If you do let me know if it works the way it should
I'm still having problems using my qtek 9090 on my 3 series BMW with a original BT carkit...
If yours works fine, please let me know wich software is on your PDA and which type of BMW you drive..
I have the following problem... The only way it works is; when I first swich on my car (so also the carkit) and then I activate the bt function on the pda. I also have a solution. That the bt function on my pda is off when the pda is off, but nobody can tell me how this is possible.
Thanks
I can use it as a dumb carkit but it does not sync the addressbook or the SMS
I have a Qtek9100 WM5.0 os 5.1.70 (Build 14420.1.1.0) ROM 1.1.7.5, radio version 01.01.10 and the car is an X3 330D
I found on several forums that you need to be at a higher version.
so if anyone knows how to only upgrade the Bluetooth or a sollution for us
Hi, I have an xda2s which happily ran tt5 navigator via a bt 77 bluetooth gps receiver on WM 2003. I have since upgraded to WM 2005 and have also updated my tt5. The tt5 works fine but I can't for the life of me configure the BT77 gps receiver. The method with WM 2003 was to configure it as "other nmea gps" at 4800 baud rate and connect via a bluetooth port. The problem I have is that on my xda2s there is no bluetooth port listed to connect to when trying to configure the gps receiver, it just isn't listed. I have paired the device. What did I miss? has anyone else had the same problem, can anyone help? A step by step guide would be really appreciated. Thanks.
:roll:
Someone know if it is possible to use my QTEK 9090 as bluetooth headphone for PC?
I'll try to explain better. I would like to use my qtek as headphone for Skype, connecting it to PC via BT.
Do you have suggestions?
Thanks
Hi,
After I install tomtom6 I'm not able to connect to my Bt headset?
Anyone had this same problem and solve it?
Regards
Kruz
i did the same - for me i had to select the bt headset via other bluetooth, where as before i had it set through other cable
hope that helps
shakirakbari said:
i did the same - for me i had to select the bt headset via other bluetooth, where as before i had it set through other cable
hope that helps
Click to expand...
Click to collapse
Don't you mean: Connect GPS via other cable in your TT6 config, instead of the BT Headset??
I have exactly the same problem here. (HTC Blue Angel with BlueTooth for Windows CE BT-PPC/PE Version 1.0.0 Build 3900)
When TT6 is installed, I can pair with my Jabra BT135 and create a shortcut, but I can't connect to it by using the shortcut.
After removing TT6 from the Blue Angel, I can connect to the Jabra using the same shortcut immediately.
So think with me here, why is this happening?
Could it be the case that the HTC Blue Angel is only capable of having 1 BlueTooth device/COM-port/connection/channel,
and that TT6 is somehow claiming a BlueTooth channel for a wireless GPS BT receiver that it could try to connect to and so the Jabra won't connect to it anymore?
Or is the HTC Blue Angel capable of connecting with more than one BT-device at a time, but are the headset and TT6 using the same COM-port for BT communications or something? In the second case, how can I change the port used by either the Jabra of TT6 ?!?
Does anybody have an answer to this?
have just resolved an issue others may have with TT6 installation affecting Bluetooth earpiece functionality.
Actually, I found the answer on the net after literally days of searching!.
If you have installed TT6, it will overwrite at least one bluetooth dll file. This can prevent other BT devices functioning after TT6 install. On my XDA 2s, I was able to pair my bluetrek G2 headset, but not connect. The answer is to re-name the "BtCoreIf.dll" file in the PDA wndows file to ""BtCoreIfold.dll".
Immediately, I had my BT earpiece functinality back, AND TTN 6 works too! Don't ask me how, it just worked for me
qtek9090
On my BlueAngel is the same with TT6 vs. Motorola Headset H300.
I've tried to rename BtCoreIf.dll but system don't let me to delete the original file I thing because it is in ROM.
I simple do a workaround: open bt service and connect the headset manually
argosafe said:
have just resolved an issue others may have with TT6 installation affecting Bluetooth earpiece functionality.
Actually, I found the answer on the net after literally days of searching!.
If you have installed TT6, it will overwrite at least one bluetooth dll file. This can prevent other BT devices functioning after TT6 install. On my XDA 2s, I was able to pair my bluetrek G2 headset, but not connect. The answer is to re-name the "BtCoreIf.dll" file in the PDA wndows file to ""BtCoreIfold.dll".
Immediately, I had my BT earpiece functinality back, AND TTN 6 works too! Don't ask me how, it just worked for me
Click to expand...
Click to collapse
I will try this out tomorrow on a HTC Blue Angel.
vdl said:
I simple do a workaround: open bt service and connect the headset manually
Click to expand...
Click to collapse
Then you don't have the problem as descibed in this topic at all. Because when TT6 is installed, it is impossible to connect to the BT headset (manually).
So I guess you are lucky.
Flow said:
Then you don't have the problem as descibed in this topic at all. Because when TT6 is installed, it is impossible to connect to the BT headset (manually).
So I guess you are lucky.
Click to expand...
Click to collapse
I think so: when headset is connected, TT6 do not connect automatically the Gps receiver, I must to doubleclick on Gps icon.
And vice versa.
I have a Garmin eTrex Vista HCx which has a mini USB. I want to connect the GPS to my HTC PocketPC, Cingular 8525. Anybody has an idea whether it can be done. If possible where can I find such a cable to connect from the phone to the miniUSB on the GPS.
Thanks,
GPS on 8525
I have the same Garmin and an 8525. Using a cable with gps is not very satisfying. I also have a Globalsat 359 bluetooth receiver which works extremely well with TomTom on my 8525.
shankar_roy said:
I have a Garmin eTrex Vista HCx which has a mini USB. I want to connect the GPS to my HTC PocketPC, Cingular 8525. Anybody has an idea whether it can be done. If possible where can I find such a cable to connect from the phone to the miniUSB on the GPS.
Thanks,
Click to expand...
Click to collapse
Just a FYI, since no cell phone I have ever heard of is a USB Host, this will never be possible. Bluetooth is your only way to go. I use the Holux GPSSlim 236 and it works great!
NO CAN DO..... only bluetooth..
http://www.weethet.nl/english/pda_ip...x.php#nulmodem