Is there an easy solution to my problem. I mainly use 2 wireless networks on a daily basis. One in the office and one at home. My office network uses fixed IP addresses and DNS servers, my home network has user-assigned IP addresses. Is there an easy way to use both without having to delete the IP address and servers when I am at home. I have only had my PDA2k for a week now and hope someone has a solution for me. Thanks in advance.
Come on guys! Any ideas.
Same situation here. Try 'IP Dashboard':
http://www.pocketgear.com/software_detail.asp?id=9463
It's a today plugin that among other things allows you to setup several wifi profiles (with static IP and DNS for each one) and switch between them.
Works for me.
Thanks! Perfect. Does exactly what I want.
Related
Does anyone know how I can find out the mac address of my xda IIs ? I have a dreytek wireless router at home which uses a mac based access control list. I've tried the addresses that appear in wireless LAN manager ( BSSID and MAC ) but no joy. The only way I can connect is to switch off the access list feature completely
jeff
Hi Jeff,
Switch off the Access control, and let the XDA IIs join the wireless network. Then go into Diagnostic Tools --> View DHCP assigned addresses, and you will get a list of MAC addresses, IP addresses and hosts on the network. Match your phone's name to the MAC address.
Then you can turn access control on again and input the phone's mac address into the "allowed" list.
Thanks for the reply. I've kind of done that as you can see from the DHCP table below
DHCP server: Running
Index IP Address MAC Address Leased Time HOST ID
1 192.168.1.1 00-50-7F-23-97-CC ROUTER IP
2 192.168.1.10 00-00-00-00-00-00 BAD IP
3 192.168.1.11 00-0D-61-4E-A7-F7 0:00:04.600 hubbo
4 192.168.1.12 00-09-2D-0E-49-61 9:24:34.170
(not sure about that BADIP line ! )
I would say my MAC is 00-09-2D-0E-49-61 but it's still not working.... odd.
Is there no way that you can tell the MAC address from the phone without connecting to a network.
Here is a freeware that will allow you to find your MAC with no connection. I used it on my PDA2K.
http://www.freewareppc.com/communication/vxipconfig.shtml
Install on your device. Just turn the wifi on and run the program and it will give you the MAC and additional device info. Don't have the PPC connected to the USB or it will identify that device.
Sorted thanks, whilst in PC World I scanned for a Wireless network, and found three, hehe! Once connected used that utility to get my MAC.
Many thanks!
wifi and drayteck router
hi i see u have a draytech router how did u manage to get streaming video? i have been trying now for hours.I can get the video on my laptop without any problems but my m2000?????
i think the problem lies within the vpn settings as when i try to open http://house:8080 i get the message vpn connection required.
any help would be greatly recived (i have the vigor 2600g)
thanks in advance
delboy
Hi!
I haven't seen any application that can do this after some time looking for it, and I think it may well be the case with some of us.... let me explain..
When at home, I can have a WIFI connection to my home ADSL which needs a 'clean configuration'.. ie.. DHCP address and NO PROXY.
But, when at the office, I can also get the address thru DHCP, but I need to configure a proxy to be able to connect to Internet....
Plus, at some of the sites I work in, I need not only a different proxy, but a 'manually' configured address.
Well, the question... Is there any application that can help with the switching of environements, based, for instance, in the SID of the access point available?
I've seen apps such as CommMgrPro that can 'switch' profiles based on the pohone cell-id (which could also be fine to define your location), but you can only 'switch ON and OFF the WIFI (or any other) connection, but in no case can I manage the proxy (BTW this is a difficult setting to handle even manually!)
Thanks
Prof
http://forum.xda-developers.com/showthread.php?t=355936
Hi
This is a nice program.
But I cant download from your website.
But my Site is online
Here is the link:
http://blog.renestein.net/Wifi+Profiles+For+Windows+Mobile+English+Version.aspx
wow fixes my samsugn gt i8000 wifi problem thanks a lot
take a look at here:
http://forum.xda-developers.com/showthread.php?t=690963
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
here's remote desktop. How do you use it? I don't know how to set it up.
thanks!!!!
now for VPN....
cheers!
The remote desktop client is available in several places in this forum for download.
To set up a VPN:
add a new VPN server connection
enter the name / ip of the server you want to connect to
select the vpn type -- ipsec or pptp
next
enter your user name and password
finish
The only way I have found to connect to the von is to goto
Start-Settings-connections-connections-edit my vpn servers- -- tap & hold MY VPN
select connect
you must be using a plan that assigns you a public IP (not WAP)
hope this helps
JTK said:
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
Click to expand...
Click to collapse
Thanks cmccarter, done it but how will I know I am connected.. It does not say connected anywhere that I can see and when clicking/hold on the item it gives me the option to connect again, not disconnect as I would have thought The other thing is terminal server does not connect. It connects fine on USB. VPN/Remote desktop connects fine using normal internet on pc from outside the network. So I believe the network settings are fine.. How would I know though if I am on WAP or get an IP. Also ow would I know if the VPN is connected?
thanks
fyi
i also have struggled getting rdp to work over a vpn, in particular over 3+/hsdpa
the only i found in wm5 was to add the vpn connect to the exceptions list of the connection manager, so that it didnt disconnect the vpn whem connecting the rdp.
this occurs more when u use an ip address to connect to a work intranet.
suppose if u use the dns name of the machine and not the ip address then it isnt that much of an issue. in wm5 when u put the ip address in it assumes a an internet rather than intranet connection so it disconnects the vpn to look for the ip over the internet
putting the ip into exceptions forced wm5 to not disconnect it when rdp was looking for it.
i cudnt get it to work this way in wm6 so i am also looking for an answer on this.
rdp to my servers when they have crashed and i am on the road wud b wonderful....
Hi,
I've a similar problem.
I use a VPN-1 SecuRemote that normally connect my PC directly to the company network.
Well, using the share modem tool, I'm not able to reach the gateway.
the share modem system give me a private IP that establish a connection between PC and TYTN.
This connection use the Tytn like a gateway to navigate in internet.
Someone know to solve this issue?
Tanks a lot
if i select start the vpn connection, nothing happens - and i can`t ping the IP`s in the VPN. so i think the vpn ist not open - OR the routing entrie is missing....
is there some shiny "pptp - standalone" client?
greets, Nik
for some reason i dont think the vpn option works over 3g/hsdpa, atleast not on my device using t-mob web and walk.
if i connect the vpn when using wifi it connects and everything is fine, if i try and connect when i'm already running a 3g connection it doesn't work.
i dont think the radio stack is capible of handling a 3g connection and a vpn connection. we might need to go down the route of getting a seprate wm vpn client.
I have the HTC Touch HD for a few days now and I love it.
I only have the following problem with wireless network connection.
At home I am using a dynamic IP address at work an static address (wtih different DNS and gateway settings)
Does someone knows an program to set these settings for the different connections?
Thanx!
No one any idea
I think other persons will have the same problem. A tool should be available right?
you shouldn't have any issues really. It's odd that you doi. I use mine to connect to multiple wireless networks and it all works fine.
When you turn on the wireless to connect to a new network it will pop up at the bottom and tell you the networks it has found. Then you choose the network you want and connect to it. This will then store it as a favourite connection. Once this has been done whenever you turn on your wireless it will look for networks in range and then automatically connect to which ever one is in range in the Favourite connection list.
Your connection list can be accessed through Start>Settings>Connections>WiFi then Wireless networks. It may be advisable to delete them all and start again if you are having problemss.
Thanks
Dave
You're right for the wifi settings. But the ip settings (static / dynamic gateway dns) are not set through the wireless connection.
But I have found a program called wifiprofiles which does exactly what I want
So, weird thing started to happen last night. Both my Samsung devices ( my 2014 10.1 and my S4) started failing to get an IP from my wifi network. It would see the wifi network and report a strong signal, but would fail at the obtaining IP address. The IP assignment is handled by a Windows DHCP service running on a domain controller. I work in IT so I have a fairly extensive lab at home with routers, switches, servers, domain controllers, etc. The wireless access point in my home is a WNDR3700 with no WAN port config as my firewall/routing is done by a Cisco ASA 5505. All the 3700 does is provide wireless access to the network, essentially it acts solely as a wifi AP. Every other wireless device on the network is functioning fine including 3 laptops, a Blackberry and two other Android tablets ( Asus Transformers). So I know nothing is wrong with the dhcp or the AP in general. It's not a security issue as it is not failing on authentication, just on obtaining IP. So as a workaround I configured each one with a static IP and, of course, everything works fine.
One thing I noticed that seemed odd was that when I went to change the IP addr the address that was already in there, but greyed out sort of, was the wrong network for my home wifi. The phone and tablet both looked like they had a 192.168.1.0/24 address whereas my home wifi segment is 192.168.0.0/24. So maybe that had something to do with it. At the office now and both my phone and tablet have no issue connecting to our Cisco APs and getting a dhcp config from a Windows DHCP server. So pretty weird situation. I'm fine with leaving them on static config while on my home wifi network. Was just wondering if anyone else has seen this before?
Thanks
For any that might be interested. I used inSSIDer to find a less crowded channel for my 2.4 ghz band at home and both my Samsung devices are connecting and receiving ip addrs now.