Hi,
I have a big problem with a XDA i buyed yesterday.
The original rom was an italian rom, so i just wanted to upgrade to a english rom.
But the whole update failed with error 012 and my XDA isn't starting up anymore (i see two bars with the XDA first time alignment screen as background)
Now i want to flash it, just wrote the nk.nbf image to an sdcard (with XDArit) with the 3.5 option.
But it doesn't start at the diagnostics menu.
Just load's to the bootloader menu
If i just choose any option like BOOT ->SD than i get an error "CARD FAIL" if there's no card it says "NO CARD" so it's recognizing the card...
Has someone succeed to boot from an SD card with the 5.22 bootloader?
Related
Folks,
I am new to the group.I have XDA which konked off during upgrade to 2003 from 2002 PocketPC version.I am following the below listed AT&T support procedure to recover.
When I try to copy the os image using XDA os image tool, it is coming with an error saying "Target device is too small to hold os image".
But when I see the size of the image in Windows explorer it is listing it as 30.2 MB [31,764,992].But when I see the size of an image of NK.nbf file it is 32,505,888.
Can somebody help me?Thanks in advance.
Cheers
MSAR
-------------------------------------------------------------------------------
ATT procedure to recover XDA
Fix
Pre-requisites:
A blank 32 megabyte SD (secure data) card.
A SD card reader.
Hard reset the SX56 and press the Power button.
A color screen stating "Wallaby Boot" will appear with the version number. A check of the GSM service will be run.
Download the XDA (the other name for our phone) OS Image Tool, at http://wiki.xda-developers.com/wiki/XDAtools.
Plug in the SD Card Reader with the SD Card inserted in it to the PC.
Once download, open "XDA Tools XDA OS Image Tool" from the Start Menu.
Do NOT use the fix broken boot loader option from the sub folder.
In the Source pull down (the top section) click the "..." next to the pull down and go to C:\Program Files\SX56 upgrade utility\english\NK.nbf
This is the location of the Windows Mobile 2003 Operating System Image that was installed when it was downloaded and ran the initial upgrade process.
In the "Destination" pull down, select the SD Card Reader.
Click the Copy button.
Once the procedure is complete in Image Tool Program, disconnect the SD Card Reader and remove the SD Card.
The SX56 should still be at the Boot loader page, if not hard reset the SX56 again and press the Power button to bring it back to the boot loader screen.
Hold the Power button and use the stylus to press in the soft reset button (both at the same time).
This will bring up a 'Copy Image from SD to ROM' selection.
Select "To copy from SD to ROM", (this will take a few minutes).
Once the upload completes, soft reset the device.
Verify the version number of the device.
Either from the device menu:
ROM Version A.30.09 ENG
ROM Date 01/01/04
Radio Version A.33.02
Protocol Version 1.3.3
Or from the inital boot up screen:
G1.3.3
A.30.09
RA.33.02
If problems persist, please contact Siemens at 888-777-0211.
This topic has been discussed at http://forum.xda-developers.com/viewtopic.php?t=9627
The ~8MB difference is the File Allocation Table (FAT) stored on the card. You will need to get a 64MB SD card to store that file on.
it is not the FAT, it is a bug in the memory card driver, that it reports incorrect values for the diskgeometry, as reported by the IOCTL_DISK_GETINFO function.
see this page.
I should maybe use a different function to get the disk size, like GetDiskFreeSpaceEx or IOCTL_DISK_GET_LENGTH_INFO ( I have not tried those to see if they give more accurate values )
Ok before everyone asks, yes I have searched the forums about this.
While attempting to flash Pays ROM this morning, it got to 3% then threw the error "ERROR [302] : UPDATE ERROR". I have tried a soft reset and a hard reset but I can only get the phone to the WM6 screen or into the bootloader.
I have tried a few different ROMs from 2 different PC's with the same result. I have tried the HERMIMG.nbh on the SD card method but when it goes into the bootloader screen I see it flash loading for a split second then go back to the bootloader and stays there. The .nbh is from Pay's full ROM.
I am running SPL-2.10.Olipro
Any ideas? I have tried everything I could!!
Try the Official HTC ROM
Have you tried using an official ROM?. they are the most 'complete' ROM's and have all the error free software.
Woohoo it's back
Ok it is up and running again (thanks to the phone gods)
Seems it would work on the SD flash method with a 2GB sd card but worked straight away with my 1GB card.
All good now.
Lessons learnt .. keep cat away from computer while flashing ROMs!!
quidjibo said:
Ok before everyone asks, yes I have searched the forums about this.
While attempting to flash Pays ROM this morning, it got to 3% then threw the error "ERROR [302] : UPDATE ERROR". I have tried a soft reset and a hard reset but I can only get the phone to the WM6 screen or into the bootloader.
I have tried a few different ROMs from 2 different PC's with the same result. I have tried the HERMIMG.nbh on the SD card method but when it goes into the bootloader screen I see it flash loading for a split second then go back to the bootloader and stays there. The .nbh is from Pay's full ROM.
I am running SPL-2.10.Olipro
Any ideas? I have tried everything I could!!
Click to expand...
Click to collapse
Spooky.....
quidjibo said:
I have tried the HERMIMG.nbh on the SD card method but when it goes into the bootloader screen I see it flash loading for a split second then go back to the bootloader and stays there. The .nbh is from Pay's full ROM.
Click to expand...
Click to collapse
For what it's worth, I had this issue as well that was resolved by checking the SD card... it was formatted as FAT, not FAT32.
After the reformat, the image was seen on the card and the phone was flashed successfully.
EDIT: This was on a 1 gig SD card. The flash card formatting software I grabbed from panasonic formatted the card FAT, not FAT32
i have htc p3300 i have finished upgrade dis rom WM6.1 htc p3300achilles_ROM_ver_3_YouTube.1.321C02 after upgade finished my battery drain faster den i plan to upgrade radio rom, ARTEMIS_RADIO_3.39.90 it stuck in 79% but right now i got only searching for sd card then boot loader mode i have been seen lots of thread in dis forum i got only suggestion to run original htc shiped rom but da problem is when i upgrade original htc rom i got 274 error again and again i cant upgrade the original rom please help me urgent am upset
sometimes i get bootloader mode sometime i cant get,in begining searching for sd card den i get bootloader mode, is there any way to flash rom through sd card?i thought my battery is lessthan 50% how can i charge my battery in bootloader mode plz give me the solution.
If you are in bootloader you don't need 50% of battery.
Just flash the ROM.
See here for Sd-card flashing: http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
thank you for ur reply, i have rename .nbh file and put into sd card when i start phone first i get searching for sd card, den searching for sd content after 20 minutes its back to 3 colour bootscreen any solution?
thanking you.
Are you trying to do it with a SDHC card?
no just i have normal 1gb and 128mb micro sd card, first i try in 1gb card den i try 128mb card still i havnt upgrade ruu its first searching for sd card den searching sd contents datz it after dat pda is automatically turned off i do no y, how can i find SDHC card normal sd card?
yet no replies urgently required pleaseeee
my artemis always in bootloader mode i cant flash original rom also which rom i have to flash? everyday am trying to upgrade its shows 0% then upgrade error (266) and i cant sd flash also just searching for sd card den checking sd content and back to bootloader mode how many files i have to copy in sd card? am waiting for ur kind repleis thank u.
similar problem
I have some problems with my ARTEMIS P3300 (arte 100).
problem : I can't flash HTC WM6 english from http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
Why I need a clean rom : I tried FlyROM Manilla and Touch ROM WWE 4.02 full and vanilla but they are unstable. I had many white screens, phone shutting down in conversation, freezed many times.
I tried to flash with USPL and got the INVALID MODEL ID error (if I used a wrong rom please tell me what to chose from the list http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades ) ;sd card and sim were out, battery full
I tried to sd flash following these instructions http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing and got to the Update sd image but after presing the slider down the screen faded down. after 1/2 hour I pressed the power button and the old rom started
what was wrong ?
Now I'm using FlyROM manilla and i still want to flash a factory rom
Hello!
Here is my story. 1 month ago I had install Leed Droid on my phone with partitions on card and everything was fine till I got some errors (like rebooting). So yesterday I had decide to go back to original ROM. Maybe I had done the steps wrong. Here is what I had done. First I had format my SD card in a SD reader to FAT32. And after that it had start my problems. The phone can not see the SD CARD and also the PC can't see the phone... so I can't install original ROM or put it on SD card to flash it from there if that is possible. I can go into bootloader and I had try to add files on SD card but can not see it it say:
can't mount /dev/block/mmcblk0p1
I had read abt this but coudn't solved the problems... so is posible to be USB bricked but I had follow the steps for that and didn't work... Any ideea?
P.S. I can boot Le3e Droid if I push recovery. But I can not install anything on card bc it can not see it
Here are the details of h-boot:
I have H-BOOT 0.93 0001
BRAVO PVT 1 SHIP S-OFF
MICROP 031D
TOUCHPANEL- SYNT0101
RADIO-5.17.05.08
Thanks!
It not necessarily bricked. It could just simply be that the format went wrong. Don't know on what OS you formatted it but windows isn't the tidiest in formating. Never experienced it on my phone but it happend to me with my digital camera. Camera wouldn't read it anymore. T
If you have access to an other sd card you could try flashing the rom from that card. I would test that first before you try something else.
Good luck
IT'S NOT BRICKED!
Had same issue before, fixed it easily just cant remember how... wait for some more experienced people.
Can't access SD card and PC doesn't see USB - can you help me?
This happened with me yesterday. To solve it, I partitioned the SD card in recovery, and everything seems to be fine so far
Well it can't see my card not even in recovery... so should I do the partition again? with EXT3 and fat 32? Personally I will like to go back to original ROM.
Yeah I couldn't see my card either, but going to advanced>partition sd card seemed to work.
where in advanced?
in recovery mode
Have you tried shut off the phone, pull of battery, put it back
Then press power + volume down
plug the phone
use RUU.exe ??
Sup dude, i hope this helps,
1st get another SD card, then format the card, full format not quick.
Then follow this guide, UNROOT By DoidZone
And see if that dont work for you.
My Desire stucks on the white htc-screen with the InsertCoin_GB_Sense2.1 A2SD+
I was trying reinstall so many times but without any success.
With InsertCoin_GB_Sense2.1 CM7 and RCMixSv07 all is ok.
The Desire is s-off, CWM3.0.0.5, Hboot CM7, 6,5GB fat32, 1 GB ext3 and 500MB swap.
Before installing I wiped all .
Pls. pls. pls. any ideas?
vancak said:
My Desire stucks on the white htc-screen with the InsertCoin_GB_Sense2.1 A2SD+
I was trying reinstall so many times but without any success.
With InsertCoin_GB_Sense2.1 CM7 and RCMixSv07 all is ok.
The Desire is s-off, CWM3.0.0.5, Hboot CM7, 6,5GB fat32, 1 GB ext3 and 500MB swap.
Before installing I wiped all .
Pls. pls. pls. any ideas?
Click to expand...
Click to collapse
Hey dude install the newest htc sync on your computer.
Then download the newest RUU for your phone then run it like any other program while your phone is connected to your computer. That should install your phones softwre the way it was when you got it. If tjat doesn't work try to reboot in hboot and then factory reset. Hope that helps.
Sent from my ADR6300 using XDA Premium App
I belive your desire is fine, and you just need sd card formating.
It happened to me four times.
Easiest way is to remove sd card from phone and put it into reader. My advice is usb reader. But sd reader will do also.
Download HP Usb formatting utility and format card. That will last some time. Now boot Gparted and format as you wish.
Or try with computer management disk and try to delete partitions on sd then format again.
Let me know if working.
Hello again!
I had buy another SD card and still my phone can't see he SD card...is not available... also the PC still don't see my phone... so I'm blocked to use Lee Droid. Of course can't do pics because of no SD card, can't injstal some programs...etc... I still wait for a solution from you... someone who had the same problem and fix it...
The only way my PC see the phone is when i go to bootloader... and if I try to run the RUU is starting... it say
: image version :version-main Failed (status read failed(too many links)) and if I push update
Thanks! is coming another screen it say:
from image version : version main FAILED (command write failed (unknown error) and when I push next it show it start the proces....waiting for bootloader and after that in 1 minute it say: error 171... the cable is not plugged.
Thx
Have you seen this ? http://forum.xda-developers.com/showpost.php?p=6696983&postcount=1
I had close to the same problem as well
Press & hold vol down and power on the phone
Select fastboot by pressing the power button
ADB commands
fastboot oem enableqxdm 0
fastboot reboot
That should fix your SD card not being detected.
Ok. I had try that but when I press power botton in fastboot it show me:
PB98DIAG.Zip loading...
Image not found
And it continue with other ... not found. So any ideea?
update:
Copied PD98IMG.zip to the SDcard, reobooted into recovery mode and it doesn't work!
On the HBOOT screen, I see:
Loading PD98DIAG.zip
Not found
Loading PD98DIAG.nbh
Not found
Loading PD98IMG.zip
Not found
Loading PD98IMG.nbh
Not found
Sent from my HTC Desire using XDA App
Even I am struck at the same position as the above post:
Loading...[PB99DIAG.zip]
No image!
Loading...[PB99DIAG.nbh]
No image or wrong image!
Loading...[PB99IMG.zip]
No image!
Loading...[PB99IMG.nbh]
No image or wrong image!
Except that mine is lookinh got PB99DIAG/img etc.
I have seen those comments about using the terminal emulator, but how to use it when the phone is not booted yet?
Also, adb devices does not show the device. So, not sure if the phone is correctly working.
Any next steps?
Nobody had find a solution?
Sent from my HTC Desire using XDA App
Well look like I will change my Desire with a Samsung Galaxy S II... promis to not try other tricks... till this stuff are not that simple.
Sent from my HTC Desire using XDA App
I have a usa number/ cdma programming, unlocked bootloader without issue. first cwm recovery I flashed was version 5 something. Sd card wouldn't mount. Tried cwm touch recovery, (version 6 something,) and it.wouldn't even start, just stayed at the dev warning / message screen for 6 or 7 min. Finally tried twrp CDMA recovery, and it works, just won't mount my sd card. In the recovery log, that's all it says, probably 50 times. "unable to mount sd card"
Anyone.have an idea what's going on? Phone.not.bricked, works.fine.when I boot normal system...
I'm lost...
Hammerdroid said:
I have a usa number/ cdma programming, unlocked bootloader without issue. first cwm recovery I flashed was version 5 something. Sd card wouldn't mount. Tried cwm touch recovery, (version 6 something,) and it.wouldn't even start, just stayed at the dev warning / message screen for 6 or 7 min. Finally tried twrp CDMA recovery, and it works, just won't mount my sd card. In the recovery log, that's all it says, probably 50 times. "unable to mount sd card"
Anyone.have an idea what's going on? Phone.not.bricked, works.fine.when I boot normal system...
I'm lost...
Click to expand...
Click to collapse
Back up your SD card to your PC before doing anything. Then boot your phone completely and go to the storage menu in settings. Choose "erase sd card", once it is finished erasing, reboot your phone and allow it to boot completely. Now reboot to recovery and your card should be recognized. Formating your card on your pc and adding files to it before putting it into the phone and allowing the phone to boot and properly set up the sd card , for some reason prevents the files added by the pc from being filed under the same file system that the phone uses. I had this same priblem with TWRP and CWM. I erased my card in the phone settings and then added the ROM zip and such via the USB storage option that comes when plugging the phone into the pc via a usb cable. I rebooted into recovery and all was right in the rooted world again.
Sent from my GT-P3113 using Tapatalk 2