How To Use er2003edit and what are the passwords ?? - Upgrading, Modifying and Unlocking

hi there i just upgraded to ROM Version : 2.06.00WWE ( mysteryman )
and when i hit soft reset i get the screen sayin "TEST ONLY NOT FOR SALE" i want to change tht spalsh screen and need details on it how can i change it...ive tried changing them by opening the ExtROM (ms_.nbf) with ER2003Edit but every time i try to open it i get a password error.
could any one please give me the detailed step by step guide on how to change the splash screeen pllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllz. !!!
My Device Currently Is :
Device : O2 XDA2
ROM Version : 2.06.00WWE ( mysteryman )
ROM Date : 06/14/04
Radio Version : 1.14.00
ExtROM version : 2.06.100a (mysteryman)
Thanks n regardsz.........jeetz.....

on the "file open dialog window" choose "Extended ROM" as file type instead of "autodetect"

also try this :
http://forum.xda-developers.com/viewtopic.php?t=14475

Related

change Qtek 9090 language. OK. Done.

I have Qtek 9090 with german windows, and i need to change it to english
ROM 1.22.01 GER
RADIO 1.06.00
EXT ROM 1.22.134 GER
I need everything, from drivers for win 98 (i can't find it anywhere), to ROM files and instruction how to not kill PDA
all you need is in the link of my signature
Thank you.
i can't download anything from there. - "File not found"
mendoza said:
i can't download anything from there. - "File not found"
Click to expand...
Click to collapse
nevermind, something wrong with my internet settings
I've just tried to update PDA using MaUprtadeUtnoID.exe, got error "no connection with device", and now Qtek just shows "serial" on top of the screen and "V2.06" on bottom of the screen, and when i connect USB cable, it shows "USB". thats all, no reaction to power on, no reaction to reset... Whats wrong? Is this the end?
sorry, false alarm
So much qestions, when doing something for the firs time...
mendoza, does this mean the upgrade worked?
I wasn't fully sure that the MaUpdradeUt_noID.exe method worked when I wrote that guide.
Yep, no problems. I've used it because normal update said: "This update is not for the model that you are trying to update... bla bla bla"
mendoza said:
I have Qtek 9090 with german windows, and i need to change it to english
ROM 1.22.01 GER
RADIO 1.06.00
EXT ROM 1.22.134 GER
I need everything, from drivers for win 98 (i can't find it anywhere), to ROM files and instruction how to not kill PDA
Click to expand...
Click to collapse
did you able to change the language buddy? how? i got same problem now, could you help me please.. id like to change my qtek9090 language from german to english.
many thanks... vic
philippines
vic pag-ong said:
did you able to change the language buddy? how? i got same problem now, could you help me please.. id like to change my qtek9090 language from german to english.
many thanks... vic
philippines
Click to expand...
Click to collapse
steps to change the language
You need a registry editor.
Say we want to add "T9englishLdb.dll"
- copy "T9englishLdb.dll" to \Windows
- go to [HKEY_LOCAL_MACHINE\T9 Input Method\MUI\Languages]
- it should be:
"Available"="0407"
- change it to:
"Available"="0407, 0409"
(if you want that T9 english to appers first, put 0409 first in that list.)
- go to: [HKEY_LOCAL_MACHINE\T9 Input Method\LDBs]
- add new string value "0409"="T9UenglishLdb.dll"
- reboot
vic pag-ong said:
did you able to change the language buddy? how? i got same problem now, could you help me please.. id like to change my qtek9090 language from german to english.
many thanks... vic
philippines
Click to expand...
Click to collapse
see here http://forum.xda-developers.com/showthread.php?t=758462

JASJAM afert Upgrading to WM6 Don't accept arabic

Dear all ..
please ...i try to upgrading my JASJAM to WM6 is okay and Every thing okay but when i need to install the arabic file i maen CAB file like ACERT_ARB &Default_APrayerTimes_JSJM_eula the arabic dosn't work and my device tell me this message (( can not ran in this device )) So can any one tell me how to Solved this problem ..
Best Regards
GSM system said:
Dear all .. [snip!]
Click to expand...
Click to collapse
Yep! That's right. If you're trying to install the cabs from i-mate then Imaginet's Arabizer is i-mate branded. Wait (a long time) for i-mate to release WM6 for JASJAM (if ever) or buy your own legit copy of the Arabizer suite.
Arabic on jasjam
Arabic runs with any WM6 version on the jasjam using the attached files (also available on imate jasjam Arabic ROM).
Procedure:
a- Mount your EXTROM using HERMES_MountALLExtROM.cab.
b- Copy the files to the jasjam EXTROM.
. . . 1- Default_ACERT_JSJM_eula.CAB . . . . . . . . . . 243 kb
. . . 2- Default_MultiLang_AR_JSJM_eula.CAB . . . . 755 kb
. . . 3- Default_Imate_WWE_HER_V3.30.00.cab . . . 87 kb *
. . . 4- Default_PT_Reg_FixKeyboard.cab . . . . . . . . . 2 kb *
c- Using File Explorer, run the files and install on the main memory.
*Files 3 and 4 enable Arabic text on the sliding keyboard.
You can install the rest of the suite the same way, or try: http://www.smartnetwireless.com/PocketIslamPPC.htm which is free of charge and can be installed from the computer on the SD card.
Salaam,
You must extract this font.zip in yuor windows directory before you install arabic.
These are arabic fonts.
Best regards
Good luck
Actually it is not necessary to install any extra fonts.
The way I do it is, I install Pocket Islam + Bukhari & Muslim hadeeth packages, I then install the 4 files mentioned above; afterwhich I perform the configuration.
thanks for every one replay to me the message i try to install the cab file but stilll the same problem my device tell me this message can not run in this device .....
respactfully
uploading the arabizer after upgrading to WM6
GSM system said:
thanks for every one replay to me the message i try to install the cab file but stilll the same problem my device tell me this message can not run in this device .....
respactfully
Click to expand...
Click to collapse
at this moment, i'm uploading to you the Arabizer of the JasJam after upgrading to WM6. and it's working perfectly on any Rom. tried and working.
here you go the arabic system and also working arabic on keyboard.
Here you go, download the file, extract it. and move it to your storage card, and instal it in order of the numbers as from 1 to 17.
You have a full arabic working system and keyboard as well.
enjoy
http://www.megaupload.com/?d=FF6T44YI
@ GSM system, “Please read the following carefully”.
After installing WM6 and all is well and the phone actually works:
1- Connect through the USB and copy the file (HERMES_MountALLExtROM.cab) to a folder on the phone.
2- Now on the phone, click start menu --> Programs --> File Explorer and find the file (HERMES_MountALLExtROM.cab) and click on it to install it.
3- Once installed, reset (reboot) your phone.
4- Once Windows up and running, you will notice through “Activesync” that you can see EXTROM folder and the files inside it.
5- Copy the 4 attached files to the EXTROM folder to run them from there.
6- Again, on the phone, click start menu --> Programs --> File Explorer and find the ExtROM folder, click on it to open and you will find the 4 files.
7- Install them one by one then reset your phone.
If the above description does not work for you, you need to write a step by step procedure of what exactly you are doing so that we may be able to tell you where you are going wrong.
Q- Are the file format changed when being copied?
thanks Mr. Simple i Appreciate it you brother ... but pleaes where is the file.(HERMES_MountALLExtROM.cab).
thanks to all ... i try to instill all the cab.file i maen the arabic lang but don't work ...i don't know why some device after upgrading to WM6 then instill the 17 cab file the arabic is work okay ...but some device also i-mate ..the arabic is dosen't work ...So ...where is the problem ..if can any one help me ....
best regards
I think with some wm6 roms (like the latest lsvw rom) the device is reset to be an htc tytn device instead of imate jasjam and that what is what is causing the message "cant be run on this device." As u notice when u upgrade to the latest lvsw rom, the device name is set to htc_tytn. This dose not happen on the latest black rom. This is just my thinking why is this happening. I hope someone can solve this issue as I am thinking of going back to black rom.
Salam,
I am glad I was able to help, I have attached the ExtRom mount file.
May I also add that the best version of WM6 for Arabic is LSVW of May 19 which I have been running for the past 4 days without a single problem. http://forum.xda-developers.com/showthread.php?t=307951
I have also attached Tahoma font file (not important).
Good luck.
Simple
Do you have Imate JasJam or a different one.
Also the 4 files attached are enough to run everything as what is seen on Jasjam or I have to add some more cabs.
Which pocket islam that is best for our device?
Thanks
I think the arabizer software is signed to work on Imate only
Sniper258 said:
Simple
Do you have Imate JasJam or a different one.
Also the 4 files attached are enough to run everything as what is seen on Jasjam or I have to add some more cabs.
Thanks
Click to expand...
Click to collapse
I think the arabizer software is signed to work on Imate only
My device is T Mobile Vario II which is exactlly like the JasJam and the Tytn ..etc.
I tried more than 7 WM6 ROMS, and many ways of installing the Arabizer. but always
got broaken Arabic letters and the message
"can not run on this device"
Please can you all indicate what are you devices brands. Thanks
The phone I have is an i-mate Jasjam, I have upgraded this phone more than 15 times between WM5, WM6, Radio and EXTROM. This is not the first Windows Mobile phone that I have neither it is the first time I install Arabic, In fact I had a role in Windows 98 and Windows 2000 Arabisation many moons ago.
My current configuration is: IPL=1.04, SPL=1.01 MFG, Radio=1.41, OS=WM6 17913 LVSW, EXTROM=cooked. I do not install a complete ROM, and I always install individual component using MTTY.EXE (except for the radio). Immediately after a new install, I fill in user and device info; I then install the Arabic software. Initially I had a problem with the Jasjam sliding keyboard until I identified files 3 and 4 responsible for its activation.
Please notice that:
1- If you manage to install i mate Arabic ROM (WM5)
JASJAM_Arabic_1.20.305.3_1.20.304.104_1.07.03.10_ship.zip available on ftp://ftp.clubimate.com/ . Arabic should be fully functional and we should no longer talk about hardware. Be very careful, things could go wrong.
2- If you install Pocket Islam suite, you will be able to view and type Arabic using the screen keyboard (there may be a RTL problem when writing Arabic).
3- You can install the Pocket Arabiser Suite from http://www.imaginet-software.com/index.aspx?p=arabizer. It should work with any windows mobile device, but the keyboard will not. You know what to do (files 3 and 4).
4- I am not sure if the Arabisation software checks for a Jasjam signature, if such, you may need to install one or all:
. . . Default_MT_PC_Hermes_Generic_REG_060609.CAB
. . . Default_AHermesKBFlag_JSJM_eula.CAB
. . . Default_PP_KeyBoard_Layout.cab
. . . Default_PP_Version.cab
5- Try a clean EXTROM with only Arabic files in it, in case particular files are preventing Arabic files from running.
6- Try the way I do it (review my previous post) it may work for you then you can uninstall the software you do not need.
I apologize for the lengthy post, but I felt it may be important to a lot of people.
Good luck.
Dear Mr. Simple ....
i am thankfull caz you are Support this sabjact ....i have i-mate JASJAM after upgrading to WM6 no accept Arabic that is the problem ..i try any mathed to install arabic but dosen't work ...your mathed and more but no way so please if you can help me ..Mr. Simple to fixed this problem ...
with my best regards
@ GSM system,
Do not worry, if it works for me, it should work for you. Try the following:
1- Download the WM5 jasjam ROM from imate site (mentioned in my previous post).
2- Extract the EXTROM.nb file (this is the complete jasjam extended rom)
3- using MTTY.EXE install it to the phone like this:
USB> task 32
USB> lnb ExtROM.nb 57500000
USB> task 8
3- Ensure you have WM6 (preferably LVSW as it installs the extended rom automatically) is installed.
4- Press (Left Soft Key + Right Soft Key + Reset) all at once and install the whole lot.
5- If it does not install automatically, mount the EXTROM and run Autorun.exe.
I hope you understand that the problem is not in the method/s provided, the problem is in applying them (or your hardware, which is unlikely). Concentrate on using the exact files provided and ensuring the steps are followed carefully.
Now, please notice saying "i try any mathed to install arabic but dosen't work ...your mathed and more but no way so please if you can help me" does not help much. You need to list the exact steps you are executing, at what stage an error appears and the error message.
If all fails, see if you can install the full jasjam WM5 ROM and if Arabic works for you then, if it does not, you may have a Hardware fault.
Can you also tell us; when you bought the phone was Arabic installed on it?
Important: A large number of this forum visitors are people with issues/problems or with development interests. Please have them in mind and ensure that your writing is as clear and descriptive as possible to help them or to enable them to contribute effectively .
Good luck.
Dear Simple ..
i am so sorry to bother you but i don't have any one to helpe me just you the problem now i don't have the Mtty.exe how to find this ...the my another qustion this mathed do by MS dos or how can i do it this ......
respactfully
@ GSM system,
You still did not come back with what I asked for, a step by step scenario and the error message!!
You need to do a lot of reading, please refer to:http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes and go through some tutorials.
Also to: http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG where you will find mtty.exe inside the SPL-1.01MFG_Pack.zip file.
I can only tell you 4 points that may save you time when trying to connect:
1- The file you need to load using mtty must be .nb (like EXTROM.nb)
2- to be able to connect the device must be in the IPL SPL page (color screen) to get there press (Power button + OK button + reset) release the reset then the other two.
3- to be able to connect using mtty you must disable activesync USB connection, do the following: right click on the Activesync icon on the task bar, then click on Connection Settings... and uncheck Allow USB connections.
4- It is best to have the file you wish to upload to the phone in the same folder as mtty.exe.
You are now in dangerous territory, navigate very very carefully; you could end up damaging your phone, what you want to learn is not difficult and already on the forum. Make sure you read the WIKI properly and use the search option of this board.
Good luck.

i780PCSHK3 Upgrader VISTA Guide

As all we know we have been waiting official wm6.1 rom upgrade and mike-wasowsky named user made a big suprise! he gave us the links of wm6.1 roms for i780. I downloaded rom i780PCSHK3 and modified with an hex editor ( I would like to thank many time to melgurth to show how we can edit exe file ) then I installed rom yesterday night.no more problem during installation and phone is working very well. Now there is a mini guide how to do it;
1.) http://fus.samsungmobile.com/i780/NE/PCSHK/i780PCSHK3_Upgrader_XP.exe
http://fus.samsungmobile.com/i780/NE/PCSHK3/i780PCSHK3_Upgrader_VISTA.exe
http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970107&coflag=0 (it is modem driver it needs to be downloaded for xp )
http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970108&coflag=0 ( it is for vista ) install modem drivers firstly then you can install rom exe files.
2.) download an hex editor i preffered HxD as editor like melgurth and choose one of these exe files given above and at the end of last line at editor you will see the version of rom ( it is seen as i780CS) change it with your version ( mine was i780pdxhi1 so u will change that line i780DX) then save as you exe file somewhere on your pc. by the way
3.) Start exe file which is edited by yourself.the progress is shown at pc when rom download is finished then unplug your usb cable and power on your i780 wait for a while and there will come Language settings choose which language you want then system will be in that language
4.) as final, there is no operator settings in system tab it means you have to add mms and internet settings by manually.if there is a cab file for it can you share with us?
5.) screenshots
new screenshots how to edit exe
according to previous post's explanations...
What is the i780PCSHK3 for language? I can't find any codes with CS? It's a provider customized?
yes it is belong to telenord telekom you can choose the language you want after rom installation process. and there is no operator logo or skin. just i needed is to have mms and internet settings of my gsm provider.because there is no shortcut to operator settings.you should enter it manually.i dont know do we have any chance to import a cab file from other version of i780 roms for operator settings?
My mouse stopped working... only DPAD with up/down works...
where could be the problem?
edit:
I have realvga installed. But it worked after some resets. so I don't think there is the problem located. Probably PQzII (for scroll buttons remapping)?
What I also noticed is that when I push an icon in a menu it scrolles to the bottom :/ only pushing longer on an icon it opens the tool...
.. try typing a COMMA (, .. the one on the righ side of the space button) - you will get a "ä" instead of the COMMA.. any idea how to fix this please?
Thanks for your post, but the XP upgrader link not working. Can you provide anyother link ? Thanks
Yes the XP Link seems to be out of order I mean what is the size there is no information of the file size. Keeps on downloading endlessly! Please upload the XP ROM to a downloading site and post the links. Benveq did you use the vista rom or the xp one? Which is better?
Thanks for the links.
it appears the xp link is dead, the file is not available at server.
Please post the new link...thanks
Hello
There is also the German language?
Can you update on the German 780 update?
Can someone has a step-by-step instructions make?
Greeting Stanly1902
benveq said:
.......................
2.) download an hex editor i preffered HxD as editor like melgurth and choose one of these exe files given above and at the end of last line at editor you will see the version of rom ( it is seen as i780CS) change it with your version ( mine was i780pdxhi1 so u will change that line i780DX) then save as you exe file somewhere on your pc. by the way
Click to expand...
Click to collapse
I have pda part as i780PDXHI1 and the Phone Part as i780PUHJ2 should I edit to i780DX or to i780PU ??????
Having problems downloading the XP versio of the ROM. Please can some one post it at some other site?
try this one
http://fus.samsungmobile.com/i780/NE/PCSHK3/i780PCSHK3_Upgrader_XP.exe
BR
Yes this link works
http://fus.samsungmobile.com/i780/NE/PCSHK3/i780PCSHK3_Upgrader_XP.exe
Download speed is also ok with the help of a download acclerator
There is this link ,which has a cab file for operator(internet/wap/mms) settings.
http://forum.xda-developers.com/showthread.php?t=340586
I dont know if it works with i 780
Quick Guide
1. Download ROM from
http://fus.samsungmobile.com/i780/NE/PCSHK3/i780PCSHK3_Upgrader_XP.exe
2. Open the file (EXE) with winrar in a new folder
3. Open CSHK3_XP.EXE with HxD editor
4. From search menü: replace i780CS with i780DX (I used DX since I was using DXH1 as the PDA Part) save and replace CSHK3_XP.EXE file
5. Run setup.exe for the USB drivers and the other setup from unpacked new folder to install modem
6. Start CSHK3_XP.EXE (which you modified) and rom begin upgrading eboot+PDA+Phone. Detect Phone ( Tick mark all the components make sure device is charged fully and you have synchronised with active sync)
7. After upgrade completed and i780 restart set language and the device is ready
8. SPB Backuped up file from old rom insures you get the settings back.
9. Enjoy with new ROM and post any shortcomngs problems here.
Thanks to XANADU!
inertiax3 said:
.. try typing a COMMA (, .. the one on the righ side of the space button) - you will get a "ä" instead of the COMMA.. any idea how to fix this please?
Click to expand...
Click to collapse
Yes you are correct get this funny beahviour when try to type "," Any fixes any one????
Can you guys change your key mappings in personal/Buttons?
Message and GPS button (always opens Meessaging) do not work correctly after remapping them...
strange
I also am not able to drag n drop via DPAD ?!
please use function+sms for comma.........
dbsoundz said:
Can you guys change your key mappings in personal/Buttons?
Message and GPS button (always opens Meessaging) do not work correctly after remapping them...
strange
Click to expand...
Click to collapse
Could this be a problem like it is with the comma?
shailyait said:
please use function+sms for comma.........
Click to expand...
Click to collapse
thanx, that works .. but is it possible to change the HW keyboard layout somehow?

IPAQ 114 - language change failed

It works now !!!!
Hi all,
hope anyone can help me:
I have a IPAQ 114 WWE and need to patch it to german - it's for my wife.
So I walked through many posts and got many ideas to do this, but none of them worked:
1. Downloaded SP38871 and SP38992 and substituted HPImage.nbf while updating. 20 times or more - but failed.
The result was either an
- update with WWE or a
- warning that the image doesn't match or a
- hang of the update tool
with a stuck in RUU download mode.
2. Did the same with a modifided USB cable (to unplug AC power) to bypass language check (and to substitute HPImage.nbf) - failed.
3. Opened german HPImage.nbf with HEXED and substuted GER hints with WWE but I didn't really know where this is requested - so this didn't work.
4. Downloaded bldiag.nb0, modified HPImage.nbf - removed first 12 bytes and renamed to HPImage.bin. Then copied the two files to a new formated SD card and put it into the IPAQ SD slot. Then hard resetted the IPAQ to clean boot - but the device booted again into WWE.
Do you have any idea, what was my mistake? I know one ...
Did HP additional steps to prevent lanuage changes - there is an additional hpRUUres_GER.dll in the german ROM update?
Concerning actions 3 and 4: Can anyone help me with information what really happens when
- the language information in the HPImage.nbf needs to be changed or
- a ROM image on a SD card should patch from WWE to german?
Thank you in advance!!!
It works now - IPAQ 114 language change ...
Could now change the language from WWE to GER.
The substitution of HPImage.nbf was the solution.
What was different to the trials before:
1. Didn't use the SP38871 with the WWE HPImage.nbf but used the SP38992 (GER) tool with the WWE HPImage.nbf
- Thanks to littlemonkey for his french screenshot !!!!
2. wrote a two line cmd script to move the WWE HPImage.nbf and GER HPImage.nbf between the folders (3 of them to avoid any warning):
move C:\iPAQ114\de\HPImage.nbf C:\iPAQ114\en
move C:\iPAQ114\dex\HPImage.nbf C:\iPAQ114\de
This is faster then overwriting WWE HPImage.nbf
3. Got exactly the right moment to move WWE HPImage.nbf:
The progress bar of hpRUU.exe had not started to move and before (!!!) the "RUU download mode" screen appeared.
Hope this helps you!

[ROM][WWE] 2D Manila v.1.20 WM6.5.3 build 23152 [Dec 22 2010 ]

ROM WWE MANILA 2D new WM 6.5 build
Contens:
MANILA 2D v.1.20
Album
Audio Manager
Animation
Arcsoft MMS
Camera 6.13
BT ftp
Comm Manager
Ez Input Keybord
FMRadio
QuickGPS
Hibernate
Java Jblend
Voice Speed Dial
Wi-Fi
WM5torage
Internet Explorer 6
Messenger
NetCF 3.7
Office 2010
WindowsLive
BUTTONS:
Button 1 - left - Comm Manager
Button 4 - right - Internet Explorer
Button 5 - Camera
Button 6 Hold - Voice Speed Dial
Soft button left - Tasks Manager
Soft button right - Hibernate
Free memory - 23 Mb maximum after RESET (PagePool = 6 Mb)
build 23152.5.3.12 (Windows CE: 5.2 Build 4175 Tuesday, November 23, 2010 2:29:41)
http://hotfile.com/dl/91115330/e938744/23152_M2D_PP6__ArteImg_0409.rar.html
not working for me: it says check your update utility!!!
rom
error244:invalid model id
ROM Update Utility for all HTC devices
the nbh file has 70 mb.....i don't think this rom is for artemis.
artimis rom
me30 - tanx
Still not working: invalid model id !!!
Screenshot?
ROM tested in Artemis device ID "Arte100", work fine.
rom looks good but still the same problem on p3300: invalid model id. and i have tried with the correct uspl tools !
device id
wrong device ID!
ROM tested in Artemis device ID "Arte100", work fine.
screenshot
screenshot please.
butthead- said:
wrong device ID!
Click to expand...
Click to collapse
of course wrong device ID, because your device is not CID Unlock :
try to CID Unlock ..... before you do the Flash ROM
Screenshots - first post
Úspěch
Thanks, great rom. After the CID unlock everything works OK ...
Please use this link http://forum.xda-developers.com/showthread.php?t=400445 to help me ...
Still not working!Wrong model id!
I already did cid unlock!
What can i try next?
Hakim Rahman said:
of course wrong device ID, because your device is not CID Unlock :
try to CID Unlock ..... before you do the Flash ROM
Click to expand...
Click to collapse
CID unlock > 2% - Error 228 invalid file size...
emulatorka said:
CID unlock > 2% - Error 228 invalid file size...
Click to expand...
Click to collapse
It indicates that the file was corrupt nbh...
ROM tested in Artemis device ID "Arte100", work fine

Categories

Resources