XDAIIs - and Thanks - MDA III, XDA III, PDA2k, 9090 General

Well it looks like i tried to flash my 2 day old XDA II's with the O2 Restore Rom and killed the thing. Spot the newbie eh. Wouldnt of thought it would of messed it up. As now my laptop dosnt reconise the Cradle so thus i send it back to O2 for reflashing.
I guess I have to rethink upgrading the unit for a while.
But I do like the unit very much, thinking or was thinking of getting the Jabba head set. From my understanding its ok as long as the phone is within 1m of the unit. Would anyone advise a better headset then the Jabba?
Also I guess the thing that makes the unit is the software you find for it.
What software do you swear by?
Reading though the forum I found a telnet prog handi for me
cause realplayer, as streaming music is a must.
I be using the unit as phone but also surfing stuff from home over the Wi Fi.
It seemed good for the 2 days I had it before i flashed it wrong. One question I could work out was the use of Wap over ur home wifi connection.
The setup I had work well for webpages telnet all that stuff. But i could not get wap pages to work. Would always try and dial up my gprs setting to use wap. Did I miss somet, do i need to map it to an online wap provider or proxy or somet? Or even somone telling me that you can use the wap on the XDAIIs would be help least then I keep digging at it.
Main question I guess for now is wot progs do u guys use? Think I leave flashing stuff alone for a while till am more stable with the unit
Russ

Related

O2 RELEASE ROM UPGRADE FOR XDA2S

I have been sent a link from O2 Data Support for downloading the new XDA2s ROM upgrade, which apparently will fix the Bluetooth problems.
The link is...
http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIs_launchROM.htm
Haven't done anything with it yet, but thought you guys might like to know...
regards,
Guy
Hmm I wonder if I can use this update on my O2 Xda2s.
I got it in Malasyia.
Noel
I installed it on my UK XDA 2s, I will report back later.
In the PDF it's saying that this version is only for devices sold by O² UK or O² Ireland... Not sure if I should give it a go on my version..
Noel
I think I might wait and see what others say about this before I install it myself. So many that have it already say it is great but then you hear others say it has caused problems.
That post is the launch rom, not an upgrade. LMAO It is intended for people who attempt to flash the XDA IIs with a different vendors rom and screw it up.
Mike
Nope, its not, click the link. O2 are obviously just too lazy to create a new page for a new rom!
Nigel
HAHA you are correct!!! LMAO oh well. :shock: :lol:
Hi..have installed the update..and have encountered several problems...was wondering if anyone could help me.
I hate the fact that the clock has disappeared from the top right so whe u are using applications its no longer visible. Is there any way of bring it back?
Also now when you click the o2 at the top it dosn't give the active connections anymore. Therefore whats the quickest way to disconnect the gprs? and is there any way of bringing that back to how it used to be?
I have also had to reset my phone more often that I had to before.
Was wondering if anyone had encountered the same problems and how to resolve them.
Thanks so much...
Bit the bullet and upgraded last night, wifi still works and as I use Corporate mode I don't get any issues with 02 active, icons or clocks. All seems normal, so far!
Have to agree with Dave. I finally bit the bullet and installed the update last night. Don't like the new O2 active and put the clock straight back with the registry key.
Other than the missing clock and poor O2 Active software which I never use anyway no real problems. Tom Tom still works fine with my Bluetooth GPS receiver. WIFI still works fine with WPA security and everything locked down on the access point.
Still receive SMS notification and its nice that you're not limited to 70 char when using ' in sms text messages now!
All ok.
har5ha:
Just get the old O2 active back. To to this, head to the xda-dev FTP site, find the old O2 XDA IIs extended rom, pull it, find the file install.ARM.CAB (O2 active)
Sync/backup yr stuff then hard reset the XDA IIs, and let it do its stuff. When leave it to install the extended rom, but be ready to soft reset it when you get asked the 'corporate/personal' question (you'll have to watch the screen since there is a timeout). Once it reboots, copy install.ARM.CAB to the machine, and execute it. It will soft reset yr device at the end.
I use 2 things from O2 active, the battery plugin and the O2 icon to kill connections. Shame billy did not think to include a disconnect dialogue as well really (he put on in for vpn).
There might be a way to install old over new, dunno. I tried and it locks loads of files (even if you prevent it from loading).
Nigel
thanks Nigel...I ended up installing gb soft for the disconnect button.
So its ok...still getting loads of crashing. I think am going to reinstall it and then use corporate mode..hopefully it will crash less!
can I get an update on xda iis rom update
Hi all, I'm still new to this whole thing but reading and researching all I can. Don't have an xda iis as of yet, but on the high streets waiting list. I like the phone and in one way, can't wait, but don't want problems when I get it, especially at the price. Can anyone on o2 that has purchased their phone from o2 let me know how you are getting on...problems...ect, before and after the update.? To be honest, I'm a bit afraid to bite the bullet and get one right now due to what I'm hearing...especially since I'm not very computer smart. I do understand that it depends a lot on the manufacturer of the phone but if I had problems like I'm hearing about it would really do my head in...(no patience). Thanks
Well I love my phone to bits...had issues with the update but now that I have hard reset it and put it corporate mode its not freezing anymore.
But you have to remember its a pocket pc...like a pc..will need to be reset every so often...I was resetting mine of average once a day. It just takes a minute.
There are some negative points..but the positive outweighs the negative I think. My old pda was palm os (clie) and this is windows which is really good! As well as the fact that it has a phone built in too!
Hi all.
Can you please post some more feedback on this rom.
How is the BT stability?
Range?
Crackling noise?
License Expired troubbles?
I know its Build 3500, but maybe something else in this rom makes a difference.
How about the problem with sound dissapering when you answer a call.
Any troubbles here? This is really a pain in the (_!_)
Running the New Rom for a couple of days now and it seems much better than the launch Rom, The O2 active stuff is just as pants as usual so remove that and the "Connections" exe from Windows\startup.
Best thing is that it's stopped the annoying bug of the GPRS settings being screwed up when you enable/disable Wi-Fi.
Recommend it myself
Password
Anybody knows the password for this rom
PDA2K Upgrade
Hi, Can this rom replace the i mate rom on the 2K.& If so will it then be sim locked to O2? as I want to use an O2 pay as you go, & T-mobile sim
many thanks in advance............

Settings for Cingular Internet (For use on wallaby)

I am trying to set up my phone to work on cingular wirelss internet. Does anyone know where I can get the info such as proxy server etc...
all comes to those who search
http://forum.xda-developers.com/viewtopic.php?t=26049&highlight=cingular+gprs
http://forum.xda-developers.com/viewtopic.php?t=21123&highlight=cingular+gprs
http://forum.xda-developers.com/viewtopic.php?t=15882&highlight=cingular+gprs
http://forum.xda-developers.com/viewtopic.php?t=6809&highlight=cingular+gprs
http://forum.xda-developers.com/viewtopic.php?t=7580&highlight=cingular+gprs
Sorry, bout that. (Old Rom)
I did do a little searching and didn't see anyting (obviously cuz I'm blind).. geeez..
I appreciate the help though.... but with every advance comes a new and interesting issue.. heh..
I unlocked the phone, installed the rom, and set it up for cingular internet. Everything is working great except now its so slow. I need to remove some of the "problems/programs" bundled with the rom but they aren't listed in the "add/remove" programs menu.(Caclulator, divx, etc...) When I was backing up my old rom it got corrupted somehow and I was wondering how hard it would be to get a copy of the old one again.
FYI,
Just using it for Excel, MSN Messenger, Cingular Service/Internet, Outlook, and just a tad bit of browsing.
Sorry again about being blind.. (*Slaps himself in the face trying to stay awake)

Use telephone and data connection at the same time?

Back when I had the base Cingular WM5 rom on my phone I was able to talk on the phone and have my data connection going at the same time. Since upgrading to WM6, XDA Live .20 and Black 2.0 I have not been able to get that feature back. To make a call it has to disconnect me. Then once I get off the phone call the data connection connects again. I tried the Allways On option in HTweakC that came with the WM6 releases but that doesn't appear to be what I am looking for. Does anyone else notice this or have a fix?
My device maintains a data connection whilst I am on voice calls. I receive emails fine whilst talking. Its on Black 2.0
KanosWRX said:
Does anyone else notice this or have a fix?
Click to expand...
Click to collapse
yes.. try your phone and data in a 3G area... voice and data only works in 3G not edge......
I have tried it in a 3G area, right by my work I have 4 bars of 3G. But everytime I try to call or get a call it always closes the data connection.
try using bandswitch and manually fixing the phone to 3G only.. just to make sure its really on 3G and not secretly on Edge..
When I select the WCDMA Network I get the 3G Icon, when I select the GSM Network I get the E Icon. So I think it knows the difference between 3G and E just fine. I leave the "band" setting set to Auto.
BTW I am using radio rom 1.38.00.10 now, but even when I had the factory 1.16.00.00 I still had this problem with WM6. It only seemed to work with WM5. Another strange thing, in the phone app it says UMTS Cingular, just another sign it is actually using UMTS (3G).
Its just so annoying if I am online doing anything, slingbox, browsing the web, then when I want to make a call, it usually fails the first time while it disconnects then it goes through
Another odd thing probably just part of the new radio rom, when online and it starts to load data it switches to an H icon, I guess for HPDSA or whatever that abbreviation is.
Are you sure its really closing the data connection? Ignore the icons. Send yourself some emails and see if they arrive whilst on voicecall.
KanosWRX said:
When I select the WCDMA Network I get the 3G Icon, when I select the GSM Network I get the E Icon. So I think it knows the difference between 3G and E just fine. I leave the "band" setting set to Auto.
BTW I am using radio rom 1.38.00.10 now, but even when I had the factory 1.16.00.00 I still had this problem with WM6. It only seemed to work with WM5. Another strange thing, in the phone app it says UMTS Cingular, just another sign it is actually using UMTS (3G).
Click to expand...
Click to collapse
i was saying to do this as a test, just to make sure the phone wasnt doing something funny... just some basic troubleshooting to help find the problem...
kinda like if your car wont start.. there are different problems that could cause it, maybe its out of gas, maybe the fuel filter is clogged, maybe the battery is dead.. different things can cause similiar problems, its better to eliminate all possibilities
I tested it this morning, data and voice works fine at the same time. Called voicemail and then opened up IE and was able to load several pages while on the call.
Edit, where are you located? Is it possible there is a problem with the network there? Try downgrading back to the Cingular software and see if that works.
Shogunmark, I figured thats what you were getting at, and I tried all the options I could that would give me a connection to the network, but I still couldn't do data and telephone at the same time. Everytime I was connected online then went to place a data call it would have to disconnect me first. I tried doing a phone call then connecting online, but nothing would load.
I guess I could try going back to WM5, but I have hard spl 1.4 on so I gotta do a little rom editing of the cingular rom to get WM5 back I guess. didn't realize it was that complicated to go back to factory after installing hard spl.
Im surprised no one else has this issue. Its been like this for me pretty much as long as I have had WM6, so I doubt its the cingular network.
KanosWRX said:
Shogunmark, I figured thats what you were getting at, and I tried all the options I could that would give me a connection to the network, but I still couldn't do data and telephone at the same time. Everytime I was connected online then went to place a data call it would have to disconnect me first. I tried doing a phone call then connecting online, but nothing would load.
I guess I could try going back to WM5, but I have hard spl 1.4 on so I gotta do a little rom editing of the cingular rom to get WM5 back I guess. didn't realize it was that complicated to go back to factory after installing hard spl.
Im surprised no one else has this issue. Its been like this for me pretty much as long as I have had WM6, so I doubt its the cingular network.
Click to expand...
Click to collapse
not at all, just drop a WM5 NBH into a folder with CustomRUU and use autodetect. it'll flash quite happily
How would I take the HTC Cingular rom (found here, http://www.america.htc.com/support/8525/software-downloads.html) and get the WM5 NBH? Or will I have to use another WM5 version?
Just chiming in to say I don't have this problem and I've used both those roms and still using WMXL 0.20 now and use data and calling all the time. I am using the same radio ROM as you now too and it still works ok.
What apps do you have installed? anything that would end the data connection for some reason? Maybe put a list of apps and customisations you've made since installing the WM6 rom you have?
You could also try it with a blank WM6 rom, manually add the data connection settings and try and see if that works? Just to eliminate 3rd party apps and thing's you've changed.
The only other similar thing i can think of is I do remember there was an issue where data would disconnect when changing between 3G and EDGE. I don't remember who had this problem or why but it could be related.
Let us know how it goes?
Maz
--------------
This would be great to add to the bug tracker website when I finish it.
http://maz.net.au/
KanosWRX said:
How would I take the HTC Cingular rom (found here, http://www.america.htc.com/support/8525/software-downloads.html) and get the WM5 NBH? Or will I have to use another WM5 version?
Click to expand...
Click to collapse
Use this guide to go back to the Cingular ROM.
http://www.mrvanx.myzen.co.uk/hermes_guide/Downgrade/index.html
Here are the apps I have
Resco File Explorer
Core Media Player
Slingbox
Don't run to many apps on my ppc as you can see. I mainly just use it to stream media from home (orb, slingbox), and internet connection sharing. I'll probably find some time tonight to revert back to WM5 and let you know what I find.
Well I just flashed back to the cingular rom, and guess what it's working again, can talk on the phone and be on the internet at the same time. So weird. well I guess I will try going back to Black 2.0 and see what happens.
Kanos,
Your problem is definitely not WM6. As in WM5, I can concurrently browse the internet during a voice call. As Mark said, there may be other issues specific to your case -- you'll have to methodically eliminate one-by-one... you'll have to decide if the process is really worth the time yourself.
FWIW:
Radio 1.34
HERMES 200 HT625 (in use since 7/4/2006)
Network: Manual (Taiwan UMTS)
Band: Auto/GSM(900+1800)+UMTS(2100)
Cheers
I believe it's not truly a problem with WM6, as people obviously have gotten it to work. I will definitely look into it more and keep you all updated on what I find. Right now I am still on WM5 but I will flash back to WM6, no apps installed, right after a fresh hard reset and see if it works or not for me.
I decided to try LVSW this time. Guess what it worked, I was able to both data and phone at the same time. Next test will be to install Black 2.0 again and see what happens.
My theory is this, I had XDALive .10 and maybe that version had this issue, then when I upgraded to .20 it carried over somehow and then carried over to black 2.0. Then once I went back to WM5 it reset everything. Don't ask me how, but obviously I have a lot more flashing to do to test this theory.
the imate site on wm5 proclaim this as a problem. when u r receiving data at a specific point in time u cannot receive a call.
the aust. telstra latest release says the upgrade fixes this.
to bypass going back to wm5 i just used the xda radio only upgrade to try and bypass. this was i believe only when receiving data and a call inwards simultaneously.
otherwise i have never had ur problem n likely a flash issue.
there is another i have noticed in recent releases is activesync now asks to allow data to be received when activesync this is a 4.5 change so perhaps looking for this setting may also help ur simultaneous data issue. just a guess but it might have been easy to not allow this when u upgraded to wmg which rwquired 4.5 to do this.
anyway goodluck with it.

WM6 Black 3.0.1 advice please

Hi All,
Wow, Been a while since i had to post on here for help.
OK, before you all start flaming, Yes i have searched for a few days, inc. google and the WM6 Black forum 4winblack to no avail,
Everyone asking but no one answering and just flaming (hence no one can find the answer when searching and leaving them no choice but having to ask)
ME.
Member on here since 2005 ( so no noob, I always search and find )
have a MDA vario II HERM 300
Running Windows Mobile VI - Black Edition 3.0.1
IPL 1.04
SPL 2.10.OLipro
Radio ver. 1.41.00.10
T-mobile UK W+W
OK the burning question that has me stumped.
and i am cringing cause i dont want you to flame throw me.
Windows Live issue
Unable to establish an internet connection. Can this be fixed and How?
I have re installed WM VI black Live & messenger cab but still same issue.
Messenger Sign in as issue
How do i get to sign in there is no where to sign in
just a blank pick and the option to go online.
Are these issues fixed and are they just relevent to WM6 Black or all packages, am tempted to downgrade or switch roms in hope.
Finally as last resort will posket msn work on WM6
Again sorry for asking but i do truly search, it a shame when you do get new users using such a great forum and they get flamed, Remember if everyone is treated in this way, how can anyone search and find the answer.
I have opened countless posts on the subject only to find the person asking flamed and no answer given. This makes it near inpossible to find the correct answer.
Didn't come on to moan LOL. Have a good un all,
Can't help on your other issues as I don't use Messenger or MSN, but I have no trouble with Windows Live with this rom. Connects with no problems.
You need to reenter your 3G modem settings in your connections so that it knows how to connect to the network. wap.cingular and then your 7 digit phone number is hte password.
Am able to browse web fine and hitting speed of 1200KB sec
used the TMobile UKFixed cab which auto does it all for you, but just keep getting this damn message.
Or am i missing something here...
ukmdb said:
Am able to browse web fine and hitting speed of 1200KB sec
used the TMobile UKFixed cab which auto does it all for you, but just keep getting this damn message.
Or am i missing something here...
Click to expand...
Click to collapse
hmm.. I have seen these issues before in other posts and enouctered some myself. Pimpmyblack has a tab which will allow you to have your gprs/media net on all the time (assuming you have unlimited plan). From my experience there is a bug with live, it doesnt like to establish gprs conn if it is not alread on. I have noticed this with piscel browser too. As much as I hate doing it, my non-hack work around is to open pie and connect to google. this establishes connection w/ gprs. its not ideal, but I have exhaustedly serached for a fix to this too with no avail. hopefully that can hold u over until the geniuses figure somethin out.
Yeah it maybe something with WM6 i think and the way it allows programs to hook up to the internet. For example everytime i use my opera mini i have to first open up explorer to establish an internet connection and then i can start using opera mini. So that maybe what is required for you to do. But i would highly recommend you to just switch over to one of the newer roms that have been cooked. I was on black 3.0.1 and just had to many problems with bluetooth and connections to the internet. So i strongly recommend that buddy.
thanks for the suggestions, glad others have herd of the problem but unable to find fix.
yes. I have tried pimp my black and changed settings to internet always on.
also tried with internet connection open and then trying windows live and messenger but both problems still exist.
shame as accessing my hotmail accounts instantly is a must.
looks like will have to try your suggestion of another ron.
recommendations ?
thanks
Well it looks like This was one good thread. started good and ended good. So lets lock it up if its cool with you guys.
agree, thanks to everyone.
to sum up.
I could not find a fix to the issues I had :-{
I eventually took the advice and changed roms.
now running Custels 2.5 and everything. I mean everything is working fantastic. plus the bonus of office 2007 and live is running great.
I can only suggest black is a little buggy for myself but hey im happy with Custels 2.5
thanks to all again.
try not and leave it another 2 years before I post again lol.

FIDO GPRS SETTINGS HELP FOR IM portal

Before you go on to post "read the wiki" ,"search the thread noob" etcetc
Ive done that and i found no help for it other than some settings, which i already tried(didnt work) and ive gotten more settings from the fido csr
and ive plugged those in but still no.(tested gprs/edge by starting pocket IE)
no connection.
I've gotten the value pack for fido which includes the Instant messaging portal for msn and yahoo where i can chat and message and check email unlimited... now the only problem is i cant connect to gprs/edge to use it.
question 1. how do i get the dam settings to work?
question 2. am i able to use the messenger included in the rom? or do i need to use the one specifically for fido?
question 3. once the previous 2 are answered..... Am I able to make it where only the associated program uses gprs/edge for data..so that way if i use pocket ie on wifi i can still use watever im using with gprs?
ie: surf the net on wifi, while im chatting msn on gprs?
thats all i got for now,
I'm using a softbank x01ht with black majik rom.
Thanks for any help i receive.
When I first got a windows phone I was so determined to get it set for Fido's services. With my Universal it took me days to figure out what the settings were. I thought I knew everything after that. Turns out that there are a bunch of other factors such as MMS won't work until you've exchanged msg's with another FIDO customer. Also internet doesnt work without a proper plan first, it doesnt work like it used to , which was PAYG. Lastly the settings don't kick in until you reset the phone, and even then I have heard stories from some where it took upto half hour for some settings to kick in. I find it so complicated now that I seem to know where all the free wi-fi hotspots are around my area.
I hope this doesn't discourage you from figuring out ur settings through trial&error.
I encounter none of what you said. I dont use MMS so I am not familiar with ..all others is no big deal.
It takes me 30 seconds for set up and I am ready to go.
ps: I am on a unlimited for years.....
Well I guess it mustve been different with the Universal and your Hermes.
thanks for the feedback still havent figured it out as of yet though i do know theres supposed to be a dial out to *90# or something like that cant check the txt i received from fido right now.
anyways i hope to get it up soon, im gonna try to port over the IM program thats in my friends rogers tytn and see if i can change the settings on that thing for fido.
wish me luck
They toys bahave different
neptune said:
Well I guess it mustve been different with the Universal and your Hermes.
Click to expand...
Click to collapse
You bet money on it. I have an 8125 and also an 8525, both have exactly the same UI to set the connections up, however with exactly the same settings I´m able to surf the WEB, get GMail, all MSN Live services,etc only with my Wizard because with the Hermes I´m able to open just a very few wap sites. I´ve had this problem since day one with my Hermes and looking for a solution in this site and in many others I´ve found that I´m not the only lucky person with a $400 toy that performs worst than the cheapest Nokia, there´s a lot of people with same problem and nobody knows why this happens. (See my signature)
For those who've got it working, could you please share HOW? It would be much appreciated.

Categories

Resources