am using)
Merlin

I can't download past 32.5MB...tried twice now.
Anyone else had similar problems?
Ant

What rom is this? WM5? Dont think so. So why would they release an older rom ???

hi
this is just 2003SE rom .. but an updated one.. i find it more stable and gsm signals are stronger ....
havent tried bluetooth yet but the it seems to have the same version as xda2i rom .. however the quality of BT is often related to the radio rom aswell which in this pda2 rom is of higher build..
go ahead try the rom and share your experiences here

Installed it on my O2 XDA IIi. All went well and it looks like its fine.
Will post any observations later...
M

yeah its been a whole day that ive ran the new rom.. i havent had a single hang on the device...
though there is one thing that bothers me... this rom and ext rom doesnt have a antivirus that the retail pda2 had when i saw it in the shop...
could it be that our pd2 rom donwloaded from the clubimate site is different than the one on retail models...
may be crazzy can tell us whether his retail pda2 has that antivirus app or not.. if so is it in the ce rom or ext rom (his extended rom posted on xda ftp doesnt have it)

will this work on a sx66?

hakushox, the SX66 is a BLUE ANGEL, not an Alpine.

Re: FOUND THE SOLUTION
zohaer21 said:
hey good news.. atleast for me.. i found the way to get past the country id error.... HEHEHEHEHEHE
at the end of this post (http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Errors)
is the file maupgradeut_noid.exe ...run it twice.. first time it gives error then second time it works perfectly....
i wanna kiss the guy who made this utility... YOU RULE!!!
Click to expand...
Click to collapse
It still gives me Update utility error...cam u help

I'll try it today and see how it goes.
Has anyone tried this and then successfully gone back to the o2 rom?
<<starting the backup and checking I've got all the bases covered>>
Ant

Installed, working fine so far.
Looks to have improved the Auto camera setting as well, it actually adjusts now and doesn't look dark in all conditions!
Ant

hi
yeah the first time the utility gets you into bootloader mode and gives the error ... the second time (without disconnecting the device) running the utility is succesful...
what you have to do before that is... run the pda2 rom intact then look for the *.nbf files in the temp folder.. copy everything in that folder to another folder of your liking.. copy the mdaupgrade_no id utility to that same folder and run twice from there

All still working fine, except for a slight issue with viewing pictures.
I click on a jpg image, "Album" appears at the top of the screen as though it's just taking a short while to run, then soft resets.
Anyone else?
Ant

no that album thingie is fine with me.. still no prob..

Well ive tried to download this a few times now and i cannot seem to complete the download
Im interested to see if this update is any good.

Qtek 9000 Shipped ROM now on FTP

MMB was kind enough to post the Qtek 9000 ROM here:
http://s5.yousendit.com/d.aspx?id=12XDPY08OSB2R0PAMI3W42KE3Q
And I will be uploading it to the FTP for everyone else in case the above link expires:
/Uploads/Universal/Shipped ROM/
Even though it has the "latest" ROM date and version number, I seem to be having continuous issues with my Qtek 9000 in the fact that some of my settings refuse to stick:
I have to constantly re-pair my HS850 Bluetooth headset and my GlobalSat BT-338 GPS.
I have to occasionally associate my device to my Wi-Fi router and re-enter my WPA-PSK key.
I have since flashed my device with the JASJAR ROM and the O2 Radio ROM, and customized the JASJAR's Extended ROM to see how much better it performs.

Hi,
Can anyone tell me how I can use this ROM with the NoID installer. Again I need to bypass the country code error generated by the .exe installer.
Or explain to me where these installers "unpack" their files to so I could try and locate them and use the NoID installer from there?
Michael

now only if we can get the english orange rom aswell....

BeyondtheTech said:
MMB was kind enough to post the Qtek 9000 ROM here:
http://s5.yousendit.com/d.aspx?id=12XDPY08OSB2R0PAMI3W42KE3Q
And I will be uploading it to the FTP for everyone else in case the above link expires:
/Uploads/Universal/Shipped ROM/
Even though it has the "latest" ROM date and version number, I seem to be having continuous issues with my Qtek 9000 in the fact that some of my settings refuse to stick:
I have to constantly re-pair my HS850 Bluetooth headset and my GlobalSat BT-338 GPS.
I have to occasionally associate my device to my Wi-Fi router and re-enter my WPA-PSK key.
I have since flashed my device with the JASJAR ROM and the O2 Radio ROM, and customized the JASJAR's Extended ROM to see how much better it performs.
Click to expand...
Click to collapse
I am currently using the Jasjar ROM / Extended Rom and the O2 Radio rom. No real issues so far. I am not sure I should try the update of the Qtek 9000 ROM looking at your comments above.

But is in Italian or English? thx

Unit only display "Serial v1.00" after Qtek ROM fl
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael

Re: Unit only display "Serial v1.00" after Qtek RO
michaelg said:
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Click to expand...
Click to collapse
Try to reflash again, but this time only use the Radio Rom 1.04.02

How can I extract the shipped ROM from my unupgraded UK TMobile MDA Pro?
I will post it up after extraction in case anyone needs it.

stanthebiker said:
How can I extract the shipped ROM from my unupgraded UK TMobile MDA Pro?
I will post it up after extraction in case anyone needs it.
Click to expand...
Click to collapse
See here http://forum.xda-developers.com/viewtopic.php?t=34552&highlight=

Re: Unit only display "Serial v1.00" after Qtek RO
michaelg said:
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Click to expand...
Click to collapse
Hi,
take a look to your pm or look at this:
http://forum.xda-developers.com/viewtopic.php?t=33191
Teja

Hi,
Yes it seemed that a radio only (v 1.04.02) ROM flash got the unit working again.
I did have the SIM and SD card out for several ROM flashes prior, but maybe the combo of all 3 (no SIM, no SD and radio only) was the trick.
Regards
Michael

michaelg said:
Hi,
Yes it seemed that a radio only (v 1.04.02) ROM flash got the unit working again.
I did have the SIM and SD card out for several ROM flashes prior, but maybe the combo of all 3 (no SIM, no SD and radio only) was the trick.
Regards
Michael
Click to expand...
Click to collapse
That is good news. Please let us know how the ROM of the Qtek performs. Currently I am using the Jasjar rom with the O2 rom. No real issue so far.

michaelg said:
Hi,
Can anyone tell me how I can use this ROM with the NoID installer. Again I need to bypass the country code error generated by the .exe installer.
Or explain to me where these installers "unpack" their files to so I could try and locate them and use the NoID installer from there?
Michael
Click to expand...
Click to collapse
If you have WinRAR or WinZip installed, right-click on the executable and choose Extract to [folder]...
Then you can throw in the MaUpgradeUt_NoID.exe file in the same folder and run it.
Someone also said you can add a line [CHECKCEID_TYPE]=1 in the RUU.conf file using Notepad, but I don't think it made a difference for me.

Hi,
Actually the last ROM I flashed was the JasJar so I'm back to square one, but I intend to try the QTek again in a couple of days (just need to settle the nerves a bit after the horror of owning an expensive brick for several hours).
In regards to unpacking the .exe files, I stumbled across that trick with WinRAR myself and I was a little surprised myself. That would make upgrading from other sites so much easier especially with access to the NoID installer.
I might try the NoID and the RUU.dll trick to bypass country code to see if both work (if my heart can stand the strain of more repeats of the brick event).
At the moment I've got a prepaid vodaphone SIM (here in Australia) and I'm working on setting that up. I've been advised that full mobile broadband is only available for billing customers so I'll have to wait until I can visit a shop to sign up and try that.
If anyone has the settings already for vodaphone let me know!
Michael

MDA PRO Qtek ROM
at the moment i am using this QTEK rom.
Just upgraded my MDA PRO and now i am using it.
It is one of the best roms because no programs/logos of O2 / T-Mobile etc. And it runs very fast, dialskin is normal windows (not the one of O2)
I am very happy with it at the moment,
only thing i want is an sim unlock tool so i can use my vodafone sim in the phone!

I AM IN HELL PLEASE HELP!!
Hey guys.
please be gentle with me . . ok so i got the rom . . .
tried to do the upgrade - the damn thing is stuck on the splash screen and will NOT progress
just shows
R. 1.00.02
G 42.33.P8
D 1.12.42 WWE
Now I got the ma upgrade no id thing - but cannot use the bloody thing now!!!
please help, if my mrs finds out she will chew me up!
pleeeaaassseee help!!!
cheers
lr

RADIO v1.03.00 required!!
Hi!
Can somebody extract the QTEK 9000 shipped RADIO v1.03.00 out and post here?
The reason being if after upgrading to the RADIO (from Dopod 900) v1.04.02 and finding it unsuitable later on I would like to re-flash it with the original shipped RADIO.
Thanks

http://www.beyondthetech.com/downloads/phone/upgrades/
I put the JASJAR, QTEK, and XDA EXEC Upgrade Utilities there. Just download the one you want, right-click and extract the files with WinZip or WinRAR...

I'm stuck pon the accursed splash screen - tho i can get bootloader up .. any ideas what i can do?

RE
Hi BeyondtheTech
Thanks.
One question. How to flash the RADIO only?
Thanks again

HTC P3600 Trinity, DUN Profile, WM6?

Can anyone verify if WM6 on the Trinity brings back the Bluetooth DUN profile?
I'm 95% happy with the Dopod WM5 ROM on my P3600, the only thing missing is that I can't get traffic updates to my tomtom 910.

Hi, I am using mun's 2SE rom and I can now get traffic updates on my tomtom 910.
I did not have to do anything special on the SE version, it just worked.
WM5 etc would not see anything other than the BTHF profile.
all workign now
BMF

Very VERY good news, off to go download WM6 now

I just downloaded and installed mun's 2SE (flawless install). Wow is my phone better
Anyway, it does enable TomTom 910's traffic updating. I had to "delete" my phone from the TomTom 910 and then reconnect to it.
Simple.

Is there any possibility this Bluetooth patch can be worked into the WM6 releases for the Hermes??
I have exactly the same problem (no DUN profile), but on the Hermes.

DOH!
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF

badmelonfarmer said:
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF
Click to expand...
Click to collapse
I found solution) here it is http://forum.xda-developers.com/showpost.php?p=1281328&postcount=882

My Tom Tom GO 700 reports this error during the configuration.
"This phone does not report Wireless data connection (DUN) cabalities."
I have loaded mentioned CAB's.(SP1 and BT_DUN) Is ther a hope on getting this going?
thanks Peter

After adding new cabs, delete phone from TomTom, delete TomTom relationship from phone. Resync.

done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.

psimek said:
done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.
Click to expand...
Click to collapse
try to add this reg entries and files... sorry don't have time to make a cab

Thanks MuM,
Phone is recognized, but cannot connect to cingular.
I will try to play with more settings before I go back.
Peter

Where to Install MODEMLINK?
Where should the contents of MODEMLINK be install? Windows dir?
Thanks

mun_rus said:
try to add this reg entries and files... sorry don't have time to make a cab
Click to expand...
Click to collapse
Please kindly advise where I should put those reg entries & files? TKS & RGDS!

dan.gior said:
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Click to expand...
Click to collapse
to connect over usb you need usb rdiver HTC for pc...
here:

to connect over usb you need usb rdiver HTC for pc...
here:

So I'm a bit confused, does that mean we can use a data connection on the Hermes via Bluetooth for the TomTom 910?

I recommend you this thread, that's the way I got tomtom go data connection and plus services working with my wm 6-updated wizard:
http://forum.xda-developers.com/showthread.php?t=314371&page=3#21
dartrax

ervius said:
to connect over usb you need usb rdiver HTC for pc...
here:
Click to expand...
Click to collapse
Thanks worked painlessly on my O2 Orbit (Artemis/3300).
What a great site - I've learnt loads already and lookforward to overclocking next!
Neil

connected my new smartphone shadows with tom tom go 700
After 5 days of struggle, I finally was able to connect my wireless data (DuN) with my tom tom go 700.
What i did is as follows:
extract the attachment and do the following:
1. Unlocked my phone app for tmobile
2. installed WM6_btdun
soft reset
3. copied all files of SPDUNHACK including registary one to the windows folder(\windows)
4. Installed the installed ATCUI, showed me a serial (COM:1) port
softreset
and connected my tom tom...
But as the experts mentioned earlier, while your tom tom is connected, you are not able to surf the net but able to do all other things. It says voice call active.
Good luck!

WM6 compatible wif bbconnect

Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.

kame1986 said:
Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
Click to expand...
Click to collapse
Try searching with a google advanced search - limiting your results to http://forum.xda-developers.com
Try say "BBconnect Trinity" or "Blackberry Trinity".
It's there I promise.

If its there plz point me in the rite direction. wud appreciated muchly !
will also search though.

For KAME1986
Hello,
I have just finish to upload the .cab on rapidshare.
http://rapidshare.com/files/50855639/bbconnect_wm6_pro_4.0.0.90.cab.html
Enjoy.
Private69.
@++++

could you upload not in Rapid pls..
thx

Finally i have a steady WM6 version with works with BBConnect !!
Thx

try this...working on my trin
try the steps here to get bbconnect working.
http://www.sems.org/entry.asp?ENTRY_ID=276
Graytraveler, try .84, 90 did not work for me with a stock Tytn II, but 84 did. Or I used Dutty's latest ROM from Xda-developers.com and .92 worked fine with that.
Hchickers, you can try this:
1. Hard reset.
2. Change device ID, from Start -> Settings -> System -> About -> Device ID to HTC_P3450
3. Install a registry editor, such as Resco (www.resco-net.com) or Total Commander (www.ghisler.com, I use 2.5 beta 3). Then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Then soft reset and install Blackberry Connect. This method worked for some people (they weren't using 750, but still). It might work for you as well.
Click to expand...
Click to collapse
even if this isn't any help for people getting started with BBC on there trins, all new BBC updates get posted there.
p.s. If u dont have bb service from your network before!!, then bbc will never work.

I will pay for a WM6 ROM for hx2795 that really works

Hy Guys, I was looking at the thread in the forum, I need a WM6 ENG Rom for IPaq hx2795 that really works. I can pay by PayPal, let me know who has it or can generate it. I am really tired of WM5, it is very slow and freezes all time. Tks.

Maybe to give a try to kozhura's AKU3_52_hx2000 (WM 5.0 English) for IPAQ hx2000 series. I tried it to my hx2490b and is faster than the original. Look at this thread:
http://forum.xda-developers.com/showthread.php?t=326214&highlight=hx2000
I think works for your device, and someone allready try it.

Russian developers don't sleep....
WM6 for HP iPAQ 2*** series

Very good news!! Thanks a lot

The link to the russian ROM for IPaq hx2*** series does not work... anyone else has any clue where I may find a valid ROM for the hx2795 ? tks.

nunesfl said:
The link to the russian ROM for IPaq hx2*** series does not work... anyone else has any clue where I may find a valid ROM for the hx2795 ? tks.
Click to expand...
Click to collapse
LOL!!!! No comments....

Sorry, it was my conexion here... I am downloading it now and will give it a try. tks.

nunesfl said:
Sorry, it was my conexion here... I am downloading it now and will give it a try. tks.
Click to expand...
Click to collapse
Hi,
How is it going, please let me know once you flashed the ROM,

hi nunesfl,
every thing works fine except A2DP, Did you give a try yet ?

This wm6.0 also has the same BUG of battery drained by automatic active sync running.
ABOUT A2DP:
I think someone here must contact Khozura, he successfully make a2dp worked on hx4700 BT either on WM5.0 & WM6.0 by special patch cab.
Please someone here who knows Khozura ask him to make a patch for hx2000, thus we can enjoy a2dp.
Please..please....
MagLite_RUS said:
Russian developers don't sleep....
WM6 for HP iPAQ 2*** series
Click to expand...
Click to collapse

Another BUG in WM6.0:
When using TCPMP player, you can not hear any audio from wmv video. Strange?? I can play and hear the same video at WM5.0.
abbaml said:
This wm6.0 also has the same BUG of battery drained by automatic active sync running.
ABOUT A2DP:
I think someone here must contact Khozura, he successfully make a2dp worked on hx4700 BT either on WM5.0 & WM6.0 by special patch cab.
Please someone here who knows Khozura ask him to make a patch for hx2000, thus we can enjoy a2dp.
Please..please....
Click to expand...
Click to collapse

I have used this rom on a hx2190, and i have found it impossible to sync my calander, being unable to use any of the windows live programs and there is no remote desktop mobie. Apart from them it seems to work

Hi all, I put it in my hx2795, the A2DP does not work, the fingerprint reader does not work, the TCPMP sometimes work and not with AVI and does not work with WMV.
I can not see the contrast and error reporting tools, I saw a post where the developer said it is a case of editing the registry but does not say where...
The boot at first time did not work I was in panic, after that took out the sd and cf, drained the battery and retried, it booted but I am afraid of rebooting it again...
I did not try Windows Live and sync calendar, hope it works...
I have tried other tools (excel, word) and it worked well.
I am not sure this ROM is stable yet, any sugestions ? should I try reflash it back to WM5 or there is anything I could do to minimize these problems and keep the WM6 ?
Please help.

nunesfl said:
Hi all, I put it in my hx2795, the A2DP does not work, the fingerprint reader does not work, the TCPMP sometimes work and not with AVI and does not work with WMV.
I can not see the contrast and error reporting tools, I saw a post where the developer said it is a case of editing the registry but does not say where...
The boot at first time did not work I was in panic, after that took out the sd and cf, drained the battery and retried, it booted but I am afraid of rebooting it again...
I did not try Windows Live and sync calendar, hope it works...
I have tried other tools (excel, word) and it worked well.
I am not sure this ROM is stable yet, any sugestions ? should I try reflash it back to WM5 or there is anything I could do to minimize these problems and keep the WM6 ?
Please help.
Click to expand...
Click to collapse
OK,
I am having the same hx2795 and I found the following
a) Active Sync is working, When I tried at first time it didn't work. After I did a hard reset then I enabled "Advanced networking" from the "USB" settings menu then it worked
b) Sync over Exchange server working fine
c) WiFi is working, I checked with WEP security
d) Bluetooth is working but A2DP is not working When I tried "High Quality Audio Profile" it says authentication failed, I never see it is asking me for the pass key, so I guess that may be the problem
e) TCPMP works fine for FLASH and AVI movies, WMV does not work because WM6 uses a higher version of codecs, so you have to use WMP or you need to replace the WM5 codecs, search through over the forum you will find a solution
f) Finger print authentication works great.
g) Windows Live and messenger is not working, it says there is no connectivity and I don't know what is the deal. But IM+ is working just fine
h) You can install Finster-WM6_RDP.cab as a Termial Service client, it is very good than the inbuilt RDP client in the original HP ROM and it allows you to connect services that use custom ports
i) ROM seems to be stable and I don't have any problem with other functionalities atleast untill now

HX2790B
hi i have a hx 2790b ipaq and is wondering if there is a WM6 Rom update for it reading this thread it seems there is for the 2000 series, but i cant find the link for wm6 for the 2000 series ipaq's any infomation is appreciated
many thanks
Ben

It works for my hx2490b. The link is here:
rapidshare.com/files/53282580/WM06.rar.html

will this work with transflash / transflash hc cards, and currently my hx2790b will not read a 512 transflash card with sd adaptor, and thats not transflash hc, as i have a 4gb transflash in my N95 and that can read it lol

Dear anavas,
I tried to reboot and reinstall as edcom suggested in another forum. WM6 is working now better and I can reboot.
I could not do 'contrast' and 'error reporting' show, any idea ?

we need some detailed instructions for wm6 on a HX2790b as i have tried all sorts and all i get is incorrect device sku,
please help
am desprate

nunesfl said:
Dear anavas,
I tried to reboot and reinstall as edcom suggested in another forum. WM6 is working now better and I can reboot.
I could not do 'contrast' and 'error reporting' show, any idea ?
Click to expand...
Click to collapse
Hi,
even I don't see the contrast and error reporting menu, so I guess it might be work for some other hx2000 series and not for hx2795, or it may be some registry hack, I don't know