Develop Bugs

Qtek 9000 from french to english

Hi all,
I just bought the qtek 9000 but os is in french, i have the os in english but when i want to do this it says wrong rom. Could someone please guide me threw this problem.
Also if i'm able in the future to get it upgraded in english wont i have a problem with the azerty keyboard, cause english os is with qwerty keyboard no?????
Please advice
Daffy

Hello,
First, extact your new english rom, than repace files in new rom with files in my package. Put universal in bootloader mode, run MaUpgradeUt_noID.exe wait... 30-40 minute and enjoy new rom

Thx for the reply but this is chinees for me. I am completly new at this. What do you mean with extract new boot and afer that replacing files with yours??? Extract from where and how?? also upgrade tool is showing picture from S100 and mine is 9000?? then how do you put your phone in bootloader mode??? and what about keyboard problem???? ( azerty/qwerty )

this is what i get as error :

I know that You have country id problem, I will try to explain how to.
1 If you have upgrade file as XXXX.exe you will have to extract that file using win rar (just right klik on it and extract to your folder.
2. Unpack file from my package WM2005reinstall.rar
3. Replace file in the original unpacked rom with files from WM2005reinstall.rar (RUU.dll , Getdevicedata.exe ...
4. Run MaUpgradeUt_noID.exe That file has no country specyfied so You can install Your rom (English). It is working in all MDA so don't worry about different picture.
Hope it wiil be clear if not - write ...

Ok got that. Finally but before i try this upgrade, what about keyboard. Will it be different?? (azerty/ Qwerty, do you know this...
Thank you verry verry much

If it is WWE rom (World Wide English) it will be qwerty

If other like German - qwertz

thats a problem then cause mine is azerty any sollution for this?
And again many thx for your help

thats a problem then cause mine is azerty any sollution for this?
And again many thx for your help

daffy duckati said:
thats a problem then cause mine is azerty any sollution for this?
And again many thx for your help
Click to expand...
Click to collapse
Here's your solution:
1. Get a registry editor. Here is a free one :
http://www.pocketpcfreewares.com/en/index.php?soft=92
2. Look at the value in the following:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty
The DWORD should show what the FRENCH code is for in XXXXX format. Write this down.
3. Upgrade to the new english ROM
4. Install again the RegEditor
5. GO to same local key and the key will be 66589. Change this to the value of the french keyboard (value you got from step 2)
Goodluck

Asian Languages Supported QTEK 1.30 ROM with A2DP+Push Mail

based on QTEK 1.30 ROM .Asian Language Suport ROM is here
Dlownload from Here!
http://www.asukal.jp/ROMs/Qtek_CJKT_130.rar 54MB
ROM has
1;Asian support All in One font <thailand / Japanese / Simp-Trad Chinese / Korean>
2;also Asian Language Encoding support wince.nls, enable encodeing in INBOX, IE,
also able to run Loclized Applications
3:Extended ROM is opened in Default
4:CAB install Security Prompt was killed <but after QTEK Extended ROM files were installed,
it will revive again, you must kill it again
5nly OS ROM image <NK.nbf> was included. Radio Image and Extended ROM image must prepared by yoursel.
6;Chinese and Japanese font for ClearVue also in this.
Enable PDF view in Chinese * Japanese
i tested on my jasjar, no problems, but now many gusy have faced the problems after flush NEW ROM.
After flushed ROM, the device was Stucked on Splash Screen.
So you must know flushing ROM is dangarouse and do it as your own risk.
i can not take responsibilty.
<My Exec also died after flushed I-mate latest 1.30 ROM>
-------------------------------------------------------------------
*default keyboad Rayout is Japanese <0411> you can change Valu as your Country code
[HKEY_CURRENT_USER\keyboard layout\Preload]
@="e0010411"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
@="e0010411"
*nls value in Registry is also Japanese, yu can change it.
HKEY_LOCAL_MACHINE\nls]
"DefaultLCID"=dword:00000411
"DefaultACP"=dword:000003a4
"DefaultOCP"=dword:000003a4
"SystemLCID"=dword:00000411
"LegacyLocaleMode"=dword:00000001
*Internationa Default code also set as Japanese code 0411.
Addjust as your like
[HKEY_LOCAL_MACHINE\Software\Microsoft\International]
"ACP"=dword:000003a4
"LCID"=dword:00000411
****USE registry editor to edit avobe, or one of my friends created
Aplet to able change some of those value with Graphical Inter face.
Namede JUflounder.exe
you can download it free! thanks to him
http://aimakidechi.hp.infoseek.co.jp/jasjar/contents_007/contents_007-002-en.html
Enjoy it!

Thanks, has it included the Chinese IME (like Pinyin by keyboard)?

sorry no china-japanese ime on it.

i didnt succeed to get any Chinese SIP with Hard Keyborad support,
But some Soft Input Panele include hand writings are here.
http://xdao2.seesaa.net/article/12029203.html
Go to option, you can switch the option language to Chinese or English.
Also input Letters can be swithced Simple or Traditional Chinese.
Sorry no support and use as your own risk.
also some tipes are on
http://xdao2.seesaa.net/

Did you mean thai font include?

wammy28 said:
Did you mean thai font include?
Click to expand...
Click to collapse
ya, uesed a Unicode font included Thai font<i dont know it cab be beautifull to use for You Thailand Guys>
PLS see the Captures here
http://asukal.seesaa.net/article/9314068.html
Thai Font+Both Chinese+Korean+Japanese into one font.
also Reginal setting and Encode in IE and Inbox
PLS see here for that
http://asukal.seesaa.net/article/6290940.html
http://asukal.seesaa.net/article/9323597.html
***Japanese Site, so you can see only Captures!*****

Thanks for you quick response
I already tried it. Thai font work very well. You can see my post from here http://www.pdamobiz.com/forum/forum_posts.asp?TID=56426&PN=1&TPN=1
However, some thai characters don't display especially thai characters in the third (top) row (I thought you known that thai language has 3 level of display). I'm very interesting to your work. Unfortunately , I can't read japanease. If anything help to improve this ,tell me.

Extremely good thanks!
But has a question When establishes the e-mail box 1. Mailbox address input OK 2. Segment OK 3. Name account name password OK4.POP3 hypothesis e-mail box name OK. The fifth step cannot go in afterwards Why? Regional settings I use Chinese (Taiwan) thanks!
Dopod 900
rom 1.13.36 CHT
radio 1.09.00
extrom 1.13.134 CHT

first of all, pls flush Geniune Qtek Extended ROM also.
this may have device drivers or important files.
size is totaly 750kb all CAB
also QUESTION for all gusy flushed my rom.
My ectrom has opend, you may also.
But i cant write and delete files into Extrom.
How about yours??
can you write or delete files?
it seems to be written or delete, they will returen to default after soft reset
:shock:
ming15> i can finish set up of e-mailaccount.
i dont think it will not be able to go step 5.
pls try again or flush rom again.
wammy28>the thai font problem is coze of the Font I injected.
due too no knowlege of Thail language for me,
i coudnt fount it.
i used Uniceode font, one font included Multi Languages FONTs.
i prefere use this font or another Unicode font.
But very few Unicode font has such like many Language support.
If they have, the size of Font will be 20MB or 30MB like a cyber unicode font.
i think if you thailand guys need correct one.
we must make another ROM for Specialize Thiland Language.
good luck!

I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.

ming15 said:
I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.
Click to expand...
Click to collapse
i got made Special tools with Buzz's tool. to unlock extrom for New Qtek<if cant unlock with old tool>
DL this one, and remove all previouse unlock tool if you use already.
<hard reset is better>
Install this can, the go to Start Menu and find Unlocker Icon,
And Excute this, make soft reset.
Mabe you can get Extrom free!

hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's

alisultan said:
hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's
Click to expand...
Click to collapse
of course you can do that!
just replace wince.nls in ROM and inject Arabic font also into ROM,
then add the fontlink registry of default.hv.
thats all, if you upload Arabic font and registry and wince.nls here,
i can make you soo!
But if later than today, i have no time till at theend of May due to business trip!
My summary to ROM cook is here
http://www.asukal.jp/hv_rom/default.htm

Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!

kimlui said:
Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!
Click to expand...
Click to collapse
ofcourse u can use in Exec,
you problems is one of troubles while upgrading,
USB mode?　right?
try to use UNI_ExitBootloader.exe by Buzz,
http://forum.xda-developers.com/viewtopic.php?p=254595#254595
hope you can get out from Bootloader.
So all guy who want to try upgrade, pls read following thread well and
must be know unofffial upgrade has some dagerouse with u!
here! please read well.
http://forum.xda-developers.com/viewtopic.php?t=43592&postdays=0&postorder=asc&start=0
i told you all again! i can not take any responsibilty even you will be in trouble with upgrade. This ROM doesnt have problem, but can not gurantee!
My Exec also have still stucked on Splash Screeen by myself after try Upgraded with Offcial I-mate rom. still......
Giood Luck!

thank's for reply
but wher could i gent wince.nls for arabic , i have thes file from a thaird party software do you mean this one and i inclood the font as wel please check
thank's

German keyboard file for wm6.1 ENG?

Hello,
i install the shadow 2.1 CE Clean version ENG but everything works fine
but the problem is i can`t writing in my qwertz keyboard german
Have you people a idea how can write in german
it is possible to add german keyboard files in wm6.1 ?
Whats folder and File Please help me?
Thanks
Peace to the people
i have a mda vario 2

If you're talking about hardware keyboard, look at the Hermes Wiki or install Advanced Configuration Tool by Schaps.

Is this corectly i must only change the registry to use German Hardware Keyboard nomore files needed
Great Thanks
Restore local language support for sliding keyboard after upgrade to a different language ROM
This has been reported not to work, see below for another hack
You need to create Registry value of name "Locale" and type of "String" and data of "Localization ID" within
[HKEY_CURRENT_USER\ControlPanel\Keybd]
Localization IDs:
German = 0407

superman13 said:
Is this corectly i must only change the registry to use German Hardware Keyboard nomore files needed
Great Thanks
Restore local language support for sliding keyboard after upgrade to a different language ROM
This has been reported not to work, see below for another hack
You need to create Registry value of name "Locale" and type of "String" and data of "Localization ID" within
[HKEY_CURRENT_USER\ControlPanel\Keybd]
Localization IDs:
German = 0407
Click to expand...
Click to collapse
no. you have to read carefully the wiki. you will see there that you have to create it in
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
the name of the key is Layout
the value (hex) of the key is 20407
do a soft reset via switching the device off (long button press of the on/off button) as it keeps your changes. otherwise you will loose your changes.

Thanks that works fine

this CAB does the registry entry for a german keyboard and installs the file (\windows\sym.0409.txt) for the german umlauts (that you get ä first and not á when you switch via dot + space)

Vielen Dank

Hello,
i've installed the rom HTC HERMES_CE OS 5.2.19949 Build 19949.1.2.0. and your tool doesn't work with this rom. Do you know what I can do to have the german Umlaute (äöü)?
Thanks a lot.
Greetz.

edit the file \windows\sym.0409.txt yourself. it is very easy.
have a look into it and you will see what i mean.
colt-ca0 said:
Hello,
i've installed the rom HTC HERMES_CE OS 5.2.19949 Build 19949.1.2.0. and your tool doesn't work with this rom. Do you know what I can do to have the german Umlaute (äöü)?
Thanks a lot.
Greetz.
Click to expand...
Click to collapse

Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]There is a key called 'Layout' and it is in Decimal.
The suitable value for German Hermes keyboard is 20407 (132103 in decimal). =qwertz

Thanks for the posts. I installed the rom, then I installed the tool of stan23. I looked into the registry and the value is 20407. When I want to use the hardware keyboard I can't write a "ä, ö, ü" not even an "á". I can't understand it.

check the following:
- is the file sym.0409.txt still there (maybe you have deleted it?) and have a look into it.
- is the value of the reg.key 20407 HEX
- when typing: make sure you press "a" then "dot-key" then "space-bar".
if this does not work, hard-reset.
if this does not work, try a different rom

How to get Samsung i780 Keyboard Qwerty to Azerty driver ?

Hello all,
i have read through a lot in the forum and have alerady flashed and tweaked a lot my i780 with my readings of your Forum. (after doing the same for my TyTNII !))
Bravo to all BTW.
I have a French i780 with an AZERTY keyboard.
I have flashed with the DXHC4 PDA & Phone ROM found here. Since then I have a QWERTY keyboard when the physical keyboard is AZERTY
I have tried the registry edition in order to modify the keyboard mapping to 040C code in the 3 locations described in the different posts without success as it rendres inactive the keyboard.
I tried the different combinations etc...
Here are the exact lines :
in hkey_current_user\keyboard layout\preload string default e0010409 changed to e001040c
\\\HKLM\System\CurrentControlSet\Control\Keyboard Layout\Active to 0000040c
Is there an issue with a dll or someting in addition ?
Also, I do use RealVGA in 96dpi with an English pack as the french pack is trashing the i780
Any idea is more than welcome !

Hello the i780 specialists ?
Any Idea what registry key to update ? or which driver ?
do you think a cab like the one for the Kayser can be compiled ?
Thanks

While youre on it, please get us the key for Swedish keyb as well
I flashed with the english ROM as well, and....

I am pretty sure there must be a way and it would be great to know the right registry location - would like to change mine over to QUERTZ as I am having an English rom with a German keyboard...
And ideas anyone?
Thanks
Alex

AE Keyboard Mapper
While we are waiting for better solution the buttons can be mapped to right letters wit AE Keyboard Mapper program. I've mapped my samsungs ä and ö buttons with that and they are working as they should.

Juggeli said:
While we are waiting for better solution the buttons can be mapped to right letters wit AE Keyboard Mapper program. I've mapped my samsungs ä and ö buttons with that and they are working as they should.
Click to expand...
Click to collapse
Yes it work but i creates a very irritating keybaord lag when using the keys that is mapped with AE keyboardmapper.

Yep, I have seen this tutorial, but I must admit that I am not at all interested in the software emulation. I 'd rather wait for a proper OS / registry / hw solution

No news guys ???

First of all, I'm no export in this and want to apologize for my english, cause I'm german.
Me too wants to change the keyboard layout as I have an english rom with qwerty and want to get back my german qwertz-layout.
As far as I've found out there is an registry entry under "HKLM/Hardware/DEVICEMAP/KEYBD/DriverName" which with my device maps to a dll named "zylonite_keypad_us.dll"
This file seems to be located in the ROM. I couldn't copy it for editing. Maybe someone can develop an idea how to deal with this.

solution here :
http://forum.xda-developers.com/showthread.php?t=290967
For now my keyboard does more, but I hope

webise said:
solution here :
http://forum.xda-developers.com/showthread.php?t=290967
For now my keyboard does more, but I hope
Click to expand...
Click to collapse
Do you have an I780?
If yes, which of these mentioned steps did you do?
This is not yet working for me. At the Moment the hardware keyboard doesn't work at all...
Edit: So, keyboard is working again. But "z" and "y" are still "swapped". So still not the German- QWERTZ

Same here, ive got an azerty i780, but this tip does'nt work for me

It doesn't work at all
The keyboard is rendered NON active by modifiying these reg keys / strings ...

webise said:
solution here :
http://forum.xda-developers.com/showthread.php?t=290967
For now my keyboard does more, but I hope
Click to expand...
Click to collapse
When I change the settings like that thread, my keyboard stopped working
I use the code: 041d for Swedish.
Mind helping out what I need to do? I followed the instructions from that page but the keyboard just stopped working, the hardware keyb that is.

In my humble opinion the problem is that when we change the registry keys we are telling windows to use a different dll that simply is not there, and so the keyboard becomes inactive. The solution is that someone with a German WM6 gets the german dll and shares it with us.
Regards,
Luís

Before flashing my azerty orange fr i780, i saved HKLM sytem tree, and the dll is the same.
The only difference in HKLM tree is :
\\HKLM\System\CurrentControlSet\Control\Keyboard Layout\Active
040c for azerty french
0409 for US
But doesn't work on my device

lmbranco said:
In my humble opinion the problem is that when we change the registry keys we are telling windows to use a different dll that simply is not there, and so the keyboard becomes inactive. The solution is that someone with a German WM6 gets the german dll and shares it with us.
Regards,
Luís
Click to expand...
Click to collapse
Or a Swedish ROM since there are a few of us that would need the swedish dll then

I still got the German phone and intend to upgrade to UK ROM. What dll exactly do you guys need?

dll is : zylonite_keypad_Us.dll
But totalcommander refuses to copy the file

entropy said:
I still got the German phone and intend to upgrade to UK ROM. What dll exactly do you guys need?
Click to expand...
Click to collapse
Do you have a registry editor on yout I780?
Then look at: HKLM/Hardware/DEVICEMAP/KEYBD/DriverName
There should be a .dll listed.
I guess thats the one we need. But I fear, as webise said, that you can't copy this file from your windows folder. As far as I've seen this file is in ROM.

[Samsung i780] Keyboard layouts for all languages - PLEASE ATTACH HERE!

I'm building a tool to hot switch between different keyboard language layouts with a simple soft reset. Can you help me by giving all different keyboard language dlls here? The two files i need are the zylonite_keyboard_xx.dll and sym.xxxx.txt files from your corresponding language.
Please add all these here, and i'll support those many languages! I currently have russian, swedish, german, english with me right now.

here
msn: [email protected]
mail:[email protected]
I will give you the korean .dll

I'm interested with having a i780 rom with french keyboard.
I have a windows 6.1 rom and I found zylonite_keypad_Us.dll and sym.040C.txt but I was not able to copy these file from the phone.
The files are read only and it's impossible to change status with totalcommander program.
Any idea to copy files?

poirelotto said:
I'm interested with having a i780 rom with french keyboard.
I have a windows 6.1 rom and I found zylonite_keypad_Us.dll and sym.040C.txt but I was not able to copy these file from the phone.
The files are read only and it's impossible to change status with totalcommander program.
Any idea to copy files?
Click to expand...
Click to collapse
yes man its possible. you need to install resco file explorer http://www.resco.net/pocketpc/explorer/ this one works, or SOTI http://www.soti.net/default.asp?Cmd=Products&SubCmd=MC

here's a picture from WIP....
currently paused development until i get some time...
Right now, the app switches all registry settings to point to different dlls....so a rom cook needs to embed different language dlls into the rom as modules, and users will have access to different keyboard languages by simply selecting what lang to use
cheers

Thanks for your help Heineken78, I will try.
dreamtheater39, can you give me all registry settings necessary to change keyboard layout?
regards,

poirelotto said:
Thanks for your help Heineken78, I will try.
dreamtheater39, can you give me all registry settings necessary to change keyboard layout?
regards,
Click to expand...
Click to collapse
ufortunately Poirelotto, you will be not able to make it work by replacing only file and cheanging registry settings, replacing can be done only in ROM before cooking.
There is another idea to rename desired zylonite_keyboardUS.dll driver and change registry whereever this filename found to new filename.
Should be working.

Hi Heneken78,
I installed RescoExplorer but it's impossible to copy zylonite_keypad_us.dll because it's properties are : readonly,system,ROM
Any idea to change properties of the file and allowing it to be copied?
Thanks,

poirelotto said:
Hi Heneken78,
I installed RescoExplorer but it's impossible to copy zylonite_keypad_us.dll because it's properties are : readonly,system,ROM
Any idea to change properties of the file and allowing it to be copied?
Thanks,
Click to expand...
Click to collapse
Then install S O T I http://www.mediafire.com/?sharekey=d86fc601ac0d83010de4fc1039a01674e04e75f6e8ebb871. It does total remote control of PDA. Usefull program

I dump the rom so I can get files from the french ROM.
Please tell me when french keyboard is available on your tool.
regards,

I dump the rom so I can get files from the french ROM.
Please tell me when french keyboard is available on your tool.
http://www.mediafire.com/?sharekey=4f45fd5d4cbfe9f341446e35a78dc463e04e75f6e8ebb871
regards,

almost done with the keyboard DLL switcher
heres a pic!

so when we can test it ?

will release a new rom with this tomorrow....hang tight

hmm so u can make a cab file too ?

ssr_german said:
hmm so u can make a cab file too ?
Click to expand...
Click to collapse
hmm...at the moment, it has to be cooked into the rom in a special way to get it to work.....still working on getting it to simply install as a cab file....
so at the moment, it'll go into the rom....and maybe the next version will be just a cab installer
cheers

oh ok so i wait for the cab
thnx
ssr

so this will change both soft and hardware keybord? or only one of them?
if it will be in cab later would that work on 6.0 6.1 and 65 builds as well as offical realeases of 6.0 and 6.1?

ElVikin said:
so this will change both soft and hardware keybord? or only one of them?
if it will be in cab later would that work on 6.0 6.1 and 65 builds as well as offical realeases of 6.0 and 6.1?
Click to expand...
Click to collapse
hardware keyboard. For software, theres anyway FingerKB that i embed in roms....which has all keyboard layouts.

i780 spanish keyboard
Hi,
I've got an i780 with Original Spanish ROM (WM 6.0 sadly)
I've searched the files you are looking for, and I found the txt file, but the Zylonite_keyboard_xx.dll doesn't exist on my rom... I found another file called "zylonite_keypad_us.dll", and I've attached it with the txt file.
Hope it will help you.