Related
hi i have xda1 with t-mobile
it only shows t-mobile and hangs there
it shows
t-mobile
4.01.19
which rom should i use and what is the method to write that rom
Thanx in advance
Normally you should see ROM Version (in you case 4.01.19) and also 2 other Version. But I´m sure, you do not see this numbers....
I think you have flashed the wrong radiostack to your device and now you have GSM Error when you enter the bootloader....
Try this instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
any thing else
i ve downloaded the same rom version on my phone but still it hangs at the startup with showing
3.17.03
with no radio versions and etc.
The phone was fell down from me and it started the problem from same time.
plz give me solution it is very urgent
You may have damaged some internal component when you dropped the phone. Are you pushing resetting the phone after flashing, by pushing once in the hole under the headset socket then wait one minute and push once more.
You are saying that you have ROM version 4.01.19
If I remember correctly that ROM version can only be unlocked using the SD card method. Is it possible that somebody tried to unlock it and screwed it up?
Either way it sounds like you need a new main board for it.
my phone is finally ok with some problems
i ve successfully made my mobile in working condition by some technical methods but i still have some problems with its software. from where i can get the exact radio stack for being used here in Pakistan. is it wants auto configuration but my operator and country is not listed in that menu.
3.17.03 ENG
6.24.00
324e4
which radio stack i must install and from where i can get it?
Thanks in advance to all members
hi
if someone want to know how i successfuly repaired it u can ask me
RE: my phone is finally ok with some problems
I just shipped an SX56 to a customer in Karachi, Pakistan and he is apparently happy with it.
It was upgraded with this file: sx56_WM2003_update.exe
G1.3.3
RA.33.02
A.30.09
RE: my phone is finally ok with some problems
Forgot to mention it, that file also upgrade the radio stack.
What abt my regional settings
Thanx but cud u plz tell me how can i get logon with my sim card coz my phone is not giving signals ? it wants some kind of customization process but my country's network is not listed in it
Thankx
After trying to upgrade radio stack to version 4.24.20
i just tried to upgrade my radio stack to above mentioned version. Now i m gettin an error message that says "cant upgrade rsu prss ok to restart" it comes again and again. rsu upgrading was done first time with no errors but soon after it,it start giving me that message and in the startup screen it shows the previous version of radio stack which was 6.24.00. Plz tell me what is wrong that i did and how to resolve that trouble?
Thanks
I am planning on purchasing an MDA Vario on T-Mobile UK, however I need to use it on Vodafone UK.
I want to unlock the phone with least risk of causing any problems, or bricks as I see it more commonly termed as in this forum.
Is there a simple tool which does SIM unlock and nothing more and is it safe ? I was thinking lokiwiz version 0.1 might do that ?
Will all the new MDA Vario come with the G4 chip ? or is luck of the draw.
Please please can someone shed some light.
surely someone has done this, please please help me
I have done a straight unlock and it went fine to qtek 9100 firmware...
But:
Email and other funtions didnt work properly
Phone crashed alot
Finally the back light failed.
So about 10 minutes ago i switched back to the T-Mobile firmware.
Now everything is working perfectly and the new OS looks very nice too.
below24,
straight unlock ? -- what tool did you use to unlock ?
new OS ? -- do u mean the latest offcial T-mobile ROM ?
appreciate your input
Yes the Latest T-Mobile ROM, its from their site.
Well i have to use a piece of sortware found here, to unlock the lock on the phone so i could first flash it and that also unlocked it.
Then immediately debranded it to the Qtek 9100 ROM, which made the Device run slower (than the T-mobile one)
Not sure what it was called though probably the lokiwiz version 0.1, that was the one. Very easy and straight forward...
G4 chip MDA Vario unlocked
Got my vario today locked to T-mobile UK. And yes it was a G4 chip.
IPP/SPL - 2.21.0001
OS - 2.24.2.6
I had no t-mobile SIM so stuck my vodafone SIM in, first asks for my personal SIM password, then it asks for unlock code.
At this point I ran lokiwiz03a, which ran but never gave me unlock code, mentioned something about not being able to copy some file and it might be in use.
So I copied EnableRapi.cab to my phone and ran EnableRapi.cab from File Explorer, that went fine (message about overwrite, said yes)
Then I ran LockiwizMsl.bat from desktop while being connected to ActiveSync and there it was the unlock code.
Entered worked fine.
As regards the ROM upgrade, my main reason was to lose all t-mobile crap, but found an easier way with ZERO risk:
First time ever you startup phone it does inital setup, the last step it beings to do an install, as soon as the install starts pull the battery out, then reboot. (Important to have the battery cover off already)
On reboot you should be able to go into the phone no setup screens this time, also ZERO customizations, yes means you need to do all the GPRS, MMS etc etc setting yourself, but that I am happy to do.
Hope this helps someone.
forgot main thing, used lokiwiz03a, thanks to machinagod.
Good, im glad i could have been of assistance.
good luck in the future with it.
but the pulling out of the battery im not too sure about... :shock:
I agree pulling battery out sounds crazy, I remember reading it in a forum, thought it would never work myself, since it was a new phone i could always return in 7 days, so thought what the hell, let me try it out.
Been running one day, and everything works fine, phone is fine, wi-fi working, bluetooth and GPS, so far so good.
Trying some tweak programs now
Loving my MDA, why did i not get one sooner.
Thats what i thought, the Vario is very good, but i still think its a little on the large side and not as fast as it can be... I am really waiting for the tytn.
I have found that the firmware from T-mobile is pretty stable and has a quicker startup than the qtek 9100 firmware. however this may not be the case with everyones mobile, just me!
Could you not just perform a soft reset instead of pulling the battery out?
soft reset - you mean when the install begins ?
really not sure, guess next person can try this out and let us know.
This tool is great, file transfer it to your MDA then just click on it, it will unlock your phone to all networks, I tried it on my MDA Vario with T-mobile for an o2 sim and it works great no issues, I can use GPRS, MMS, Call waiting etc
...yes, soft reset while device installs works (of course I made a full backup with SPB-backup first)...
straight forward unlock mda vario
I receiced this logfile while executing
xdadev_all_unlock started
device=WIZA200
could not find security key for device type WIZA200
xdadev_all_unlock failed
I guess mine is already unlocked, ain't it...
straight forward unlock mda vario
I receiced this logfile while executing:
xdadev_all_unlock started
device=WIZA200
could not find security key for device type WIZA200
xdadev_all_unlock failed
I guess mine is already unlocked, ain't it...
best way to tell is to put different provider sim in there and turn it on.
Hello
I just wanted to say HI. I just registered. Been exploring this site for some time now. I have the touch pro 2. I really like it. I have had a lot of phones, mostly iphones and blackberries (I used to sell them). Done a lot of unlocking, but now am getting into serious business
So just wanted to say Hi. Thanks for helping me get an education. I will say this information is very hard to navigate though. You guys are amazingly smart about this stuff.
So far I have the MightyROM. Trying to understand the different types of locks/locking. For the TP2. From Iphones I learned about basebands and firmwares. This TP2 is on a whole new level by comparison though. Very confusing. Trying to skim through the wiki. Information seems hard to come by. I have basic knowledge only pretty much, but it's all diverse (done light java programming, etc...)
Really interested in the Registry edit capabilities. Right now I just have Rescoe. I thought for sure there would be a way to unlock by going that route but doesn't seem to work on anything I have tried. Don't really understand the parameters/keys and don't know how exactly to find out.
I will just keep plugging away I guess. Tried to buy the security unlocker but ran into problems with paypal freezing my account and what not... I really hate paypal...
Thanks though. You guys do great things!
What is Security Unlock?
Ok hello again, I now have a very good question I think:
What is Security Unlocking?
I was reading the wiki and that clarified a lot of things for me as far as CID/ROM unlocking and SIM unlocking but I didn't see anything about security unlocking. I am under the impression that I need to security unlock but I don't know why and I would really like to know.
Last nite I tried to download and install the radio upgrades from Olipro but the phone bricked into bootloader and I had to reflash the mighty ROM to get it back up and running again. As my understanding is that I am currently CID/ROM unlocked but I can't seem to unlock the Radio/GSM without Security unlocking. Can please tell me why? Is this an added mechanism to prevent this that is recent advancement on the carriers part I am guessing but how does it work and why? Thanks so much if you tell me!!!
derekstaroba said:
Ok hello again, I now have a very good question I think:
What is Security Unlocking?
I was reading the wiki and that clarified a lot of things for me as far as CID/ROM unlocking and SIM unlocking but I didn't see anything about security unlocking. I am under the impression that I need to security unlock but I don't know why and I would really like to know.
Last nite I tried to download and install the radio upgrades from Olipro but the phone bricked into bootloader and I had to reflash the mighty ROM to get it back up and running again. As my understanding is that I am currently CID/ROM unlocked but I can't seem to unlock the Radio/GSM without Security unlocking. Can please tell me why? Is this an added mechanism to prevent this that is recent advancement on the carriers part I am guessing but how does it work and why? Thanks so much if you tell me!!!
Click to expand...
Click to collapse
what do you mean by trying to unlock the radio? SIM unlock?
security unlock allows flashing non-stock radios. (but you must pay attention if you're flashing a radio that's compatible with your phone model.)
cmonex said:
what do you mean by trying to unlock the radio? SIM unlock?
security unlock allows flashing non-stock radios. (but you must pay attention if you're flashing a radio that's compatible with your phone model.)
Click to expand...
Click to collapse
Well I'm not quite sure but I will explain what I am seeing.
When I put a SIM in the network doesn't register but it shows the new phone number in phone settings on the first tab. On the second tab in 'Network' it doesn't detect and keeps saying "searching for network" etc...
My radio says WF. the hhspl works fine and I can flash any ROM. The only ROM I haven't tried is a GSM ROM because in my understanding that bricks the phone (What is the brick? Tricolor? Black screen?). However I haven't been able to flash any Radio's at all. It gets to 100% and then quits with an error and reverts the phone to tricolor screen and the only way to get it out is to Reflash a ROM. I was able to Flash a Sprint ROM with the windows mobile 6.1 version. I have to say that one really sucks lol but it did manage to change the radio version. After I changed the Radio Version to 1.96WF I reflashed back to MightyROM and tried to run the unlocker again, didn't work. Then I tried to reflash another radio. Didn't work and bricked the phone to tricolor/bootloader again.
So am I CID locked Or Security locked? Either way the process should work I thought? None of the programs seem to be doing what they are fully designed to do.
Thnx a bunch!
Something!
I purchased a brand new T-Mobile SIM and IT REGISTERED!
I was able to call the T-Mobile Help line.
There was some trouble with the activation, but I think I got it. I guess I didn't need the security unlock after all???
weird. And the radio version is sprint. In my understanding, a sprint baseband/radio is not supported on T-mobile, yet I have access to the frequencies/bands. For example on an iphone in order to pick up frequencies from T-mobile or any other GSM carrier you have to upgrade the baseband/radio version to one that supports those frequencies. The last iphone I had I had to use an IPAD baseband in order to unlock it. So this is completely different.
THIS MAKES ME VERY VERY CURIOUS!
Yea the security unlocker doesn't work for the U.S. Cell version... at least mine it doesn't. I made some youtube videos and a thread to show that. I figured out another way to unlock though using the HardSPL, Flashing to a Sprint Stock ROM to get that radio, and then flashing again to MightyROM.
What I meant by unlocking the radio is basically I am thinking of the radio in terms of the radio picks up certain signals (like 800mhz, 850mhz, 1900mhz, etc...) but each carrier prevents their radios from picking up all but one of the signal, the one they use, and prevents the rest from communicating with the device (guessing this would be the device modem?) so when I say "unlock Radio" I was meaning unlock those other frequencies and get rid of the programming which blocks them and use my device to full capability.
So now I get to see what this baby can really do thanks
derekstaroba said:
Well I'm not quite sure but I will explain what I am seeing.
When I put a SIM in the network doesn't register but it shows the new phone number in phone settings on the first tab. On the second tab in 'Network' it doesn't detect and keeps saying "searching for network" etc...
My radio says WF. the hhspl works fine and I can flash any ROM. The only ROM I haven't tried is a GSM ROM because in my understanding that bricks the phone (What is the brick? Tricolor? Black screen?). However I haven't been able to flash any Radio's at all. It gets to 100% and then quits with an error and reverts the phone to tricolor screen and the only way to get it out is to Reflash a ROM. I was able to Flash a Sprint ROM with the windows mobile 6.1 version. I have to say that one really sucks lol but it did manage to change the radio version. After I changed the Radio Version to 1.96WF I reflashed back to MightyROM and tried to run the unlocker again, didn't work. Then I tried to reflash another radio. Didn't work and bricked the phone to tricolor/bootloader again.
So am I CID locked Or Security locked? Either way the process should work I thought? None of the programs seem to be doing what they are fully designed to do.
Thnx a bunch!
Click to expand...
Click to collapse
if you only flashed Hard-SPL, then you are still security locked in terms of radio.
Hard-SPL is only designed to unlock the SPL, not the radio. so, it does do what it was designed to do, unlocks your phone for normal ROM flashing.
derekstaroba said:
Yea the security unlocker doesn't work for the U.S. Cell version... at least mine it doesn't. I made some youtube videos and a thread to show that. I figured out another way to unlock though using the HardSPL, Flashing to a Sprint Stock ROM to get that radio, and then flashing again to MightyROM.
What I meant by unlocking the radio is basically I am thinking of the radio in terms of the radio picks up certain signals (like 800mhz, 850mhz, 1900mhz, etc...) but each carrier prevents their radios from picking up all but one of the signal, the one they use, and prevents the rest from communicating with the device (guessing this would be the device modem?) so when I say "unlock Radio" I was meaning unlock those other frequencies and get rid of the programming which blocks them and use my device to full capability.
So now I get to see what this baby can really do thanks
Click to expand...
Click to collapse
both Hard-SPL and our sim/security unlocker (separate program from Hard-SPL) work for US cellular tp2.
as for the Tmobile SIM, some of the newer SIM cards will work with that sprint radio. not all of these SIM cards will.
Dear All
first of all, sorry for my bad language.
my problem started when i purchased an used Inc2 from swappa, i am expert in flashing ROMs for HTC phones.
when i got the phone, i s-off, installed recovery and installed custom ROM supports GSM, as i am living outside USA, and everything was good (GSM and data)
one day, suddenly the phone was not able to get a H data, only E, so i decided to factory reset to solve the problem, i return to stock ROM using RUU, then when i turn it on for the first time i discovered that its still connected to verizon Network and gave me a roaming signal, i know nothing about verizon network or how to disconnect my phone from their service.
don't tell me to contact the original owner, because i purchased this phone more than one year ago and i totally forgot from whom i toke it.
THE MAIN PROBLEM NOW, every time i insert my local SIM, the phone switch from roaming mode (CMDA) to global mode (GSM), which is OK, but when i receive or make a call, it restarts automatically !!!!
i had tried all the ROM, RUU, radios in the development section, with no hope, so, i think the problem is occur from the conflict between CMDA signal an GSM signal!!!???!! or something else, so i guess the first thing i have to do is disconnect the verizon service, BUT HOW?? somebody please help me
any thoughts folks?
Can you post your phone's settings, mainly the ones under "About Phone" including kernel, mobile network type, service state & software information, etc.?
With a local Sim card, it is possible that you device would boot up & switch to Global Mode (by default) with preference for CDMA, but you should be able to manually change it & semi-lock it to GSM only? What happens when you tried that?
There is a # of GSM only Rom that you can flash, assuming you've rooted it again & maintained S-Off with a custom recovery re-installed - and, that it was properly Sim unlocked.
Im on GSM with chilly's beanstalk 1.30 (4.2.2) and I have no problems, check if a wipe with antivenomSDW, helps.
Sent from my ADR6350 using xda app-developers app
Hi all, I've been battling this problem for days now. Airplanr mode is stuck 'Turning off...' and wont connect to my mobile carrier. Things I've tried:
Restarting phone with and without SIM inserted
Factory reset from settings
Factory reset from recovery mode
Flashed to the same build twice using the flash from SD card method (build 3.36.709.3)
Turned airplane mode on and off with wifi/mobile data/NFC turned on or off
I have no idea what to do next. I doubt it's a hardware problem as the phone detects the sim card when I put it in and asks if it's O2 pay and go or pay monthly, so it can even read it, it's just the phone wont come out of airplane mode.
I am on holiday without a PC but feel free to post ideas that requires one. Device is currently S-on and unrooted. I would rather not root or s-off the device just yet, and would rather stay on stock ROM as it's still in warranty. Problem is, it's in the UK and the warranty is held in Taiwan, which means sending it internationally to get it fixed. It's also a problem as there is a language barrier between me and their support for phone calls and their live chat button appears to always be greyed out.
Edit: I found this for the M8 which I think is in the right direction:
"Even I started thinking same way but it wasn't hardware issue.
I used ##786# to reset the phone completly (it did asked me my MSL/SPC) and everything was wiped from the phone. ( I am sure this reset is different from normal factory reset)
now my phone is up and I can toggle Airplane Mode On & Off however now there is another thing which I came accross
1. No roaming option or extended options in "Mobile Data" option under Wireless & Settings
2. No Network Sharing option
Even tried after running RUU_M8_WHL_K44_SENSE60_SPCS_MR_Sprint_WWE_Harman_2 .16.654.4_R2_Radio_1.08.20.0612_4_NV_SPCS_1.52_003 _release_384670_signed_2"
How do I do this with the M9? aLogcat comes back with no MSL so I need a free unrooted way to get that, and that # code doesn't do anything on the M9 either!
Edit2: Tried*#*#4636#*#*
Option is there to turn on the radio, but pressing it does nothing. Changing preffered network type does nothing either (I select any option from the drop down and the original choice remains). SIM is with O2. Currently set to GSM/WCDMA/LTE
Please help -_-
damn you really tried an m8 RUU on M9? please don't be stupid! it will never work lol. is your phone unlocked, so you could flash twrp recovery? otherwise you need to find a RUU matching your mainversion/CID. but this time not from m8 lol
DeeZZ_NuuZZ said:
damn you really tried an m8 RUU on M9? please don't be stupid! it will never work lol. is your phone unlocked, so you could flash twrp recovery? otherwise you need to find a RUU matching your mainversion/CID. but this time not from m8 lol
Click to expand...
Click to collapse
The M8 RUU was a quote from someone having the same issue on their M8. Sorry if that wasn't very clear. I am running a fresh M9 latest RUU, I'm not dumb enough to put an M8 RUU on it and the stock flash utility (download mode) isn't either.
I still haven't found a solution to this. Can anyone help?
tried in *#*#4636#*#* on the menu button the frequency option? if you are fully stock, ask HTC, if they have no other fix, send it for warranty
I've tried everything in that screen. Here is what I have also tried today:
Bootloader unlocked
Custom recovery installed
Rooted
Model number and CID changed to developer model
Developer rom installed (android lollipop) same problem
Latest developer edition firmware installed
ViperOne 4.3 installed, same problem
Cryno... Something... I forget the name, but another custom rom installed, same problem.
It's fair to say that the problem is probably hardware related. The SIM card is detected, but the radio willnot turn on. In this instance, what is the most likely hardware cause? Is it worth replacing the sim card reader or is it more likely to be a chipset issue? I would be happier replacing the sim reader if the sim was not detected at all.
Btw, all the custom software stuff was done because HTC Taiwan said they wouldn't touch it. According to them it's out of warranty even though UK support say it's in warranty with the taiwan support centre.