HELP NEEDED TO DOWNGRADE BOOTLOADER 5.22 - Upgrading, Modifying and Unlocking

Create a V5.15 Boot Loader to allow boot load functionality and avoid key checking in V5.17+
Requirements:
bootloader_v5_15.nb0 from the self-extracting zip downloadable at:http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
in the 'binaries' folder.
Procedure:
1) Run XDA ROM Image Tool V1.02
2) Select SD Card from the dropdown
3) Choose 'Write to SD card'
4) Click on the radio button for 'before 5.17 (1K)'
5) Click the 'Bootloader' checkbox
6) Click the '...' button and browse to the 'bootloader_v5_15.nb0' file
7) Click 'OK' to write the bootloader ROM to the SD card..
...................................................................................................
After that I am always getting the same message :
Failed to open device \\.\PhisicalDrive4
now what to do, my ver is:
rom ver: 4.01.16eng
rom date: 2/4/04
radio ver: 6.25.02
protocol: 324e4
bootloader: 5.22

nobody here know the answer for my question which I asked above or nobody bothers to answer it. Pls if anybody knows I wont mind if u help me.
thanks in advance.

Related

Asus P535 upgrade WM6 failed, now half bricked.

My P535, 71A version. upgrade WM6 HK version from 4.3.25 HK00.
I used a 256MB miniSD with quick formatted( it's the main reason). extract the upgrade file on it. and start the upgrade procedure.
1st step: insert the miniSD into slot. autorun started and asked to confirm. sure. confirm it.
2nd step: system starting upgrade the bootloader, read, verify, and update ok. it ask to reset with power button pressed. do as requested.
Like attachment 111.jpg
3rd step: the bootloader entered a new uploader version with "force mode" displayed. and loading the main upgrade file ASUSP535.CAP. but checksum failed. it it asked to reset with power button pressed again. do as requested.
Like attachment 222.jpg , I failed at checksum because the miniSD only quickformatted
then the nightmare came. I can't see the blue asus screen. and nothing happen when I press reset. the only valid operations are Power+Camera+Recorder + reset to the SD download mode, and Power+Camera + reset to the USB sync mode. in the SD download mode. system not recognize the *.cap file. it request a NB0 file.
What should I do?
1. Enter the Force mode again with a good formatted miniSD is the best way. but how?
2. Use the USB sync mode upgrade the file, it maybe works. but I can't find the usbloader. in my memory. there is one in the lifeforce cooked ROM pack. but it removed when I visit lifeforce's site today. anyone who download the rom pack before please give me the file. I need a try.
-------------------------updated on 9th Jul 2007---------------------------------------
My P535 has been recovered.
just use a modfied 4.3.25 HK00 NB0 file at the SD download mode, it can reverse to WM5, then repair the extend firm. don't reset, direct run 4.3.25 offical update. switch to another sd card with WM6 upgrade ASUSP535.CAP when it reboot to the sd download update screen. and all will go on.
find an old rom on asus ftp or site.
Rename the rom to galaxyII.nb0
Copy it to the card.
Boot your phone with the card in SD download mode.
The upgrade will start.
Good luck.
For me after the autorun, i pressed ok to restart but the phone still block at the blue screen. I try to reset in sd loader with the new rom in sd, with the galaxy name, and the rom is to big for the phone...
ilan_75 said:
find an old rom on asus ftp or site.
Rename the rom to galaxyII.nb0
Copy it to the card.
Boot your phone with the card in SD download mode.
The upgrade will start.
Good luck.
For me after the autorun, i pressed ok to restart but the phone still block at the blue screen. I try to reset in sd loader with the new rom in sd, with the galaxy name, and the rom is to big for the phone...
Click to expand...
Click to collapse
I had tried as you said. put 4.3.25 HK CAP file on the minSD, and rename it with NB0, but it not work, it return red words with" Wrong Language Version, Update fail!" the system is the HK before update WM6
You may try try here...
http://www.asuspda.net/thread-17850-1-1.html
but not sure does it 100% work...
Good Luck!
Hello,
I've attached the requested tool - and... good luck
A_C said:
You may try try here...
http://www.asuspda.net/thread-17850-1-1.html
but not sure does it 100% work...
Good Luck!
Click to expand...
Click to collapse
thanks, but that's not what I need, because I can't enter the OS already...
windirt said:
thanks, but that's not what I need, because I can't enter the OS already...
Click to expand...
Click to collapse
It is picked from that archive...
lukacs.attila said:
Hello,
I've attached the requested tool - and... good luck
Click to expand...
Click to collapse
sigh... I tried with usb sync, the 79MB cap file can't transfer completely. it just transfered 55MB and stopped.
windirt said:
sigh... I tried with usb sync, the 79MB cap file can't transfer completely. it just transfered 55MB and stopped.
Click to expand...
Click to collapse
I have no idea, but maybe it is because you already upgraded the bootloader?
lukacs.attila said:
I have no idea, but maybe it is because you already upgraded the bootloader?
Click to expand...
Click to collapse
Yes. the first upgrade step is completed, the bootloader version is changed to 2007/04/16.
when I press Power+Rec+UP and reset, it got a Force mode USB Sync. not like the ordinary USB Sync enabled by Power+Rec and reset.
is there a way to get a Force mode with SD Download? so I can use the 79MB CAP if it accessable.
windirt said:
Yes. the first upgrade step is completed, the bootloader version is changed to 2007/04/16.
when I press Power+Rec+UP and reset, it got a Force mode USB Sync. not like the ordinary USB Sync enabled by Power+Rec and reset.
is there a way to get a Force mode with SD Download? so I can use the 79MB CAP if it accessable.
Click to expand...
Click to collapse
Correct me if I am wrong, but there's something written @ asus support site, where you can download the new firmware (it's a step by step how-to). Unfortunately, the support site is down at the moment.
Please follow the below procedures to upgrade:
1.Please format your Mini-SD first.
2.Unzip the file and copy it to Mini-SD card's root folder
(Under Mini-SD's root folder, there should only be folder 2577, AsusP535.cap, and GalaxyII.cap;
In folder 2577, there should only be Autorun.exe).
3.Insert the Mini-SD with upgrade firmware into P535's expansion slot and wait for firmware to setup automatically.
If the firmware didn't execute automatically, please execute Autorun.exe in Storage Card\2577\.
4.Click "System" => "Update ROM"
5.System will enter update mode, here the first part of upgrade will start.
Warningo not interrupt the upgrade process. Please execute the rest of the steps until completing step 8 in order
for the unit to execute normally. After the upgrade is complete, a message in red will be displayed.
Please press and hold power button and reset at the same time to start second part of upgrade.
6.After reboot, it will automatically enter update mode. This upgrade takes about 3 mins, please wait patiently.
Please do not interrupt the upgrade process. After upgrade is done, system will reboot automatically.
7.After reboot, it will install extended ROM automatically. After upgrade is done, system will reboot automatically.
8.Please Confirm version in "Start"=>"Setting"=>"System"=>"System Information"=>"Version".
lukacs.attila said:
Please follow the below procedures to upgrade:
1.Please format your Mini-SD first.
2.Unzip the file and copy it to Mini-SD card's root folder
(Under Mini-SD's root folder, there should only be folder 2577, AsusP535.cap, and GalaxyII.cap;
In folder 2577, there should only be Autorun.exe).
3.Insert the Mini-SD with upgrade firmware into P535's expansion slot and wait for firmware to setup automatically.
If the firmware didn't execute automatically, please execute Autorun.exe in Storage Card\2577\.
4.Click "System" => "Update ROM"
5.System will enter update mode, here the first part of upgrade will start.
Warningo not interrupt the upgrade process. Please execute the rest of the steps until completing step 8 in order
for the unit to execute normally. After the upgrade is complete, a message in red will be displayed.
Please press and hold power button and reset at the same time to start second part of upgrade.
6.After reboot, it will automatically enter update mode. This upgrade takes about 3 mins, please wait patiently.
Please do not interrupt the upgrade process. After upgrade is done, system will reboot automatically.
7.After reboot, it will install extended ROM automatically. After upgrade is done, system will reboot automatically.
8.Please Confirm version in "Start"=>"Setting"=>"System"=>"System Information"=>"Version".
Click to expand...
Click to collapse
Yes, it stopped in step6 as you posted, checksum error.
Upgrade WM6 critical problem
I was trying to upgrade my ASUS P535 rom from V4.3.15 WWWEL_RU to firmware V4.7.12 WWE_TH00
I unzipped the P535_V4712_WWE_TH00_EXT_V120 and copied the files produced to the miniSD card except from file AsusP535.cap
I renamed file GALAXYII.cap to GALAXY.cap and copied it again to miniSD card. Also I copied file ASUS.UnlockLangID to folder 2577 and replaced autorun. (P535 ROM Tools.zip from http://forum.xda-developers.com/showthread.php?t=295778&page=3)
So in miniSD card there are the following files: 2577 folder with autorun and unlocklangid.exe, and in the root, GalaxyII.cap and GALAXY.cap but NOT AsusP535.cap
So I run the update and after the reset I get message ASUSP35.CAP NOT FOUND.
At that point I realise my stupidity (not copying AsusP535.cap to miniSD) so I take the card out, put it in my laptop and copy the AsusP535.cap to mini SD.
I reset the device and stick the card in but I still get the same message ASUSP35.CAP NOT FOUND.
Every time I turn on my device it tries to upgrade rom and I get the mesage. Can someone help please or have I damaged the device beyond repair?
2 mins ago I upgraded my taiwanese p535 to the thailand wm6 rom.
I had already installed a 4.3.15 wwe version, so I figured I could just install the 4.7.12 wwe TH rom without using the "hacked autoexec".
That didn't work, and I was stuck with the blue asus screen.
So I pushed up (on the d-pad) + reset, then "green phone button" (answer button) when it asked if I wanted to.
then reset the phone as soon as it said "performing upgrade" or something like that (when it started installing stuff after windows was booted).
After reboot, I was back at my old 4.3.15 rom.
Then I decided to retry it, following the instructions here:
http://forum.xda-developers.com/showpost.php?p=1352033&postcount=77
(the link to the p525 tools is incorrect. It should be: http://rapidshare.com/files/4612627/ASUS_P525_v3.32.WWE.customized.build.06.zip.html
Edit: The link to the thai wwe rom is incorrect too, it should be: http://dlsvr01.asus.com/pub/ASUS/IA/P535/P535_V4712_WWE_TH00_EXT_V120.rar)
When I followed these instructions the upgrade worked perfectly. I now have 4.7.12 wwe_au00 installed
I can't give any guarantees, And it may be that I was just lucky, but I suggest you try to remove the miniSD, then push up+reset, press "answer button" when it wants you to confirm, and then, after it reboots, press the reset button as soon as it starts the "upgrade". Then (I hope) it will revert back to your previously installed OS.
After that, upgrade to wm6 following the procedure in the link I pasted above.
extract nb0 from cap for asus p535:
wm5:
xda2nbftool.exe -x galaxyII.cap galaxy2.nba 0xA87BC0d5
wm6:
xda2nbftool.exe -x asusp535.cap asusp535.nba 0xa87ba0d5
.nba from .nb0 seems differs for 4 bytes
.nba - first 4 bytes = .nb0
(check it /in device upgrade may be significant - don't knew (i'm use other device)/ )
.nba, .nb0 - standard files as for oher devices - can make modified firmware images as for other ...
I can't give any guarantees, And it may be that I was just lucky, but I suggest you try to remove the miniSD, then push up+reset, press "answer button" when it wants you to confirm, and then, after it reboots, press the reset button as soon as it starts the "upgrade". Then (I hope) it will revert back to your previously installed OS.
After that, upgrade to wm6 following the procedure in the link I pasted above.[/QUOTE]
Unfortunately, when I press up+reset I dont get the option to confirm, it just goes immediately to the same message ASUSP35.CAP NOT FOUND
DaLiV said:
extract nb0 from cap for asus p535:
wm5:
xda2nbftool.exe -x galaxyII.cap galaxy2.nba 0xA87BC0d5
wm6:
xda2nbftool.exe -x asusp535.cap asusp535.nba 0xa87ba0d5
.nba from .nb0 seems differs for 4 bytes
.nba - first 4 bytes = .nb0
(check it /in device upgrade may be significant - don't knew (i'm use other device)/ )
.nba, .nb0 - standard files as for oher devices - can make modified firmware images as for other ...
Click to expand...
Click to collapse
I am sorry but I dont understand the solution you are suggesting
Could you please explain?
ntiouk said:
Unfortunately, when I press up+reset I dont get the option to confirm, it just goes immediately to the same message ASUSP35.CAP NOT FOUND
Click to expand...
Click to collapse
Hold the up button, then press reset while still holding the up button.
are you sure it says "ASUSP35.CAP"?
It doesn't say "ASUSP535.CAP"?
.nb0 - it's another way t program device
press photo + reset - that asks file - resulted .nb0 file for wm5 or wm6 name as device wants - write that to sd (not sdhc) card formatted as fat16 - and insert it to device.

[TUTORIAL]|VERY SIMPLE| Downgrade Desire Hboot 1.03

Hi, This is very very simple
If You want to downgrade Desire Hboot 1.03, then using revolutionary to s-off, please follow the instructions .
Full wipe before. (Recommended)
Steps:
1. Download tools package (attached files) OR THIS LINK
2. Download this HTC Desire ROM (RUU)
3. For branded phones create GoldCard (How to)
4. Extract the tools any where at your computer.
5. Run RUU and wait to appear Android rom update utility screen.
6. Go to Temp directory on C drive on your computer and find folder that RUU extracted in it.
7. Copy the rom.zip and paste it to sdcard and rename it to PB99IMG.zip
8. Connect your phone to computer via USB as charge only and enable USB debugging and Unknown Sources.
9. Run DOWNGRADER on tools folder that you downloaded and extracted it.
10. Follow the instructions on screen (This may take a minute or tow)
11. Your phone will be reset, wait for detect and check the Update Package.
12. After checking update package, press vol-up to begin update process, IN FIRST TIME AFTER PRESSING VOL-UP YOUR PHONE WILL RESET AND DO NOTHING, YOU SHOULD DO AGAIN FOR STEPS 11,12
Notes
The process will flash your recovery partition back to stock
This process will wipe all the data from your phone
The downgrade installs an official stock HTC ROM with Hboot1.02 (You can s-off with revolutionary and after it You can flash any version of Hboot)
Your sdcard should be fat32 formatted
Thanks
teppic74
IF YOU CAN NOT DOWNGRADE HBOOT,WITH THIS TUTORIAL, PLEASE READE THIS POST.
I'm sorry, I have no desire device anymore, so I can't answer and help new questions. I apologize about this.
There is no rom.zip file in C:\Temp or a map with that file after running step 5??
5. Run RUU and wait to appear Android rom update utility screen.
6. Go to Temp directory on C drive on your computer and find folder that RUU extracted in it.
Kurt45 said:
There is no rom.zip file in C:\Temp or a map with that file after running step 5??
5. Run RUU and wait to appear Android rom update utility screen.
6. Go to Temp directory on C drive on your computer and find folder that RUU extracted in it.
Click to expand...
Click to collapse
Hi,
On temp directory at C drive, to find folder that RUU extracted in it, please search these text : "adb.exe" or "rom.zip"
Temp Directory Is not C:\Temp ! For example It is on "C:\Users\Your User Name\AppData\Local\Temp" for WIN7 or VISTA. And for WIN XP It is "C:\Documents and Settings\Your User Name\Local Settings\Temp"
Find It ?
I did find the rom.zip. Does your first version on page http://forum.xda-developers.com/showthread.php?t=1550397 work or is this V2 better?
Kurt45 said:
I did find the rom.zip. Does your first version on page http://forum.xda-developers.com/showthread.php?t=1550397 work or is this V2 better?
Click to expand...
Click to collapse
Hi
Yes, It is work, but V2 is easier than one.
It works!
Thank you a lot.
virus?
Dear All,
I try to download the utility (V2_Downgrade_Hboot1.03__V2.zip), but my antivirus sofware detect: Android.4BB883D9 and i'm not able to download it!
Is real that this file contain this? how I can download this tool?
Thanks to all.
- - -
The file with the "virus" is rageagainstthecage-arm5.bin
corno77 said:
Dear All,
I try to download the utility (V2_Downgrade_Hboot1.03__V2.zip), but my antivirus sofware detect: Android.4BB883D9 and i'm not able to download it!
Is real that this file contain this? how I can download this tool?
Thanks to all.
- - -
The file with the "virus" is rageagainstthecage-arm5.bin
Click to expand...
Click to collapse
Ok, I have created a virtual machine, so now seem to works, but:
Code:
Checking misc partition.
/data/local/mtd0.img: OK
CID retrieved: HTC__405
Modifying misc partition image.
/data/local/fixmtd0.sh: cannot create /sdcard/mtd0bak.img: read-only file system
Flashing misc partition... Flash complete.
If any error occurred here, press ctrl-c and run this utility again.
I run this 2 times but the problem is still present... what can I do?
Sorry.... now everything is working!
corno77 said:
Sorry.... now everything is working!
Click to expand...
Click to collapse
There isn't any viruses
Is Your problem solved ?
Excellent guide Netmsm, saved me a lot of trouble getting the other-half's Desire unrooted.
THANKS!!
netmsm said:
Hi, This is very very simple
If You want to downgrade Desire Hboot 1.03, then using revolutionary to s-off, please follow the instructions .
Full wipe before. (Recommended)
Steps:
1. Download tools package (attached files) OR THIS LINK
2. Download this HTC Desire ROM (RUU)
3. For branded phones create GoldCard (How to)
4. Extract the tools any where at your computer.
5. Run RUU and wait to appear Android rom update utility screen.
6. Go to Temp directory on C drive on your computer and find folder that RUU extracted in it.
7. Copy the rom.zip and paste it to sdcard and rename it to PB99IMG.zip
8. Connect your phone to computer via USB as charge only and enable USB debugging and Unknown Sources.
9. Run DOWNGRADER on tools folder that you downloaded and extracted it.
10. Follow the instructions on screen (This may take a minute or tow)
11. Your phone will be reset, wait for detect and check the Update Package.
12. After checking update package, press vol-up to begin update process, IN FIRST TIME AFTER PRESSING VOL-UP YOUR PHONE WILL RESET AND DO NOTHING, YOU SHOULD DO AGAIN FOR STEPS 11,12
Notes
The process will flash your recovery partition back to stock
This process will wipe all the data from your phone
The downgrade installs an official stock HTC ROM with Hboot1.02 (You can s-off with revolutionary and after it You can flash any version of Hboot)
Your sdcard should be fat32 formatted
Thanks
teppic74
IF YOU CAN NOT DOWNGRADE HBOOT,WITH THIS TUTORIAL, PLEASE READE THIS POST.
Click to expand...
Click to collapse
GUYS IF THE DOWNGRADE DOESNT WORK THEN FIRST PUT IN YOUR USB CABLE FOR HTC AND PLUG IN AS HARD DRIVE, THEN FORMAT YOUR PHONE TO FAT32 THEN CREATE GOLDCARD THEN PUT IN THE ROM FILE INSIDE YOUR PHONE AND GO TO BOOTLOADER AND FOLLOW ONSCREEN INSTRUCTIONS!
Press thanks if helped
Worked just fine..
Download the file from here; https://rapidshare.com/files/2694192893/PB99IMG.zip
Good link: http://revolutionary.io/
Hey Netmsm, it worked a charm.
Grateful for your work and help.:good:
is also working in htc desire c.?
HELP PLEASE !! Phone doesnt shows up update after checking PB99IMG.zip
netmsm said:
Hi, This is very very simple
If You want to downgrade Desire Hboot 1.03, then using revolutionary to s-off, please follow the instructions .
Full wipe before. (Recommended)
Steps:
1. Download tools package (attached files) OR THIS LINK
2. Download this HTC Desire ROM (RUU)
3. For branded phones create GoldCard (How to)
4. Extract the tools any where at your computer.
5. Run RUU and wait to appear Android rom update utility screen.
6. Go to Temp directory on C drive on your computer and find folder that RUU extracted in it.
7. Copy the rom.zip and paste it to sdcard and rename it to PB99IMG.zip
8. Connect your phone to computer via USB as charge only and enable USB debugging and Unknown Sources.
9. Run DOWNGRADER on tools folder that you downloaded and extracted it.
10. Follow the instructions on screen (This may take a minute or tow)
11. Your phone will be reset, wait for detect and check the Update Package.
12. After checking update package, press vol-up to begin update process, IN FIRST TIME AFTER PRESSING VOL-UP YOUR PHONE WILL RESET AND DO NOTHING, YOU SHOULD DO AGAIN FOR STEPS 11,12
Notes
The process will flash your recovery partition back to stock
This process will wipe all the data from your phone
The downgrade installs an official stock HTC ROM with Hboot1.02 (You can s-off with revolutionary and after it You can flash any version of Hboot)
Your sdcard should be fat32 formatted
Thanks
teppic74
IF YOU CAN NOT DOWNGRADE HBOOT,WITH THIS TUTORIAL, PLEASE READE THIS POST.
Click to expand...
Click to collapse
Plz solve this :
While the phone checks for the PB99IMG.zip..
it shows
checking PB99DIAG.zip
no image !
Checking PB99DIAG.nbh
no image or wrong image !
checking PB99IMG.zip
...
then HBOOT page appears...
.tried 5 times ...not working please help
Problem with my bravo
Hi there,
since i only enter the bootloader,so i can't do this step
8. Connect your phone to computer via USB as charge only and enable USB debugging and Unknown Sources.
Do you have workaroud to my problem?
thanks,
Ronald
random.satyajit said:
Plz solve this :
While the phone checks for the PB99IMG.zip..
it shows
checking PB99DIAG.zip
no image !
Checking PB99DIAG.nbh
no image or wrong image !
checking PB99IMG.zip
...
then HBOOT page appears...
.tried 5 times ...not working please help
Click to expand...
Click to collapse
Hi, My Friend
Your "PB99IMG.zip" file might be corrupted ! Or might be manipulation, So You must using the original file
Also may be Your SD-Card is damaged !
Please extract the PB99IMG.zip, if it extracted without ERROR OR Warning So Your SD-Card is healthy .
Otherwise if send ERROR during extracting the PB99IMG.zip, either file or sd-card is corrupted.
OK ?
Best;
ronald_delgeano said:
Hi there,
since i only enter the bootloader,so i can't do this step
8. Connect your phone to computer via USB as charge only and enable USB debugging and Unknown Sources.
Do you have workaroud to my problem?
thanks,
Ronald
Click to expand...
Click to collapse
Hi
You must Connect phone to computer when android is running ! not in BOOTLOADER !
fprado06 said:
is also working in htc desire c.?
Click to expand...
Click to collapse
Hi,
Sorry I did not examined this solution on desire c !

[Q] Still can't unlock Bootloader... Please help!

Hello all. I'm sorry for my English, i'm from Poland.
Okay, i can't do anythink with my HTC HDH. Below is spec of my phone:
Code:
Wersja systemu Android:
2.3.5
Wersja HTC Sense:
3.0
Numer oprogramowania:
3.13.771.2
Wersja jądra:
2.6.35-10.g931a37e
[email protected] #1
Wed Nov 9 14:04:03 CST 2011
Wersja pasma podst.:
12.65.60.29U_26.14.04.28_M
Numer kompilacji:
3.13.771.2 CL208029 release-keys
Wersja przeglądarki:
WebKit/533.1
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
RADIO-26.14.04.28_M
I used many guides like:
http://forum.xda-developers.com/showthread.php?t=2221039 (Can't unlock bootloader, look below:
#1 http://pbrd.co/1cMCkIv
#2 http://pbrd.co/1cMCq2S
#3 http://pbrd.co/1cMCr6Y
Huh?!)
http://forum.xda-developers.com/showthread.php?t=857537 - the same...
AAHK says ~all is okay~ - but it isn't.. Still've 2.3.5 / 3.0 S-ON UHH.
Can anyone help me with VNC / TeamViewer? PLEASE!
I'm waiting for msg!
You need to find a compatible RUU to update you bootloader from .27 to .29. Then unlock your bootloader, either using HTCDEV or the Easy Ace Unlock Tool or the Easy Ace Root Tool. AAHK is retired; the only way to get S-Off now is manually.
I'll send you big beer if you'll help me to find compatible RUU for:
3.13.771.2
maybe you can try this AAHK2 script..this is a simple way and complete script that make your phone completed gain s-off and have custom recovery too,
but still need the right ruu too if the script needed to downgrade the phone first..
hopefully can help..
I don't believe.. Nobody hasn't RUU for 3.13.772.2 ? God...
On the HTC DEV BOOTLOADER - RUU DOWNLOADS is the RUU for my phone:
Code:
H3G UK 3.13.771.2 PD9810000
But look:
Code:
"Verify that you want to update the ROM version:
From:
Image Version:
3.13.771.2
To:
Image Version:
3.13.00"
Code:
"ERROR [190]: ROM IS NOT UPDATED
Your ROM version is not the latest version.
Please upgrade to 3.13.405.1 to apply this RUU to be able to unlock your bootloader.
On your phone, go to Menu > Settings > About phone > Software updates > Check now.
After you have updated, please run the RUU again to upgrade your HBOOT to unlock your phone. We apologize for the inconvenience."
Why, when i'm downloading "the compatible" RUU for My HTC HDH it show these alerts?!
Seentol said:
I don't believe.. Nobody hasn't RUU for 3.13.772.2 ? God...
On the HTC DEV BOOTLOADER - RUU DOWNLOADS is the RUU for my phone:
Code:
H3G UK 3.13.771.2 PD9810000
But look:
Code:
"Verify that you want to update the ROM version:
From:
Image Version:
3.13.771.2
To:
Image Version:
3.13.00"
Code:
"ERROR [190]: ROM IS NOT UPDATED
Your ROM version is not the latest version.
Please upgrade to 3.13.405.1 to apply this RUU to be able to unlock your bootloader.
On your phone, go to Menu > Settings > About phone > Software updates > Check now.
After you have updated, please run the RUU again to upgrade your HBOOT to unlock your phone. We apologize for the inconvenience."
Why, when i'm downloading "the compatible" RUU for My HTC HDH it show these alerts?!
Click to expand...
Click to collapse
Here is your link to 3.13.415.2 if it means something to you:
http://hotfile.com/dl/152413307/1ed..._26.14.04.28_M_release_227469_signed.exe.html
Okay, thank you! I'm downloading it now. Soo, do you think it'll help me with update my HBOOT?
@edit
Error [131]: "Client identificator error"... Uh :/
Seentol said:
Okay, thank you! I'm downloading it now. Soo, do you think it'll help me with update my HBOOT?
@edit
Error [131]: "Client identificator error"... Uh :/
Click to expand...
Click to collapse
Your best bet maybe create a goldcard and flash unbranded ruu
Sent from my Desire HD using xda premium
Okay, i've got ~29 HBOOT version. What now? The best metod to fast and safe got some 4.1.2/4.2.2 rom?
Seentol said:
Okay, i've got ~29 HBOOT version. What now? The best metod to fast and safe got some 4.1.2/4.2.2 rom?
Click to expand...
Click to collapse
have you already tried the AAHK2 script the link that i give to you before...?
with that script you don't need to unlock bootloader with htcdev unlock first..
you just need find the right ruu (PD98IMG-GB1.zip or PD98IMG-GB2.zip or else until GB9.zip) that suitable with your phone cidnum to downgrade first..and then repeated the AAHK2 script to completed all process..
check your cidnum
start your phone in fastboot mode
connect your phone with pc
open andoid SDK in cmd
then type "fasboot getvar all"
in the line "INFO cidnum" that's your cidnum... (sample HTC__001)
sample if your cidnum HTC__001 then download ruu PD98IMG-GB2.zip to use downgrade process first required by AAHK2 script before repeated AAHK2 script to completed all process..
last process after completed and success AAHK2 script..you must flashing the modified/ rooted ruu by Phiber2000 before installing any custom rom..
hopefully this can help...
I'm sorry, it didn't work :/. Cmd terminal say all's okay, but phone is still S-ON...
Now other questions (i didn't found reply for questions):
HBOOT-2.00.0029
Android 2.3.5
HTC Sense 3.0
S-ON
I'll unlock bootloader, so i'm going to htc/dev/bootloader for my ruu (3.13.771.2), downloading, then try to install. BUT - RUU Error [191].
I did Goldcard by "~Goldcard helper~" but what's the next step?
Seentol said:
I'm sorry, it didn't work :/. Cmd terminal say all's okay, but phone is still S-ON...
Now other questions (i didn't found reply for questions):
HBOOT-2.00.0029
Android 2.3.5
HTC Sense 3.0
S-ON
I'll unlock bootloader, so i'm going to htc/dev/bootloader for my ruu (3.13.771.2), downloading, then try to install. BUT - RUU Error [191].
I did Goldcard by "~Goldcard helper~" but what's the next step?
Click to expand...
Click to collapse
you mean you've already running that script for downgrade first and then running 2nd time that script again for completed process with the right step by step process..but the result of the phone still S-ON..?
by the way...i don't have experiences with htcdev unlock but about the goldcard what i know is..if you already had a goldcard now you can continued installing ruu..
I'm sorry. I din't sleep last ~50h. I've got token and i unlocked bootloader. What now for Root and install some rom like cm 10.0?
Seentol said:
I'm sorry. I din't sleep last ~50h. I've got token and i unlocked bootloader. What now for Root and install some rom like cm 10.0?
Click to expand...
Click to collapse
now your phone is already anlocked..then next you must installing custom recovery first..
to do that..
1. you must download recovery.zip from here then rename it as PD98IMG.zip
2. copy that file to the root of your sd card (please make sure nothing any zip file in the root of your sd card)
3. reboot your phone to bootloader and wait until hboot detect your zip file and ask you to install update...then you can confirm yes with volume up.. then wait until finish..
4. when finish...it will ask you to press the power to confirm reboot..so confirm to reboot..
5. now you have success intalling custom recovery... (don't forget to delete PD98IMG.zip from your sd card after success installing recovery)
6. now you can installing any custom rom but don't forget..because the status of your bootloader is still s-on so..you must always flashing the boot.img too through fastboot after every installing new custom rom from the rom.zip it self..
hopefully this can help..and you can enjoy the sleep after this...
It didn't work.. I've only one file, that recovery.zip renamed by me to PD98IMG.zip in root of sd card. I turn on the hboot menu, i'm waiting and nothing happen. Any ideas? ._. Huh, i hate that DHD... Or he doesn't love me.
Seentol said:
It didn't work.. I've only one file, that recovery.zip renamed by me to PD98IMG.zip in root of sd card. I turn on the hboot menu, i'm waiting and nothing happen. Any ideas? ._. Huh, i hate that DHD... Or he doesn't love me.
Click to expand...
Click to collapse
ok..there is still 2nd method...
1. on your computer..extract recovery.zip file..
2. delete a PD98IMG.zip from the sd card you put earlier..then copy recovery.img that you already extracted to your sdk/ adb folder..
3. reboot your phone to bootloader..select fastboot
4. connecting your phone with your computer
5. open sdk folder through cmd..then type "fastboot flash recovery recovery.img" wait until finish..
6. reboot to bootloader again and check your recovery
7. if success now your phone have 4EXT Recovery Tuch
by the way may i know what a brand of you sd card..?
maybe this is cause of HBOOT can't read PD98IMG.zip file because of some brand of the sd card can't compatible reading from HBOOT..
hopefully this work..
Okay, i've got ****UNLOCKED****
The last question.
I've S-ON RL and cyanogenmod10.1.zip + gapps. How can i flash the kernel? I tried to use Kernel Update Utility, but i've there 3 options:
- Select a cwm zip (i don't look at this)
* Select Kernel
* Select Kernel Modules.
Okay, i selected kernel, but i can't go to the next step, because it can't be done without "kernel modules" what's it?
(Ye, i've CWM, etc)
@edit
in cmd.exe "fastboot flash boot boot.img" for kernel didn't work. Uh, one step to get free from that hated (by me) sense...
Seentol said:
Okay, i've got ****UNLOCKED****
The last question.
I've S-ON RL and cyanogenmod10.1.zip + gapps. How can i flash the kernel? I tried to use Kernel Update Utility, but i've there 3 options:
- Select a cwm zip (i don't look at this)
* Select Kernel
* Select Kernel Modules.
Okay, i selected kernel, but i can't go to the next step, because it can't be done without "kernel modules" what's it?
(Ye, i've CWM, etc)
@edit
in cmd.exe "fastboot flash boot boot.img" for kernel didn't work. Uh, one step to get free from that hated (by me) sense...
Click to expand...
Click to collapse
just extracted boot.img from cyanogenmod10.1.zip..then copy sdk/ adb folder that you have..
then reboot your phone to bootloader..then select "FASTBOOT"..
connect your phone to the computer until in the phone "FASTBOOTUSB"
open sdk through cmd and then type command "fastboot flash boot boot.img"...finish and done..
Thank you very much!
I've now Cyanogenmod 10.1 nightly + gapps.
Finally - rooted, fast phone
Seentol said:
Thank you very much!
I've now Cyanogenmod 10.1 nightly + gapps.
Finally - rooted, fast phone
Click to expand...
Click to collapse
you're welcome..
glad to hear that..hope you can always enjoy your dhd now..

Please Help me ' Variant system version ' M8

Hello guys ,
i hope some one can help me in that case . i just a m8 one mobile from an online site
it's good but when i have tried to update it this message appeared :
'Variant system version - We have determined that your phone may be running a modified version of its system software. For your protection, we cannot update your phone. Please revert your phone to the official HTC system software to update your phone. If you did not modify your system software or would like help reverting your system please contact us via the support section at HTC - Mobile Phones, Smartphones, Cell Phones, Tablets'
And that some of information what i can got .
***Software status: Modified***
***UNLOCKED***
M8_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.24.21331147A1.09G
OpenDSP-v48.2.2-00564-M8974_FO.1211
OS-4.18.708.12
eMMC-boot 2048MB
Jan 15 2015, 23:49:38.0
Software number : 3.28.709.5
Baseband Version : 1.24.21331147A1.09G_20.68.4196.01_F
Build number : 3.28.709.5 CL389838 release-keys
So If you want more information tell me how i can get it to you
So please help me guys
Hello,
Please provide your phone's CID & MLDELID. To solve this problem, you need to either restore a stock firmware & stock twrp backup, or flash a stock RUU. Either way, the firmware & software must have matching cid & modelid.
As of right now, the data you posted indicate that your phone has mismatching firmware & software (x.xx.708 and x.xx.709).
Cheers
I'm really sorry i don't know how to get the information so, Could you please tell me how i can provide you phone's CID & MLDELID ? i mean the steps for it !
Mike Smaan said:
I'm really sorry i don't know how to get the information so, Could you please tell me how i can provide you phone's CID & MLDELID ? i mean the steps for it !
Click to expand...
Click to collapse
Install Terminal Emulator for Android from Google Play Store. Run commands:
getprop ro.cid
getprop ro.mid
rv_30 ! Thank you man
i got them my cid : HTC_622
And my Mid : OP6B63000
shirreer said:
Hello,
Please provide your phone's CID & MLDELID. To solve this problem, you need to either restore a stock firmware & stock twrp backup, or flash a stock RUU. Either way, the firmware & software must have matching cid & modelid.
As of right now, the data you posted indicate that your phone has mismatching firmware & software (x.xx.708 and x.xx.709).
Cheers
Click to expand...
Click to collapse
i got them my cid : HTC_622
And my Mid : OP6B63000
Mike Smaan said:
i got them my cid : HTC_622
And my Mid : OP6B63000
Click to expand...
Click to collapse
Your device is Asia-HK-CHT variant.
Please visit the link below to find answers and links that resolve your exact issue:
http://forum.xda-developers.com/htc-one-m8/help/help-returning-to-stock-hon-kong-htc-t3005829
There are links to stock RUU directly from HTC as well as twrp backup+firmware for you.
Good luck
shirreer said:
Your device is Asia-HK-CHT variant.
Please visit the link below to find answers and links that resolve your exact issue:
http://forum.xda-developers.com/htc-one-m8/help/help-returning-to-stock-hon-kong-htc-t3005829
There are links to stock RUU directly from HTC as well as twrp backup+firmware for you.
Good luck
Click to expand...
Click to collapse
Thank you for trying help me , but unfortunately the link from jan,2015 it's not working or missed . and i'm really want back to to stop or do any thing to update the phone
I'm sorry for bothering you sir
Mike Smaan said:
Thank you for trying help me , but unfortunately the link from jan,2015 it's not working or missed . and i'm really want back to to stop or do any thing to update the phone
I'm sorry for bothering you sir
Click to expand...
Click to collapse
It's no bother, but, you missed the post that says:
Originally Posted by xunholyx *
Okay. So I did a little research and came up with an official HTC RUU for your phone. As far as I know, it is the latest for the Hong Kong version (4.4.3). I say as far as I know because I don't deal with HK versions very often here.
Hook up to your PC and get into ADB/fastboot.
Download the official RUU from HTC's website by clicking here.
http://dl4.htc.com/RomCode/Source_and_Binaries/m8uhl-3.4.0-gf17cce1.zip
Reply
Thanks to your help, I have successfully returned to stock! Thank you for the kind and quick reply!
shirreer said:
It's no bother, but, you missed the post that says:
Originally Posted by xunholyx *
Okay. So I did a little research and came up with an official HTC RUU for your phone. As far as I know, it is the latest for the Hong Kong version (4.4.3). I say as far as I know because I don't deal with HK versions very often here.
Hook up to your PC and get into ADB/fastboot.
Download the official RUU from HTC's website by clicking here.
http://dl4.htc.com/RomCode/Source_and_Binaries/m8uhl-3.4.0-gf17cce1.zip
Reply
Thanks to your help, I have successfully returned to stock! Thank you for the kind and quick reply!
Click to expand...
Click to collapse
that link isn't exist and when i downloaded the offical rom for M8 called :
RUU_M8[email protected]50319A_40.45.C33065.00_F_release_446225_signed_2
while updating error came called " Model ID ERROR " ..
So what i should do now ?
Mike Smaan said:
that link isn't exist and when i downloaded the offical rom for M8 called :
RUU_M8[email protected]50319A_40.45.C33065.00_F_release_446225_signed_2
while updating error came called " Model ID ERROR " ..
So what i should do now ?
Click to expand...
Click to collapse
Here's a thread with a link for the firmware you need. Follow the instructions on how to properly install your firmware. http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
---------- Post added at 01:58 PM ---------- Previous post was at 01:54 PM ----------
The firmware you tried to install is not the correct one for your phone. Scroll down to the firmware for your CID: HTC__622 and MID: 0P6B63000 and you should be fine.
Mike Smaan said:
that link isn't exist and when i downloaded the offical rom for M8 called :
RUU_M8[email protected]50319A_40.45.C33065.00_F_release_446225_signed_2
while updating error came called " Model ID ERROR " ..
So what i should do now ?
Click to expand...
Click to collapse
You can't just flash any file you please. RUU & firmware you want to flash MUST be specific for your device's region and variant model - in your case, you must flash ASIA-HK-CHT firmware & software. ATT & CINGULAR are US specific, and will not flash on your phone without modifications.
Instead, download the 1.60.x.x from the link provided by @Jerrel7, and the TWRP stock backup from 1.60.708.x provided below:
https://mega.co.nz/#!e8AFCCQZ!2-2Lx1vxkg1xBq_Yhg_Sk9AOzdZsPrX2oOlxy-PLTF0
Flashing the 1.60.x.x firmware and restoring the 1.60.x.x twrp backup will put your device in a stock condition that will allow you to receive official updates from HTC.
Cheers
P.S. let us know if you need help restoring the backup or flashing the firmware.
shirreer said:
You can't just flash any file you please. RUU & firmware you want to flash MUST be specific for your device's region and variant model - in your case, you must flash ASIA-HK-CHT firmware & software. ATT & CINGULAR are US specific, and will not flash on your phone without modifications.
Instead, download the 1.60.x.x from the link provided by @Jerrel7, and the TWRP stock backup from 1.60.708.x provided below:
https://mega.co.nz/#!e8AFCCQZ!2-2Lx1vxkg1xBq_Yhg_Sk9AOzdZsPrX2oOlxy-PLTF0
Flashing the 1.60.x.x firmware and restoring the 1.60.x.x twrp backup will put your device in a stock condition that will allow you to receive official updates from HTC.
Cheers
P.S. let us know if you need help restoring the backup or flashing the firmware.
Click to expand...
Click to collapse
Sir i'm going to try it .. but unfortunately i don't know the way to flashing firmware and install twrp or recovery ! i'm always got unknown error like in Fastboot i don't Device offline ... daemon not running - something like that .. ! so please i need step by step what i have to do first because it's my first time to do software
Thank you for your time
Hello. I had the same problem. Just solved it yesterday. The whole problem was in my MID. You have to change it for the RUU you want to install.
I was with MID for Singapore and i wanned to install European version. So i can't install the updates. After i changed the MID now i'm able to install every update.
Just follow this thread and you're done. Good luck, mate!
http://forum.xda-developers.com/showthread.php?t=2708581
Jared89 said:
Hello. I had the same problem. Just solved it yesterday. The whole problem was in my MID. You have to change it for the RUU you want to install.
I was with MID for Singapore and i wanned to install European version. So i can't install the updates. After i changed the MID now i'm able to install every update.
Just follow this thread and you're done. Good luck, mate!
http://forum.xda-developers.com/showthread.php?t=2708581
Click to expand...
Click to collapse
@Mike Smaan problem is a bit different from yours and he has a S-On device.
His problem is his device is running a Taiwan ROM on a Hong Kong variant device.
He needs to run a Hong Kong ROM to solve his problem and the right ROM version (4.18.708.12)
then he can OTA to the latest Marshmallow 6.16.708.1
Should he followed the link provided by @Jerrel7 on post #11, he should be able to fix his problem as simple as ABC.
Mike Smaan said:
Sir i'm going to try it .. but unfortunately i don't know the way to flashing firmware and install twrp or recovery ! i'm always got unknown error like in Fastboot i don't Device offline ... daemon not running - something like that .. ! so please i need step by step what i have to do first because it's my first time to do software
Thank you for your time
Click to expand...
Click to collapse
Very well. Assuming you downloaded the twrp backup and stock firmware from my previous post, proceed as follows:
1. Download HTC Sync from the link below:
http://www.htc.com/uk/support/software/htc-sync-manager.aspx
If you already have HTC Sync installed, then upgrade it to the latest version. Otherwise, install the one from the link provided.
Reboot your PC.
2. Download the FASTBOOT PACKAGE from the link below:
https://drive.google.com/file/d/0B8L4pkbzdlR3eTlJSjdKVEdHX1U/view
Extract the file to "c:\fastboot" folder.
3. Download twrp 2.7.0.2 from:
https://dl.twrp.me/m8/
Extract the file to "c:\fastboot" folder.
4. Put the 1.60.708.x firmware zip you downloaded from my previous post into the "c:\fastboot" folder but don't extract it.
Summary:
You should now have:
A. the latest HTC SYNC installed.
B. A folder called fastboot in the root directory of your C:\ drive.
C. Your fastboot folder has the following files:
I. twrp 2.7.0.2.img
II. The zip file for 1.60.x.x firmware
III. htc _fastboot.exe
Let me know when you're done.
shirreer said:
Very well. Assuming you downloaded the twrp backup and stock firmware from my previous post, proceed as follows:
1. Download HTC Sync from the link below:
http://www.htc.com/uk/support/software/htc-sync-manager.aspx
If you already have HTC Sync installed, then upgrade it to the latest version. Otherwise, install the one from the link provided.
Reboot your PC.
2. Download the FASTBOOT PACKAGE from the link below:
https://drive.google.com/file/d/0B8L4pkbzdlR3eTlJSjdKVEdHX1U/view
Extract the file to "c:\fastboot" folder.
3. Download twrp 2.7.0.2 from:
https://dl.twrp.me/m8/
Extract the file to "c:\fastboot" folder.
4. Put the 1.60.708.x firmware zip you downloaded from my previous post into the "c:\fastboot" folder but don't extract it.
Summary:
You should now have:
A. the latest HTC SYNC installed.
B. A folder called fastboot in the root directory of your C:\ drive.
C. Your fastboot folder has the following files:
I. twrp 2.7.0.2.img
II. The zip file for 1.60.x.x firmware
III. htc _fastboot.exe
Let me know when you're done.
Click to expand...
Click to collapse
I did all that but what do you mean about the zip file for 1.60.xx firmware .. do you mean M8_1.60.708.2.zip ?
And tell me the next step
Mike Smaan said:
I did all that but what do you mean about the zip file for 1.60.xx firmware .. do you mean M8_1.60.708.2.zip ?
And tell me the next step
Click to expand...
Click to collapse
Yes, I did mean M8_1.60.708.2.zip
Now, buckle up...
There are 4 easy steps to accomplish the task:
1. Flash twrp custom recovery. 2. Restore the twrp backup. 3. Flash the stock firmware. 4. Profit.
Let's get down to business:
1. Flash twrp custom recovery:
A. Boot your phone into fastboot. You do this by turning your phone off, then hold Vol- and power button. You're presented with a menu, choose fastboot (navigate the menu using vol+ and vol-) and press power to select.
B. connect your phone to your PC. Open a cmd window:
Type:
cd c:\fastboot
fastboot flash recovery twrp-2.7.0.2-m8.img
Flashing will take a few seconds, when its done, type:
fastboot erase cache
Now, on your phone, select "hboot", then "recovery", to boot into twrp.
2. Restore the twrp backup:
Unfortunately, twrp doesn't immediately create the directory structure for where you'll put the backup file you downloaded. So, we're going to start by creating a backup of your current ROM:
A. Select Backup button in twrp. Select "external sdcard" from the menu at the top, and proceed to create the backup.
B. On your computer, extract the twrp backup file you downloaded, and copy the extracted directory to your phone's sd card. Put it in:
/sdcard/twrp/backups/"serial number"/
C. On your phone, tap restore, and choose the backup directory you just copied to your sdcard. Proceed to restore.
D. Choose to restart your phone and select Bootloader.
E. Select fastboot.
3. Flash the stock firmware:
A. On your PC's cmd window, type:
fastboot oem rebootRUU
B. WAIT UNTIL your phone displays black screen with HTC in white, then type:
fastboot flash firmware M8_1.60.708.2.zip
C. Once more, type:
fastboot flash firmware M8_1.60.708.2.zip
D. Reboot by Typing:
fastboot reboot
4Profit.
shirreer said:
Yes, I did mean M8_1.60.708.2.zip
Now, buckle up...
There are 4 easy steps to accomplish the task:
1. Flash twrp custom recovery. 2. Restore the twrp backup. 3. Flash the stock firmware. 4. Profit.
Let's get down to business:
1. Flash twrp custom recovery:
A. Boot your phone into fastboot. You do this by turning your phone off, then hold Vol- and power button. You're presented with a menu, choose fastboot (navigate the menu using vol+ and vol-) and press power to select.
B. connect your phone to your PC. Open a cmd window:
Type:
cd c:\fastboot
fastboot flash recovery twrp-2.7.0.2-m8.img
Flashing will take a few seconds, when its done, type:
fastboot erase cache
Now, on your phone, select "hboot", then "recovery", to boot into twrp.
2. Restore the twrp backup:
Unfortunately, twrp doesn't immediately create the directory structure for where you'll put the backup file you downloaded. So, we're going to start by creating a backup of your current ROM:
A. Select Backup button in twrp. Select "external sdcard" from the menu at the top, and proceed to create the backup.
B. On your computer, extract the twrp backup file you downloaded, and copy the extracted directory to your phone's sd card. Put it in:
/sdcard/twrp/backups/"serial number"/
C. On your phone, tap restore, and choose the backup directory you just copied to your sdcard. Proceed to restore.
D. Choose to restart your phone and select Bootloader.
E. Select fastboot.
3. Flash the stock firmware:
A. On your PC's cmd window, type:
fastboot oem rebootRUU
B. WAIT UNTIL your phone displays black screen with HTC in white, then type:
fastboot flash firmware M8_1.60.708.2.zip
C. Once more, type:
fastboot flash firmware M8_1.60.708.2.zip
D. Reboot by Typing:
fastboot reboot
4Profit.
Click to expand...
Click to collapse
I did all steps and i got backup ! but unfortunately when i wrote fastboot flash firmware M8_1.60.708.2.zip i got error called " error : cannot open ' M8_1.60.708.2.zip '
Should i try it with that way :-
B. On your computer, extract the twrp backup file you downloaded, and copy the extracted directory to your phone's sd card. Put it in:
/sdcard/twrp/backups/"serial number"/
C. On your phone, tap restore, and choose the backup directory you just copied to your sdcard. Proceed to restore.
D. Choose to restart your phone and select Bootloader.
Mike Smaan said:
I did all steps and i got backup ! but unfortunately when i wrote fastboot flash firmware M8_1.60.708.2.zip i got error called " error : cannot open ' M8_1.60.708.2.zip '
Click to expand...
Click to collapse
I know that you ignored my previous posts and other people post who tried to help you with proper method .. but I still pity you and I don't want to see you'll end up in a brick or soft brick due to wrong commands/instructions.
You get error when flashing firmware - reasons :
1. That command given to you to flash firmware - fastboot flash firmware M8_1.60.708.2.zip - is wrong.
The right command is fastboot flash zip M8_1.60.708.2.zip
Running a wrong command may brick your device but you are lucky because your device is S-On, so no harm just error.
2. Being a S-On device, you won't be able to install a very low version firmware 1.60.708.2 when your current one is 4.18.708.12
Only S-Off device can do that. To have S-Off you need to spend USD25 for the app .. and are you willing to spend USD25 to S-Off when you can fix your problem with proper method free of charge and needs only 2 main steps : ?
1. Restore 4.18.708.12 TWRP backup
2. Install 4.18.708.12 stock recovery.img
then you can update to the latest - 6.16.708.1
Mike Smaan said:
Should i try it with that way :-
B. On your computer, extract the twrp backup file you downloaded, and copy the extracted directory to your phone's sd card. Put it in:
/sdcard/twrp/backups/"serial number"/
C. On your phone, tap restore, and choose the backup directory you just copied to your sdcard. Proceed to restore.
D. Choose to restart your phone and select Bootloader.
Click to expand...
Click to collapse
You can try these B., C., and D.
But, again using a very low version 1.60.708.2 backup on a Lollipop firmware 4.18.708.12, you may have one of these :
1. It will be successful updates but you need to do many OTAs
1.60.708.2 --> 2.11.708.2 --> 3.32.708.4 --> 4.18.708.12 --> 6.16.708.1
If it is successful then it's good but if it is not, you'll get below.
2. You may have a blank screen either between OTA 1.60.708.2 --> 2.11.708.2 or OTA 2.11.708.2 --> 3.32.708.4
3. You may lost your wifi connectivity either between OTA 1.60.708.2 --> 2.11.708.2 or OTA 2.11.708.2 --> 3.32.708.4 but you can proceed further with your mobile data or use a Internet Pass through on your PC
One last note ... never use a 2.7.0.2 TWRP recovery as that is the most buggiest TWRP which will remove your OS version on your bootloader.
Good luck.

Ane-lx3c605e2r1p3b121 (9.1.0.121)

Hello, I have always wanted to collaborate with some content, they will apologize for my bad English:fingers-crossed:
I'll show you how to update, p20 Lite ANE-LX3 Android 9
First of all I'm not responsible for broken devices
it will erase everything as a backup
Steps to follow and mandatory:
0: Backup
1: have bootloader unlocked
2: Team Recovery (thanks to the creator of Recovery)
Links:https://mega.nz/#!EcFmWSDD!Djg2_w9tgHlywyuYn2poyxCtatWQK-Pu-7CfsEYRw4o
Required to install it using Minimal ADB and Fastboot
3: download android 9 the two mandatory links
liks:https://mega.nz/#!UYcw2a4Y!9wVR625-FBB-3J9pse18xguR8SLx78KiHD7MPOrhDuk
4: download HuRUpdater_0.4.zip (thanks to the creator)
* Link:https://mega.nz/#!EY8FDYaB!nMjllhR5kI_UyxDvgM1-LSnF6Hg10jjJ1_NAj5DR_as
5: create a folder with the name Dload, and copy the three files in Zip (without unzipping) before copying to your SD memory, we will rename the file: update_full_ANE-L03_hw_la.zip by name: (update_data_public.zip)
6: copy the Dload folder to SD card
7: turn off the phone: we go to Recovery: button Volume up more button power will enter Recovery team
8:do not do any cleaning (wipe)
9: once in Team win Recovery we do not direct to (Mount) and (Select all): cache, cust, data, ODM, product, splash2, system, vendor, version, micro SD card, (USB_Otg does not apply in this case) Modem_fw, modem_om, modem_secure, modemnmm_img and (mount systeam patition ready-only
*** if all is well we continue with step # 10
(if for some reason you can not Select (data, vendor, version)
** steps to repair data and be able to mount:
*** 1: wipe
*** 2: advanced Wipe
*** 3: select the option data Rapair or change File System
*** 4: Repair File System
*** 5: Chance File System (EXT4)
This same step applies for (Vendor, version)
** Return to the menu team Recovery enter (Mount) and step # 9
10: we go to menu again with select option (install) Select Storage (select Micro SD card ok)
* We are looking for our Dload Folder with our Zip Files
and select HuRupdater_0.4.zip ..... Swipe To confirm Flash (it will show us a message saying) Press Volume Down to continue this script this might take a afew minutes
* at that moment press volume down and start flashing ... no fear will show an error at the end, when it finishes Go back to the menu, turn off the phone (do not reboot)
*** do not do any (never do Wipe)
11: we started in ERECOVERY
** Turn on the phone by pressing the volume button up and power button until you start ERECOVERY (that's where you clean the system) Reboot
Update ANE-LX3
ANE-LX3C771E4R1P7B134 (9.1.0.134)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3948/g1755/v265358/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...l/ANE-L03_hw_la/update_full_ANE-L03_hw_la.zip (Change the name to update_data_public.zip)
ANE-LX1C109E3R1P3B134 (9.1.0.134)
http://update.hicloud.com:8180/TDS/d...ull/update.zip do not change the name (update.zip es el correcto)
http://update.hicloud.com:8180/TDS/d...orange_all.zip change the name (update_data_public.zip)
https://i.ibb.co/mCLm9Kd/Screenshot-20190416-192939-com-android-settings.jpg
https://i.ibb.co/hLDZPL8/Screenshot-20190416-192920-com-android-settings.jpg
https://i.ibb.co/68r0N7f/Screenshot-20190416-192913-com-android-settings.jpg
https://i.ibb.co/LZ5NNqq/Screenshot-20190416-192834-com-huawei-android-launcher.jpg
https://i.ibb.co/4Zk5VVW/Screenshot-20190416-192849-com-huawei-android-launcher.jpg
https://i.ibb.co/M5521Jz/Screenshot-20190416-192802-com-huawei-android-launcher.jpg
https://i.ibb.co/qCd8y5L/Screenshot-20190416-192745-com-android-settings.jpg
https://i.ibb.co/dJZxTYY/Screenshot-20190416-192738-com-android-settings.jpg
I have an unlocked bootloader..... will it remain unlocked after doing this?
Does this firmware (or security patch level) also blocks the possibility of Downgrades?
lalovzg said:
I have an unlocked bootloader..... will it remain unlocked after doing this?
Does this firmware (or security patch level) also blocks the possibility of Downgrades?
Click to expand...
Click to collapse
I think you can not do it.
danielvilla1 said:
I think you can not do it.
Click to expand...
Click to collapse
What do you mean?
I can not do... What?
lalovzg said:
I have an unlocked bootloader..... will it remain unlocked after doing this?
Does this firmware (or security patch level) also blocks the possibility of Downgrades?
Click to expand...
Click to collapse
you can not degrade friend, and the bootloader is always unlocked
lalovzg said:
I have an unlocked bootloader..... will it remain unlocked after doing this?
Does this firmware (or security patch level) also blocks the possibility of Downgrades?
Click to expand...
Click to collapse
You can downgrade. With an unlocked bootloader you can get beta downy to downgrade back to emui 8. I tested it myself
hello i flashed successfully the new firmware but in About phone screen i cannot see the model neither the build number the first on appears as unknown and the other as a blank space what can i do?
josetup123 said:
hello i flashed successfully the new firmware but in About phone screen i cannot see the model neither the build number the first on appears as unknown and the other as a blank space what can i do?
Click to expand...
Click to collapse
(if for some reason you can not Select (data, vendor, version)
** steps to repair data and be able to mount:
*** 1: wipe
*** 2: advanced Wipe
*** 3: select the option data Rapair or change File System
*** 4: Repair File System
*** 5: Chance File System (EXT4)
This same step applies for (Vendor, version)
** Return to the menu team Recovery enter (Mount) and step # 9
Example:https://ibb.co/jvPhrP7
:https://ibb.co/Vqrz3Km
Repair 1: data, version, vendor
When I repair the partitions, (mounts) everything again and so the flashing https://ibb.co/8rvDwjn
bryan.stelios said:
(if for some reason you can not Select (data, vendor, version)
** steps to repair data and be able to mount:
*** 1: wipe
*** 2: advanced Wipe
*** 3: select the option data Rapair or change File System
*** 4: Repair File System
*** 5: Chance File System (EXT4)
This same step applies for (Vendor, version)
** Return to the menu team Recovery enter (Mount) and step # 9
Click to expand...
Click to collapse
Friend before flashing the rom again mounts all the partitions,
Before flashing everything has to be mounted in this order
Link:https://ibb.co/8rvDwjn
dcduartee said:
You can downgrade. With an unlocked bootloader you can get beta downy to downgrade back to emui 8. I tested it myself
Click to expand...
Click to collapse
Can you explain?
I tried to do it but I have stuck with bootloop hell between TWRP logo and the unlocked bootloader warning, nothing loads anymore. The only thing I can get into is fastboot which shows it's still ulocked, no FRP and I am able to but a new recovery img but it still does not load, same bootloop keeps going on.
Link doesnt work
This link
ANE-LX1: Link: (i cant post the link)
Can i do the same with firmware Finder zips?
Jckreon said:
This link
ANE-LX1: Link: (i cant post the link)
Can i do the same with firmware Finder zips?
Click to expand...
Click to collapse
ANE-LX1C109E3R1P3B134 (9.1.0.134)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3948/g1755/v264872/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...orange_all/update_full_ANE-L01_orange_all.zip
ANE-LGRP2-OVS 9.1.0.134
http://update.hicloud.com:8180/TDS/...48/g1755/v264799/f1/full/update_full_base.zip
ANE-LX1C185E3R1P8B132 (9.1.0.132)
ANE-L21C185E3R1P8B132 (9.1.0.132)
ANE-L01C185E3R1P8B132 (9.1.0.132)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3948/g1755/v264413/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_ANE-L21_hw_meafnaf.zip
Fuente:Firmware Finder:good:
bryan.stelios said:
ANE-LGRP2-OVS 9.1.0.134
http://update.hicloud.com:8180/TDS/...48/g1755/v264799/f1/full/update_full_base.zip
Fuente:Firmware Finder:good:
Click to expand...
Click to collapse
Hei!
You write, copy all 3 zip files, but when i download ANE-LGRP2-OVS 9.1.0.134 there are only one update_full_base.zip, and second are HuRUpdater_0.4.zip
can i instal only one huawei zip, or need to be 2 zip files, update.zip and update_data_public.zip ??? i dont undesrstand, because downloading only one zip :/
So, i need to rename this "update_full_base.zip" to somthing different, or not?
thanks for help
Arnys said:
Hei!
You write, copy all 3 zip files, but when i download ANE-LGRP2-OVS 9.1.0.134 there are only one update_full_base.zip, and second are HuRUpdater_0.4.zip
can i instal only one huawei zip, or need to be 2 zip files, update.zip and update_data_public.zip ??? i dont undesrstand, because downloading only one zip :/
So, i need to rename this "update_full_base.zip" to somthing different, or not?
thanks for help
Click to expand...
Click to collapse
I think you need to download the two lx1 links and rename one of them
Arnys said:
Hei!
You write, copy all 3 zip files, but when i download ANE-LGRP2-OVS 9.1.0.134 there are only one update_full_base.zip, and second are HuRUpdater_0.4.zip
can i instal only one huawei zip, or need to be 2 zip files, update.zip and update_data_public.zip ??? i dont undesrstand, because downloading only one zip :/
So, i need to rename this "update_full_base.zip" to somthing different, or not?
thanks for help
Click to expand...
Click to collapse
Update ANE-LX3
ANE-LX3C771E4R1P7B134 (9.1.0.134)
http://update.hicloud.com:8180/TDS/d...ull/update.zip
http://update.hicloud.com:8180/TDS/d...-L03_hw_la.zip (Change the name to update_data_public.zip)
HuRUpdater_0.4
https://mega.nz/#!EY8FDYaB!nMjllhR5k...jjJ1_NAj5DR_as
create the Dload folder, and copy the 3 Zip Files,
then, copy the Dload folder in your MicroSD
Start Recovery Team, Do not do any type of cleaning (wipe) and flash HuRUpdater_0.4.zip (Volume Down and the room is installed)
and the rest reads the tutorial friend XDD:bueno:
bryan.stelios said:
ANE-LX1C109E3R1P3B134 (9.1.0.134)
http://update.hicloud.com:8180/TDS/d...ull/update.zip do not change the name (update.zip es el correcto)
http://update.hicloud.com:8180/TDS/d...orange_all.zip change the name (update_data_public.zip)
HuRUpdater_0.4
https://mega.nz/#!EY8FDYaB!nMjllhR5k...jjJ1_NAj5DR_as
create the Dload folder, and copy the 3 Zip Files,
then, copy the Dload folder in your MicroSD
Start Recovery Team, Do not do any type of cleaning (wipe) and flash HuRUpdater_0.4.zip (Volume Down and the room is installed)
and the rest reads the tutorial friend XDD:bueno:
Click to expand...
Click to collapse
Can i do this in a anelx3?
Jckreon said:
Can i do this in a anelx3?
Click to expand...
Click to collapse
do not make him friend
I thought your model was Ane lx1
bryan.stelios said:
Update ANE-LX3
ANE-LX3C771E4R1P7B134 (9.1.0.134)
http://update.hicloud.com:8180/TDS/d...ull/update.zip
http://update.hicloud.com:8180/TDS/d...-L03_hw_la.zip (Change the name to update_data_public.zip)
HuRUpdater_0.4
https://mega.nz/#!EY8FDYaB!nMjllhR5k...jjJ1_NAj5DR_as
create the Dload folder, and copy the 3 Zip Files,
then, copy the Dload folder in your MicroSD
Start Recovery Team, Do not do any type of cleaning (wipe) and flash HuRUpdater_0.4.zip (Volume Down and the room is installed)
and the rest reads the tutorial friend XDD:bueno:
Click to expand...
Click to collapse
No mount steps are necessary with ane lx3 device with these files? Just at the end enter in erocovery and clean system?
Jckreon said:
No mount steps are necessary with ane lx3 device with these files? Just at the end enter in erocovery and clean system?
Click to expand...
Click to collapse
Mount everything before flashing! With Team recovery, and at the end of everything clean everything with the erecovery.

Categories

Resources