XDA Connecting to PC - General Accessories

I have an old XDA with an O2 Chip in and I need to Connect it to a PC I dont have the original CD and I brought a serial Cable. Is There any Drivers I Need to Connect this thing aprt from Active Sync

nop

Install activesync on desktop, do a soft reset on your xda, plug usb cable into pc, connect xda. The desktop activesync may find it automatically, if not run the get connected in activesync.

Related

activesync problem

Hi everyone.
I'm having a trouble with my Blue Angel Activesync. After installing and uninstalling Norton Antivirus (I only think this could be the source of the problem), the pocket PC doesn't connect to my PC anymore.
When I put it on the cradle it tries to connect as guest and then quickly disconnect (impossible to establish a relation).
I tried to uninstall and reinstall activesync, with no result. I also tried to use it with another Pc and it worked fine, so I'm convinced that I have a software problem with my PC.
Another interesting thing: if I leave the Blue angle while rebooting the PC Activesync mekes me connect and set the connection properties, but fails to syncronize...then disconnect...
I really don't know what to do.
Thank You in advance.
fabioB

Wirless Modem (USB) Problem...

o2 Exec running the iMate ROM, when I start the Wireless Modem, it displays 'COM OPEN ERROR' instantly, as if it cannot access a COM port.
Is there a setting I need to change, by the way this is without the device connected to the PC, and therefore is not to do with the USB port being used by ActiveSync
It is probably due to something using the port. Do you have GPS software running? Simply resetting the unit may fix it. You can also download a task manager here: http://www.phm.lu/Products/PocketPC/TaskMgr/
Kill off some processes and see if that opens the ports up.
Delete all com ports under bluetooth set-up.
hi will someone be kind enough to upload the usb modem drivers as I don't have my cd with me and need to download the drives to my exec then transfer them to my laptop and then get connected,
thanks
MDA Pro USB modem driver
thanks mate

USB not recognized

hey.. i have the XDA2s and my problem is that the PC that i have been using suddenly cant recognize my device when i hook it on the cradle.. it just says windows is not able to recognize the USB device.. i did try to download a new application for active sync from the O2 site but it still doesnt recognize it.. what do i do?
same device here my firend so you maybe in luck
1) checkr that connection via usb is enabled
2) try had resetting your device (try soft as well)
3) this may sound a little stupid but check the usb drivers on ur computer

help please!!..

my trinity can be charge using the usb cable connected to my laptop..but my laptop cannot detect my phone..what should i do?..please help..thanks
do you want to synchronize your phone with pc or just look for files on the phone?
to synchronize you need activesync
if not then you can use program called wm5torege http://4pda.ru/forum/dl/post/220519/WM5torage_19.CAB

Computer cant recognize my Diamon

Dear Sirs;
Maybe this part of forum not be the proper place for my question but I don't know the poeple more expert than XDA masters.
Since last monday, computer cant recognize my Diamond when I connect it by USB cable and "USB device not recognized" appears. I will be really appreciated if you kindly help me.
Best Regards
Dariush Chegini
Try reinstalling Active Sync/Windows Mobile Device Center.
First remove Active Sync/ WMDC, restart PC and than install Active Sync/ WMDC.
Thanks for your kind attention. I reinstalled Activesync...no change, computer can't recognize the Diamond. My Diamond charges with both charger and computer, USB headphone works but PC can't recognize it....
I'm so confused and will be really appreciated if XDA masters help me.
Best Regards
XP or Vista or Windows 7 or which OS?
I've tried by both WIN XP and Vista.
could be a few possibilities for XP atleast...
activesync - file->connection settings->allow usb connections checked
faulty cable, try another one
faulty port on computer, try another one
driver issue - a difficult one...
i had this on my xp, found out there's something wrong with the cable - phone charging fine via computer USB, but XP says it doesn't recognize the device so doesn't connect to activesync....
good luck
Try on your Diamond -
Start>Settings>USB to PC
Unchek "Enable faster data synchronization"
If none of the above solutions work, maybe a hard reset...
I tried another cables, all options in "USB to PC", Activesync options, hardreset, even install other ROM but PC still can't recognize the Diamond.
It seems to be a Hardware problem but Diamond can be charged by USB and USB headphone works properly... I'm so confused .
Thanks Millions
Dariush
dchegini said:
I tried another cables, all options in "USB to PC", Activesync options, hardreset, even install other ROM but PC still can't recognize the Diamond.
It seems to be a Hardware problem but Diamond can be charged by USB and USB headphone works properly... I'm so confused .
Thanks Millions
Dariush
Click to expand...
Click to collapse
Try this in order...
1. Connect diamond to pc - it should at least charge as your say, but not detect Activsync
2. Goto Settings > Connections > USB to PC
3. Check Allow USB Connections > Uncheck allow fast data sync...
Does it connect?
if not and if you are using Vista
1. goto Windows Mobile device Center
2. check the attached image to see you have the same settings...
Does it connect?
if still not, then it could be driver issues, which I can suggest, once you reply to the above...
Thanx for your attentions. I've tried uncheking the said bottom but no change.
I used to connect the Diamond to the same notebook without any problem for more than 16 months, but the damn notebook stop recognizing my Diamond these days .
Thanks Millions
Dariush
may be usb port on your computer is malfunction. Did u try different usb port?
You need to open device manager in control panel to see how you diamond is listed.
Ever since i started with a new company 3 years ago they have some software that prevents activesync from connecting to any device I have from their computers using USB.
I went Bluetooth method and all is fine. I just use the USB for large, direct file transfer to internal storage.
If you get issues with activesync and usb and can take ages to resolve (if possible).
I guy's.
After a lot of search in this forum and a lot of other forum's, i came to this threat.
I had the same problem, my diamond didn't connect to my pc.
I had tried all the different suggestion, and nothing seemed to work. until i read the post of cloudedhopes, that suggested to change the usb cable. Because it was the only thing that i hadn't tried, i did change the cable, and it worked!
So i'm posting only to thank you guy's for all of the help, given not directly to me, but to all user!

Categories

Resources