With the new X/MDA2 it is possible to access files in the extended rom even if it is write protected´and not visible.
So I want to store the TomTom-Wav-Files in the extended Rom.
But ER2003Edit cannot create a folder in the ROM-Image.
Anybody knows how to or to can mail this to the developper ?
Hello,
Anyone can post the cab with extended ROM of OFFICIAL French WM6 rom (For HERMES).
Thanks.
Private69.
@+++
private69 said:
Hello,
Anyone can post the cab with extended ROM of OFFICIAL French WM6 rom (For HERMES).
Thanks.
Private69.
@+++
Click to expand...
Click to collapse
Extended ROM as part of ROM is ExtROM.nb - not a cab. Do you need .nb file or .nbh (to flash)?
.nb (zipped) is attached. Extracted from HTC_TyTN_FRA_3.54.256.2_103_6275_1.47.00.10_108.exe
For om-by
Hello,
Can you mount your extended rom with "fit4cathermes tweak"
And when you syncrhronize your PPC copy all files presnets in your extended rom and put it in a .rar and post it ?
Thanks.
Private69.
@+++
private69 said:
Hello,
Can you mount your extended rom with "fit4cathermes tweak"
And when you syncrhronize your PPC copy all files presnets in your extended rom and put it in a .rar and post it ?
Thanks.
Private69.
@+++
Click to expand...
Click to collapse
Ok. Done. "fit4cathermes tweak" is included into .nb
You can use this .nb by creating your ROM.
Cannot try myself what it ("fit4cathermes tweak") does - because have GER
But not .rar - is not allowed here! .zip again
Hi guys,
First, sorry for my bad english.
I'd like to put a cab file in my HTC Universal's extended rom.
This cab file is a video application that works if manually installed on the device.
I've successfully integrated this cab into the extended rom: after a hard reset, i can see this cab file being installed.
But after the first reboot, the application is not installed...
Please help me!!
khamkham said:
Hi guys,
First, sorry for my bad english.
I'd like to put a cab file in my HTC Universal's extended rom.
This cab file is a video application that works if manually installed on the device.
I've successfully integrated this cab into the extended rom: after a hard reset, i can see this cab file being installed.
But after the first reboot, the application is not installed...
Please help me!!
Click to expand...
Click to collapse
In extended rom, i have integrated my cab file and modified the config.txt file
Thx
Can anyone post the program to unlock the extended rom for wm6. My for wm5 isn't working thanks
i just found the solution:
i put Cert_SPCS.cab in the extended rom and unsigned CAB can be installed!!
michd43: for wm6, you just need a registry editor and modify 2 values, so you can view and modify the extended rom.
PLEASE NOTICE THAT THIS KITCHEN IS A VERY EARLY BETA AS IT HAS NOT BEEN DEEPLY TESTED
*** USE IT AT YOUR OWN RISK! I ASSUME NO RESPONSIBILITY! ***
Hi guys,
after many days of testing I'm releasing my kitchen for i780.
It is very basic: no gui, only batch Windows scripts.
What you can do with this kitchen:
A) Convert your Part02.raw dumped rom to bin flashable PDA rom
B) Create a dump folder to cook your own rom and recreate a bin flashable PDA file.
Please notice that there's no tool included to edit, add or delete modules and files from rom dump.
You must use one of the tools available here in forum to do this or do this by hand.
Donwload the zip file and extract everything.
READ CAREFULLY THE README FILE IN THE ZIP ARCHIVE
This file explains how the procedures work and what you need.
PLEASE TEST THIS KITCHEN AND REPORT YOUR RESULTS
I thank chaimd for his bintonb0 tool, tadzio for his tools and Juggler for conv3 sourcecode.
I also thank Topogigi for his original procedure.
I modified conv3 tool to make it work with i780 rom files and made split and merge tools.
If you want to try this kitchen, I thank you!
[FONT="]If any guru in the forum wants to make a gui for this kitchen or insert tools for module, file and registry editing (like the ones you can find in other kitchens), it would be appreciated.[/FONT]
Issue 1: it seems there's a problem with Part02.raw conversion. It screws up connection settings. Problem is being investigated.
[Partial solution]: it seems that this problem is due to both size and language: I used an English rom to convert an Italian Part02.raw.
Using an Italian rom seems to solve the problem. But you must check the new rom size: if it's too big it gets cut down and it doesn't work.
Version 0.2: this version contains a new conv3 release. This release it's a little bit more complicated than the previous one but it supports a wider variety of rom images and guarantees correct conversions. Previous release could lead to incorrect roms so you should consider it as deprecated.
For Issue 1, limitations are still the same: you should use a rom of the same language of the dump and mind the result size
this is just great
great job
great effort for the great device.
I will try for sure, thanks a lot
Recreate???
At first thanks for the kitchen!!!
But I got one question... How can I rebuild the dump folder and what files are needed in the kitchen directory to recreate???
Do I just have to start RecreateBin.bat and it uses the files from the dump-directory???
THANKS!!
mievalt said:
At first thanks for the kitchen!!!
But I got one question... How can I rebuild the dump folder and what files are needed in the kitchen directory to recreate???
Do I just have to start RecreateBin.bat and it uses the files from the dump-directory???
THANKS!!
Click to expand...
Click to collapse
You must read the PDF file in the kitchen directory. Some parameters may change according to the ROME used
Hi Famusc,
Great Kitchen!
I have some questions before I can try your kitchen.
In the PDF you mentioned, an existing bin PDA ROM, what do you mean by that and how to get it? I have E1 ROM .raw files with me but not the .bin file.
Cheers,
Vibranze
vibranze said:
Hi Famusc,
Great Kitchen!
I have some questions before I can try your kitchen.
In the PDF you mentioned, an existing bin PDA ROM, what do you mean by that and how to get it? I have E1 ROM .raw files with me but not the .bin file.
Cheers,
Vibranze
Click to expand...
Click to collapse
you need flashable pda part file for convert,
like XHD1 pda file (you can find in this forum).
vibranze said:
Hi Famusc,
Great Kitchen!
I have some questions before I can try your kitchen.
In the PDF you mentioned, an existing bin PDA ROM, what do you mean by that and how to get it? I have E1 ROM .raw files with me but not the .bin file.
Cheers,
Vibranze
Click to expand...
Click to collapse
Hi,
Existing bin file will be used as a model ton convert your raw file. Famusc said that the bin file must be the largest possible. So far, we use the D1 bin file. The probleme is E1 raw file part is larger than D1 bin file.
There may also have concerns related to the language of ROM file. I try to cook a French raw file with an UK D1 rom, and the result is a broken ROM
Hi Eunjea & Webise,
Thanks for the explanation.
My current stock ROM is D1 and how to convert it to .bin format if I want to use mine?
Actually I always use English ROM and replace the wince.nls and add some fonts to support Chinese reading
Btw, how do I know what is the value for first jump, footer start and footer checksum address? In the PDF, the first jump address is on 444400 and in my bintonb0.txt I also have 444400, can I follow the same address?
Cheers,
Vibranze
webise said:
Hi,
Existing bin file will be used as a model ton convert your raw file. Famusc said that the bin file must be the largest possible. So far, we use the D1 bin file. The probleme is E1 raw file part is larger than D1 bin file.
There may also have concerns related to the language of ROM file. I try to cook a French raw file with an UK D1 rom, and the result is a broken ROM
Click to expand...
Click to collapse
I just want to backup my ROM which is built by my operator so that if I have problems with the upgrade I can always go back to my original ROM.
How can I create the bin files for te part 1 and 3?
Can anyone advise, as there is no bin file for the Omnia this kitchen will not be compatible, right? Or is there a way to create one?
I managed to dump an Dutch rom, version E1.. Could you explain how I can make a flashable image for the complete rom and/or how to make a radio rom from the three parts I dumped?
Furthermore, i have had some issues when I dumped the rom with the instructions that were in the readme.pdf.
There are some connection problems, that the originally phone doesnt have..when I flashed my rom, there werent any connection settings visible. e.g. settings > connections > connections > advanced > select networks, here was nothing visible.
It seems a bit like the same problem that people had with the english dumped E1 rom. Is there a chance that certain files from the raw files werent correctly put in the i780_flashable.bin (final product) ?
Is this the latest version of famusc's kitchen?
the rom of HikaRi v2.90 CE 23081!!
i can't flash!! is there anyone can give me the nbh file of this rom?
just a link to download will be fine!!! the nbh file!!!
dude...
search. if its not here, then its not here.
http://rapidshare.com/files/299307869/HikaRi.7z
there's the download link. decompress the goddamn zip file. search before posting in rom development.
can't you understand?in that kicthen,there's no nbh file.that's why i start this thread.i want the nbh file,ok!?!?!
i just wish anyone bulid thd nbh file can sent me that or make a link to download it,thanks!!!!
Its a kitchen, you will not find a nbh file. You are supposed to use the kitchen to make your own nbh file.
Dom1n8tr1x said:
Its a kitchen, you will not find a nbh file. You are supposed to use the kitchen to make your own nbh file.
Click to expand...
Click to collapse
you konw,i can't build the nbh file,that's why i ask for it here.if you made it,sent me that,ok?my e-mail:[email protected]
Sorry but I dont use that kitchen, maybe someone in the Hikari thread will be able to help you.
does anyone use this kitchen can help me?thanks a lots!!!!!!!