One of the things I had issues with when I converted and hacked up the Audiovox SMT5600 over from AT&T Wireless to Cingular was the infamous "05" SMS notification whenever I got a voicemail and when I listened to and deleted them.
Now, thanks to MadMonkeyBoy, I am the proud owner of a PDA2K, and it's a joy to say in the very least.
However, the moment I boot up the PDA2K, it prompts me with a voicemail notification icon on the top status bar, regardless if I have one or not.
Furthermore, when I get a real voicemail, I get the 05 notification again, and I receive another one when I listen to them and delete it.
What's going wrong here? I was told by everyone that no one has issues with the PDA2K on Cingular's network, and while I fully believe them and don't blame them, I'm just pretty confused as to why I'm getting them. I have the latest firmware, and I even took the extra steps of unlocking the Extended ROM and grabbing some of the Cingular customizations from here.
Please help soon! Thanks!
BeyondtheTech said:
One of the things I had issues with when I converted and hacked up the Audiovox SMT5600 over from AT&T Wireless to Cingular was the infamous "05" SMS notification whenever I got a voicemail and when I listened to and deleted them.
Now, thanks to MadMonkeyBoy, I am the proud owner of a PDA2K, and it's a joy to say in the very least.
However, the moment I boot up the PDA2K, it prompts me with a voicemail notification icon on the top status bar, regardless if I have one or not.
Furthermore, when I get a real voicemail, I get the 05 notification again, and I receive another one when I listen to them and delete it.
What's going wrong here? I was told by everyone that no one has issues with the PDA2K on Cingular's network, and while I fully believe them and don't blame them, I'm just pretty confused as to why I'm getting them. I have the latest firmware, and I even took the extra steps of unlocking the Extended ROM and grabbing some of the Cingular customizations from here.
Please help soon! Thanks!
Click to expand...
Click to collapse
I had that same problem just yeaterday on my PDA2K- Never had it before Cingular took over AT&T.... MUST be on thier end.... I cannot get rid of the Voicemail Icon even I have NO Voicemails
FYI, No such problem with my 5600 or PDA2k on Cingular here in Sacramento, CA.
The only service related problem I see is the periodic inability to make or receive calls when "roaming" on an AT&T Wireless tower. It usually corrects itself after a few tries. Once or twice I resorted to turning on/off flight mode and that corrected it. I think it is an issue with the integration of AT&T Wireless RAN and Cingular's core and expect it to improve with time.
Do you have a 32K SIM or 64K SIM? Just curious.
I have a 64K SIM that I received from a Blue store in Woodbridge, NJ. For gits and shiggles, I'm going to see if a later ROM might do the trick, but I was told that SIM replacement is likely. Any insight?
I installed the latest Arabic version of the ROM upgrade, bringing the upgrade to:
ROM version: 1.31.00 WWE
ROM date: 12/13/04
Radio version: 1.06.00
Protocol version: 1337.38
ExtROM version: 1.31.112 WWE
I then unlocked the Extended ROM and removed all the Arabic customizations and applied some of the Cingular customizations.
Unfortunately, the voicemail icon still came up and it was looking bleek. Until I stopped by another Blue store and exchanged the 64K SIM... voila! The initial voicemail notification icon was gone! Now, I'll just have to have someone leave me a voice message to see how the PDA2K responds.
Same problem here
Hi,
I was using my PDA2K fine with AT&T but upgraded my account to Cingular. They sent me a new SIM card and now I get the same "05" text messages. Has anyone figured out what is causing this and how to remedy it? Could it really be that I too have a broken SIM card?
Thanks
I'm convinces it's the SIM and the way it talks to the network. I called Cingular and of course, they're blaming the software or firmware on the device, but I have yet to find a TRUE Cingular customer (read: Orange store, not from Blue store [converted AT&T-to-Cingular]) and borrow his/her SIM to check it out.
Related
Heya folks,
I wasn't too sure what to even look for in a search for this one.
I'm moving to the US, I have an Orange M2000. I've been offered a work-cellphone account, but I have to pay for the cellphone myself.
As I already have the M2000, I'd like to use it on Cingular for "Goodlink" services.
Apart from unlocking the network-lock to take the Cingular sim, is there anything else I need to do to prepare the phone? I'd rather not tamper with Rom's etc unless I have to.
thanks again
Rochey
Hello, i was in the same situation last year with my XDA IIs. Moved from London. I have been using it on T-Mob US with no problems at all with regards to call reception, gprs, or sending and receiving sms. Only thing you may want to do is upgrade your radio rom to 1.15, seems to enhance reception a bit. Cheers.
Head over to the SX66 Standardization Project website & grab an extended ROM. Extended ROMs contain operator customization files -- grab them from the extended ROM & install them on your BA.
To efjay
efjay said:
Hello, i was in the same situation last year with my XDA IIs. Moved from London. I have been using it on T-Mob US with no problems at all with regards to call reception, gprs, or sending and receiving sms. Only thing you may want to do is upgrade your radio rom to 1.15, seems to enhance reception a bit. Cheers.
Click to expand...
Click to collapse
Hi there, I live in California and bought an Orancge SPV M2000 off Ebay from the UK, have unlocked it and it works well with my T-mobile simcard. But since it came loaded with the original Orange ROMS...I have had no luck trying to configure the MMS/GPRS settings on it. Tried every configuration found here on this site as well as other google sites, and even called Tmobile customer care rep for a walk-through. They didn't tell me anything new from what I've already found here, however, no joy sending an MMS at all
I have considered upgrading my extROM from Xelencins Tmobile for WIZARD ROM just to get the Customization settings. But I'd rather not do that since I am no pro at upgrading and don't wanna screw up my device if I can help it.
Can you tell me how you configured your MMS?GPRS settings to seamlessly work ? Mine just says "sending" forever and then times out and never sends it in the end
Please, any tips will do, thanks in advance...
Loids
Hi there
Bored of scrolling through massive threads, maybe it's time we separate some of the issues now. Starting with...
Voicemail indicators not working correctly in WM6.
So, what are your experiences? If yours work, let us know, if not, post what happens.
I'm on Orange UK and I get an SMS from '[email protected]' and '^@' to activate/deactivate the indicator respectively.
I've been googling, and haven't found much about these messages. I think they're supposed to be Class 0 but not sure. Does anyone know which part of the OS is in charge of sorting them out and interpreting them?
Maybe this is a simple reg setting that's missing? Could someone with WM5 and on an operator using vmail notifications run a search through their registry for '[email protected]' and '^@'?
Cheers
joehood said:
Hi there
Bored of scrolling through massive threads, maybe it's time we separate some of the issues now. Starting with...
Voicemail indicators not working correctly in WM6.
So, what are your experiences? If yours work, let us know, if not, post what happens.
I'm on Orange UK and I get an SMS from '[email protected]' and '^@' to activate/deactivate the indicator respectively.
I've been googling, and haven't found much about these messages. I think they're supposed to be Class 0 but not sure. Does anyone know which part of the OS is in charge of sorting them out and interpreting them?
Maybe this is a simple reg setting that's missing? Could someone with WM5 and on an operator using vmail notifications run a search through their registry for '[email protected]' and '^@'?
Cheers
Click to expand...
Click to collapse
I get a different character, for deactivate - its a full size triangle. Again, on Orange UK.
I'll try and run thru installing all the WM5 orange cabs to test on Sun - I've got our Wedding celebration party tommorow! I'll get my ass kicked if I go near it before then.......
Congratulations!
Yeah I get the same full triangle, sorry. I've seen it abbreviated to ^ on a couple of other forums so used that, but it is actually a complete triangle.(Alpha symbol?)
joehood said:
Hi there
Bored of scrolling through massive threads, maybe it's time we separate some of the issues now. Starting with...
Voicemail indicators not working correctly in WM6.
So, what are your experiences? If yours work, let us know, if not, post what happens.
I'm on Orange UK and I get an SMS from '[email protected]' and '^@' to activate/deactivate the indicator respectively.
I've been googling, and haven't found much about these messages. I think they're supposed to be Class 0 but not sure. Does anyone know which part of the OS is in charge of sorting them out and interpreting them?
Maybe this is a simple reg setting that's missing? Could someone with WM5 and on an operator using vmail notifications run a search through their registry for '[email protected]' and '^@'?
Cheers
Click to expand...
Click to collapse
Yep, I have exactly the same problem with the XDA-Live 0.1 ROM. Using Orange UK.
Couldn't delete the second message. I kept getting a message about the a SIM error. Reboot of the phone and the message had gone.
Anyone worked out a fix?
No Voice Mail
Hi all,
I have the same issue with Orange UK as the rest of you. I am supprised that no one has a solution yet. Will keep an eye on this post for a fix !
I cant spend any time on this at the moment.
Setting [HKEY_CURRENT_USER\System\State\Messages\vmail\Line1\Unread]
"Count"=dword:00000000
clears the notification..
Also once in this state I dont get the initial text, but I do get the vm icon! Something keeps setting the count value to -1 which seems to get it messed up.
Cant find out what processes the notification, but it looks like its something in the base of wm5 as non of the ext rom programs seem to have any effect.
I have no problems with new voice mail indicators, missed call, new sms notifications, etc. All show up correctly. Using Cingular/AT&T..
Maybe the issue is only orange based on the previous comments???
Thanks eagle 1.
If anyone has voicemail notifications working on Orange in WM6 please post, as I'll know I'm doing something wrong.
I've tried all the customisation cabs and nothing's worked so far.
The problem is that the current WM6 rom does not support CPHS this is a set of commands that include the MWI (Message Waiting Indicator), Orange are the only provider in the UL using this feature. I feel the issue is that the bases ROM currently being used by the chef is not a final RTM of WM6 as it is missing a few features that the RTM should have. I used to have the issue when upgrading Nokia roms but with those it was a simple fix through LogoManager.
For more info on CPHS see http://www.phonescoop.com/glossary/term.php?gid=220
Thanks, that's great that we have an answer now to why it doesn't work. I guess the obvious thing to do is just wait until the final ROM's released, unless anyone with a bit more knorr-how knows of a way to add CPHS features to WM6...
Can someone try this workaround.....
http://www.miousers.co.uk/viewtopic.php?t=144&highlight=dialmonitored
Just dropping by, I'm flat out at work, cant spend any time on this at the moment, but stumbled over the above...This allows the device to clear the count as soon as you dial your VM, not pretty, but a temp fix...(assuming it works!)
(also found this on msdn..... http://msdn2.microsoft.com/en-us/library/aa457989.aspx)
and perhaps even editing CEMAIL.VOL may be another route....
This isn't a problem with all versions of WM6.
As well as a SPV M3100 (Hermes) I also have a SPVM5000 (Universal) also on Orange and the notifications work perfectly on the Universal.
SPV M3100 - XDA Live 0.10
SPV M5000 - Midget 0.1
I'll try to compare registry settings see if I can spot anything obvious
One thought as to the VoiceMail indicator and differences between Universal & Hermes versions of WM6.
I was wondering if this is something that is dependant on the radio rom.
I am using the Orange radio rom on my Universal but as far as the Hermes is concerned I've left it with the 1.16.00.00 rom which I think was from prof's SIM & CID unlocker v2a
Interesting...
That could be it. Frustratingly, I updated my radio ROM at the same time as installing WM6 so I can't isolate the problem. I'm using the 1.35 radio ROM that's on the FTP. I suppose this could be where orange make their voicemail customisations.
Is anyone running an Orange radio ROM with WM6? Can you please post your success with voicemail notifications?
I am on WMXL 0.2 and left my radio on the original orange radio of 1.06.00
Since upgrading to WMXL 0.1 and 0.2 I have NOT had the spool icon - but have received the system sms's. So I don't think its radio dependant.
I haven't however run any of the orange ext rom cabs as one or more of them made my wmxl 0.1 unstable - whereas loading wmxl 0.2 and then manually entering data connections etc has given me a fast stable device (without voicemail spool icon!).
Bump......
Anyone had any luck with this yet?
Taz69 said:
This isn't a problem with all versions of WM6.
As well as a SPV M3100 (Hermes) I also have a SPVM5000 (Universal) also on Orange and the notifications work perfectly on the Universal.
SPV M3100 - XDA Live 0.10
SPV M5000 - Midget 0.1
I'll try to compare registry settings see if I can spot anything obvious
Click to expand...
Click to collapse
Could you post or PM me the 'sms_providers.dll' file from the windows directory on your SPVM5000 so I can compare it to the one on the M3100 - I think this may be where the problem lies
Looks like it is down to the version of sms_providers.dll as also reported here.
http://forum.xda-developers.com/showthread.php?t=299072&page=2
I'll post the file from the SPV M5000 rom if still needed(They are of different size) but it will be after the weekend when I'm back home.
See post #16 from olipro on this thread, all sorted now and working perfectly.
http://forum.xda-developers.com/showthread.php?t=299072&page=2
You do need the developer certs installed to use the fix though (link in the thread) and you may have to rename the new dll and do some registry editing - all the info you need is in the linked thread.
The problem is one of the most annoying ones you can have: it appears only from time to time and you don't know when and even when it does you don't notice.
Simply my phone is not accessible for others even it shows full range and so on. The message "...the phone is switched off...". This problem occurs in as far as I remember 3 releases of ROMS (full, vanillas, etc). The radio ROM was also changed. I don't remember having such issue in early WM6 or in original 2005.
Since it's not related directly to any of the releases I post it as a new thread.
Now I have 3 options:
1. Downgrade to 2005
2. Throw the unit through the window, wait until end of contract and buy an iPhone
3. Try to fight with T-Mobile UK - which is not really an option since I just recovered from fighting with Orange for over a month
Does any of you experienced such problem?
Any known issues with downgrading to 2005 like ISPL required before flashing original ROM?
Any suggestions?
Adigital said:
...
Any known issues with downgrading to 2005 like ISPL required before flashing original ROM?
..
Click to expand...
Click to collapse
Well, I got the answer - couldn't wait and did the downgrade using original ROM. If anyone interested it went without problems. No ISPL needed. Connected, fired-up the exe file and worked OK.
I'll see how about the availability problem.
Ok, seems that it's only me having the conversation ;o)
I apologize for the thread location - it doesn't seem to be related strictly to WM6 anymore as I...
...installed WM5 and did some tests:
(I have voice mail switched off)
- Call waiting enabled = no calls allowed when GPRS active
- Call waiting disabled = no calls when transferring data (large file) but received when no transfer
- Used W660i SonyEricsson handset - could receive calls regardless of GPRS activity
Rang T-Mobile tech support where they told me that this is network feature that when internet connection is active no calls are allowed and since my voicemail is turned off all callers get message that my phone is switched off. In the light of GPRS specification and my tests this is a bull****.
Now I'm asking anyone on UK T-Mobile Web'n'Walk and who wants to help - please do such test. Just try to call your number from different phone when opening a web-page.
This is pretty important to me - I need internet on the move and don't want to get rid of my MDA.
Thanks in advance!
Hi there,
I'm on T-Mobile UK too and I ran some tests myself and found that you are absolutely correct. When you transfer data you cannot receive phone calls.
I've got an O2 device with me I can do some more tests on and I'll also try and borrow my Wife's Samsung and test that too. I'll post my findings here.
Cheers
Alex
ok, i've just tested this on an O2 3G device and there was no problem, next to try a none windows mobile t-mobile phone.
seems this problem has been around for while and on other networks.
http://www.freenfo.net/mobile/archive/index-t-64022.html
ok, final test and conclusion.
I tested the same o2 phone as above but in a NON 3g area (i.e. gprs only) and found the exact same issue.
conclusion: this seems to affect all types of phone and multiple networks but only when using gprs NOT 3g.
I'm suprised we havent heard more about this problem.
cheers
Alex
Thank you Alex very much for your help.
I did some research on the topic last night and found the same info as guys in the thread your linked. It must be that T-Mobile UK operates in NOM-2, which allows to suspend GPRS session only when no data is transferred. When packets are transmitted the device doesn't 'see' incoming calls as it's 'busy' with dealing with the packets. NOM-1 is 'able' to encapsulate information about incoming call into one of the packets and the device is notified about - so it can react, suspend the transmission and pick up the call.
The fact is that our MDA/Artemis uses Class B of GPRS which doesn't allow simultaneous CDA/GPRS at the same time. Even if it can suspend active data transfer it is the network that has to support that feature.
What I must notice is that I had lot more problems wiht this when I was using WM6. It seems that there were some packets transmitted by the system or something. I had my mail set to check servers every 15 mins at the beginning but lately ony once an hour or two. Other soft that could transmit anything was Weather module from SPB or Touch. Now when I'm on WM5 and was checking the issue during loading a page I was unavailable but as soon as a page was completely loaded my phone was accessible back.
My surprise is that if the 'issue' seems to be quite normal and there is nothing to do about it why I couldn't find any info about it here. Doesn't it affect anyone of our community?
I may be wrong with the WM6 expirience but still. If WM6 works fine in that respect it must have happened that someone missed a call when browsing the net.
i hadnt noticed to be honest
mugglesquop said:
i hadnt noticed to be honest
Click to expand...
Click to collapse
Did you try ringing your phone when it was loading a long page or downloading a file?
TBH I think I've noticed it just as much on WM6 as I did (or didn't) on WM5, I think I put these odd voice mails turning up down to weird WM issues! Now I know the truth though.
Obv. there isn't a lot we can do about this and I'm not prepared to turn off my Windows Live Mail or my direct push. I think we just have to wait until our contracts are up for renewal and get over to a 3G device - I'm liking the look of the Touch Cruise myself, or the Touch Dual if I want that keyboard back and by the time my contract is up I think they should be on T-Mob UK.
does the same thing happen in Edge areas or as that rolls out will the problem disappear?
I'm not sure about how EDGE works but the problem affects GPRS rather than 3G due to the fact that GPRS and the incoming call are submitted alongside each other and 3G is seperate. I don't think t-mob uk have edge running yet so I can't test, perhpas some else can test for us.
Bro.. My first 3rd party ROM is the Touch 3.0.. and yes.. my connnection did go off once a while (no bars as well).. that was kinda irritating. I have to go to connection manager and toggle my data connection or something like that, before my phone will get the GSM signal.
And yea.. the original WM5 and WM6 have no such issues.. I wonder if this is because of the new radio version..
Hi,
I bought an O2 orbit from Ebay which has the 02 official WM6 rom installed.
But it can't can't Make or receive calls.
But when I put my Virgin SIM, the Signal strength bar is in full, The network seems to be seletced as T-Mobile UK.
But can't dial out...no Dial tone
When I try to ring my Mobile, the voice message says 'Can't connect to this number at the moment'
Please HELP
I know this may not help MUCH but the fact that your mobile is saying T-Mobile instead of Virgin is normal - Virgin pay to use T-Mobile's infratructure as far as I know so it is normal to see it say T-Mobile.
Have you tried other SIM cards? Get a free O2 sim card and try calling it, or use a friends SIM, etc.
Also, have you tried flashing the Radio ROM? I don't know if it has changed over time or if there are any updates but try flashing a new one if you can find one.
Also, someone on this forum once managed to get ahold of the ROM O2 use to unbrick XDA ORBIT devices - the repair guy left his MicroSD card in the device and the ROM used to unbrick devices was on it - it had Windows Mobile 5 on it and was the original version. See if you can get ahold of that ROM and flash it. Or just try and flash the WM6 ROM from O2 again.
-EDIT-
Here is the link to the thread I was previously on about: http://forum.xda-developers.com/showthread.php?t=314866
Woah that was weird half an hour after I posted the above post, an Earthquake of about 5.3 Magnititude happened lol
Hi I was wondering if someone could help me, I've been trying to unlock my HTC S620 Excallibur all night. It's locked to BT with its stock firmware. I came to the conclusion that I would have to buy a code. Then found I could flash a hacked rom. Which I've managed to do fine. The problem is it won't connect to any network. I've tried numerous WM 6.5 based roms but get same problem with every one. Tried messing with everything, changing connection settings an locals etc. Btw I'm from the U.K, trying to use an O2 Genie sim in it, never had problem with the phone. Had it's contract terminated early, is there any way they can block hardware when disconnecting services? Or does it still need unlock code even with a cooked rom? I've tried an orange, t-mobile and O2 sim in it. The new number for each sim shows in the call settings, and any sim related things like shipped phone numbers and settings. But in the call options the region, area, voice mail and message center numbers are blank. Could that be a problem? Shouldn't they configure themselves. Argh I'm so confused. I'de like to use my S620 as a phone instead of an expensive mp3 player.
Thanks in advance for any help.